Re: [PATCH v3 0/6] soc: qcom: add support for the I2C Master Hub

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Dec 01, 2022 at 11:49:21PM +0100, Wolfram Sang wrote:
> On Tue, Nov 29, 2022 at 03:47:00PM +0100, Neil Armstrong wrote:
> > The I2C Master Hub is a stripped down version of the GENI Serial Engine
> > QUP Wrapper Controller but only supporting I2C serial engines without
> > DMA support.
> > 
> > The I2C Master Hub only supports a variant of the I2C serial engine with:
> > - a separate "core" clock
> > - no DMA support
> > - non discoverable fixed FIFO size
> > 
> > Since DMA isn't supported, the wrapper doesn't need the Master AHB clock
> > and the iommus property neither.
> > 
> > This patchset adds the bindings changes to the QUPv3 wrapper and I2C serial
> > element bindings to reflect the different resources requirements.
> > 
> > In order to reuse the QUPv3 wrapper and I2C serial element driver support,
> > the I2C Master Hub requirements are expressed in new desc structs passed
> > as device match data.
> 
> Is everyone fine if I take all this via the I2C tree?

I did this now.

All applied to for-next, thanks!

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux