Re: [PATCH -next 1/2] i2c: designware: Switch from using MMIO access to SMN access

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Jan 16, 2023 at 11:19:00AM +0100, Jan Dąbroś wrote:
> Hi Borislav,
> 
> > Make init_amd_nbs() arch_initcall_sync() so that it executes after PCI init.
> 
> I described earlier in this thread why such option is not working -
> let me quote myself:
> 
> It's not enough for running init_amd_nbs() to have only
> pci_arch_init() done. We need the pci bus to be created and registered
> with all devices found on the bus. We are traversing through them and
> trying to find northbridge VID/DID. Due to the above, we need to run
> init_amd_nbs() only after acpi_scan_init() that is invoked from
> acpi_init() which is registered as subsys_initcall. That's why the
> trick with switching init_amd_nbs() to arch_initcall_sync will not
> work.
> 
> We have a kind of chicken-and-egg problem here. Or is there something I missed?
> 
> I wonder if there is upstreamable option to control order of the
> drivers' init by forcing link order?

But what exactly do you need from North Bridge? Is it only its existence or
do you need to have fully instantiated PCI device (if so, why?)?

-- 
With Best Regards,
Andy Shevchenko





[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux