[PATCH] i2c: qcom-geni: fix missing clk_disable_unprepare()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add missing clk_disable_unprepare() in the error path in geni_i2c_probe().

Fixes: 14d02fbadb5d ("i2c: qcom-geni: add desc struct to prepare support for I2C Master Hub variant")
Signed-off-by: Yang Yingliang <yangyingliang@xxxxxxxxxx>
---
 drivers/i2c/busses/i2c-qcom-geni.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c
index fd70794bfcee..f292e4dab98f 100644
--- a/drivers/i2c/busses/i2c-qcom-geni.c
+++ b/drivers/i2c/busses/i2c-qcom-geni.c
@@ -859,6 +859,7 @@ static int geni_i2c_probe(struct platform_device *pdev)
 	ret = geni_se_resources_on(&gi2c->se);
 	if (ret) {
 		dev_err(dev, "Error turning on resources %d\n", ret);
+		clk_disable_unprepare(gi2c->core_clk);
 		return ret;
 	}
 	proto = geni_se_read_proto(&gi2c->se);
@@ -878,8 +879,10 @@ static int geni_i2c_probe(struct platform_device *pdev)
 		/* FIFO is disabled, so we can only use GPI DMA */
 		gi2c->gpi_mode = true;
 		ret = setup_gpi_dma(gi2c);
-		if (ret)
+		if (ret) {
+			clk_disable_unprepare(gi2c->core_clk);
 			return dev_err_probe(dev, ret, "Failed to setup GPI DMA mode\n");
+		}
 
 		dev_dbg(dev, "Using GPI DMA mode for I2C\n");
 	} else {
@@ -892,6 +895,7 @@ static int geni_i2c_probe(struct platform_device *pdev)
 
 		if (!tx_depth) {
 			dev_err(dev, "Invalid TX FIFO depth\n");
+			clk_disable_unprepare(gi2c->core_clk);
 			return -EINVAL;
 		}
 
-- 
2.25.1




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux