.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Reviewed-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> Link: https://lore.kernel.org/lkml/20221118224540.619276-572-uwe@xxxxxxxxxxxxxxxxx Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx> --- drivers/tty/serial/sc16is7xx.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c index 29c94be09159..abad091baeea 100644 --- a/drivers/tty/serial/sc16is7xx.c +++ b/drivers/tty/serial/sc16is7xx.c @@ -1666,9 +1666,9 @@ MODULE_ALIAS("spi:sc16is7xx"); #endif #ifdef CONFIG_SERIAL_SC16IS7XX_I2C -static int sc16is7xx_i2c_probe(struct i2c_client *i2c, - const struct i2c_device_id *id) +static int sc16is7xx_i2c_probe(struct i2c_client *i2c) { + const struct i2c_device_id *id = i2c_client_get_device_id(i2c); const struct sc16is7xx_devtype *devtype; struct regmap *regmap; @@ -1709,7 +1709,7 @@ static struct i2c_driver sc16is7xx_i2c_uart_driver = { .name = SC16IS7XX_NAME, .of_match_table = sc16is7xx_dt_ids, }, - .probe = sc16is7xx_i2c_probe, + .probe_new = sc16is7xx_i2c_probe, .remove = sc16is7xx_i2c_remove, .id_table = sc16is7xx_i2c_id_table, }; -- 2.39.1
