Here we don't have to write SMBHSTCNT in each iteration of the loop.
Bit SMBHSTCNT_START is internally cleared immediately, therefore
we don't have to touch the value of SMBHSTCNT until the last byte.
Signed-off-by: Heiner Kallweit <hkallweit1@xxxxxxxxx>
---
drivers/i2c/busses/i2c-i801.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 7641bd0ac..e1350a8cc 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -677,11 +677,11 @@ static int i801_block_transaction_byte_by_byte(struct i801_priv *priv,
for (i = 1; i <= len; i++) {
if (i == len && read_write == I2C_SMBUS_READ)
smbcmd |= SMBHSTCNT_LAST_BYTE;
- outb_p(smbcmd, SMBHSTCNT(priv));
if (i == 1)
- outb_p(inb(SMBHSTCNT(priv)) | SMBHSTCNT_START,
- SMBHSTCNT(priv));
+ outb_p(smbcmd | SMBHSTCNT_START, SMBHSTCNT(priv));
+ else if (smbcmd & SMBHSTCNT_LAST_BYTE)
+ outb_p(smbcmd, SMBHSTCNT(priv));
status = i801_wait_byte_done(priv);
if (status)
--
2.39.2
