From: Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxxxxx>
In case the hold bit is not needed we are carring the old values
fix the same by resetting the bit when not needed.
Fixes the sporadic i2c bus lockups on National Instruments
Zynq-based devices.
Fixes: df8eb5691 : ("i2c: Add driver for Cadence I2C controller")
Acked-by: Michal Simek <michal.simek@xxxxxxxxxx>
Reported-and-tested-by: Kyle Roeschley <kyle.roeschley@xxxxxx>
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxxxxx>
---
v3:
Add fixes and Ack
v2:
Update commit log
Also check if the hold_flag
drivers/i2c/busses/i2c-cadence.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/i2c/busses/i2c-cadence.c b/drivers/i2c/busses/i2c-cadence.c
index b136057..b2b3df1 100644
--- a/drivers/i2c/busses/i2c-cadence.c
+++ b/drivers/i2c/busses/i2c-cadence.c
@@ -382,8 +382,10 @@ static void cdns_i2c_mrecv(struct cdns_i2c *id)
* Check for the message size against FIFO depth and set the
* 'hold bus' bit if it is greater than FIFO depth.
*/
- if (id->recv_count > CDNS_I2C_FIFO_DEPTH)
+ if (id->recv_count > CDNS_I2C_FIFO_DEPTH || id->bus_hold_flag)
ctrl_reg |= CDNS_I2C_CR_HOLD;
+ else
+ ctrl_reg = ctrl_reg & ~CDNS_I2C_CR_HOLD;
cdns_i2c_writereg(ctrl_reg, CDNS_I2C_CR_OFFSET);
@@ -440,8 +442,11 @@ static void cdns_i2c_msend(struct cdns_i2c *id)
* Check for the message size against FIFO depth and set the
* 'hold bus' bit if it is greater than FIFO depth.
*/
- if (id->send_count > CDNS_I2C_FIFO_DEPTH)
+ if (id->recv_count > CDNS_I2C_FIFO_DEPTH || id->bus_hold_flag)
ctrl_reg |= CDNS_I2C_CR_HOLD;
+ else
+ ctrl_reg = ctrl_reg & ~CDNS_I2C_CR_HOLD;
+
cdns_i2c_writereg(ctrl_reg, CDNS_I2C_CR_OFFSET);
/* Clear the interrupts in interrupt status register. */
--
2.1.1
