Hi, This patch series adds I2C support for MT8365-EVK board. The I2C-0 is enabled, it can be used through the board pin header, as described directly on the PCB. This series depends to another one which add support for MT8365 SoC and EVK board. Link [1] One patch has been cherry-picked from [2], so I've addressed the comment and kept the trailer. Regards, Alex [1]: https://lore.kernel.org/linux-mediatek/20230101220149.3035048-1-bero@xxxxxxxxxxxx/ [2]: https://lore.kernel.org/all/20220531135026.238475-2-fparent@xxxxxxxxxxxx/ To: Qii Wang <qii.wang@xxxxxxxxxxxx> To: Rob Herring <robh+dt@xxxxxxxxxx> To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@xxxxxxxxxx> To: Matthias Brugger <matthias.bgg@xxxxxxxxx> Cc: linux-i2c@xxxxxxxxxxxxxxx Cc: devicetree@xxxxxxxxxxxxxxx Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx Cc: linux-mediatek@xxxxxxxxxxxxxxxxxxx Cc: linux-kernel@xxxxxxxxxxxxxxx Cc: Fabien Parent <fparent@xxxxxxxxxxxx> Cc: Rob Herring <robh@xxxxxxxxxx> Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx> Signed-off-by: Alexandre Mergnat <amergnat@xxxxxxxxxxxx> --- Changes in v2: - Drop the patch which do useless change in i2c-mt65xx.c driver. - Change 2 lines compatible/reg in oneline. - Link to v1: https://lore.kernel.org/r/20221122-mt8365-i2c-support-v1-0-4aeb7c54c67b@xxxxxxxxxxxx --- Alexandre Mergnat (2): arm64: dts: mediatek: add i2c support for mt8365 SoC arm64: dts: mediatek: enable i2c0 for mt8365-evk board Fabien Parent (1): dt-bindings: i2c: i2c-mt65xx: add binding for MT8365 SoC .../devicetree/bindings/i2c/i2c-mt65xx.yaml | 4 ++ arch/arm64/boot/dts/mediatek/mt8365-evk.dts | 19 ++++++++ arch/arm64/boot/dts/mediatek/mt8365.dtsi | 52 ++++++++++++++++++++++ 3 files changed, 75 insertions(+) --- base-commit: 8b6cfcce3ce939db11166680a57253c39110f07e change-id: 20221122-mt8365-i2c-support-fc048da261ea Best regards, -- Alexandre Mergnat <amergnat@xxxxxxxxxxxx>
