[PATCH 09/10] i2c: s3c2410: use core helper to mark adapter suspended

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Rejecting transfers should be handled by the core. Also, this will
ensure proper locking which was forgotten in this open coded version.

Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
Tested-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
---
 drivers/i2c/busses/i2c-s3c2410.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 2f2e28d60ef5..53bc021f4a5a 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -104,7 +104,6 @@ enum s3c24xx_i2c_state {
 struct s3c24xx_i2c {
 	wait_queue_head_t	wait;
 	kernel_ulong_t		quirks;
-	unsigned int		suspended:1;
 
 	struct i2c_msg		*msg;
 	unsigned int		msg_num;
@@ -703,9 +702,6 @@ static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c,
 	unsigned long timeout;
 	int ret;
 
-	if (i2c->suspended)
-		return -EIO;
-
 	ret = s3c24xx_i2c_set_master(i2c);
 	if (ret != 0) {
 		dev_err(i2c->dev, "cannot get bus (error %d)\n", ret);
@@ -1246,7 +1242,7 @@ static int s3c24xx_i2c_suspend_noirq(struct device *dev)
 {
 	struct s3c24xx_i2c *i2c = dev_get_drvdata(dev);
 
-	i2c->suspended = 1;
+	i2c_mark_adapter_suspended(&i2c->adap);
 
 	if (!IS_ERR(i2c->sysreg))
 		regmap_read(i2c->sysreg, EXYNOS5_SYS_I2C_CFG, &i2c->sys_i2c_cfg);
@@ -1267,7 +1263,7 @@ static int s3c24xx_i2c_resume_noirq(struct device *dev)
 		return ret;
 	s3c24xx_i2c_init(i2c);
 	clk_disable(i2c->clk);
-	i2c->suspended = 0;
+	i2c_mark_adapter_resumed(&i2c->adap);
 
 	return 0;
 }
-- 
2.11.0




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux