From: Stefan Wahren <stefan.wahren@xxxxxxxx>
[ Upstream commit 78a4471fa1a76a8bef4919105de67660a89a1e9b ]
During boot of I2SE Duckbill the kernel log contains a
confusing error:
Failed to request dma
This is caused by i2c-mxs tries to request a not yet available DMA
channel (-EPROBE_DEFER). So suppress this message by using
dev_err_probe().
Signed-off-by: Stefan Wahren <stefan.wahren@xxxxxxxx>
Reviewed-by: Fabio Estevam <festevam@xxxxxxxxx>
Signed-off-by: Wolfram Sang <wsa@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/i2c/busses/i2c-mxs.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c
index 68f67d084c63..b353732f593b 100644
--- a/drivers/i2c/busses/i2c-mxs.c
+++ b/drivers/i2c/busses/i2c-mxs.c
@@ -826,8 +826,8 @@ static int mxs_i2c_probe(struct platform_device *pdev)
/* Setup the DMA */
i2c->dmach = dma_request_chan(dev, "rx-tx");
if (IS_ERR(i2c->dmach)) {
- dev_err(dev, "Failed to request dma\n");
- return PTR_ERR(i2c->dmach);
+ return dev_err_probe(dev, PTR_ERR(i2c->dmach),
+ "Failed to request dma\n");
}
platform_set_drvdata(pdev, i2c);
--
2.39.0
