If pm runtime resume fails the .remove callback used to exit early. This
resulted in an error message by the driver core but the device gets
removed anyhow. This lets the registered i2c adapter stay around with an
unbound parent device.
So only skip clk disabling if resume failed, but do delete the adapter.
Fixes: 8b9ec0719834 ("i2c: Add Spreadtrum I2C controller driver")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
---
drivers/i2c/busses/i2c-sprd.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/i2c/busses/i2c-sprd.c b/drivers/i2c/busses/i2c-sprd.c
index 4fe15cd78907..ffc54fbf814d 100644
--- a/drivers/i2c/busses/i2c-sprd.c
+++ b/drivers/i2c/busses/i2c-sprd.c
@@ -576,12 +576,14 @@ static int sprd_i2c_remove(struct platform_device *pdev)
struct sprd_i2c *i2c_dev = platform_get_drvdata(pdev);
int ret;
- ret = pm_runtime_resume_and_get(i2c_dev->dev);
+ ret = pm_runtime_get_sync(i2c_dev->dev);
if (ret < 0)
- return ret;
+ dev_err(&pdev->dev, "Failed to resume device (%pe)\n", ERR_PTR(ret));
i2c_del_adapter(&i2c_dev->adap);
- clk_disable_unprepare(i2c_dev->clk);
+
+ if (ret >= 0)
+ clk_disable_unprepare(i2c_dev->clk);
pm_runtime_put_noidle(i2c_dev->dev);
pm_runtime_disable(i2c_dev->dev);
--
2.39.1
