Re: [PATCH v5 3/8] dt-bindings: media: add bindings for TI DS90UB913

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



I missed one issue.

On Sun, Dec 11, 2022 at 07:13:10PM +0200, Laurent Pinchart wrote:
> Hi Tomi,
> 
> Thank you for the patch.
> 
> On Thu, Dec 08, 2022 at 12:40:01PM +0200, Tomi Valkeinen wrote:
> > Add DT bindings for TI DS90UB913 FPDLink-3 Serializer.
> > 
> > Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
> > ---
> >  .../bindings/media/i2c/ti,ds90ub913.yaml      | 121 ++++++++++++++++++
> >  1 file changed, 121 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/media/i2c/ti,ds90ub913.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/media/i2c/ti,ds90ub913.yaml b/Documentation/devicetree/bindings/media/i2c/ti,ds90ub913.yaml
> > new file mode 100644
> > index 000000000000..3a5b34c6bb64
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/i2c/ti,ds90ub913.yaml
> > @@ -0,0 +1,121 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/media/i2c/ti,ds90ub913.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Texas Instruments DS90UB913 FPD-Link 3 Serializer
> 
> I think TI consistently writes it "FPD-Link III". If you rename it,
> please do so through the whole series.
> 
> > +
> > +maintainers:
> > +  - Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
> > +
> > +description:
> > +  The TI DS90UB913 is an FPD-Link 3 video serializer for parallel video.
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - ti,ds90ub913a-q1
> 
> Is the -q1 suffix needed, are there other variants ?
> 
> > +
> > +  '#gpio-cells':
> > +    const: 2
> > +
> > +  gpio-controller: true
> > +
> > +  clocks:
> > +    maxItems: 1
> > +    description:
> > +      Reference clock connected to the CLKIN pin.
> > +
> > +  clock-names:
> > +    items:
> > +      - const: clkin
> > +
> > +  '#clock-cells':
> > +    const: 0
> > +
> > +  ports:
> > +    $ref: /schemas/graph.yaml#/properties/ports
> > +
> > +    properties:
> > +      port@0:
> > +        $ref: /schemas/graph.yaml#/$defs/port-base
> > +        unevaluatedProperties: false
> > +        description: CSI-2 input port

This should be "Parallel input port".

> > +
> > +        properties:
> > +          endpoint:
> > +            $ref: /schemas/media/video-interfaces.yaml#
> > +            unevaluatedProperties: false

Should at least the bus-width property be mandatory, as the device
supports both 10- and 12-bit inputs ?

> > +
> > +      port@1:
> > +        $ref: /schemas/graph.yaml#/properties/port
> > +        unevaluatedProperties: false
> > +        description: FPD-Link 3 output port
> 
> I'd add
> 
>     required:
>       - port@0
>       - port@1
> 
> Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> 
> > +
> > +  i2c:
> > +    $ref: /schemas/i2c/i2c-controller.yaml#
> > +    unevaluatedProperties: false
> > +
> > +required:
> > +  - compatible
> > +  - '#gpio-cells'
> > +  - gpio-controller
> > +  - '#clock-cells'
> > +  - ports
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/gpio/gpio.h>
> > +
> > +    serializer {
> > +      compatible = "ti,ds90ub913a-q1";
> > +
> > +      gpio-controller;
> > +      #gpio-cells = <2>;
> > +
> > +      clocks = <&clk_cam_48M>;
> > +      clock-names = "clkin";
> > +
> > +      #clock-cells = <0>;
> > +
> > +      ports {
> > +        #address-cells = <1>;
> > +        #size-cells = <0>;
> > +
> > +        port@0 {
> > +          reg = <0>;
> > +          ub913_in: endpoint {
> > +            remote-endpoint = <&sensor_out>;
> > +          };
> > +        };
> > +
> > +        port@1 {
> > +          reg = <1>;
> > +          endpoint {
> > +            remote-endpoint = <&deser_fpd_in>;
> > +          };
> > +        };
> > +      };
> > +
> > +      i2c {
> > +        #address-cells = <1>;
> > +        #size-cells = <0>;
> > +
> > +        sensor@48 {
> > +          compatible = "aptina,mt9v111";
> > +          reg = <0x48>;
> > +
> > +          clocks = <&fixed_clock>;
> > +
> > +          port {
> > +            sensor_out: endpoint {
> > +              remote-endpoint = <&ub913_in>;
> > +            };
> > +          };
> > +        };
> > +      };
> > +    };
> > +...

-- 
Regards,

Laurent Pinchart



[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux