Re: [RFC] i2c: core: Do not enable wakeup by default

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Tue, Feb 07, 2023 at 09:33:55AM -0700, Raul Rangel wrote:
> Sorry, resending in plain text mode.
> 
> On Tue, Feb 7, 2023 at 12:25 AM Mika Westerberg
> <mika.westerberg@xxxxxxxxxxxxxxx> wrote:
> >
> > After commit b38f2d5d9615 ("i2c: acpi: Use ACPI wake capability bit to
> > set wake_irq") the I2C core has been setting I2C_CLIENT_WAKE for ACPI
> > devices if they announce to be wake capable in their device description.
> > However, on certain systems where audio codec has been connected through
> > I2C this causes system suspend to wake up immediately because power to
> > the codec is turned off which pulls the interrupt line "low" triggering
> > wake up.
> >
> > Possible reason why the interrupt is marked as wake capable is that some
> > codecs apparently support "Wake on Voice" or similar functionality.
> 
> That's generally a bug in the ACPI tables. The wake bit shouldn't be
> set if the power domain for the device is powered off on suspend. The
> best thing is to fix the ACPI tables, but if you can't, then you can
> set the ignore_wake flag for the device:
> https://github.com/torvalds/linux/blob/master/drivers/gpio/gpiolib-acpi.c#L31.
> If that works we can add a quirk for the device:
> https://github.com/torvalds/linux/blob/master/drivers/gpio/gpiolib-acpi.c#L1633.

I think (hope) these systems are not yet available for public so there
is a chance that the tables can still be fixed, without need to add any
quirks.

@Amadeusz, @Cezary, if that's the case I suggest filing a bug against
the BIOS.

> > In any case, I don't think we should be enabling wakeup by default on
> > all I2C devices that are wake capable. According to device_init_wakeup()
> > documentation most devices should leave it disabled, with exceptions on
> > devices such as keyboards, power buttons etc. Userspace can enable
> > wakeup as needed by writing to device "power/wakeup" attribute.
> 
> Enabling wake by default was an unintended side-effect. I didn't catch
> this when I wrote the patch :/ It's been exposing all the incorrect
> ACPI configurations for better or worse. Mario pushed a patch up
> earlier to disable thes Wake GPIOs when using S3:
> https://github.com/torvalds/linux/commit/d63f11c02b8d3e54bdb65d8c309f73b7f474aec4.
> Are you having problems with S3 or S0iX?

I think this case is S0ix.

> > Reported-by: Amadeusz Sławiński <amadeuszx.slawinski@xxxxxxxxxxxxxxx>
> > Signed-off-by: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
> > ---
> > Hi,
> >
> > Sending this as RFC because I'm not too familiar with the usage of
> > I2C_CLIENT_WAKE and whether this is something that is expected behaviour
> > in users of I2C devices. On ACPI side I think this is the correct thing
> > to do at least.
> >
> >  drivers/i2c/i2c-core-base.c | 2 +-
> >  1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c
> > index 087e480b624c..7046549bdae7 100644
> > --- a/drivers/i2c/i2c-core-base.c
> > +++ b/drivers/i2c/i2c-core-base.c
> > @@ -527,7 +527,7 @@ static int i2c_device_probe(struct device *dev)
> >                         goto put_sync_adapter;
> >                 }
> >
> > -               device_init_wakeup(&client->dev, true);
> > +               device_init_wakeup(&client->dev, false);
> 
> This would be a change in behavior for Device Tree. Maybe you can
> declare a `bool enable_wake = true`, then in the ACPI branch
> (https://github.com/torvalds/linux/blob/master/drivers/i2c/i2c-core-base.c#L495)
> set `enable_wake = false`. This would keep wakes enabled by default on
> device tree and disabled for ACPI. This matches the original behavior
> before my patch.

I don't think it's a good idea to make the behaviour different. Drivers
in general do not need to know whether the device was enumerated on ACPI
or DT or whatnot. Same goes for users who should expect similar
behaviour on the same device.

I wonder what is the reason why I2C bus does this for all wake capable
devices in the first place? Typically it should be up to the user to
enable them not the opposite.



[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux