Add MT8183 i2c binding to binding file. Compare to 2712 i2c
controller, MT8183 has different registers, offsets, clock,
and share i3c controller.
Signed-off-by: qii wang <qii.wang@xxxxxxxxxxxx>
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
---
Documentation/devicetree/bindings/i2c/i2c-mtk.txt | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mtk.txt b/Documentation/devicetree/bindings/i2c/i2c-mtk.txt
index ee4c324..0d29a5b 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mtk.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-mtk.txt
@@ -12,14 +12,15 @@ Required properties:
"mediatek,mt7623-i2c", "mediatek,mt6577-i2c": for MediaTek MT7623
"mediatek,mt7629-i2c", "mediatek,mt2712-i2c": for MediaTek MT7629
"mediatek,mt8173-i2c": for MediaTek MT8173
+ "mediatek,mt8183-i2c": for MediaTek MT8183
- reg: physical base address of the controller and dma base, length of memory
mapped region.
- interrupts: interrupt number to the cpu.
- clock-div: the fixed value for frequency divider of clock source in i2c
module. Each IC may be different.
- clocks: clock name from clock manager
- - clock-names: Must include "main" and "dma", if enable have-pmic need include
- "pmic" extra.
+ - clock-names: Must include "main" and "dma", "arb" is optional, if enable
+ have-pmic need include "pmic" extra.
Optional properties:
- clock-frequency: Frequency in Hz of the bus when transfer, the default value
@@ -27,6 +28,7 @@ Optional properties:
- mediatek,have-pmic: platform can control i2c form special pmic side.
Only mt6589 and mt8135 support this feature.
- mediatek,use-push-pull: IO config use push-pull mode.
+ - mediatek,share-i3c: i3c controller can share i2c function.
Example:
--
1.7.9.5
