> > > >>> + if (i2c_dev->has_dma) {
> > > >>> + ret = tegra_i2c_init_dma_param(i2c_dev, true);
> > > >>> + if (ret == -EPROBE_DEFER)
> > > >>> + goto disable_div_clk;
> > > >>> + ret = tegra_i2c_init_dma_param(i2c_dev, false);
> > > >>> + if (ret == -EPROBE_DEFER)
> > > >>> + goto disable_div_clk;
> > > >>
> > > >> So tegra_i2c_init_dma_param() could fail, printing a error
> > > >> message, and probe will succeed? If allocation fails during the
> > > >> driver's probe, then just fail the probe. Please give the
> > > >> rationale.
> > > >
> > > > If APB DMA probe doesn’t happen prior to tegra i2c, DMA is not
> > > > available by the time tegra_init_dma_param tries to request slave
> > > > channel and in those cases dma_request_slave_channel_reason will
> > > > return EPROBE_DEFER for tegra I2C probe to retry
> > > >
> > > > In case if DMA is available but DMA buffer allocation fails, then
> > > > tegra_i2c_init_dma_param returns ENOMEM and probe also fails
> > > > returning same ENOMEM
> > >
> > > Is that what you're going to change in the next version? Your
> > > current variant of the code doesn't fail the probe on ENOMEM and
> > > there is duplicated attempt to invoke tegra_i2c_init_dma_param()
> > > during the transfer.
> >
> > Sorry correction to my previous reply. If DMA buffer allocation
> > fails, tegra_i2c_init_dma_param returns ENOMEM but probe will succeed
> > as i2c transaction need to happen during boot for some platform
> > device programming for successful boot and they use PIO mode as xfer
> > bytes is less and deferring i2c probe for ENOMEM causes boot to fail
> > so during probe EPROBE_DEFER is only taken care.
> >
> > Re-attempt of tegra_i2c_init_dma_param in xfer happens only if no
> > successful DMA channel allocation happens prior to that ( during probe
> > in case of ENOMEM).
> > DMA mode is mainly for large transfer, and i2c xfer returning failure
> > due to failing DMA buffer allocation causes boot to hang as platform
> > device programming need to happen which doesn’t need to use DMA.
> > Will fix this and will send updated patch to reattempt DMA request and
> > buffer allocation during DMA mode transfer and will return fail for
> > DMA mode I2C transfer...
>
> I'm wondering if we shouldn't gracefully to PIO if we fail to allocate DMA buffers. Even if it is unlikely that large transfers (> than the threshold that activates the DMA paths) will be needed by critical I2C clients, there's really no reason why we can't do PIO if DMA > doesn't work for some reason.
>
> Thierry
Yes we can fall back to PIO mode incase of DMA buffer allocation failure. Will add this in next revised patch
Sowjanya
