Linux Kernel I2C

• Thread Index

• Re: [PATCH v2 8/9] i2c: i801: Improve register_dell_lis3lv02d_i2c_device
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 4/9] i2c: i801: Improve is_dell_system_with_lis3lv02d
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 2/9] i2c: i801: make p2sb_spinlock a mutex
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 1/9] i2c: i801: Improve disabling runtime pm
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH v5 1/3] i2c: aspeed: Add slave_enable() to toggle slave mode
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 8/9] i2c: i801: Improve register_dell_lis3lv02d_i2c_device
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH v2 4/9] i2c: i801: Improve is_dell_system_with_lis3lv02d
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH v2 2/9] i2c: i801: make p2sb_spinlock a mutex
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH v2 1/9] i2c: i801: Improve disabling runtime pm
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH v2 0/5] Correctly handle plaform_get_irq()'s result in the i2C drivers
  • From: Sergey Shtylyov <s.shtylyov@xxxxxx>
• Re: [PATCH v2 0/5] Correctly handle plaform_get_irq()'s result in the i2C drivers
  • From: Sergey Shtylyov <s.shtylyov@xxxxxx>
• Re: [PATCH/RFC 0/4] dt-bindings: i2c: renesas,riic: Add interrupt-names
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 9/9] i2c: i801: Improve handling platform data for tco device
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 8/9] i2c: i801: Improve register_dell_lis3lv02d_i2c_device
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 5/9] i2c: i801: Remove not needed check for PCI_COMMAND_INTX_DISABLE
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 4/9] i2c: i801: Improve is_dell_system_with_lis3lv02d
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 2/9] i2c: i801: make p2sb_spinlock a mutex
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 1/9] i2c: i801: Improve disabling runtime pm
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH/RFC 0/4] dt-bindings: i2c: renesas,riic: Add interrupt-names
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v1 2/2] i2c: dev: Use sysfs_emit() in "show" functions
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v1 1/2] i2c: dev: Define pr_fmt() and drop duplication substrings
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v3 3/3] i2c: designware: Fix indentation in the header
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v3 2/3] i2c: designware: Use DIV_ROUND_CLOSEST() macro
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v3 1/3] units: Add SI metric prefix definitions
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v3 1/3] units: Add SI metric prefix definitions
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH/RFC 0/4] dt-bindings: i2c: renesas,riic: Add interrupt-names
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: at91: mark PM ops as __maybe unused
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 1/7] i2c: at91-master: : use proper DMAENGINE API for termination
  • From: <Codrin.Ciubotariu@xxxxxxxxxxxxx>
• Re: [PATCH 0/7] i2c: use proper DMAENGINE API for termination
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 6/7] i2c: sh_mobile: : use proper DMAENGINE API for termination
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/7] i2c: qup: : use proper DMAENGINE API for termination
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/7] i2c: mxs: : use proper DMAENGINE API for termination
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/7] i2c: imx: : use proper DMAENGINE API for termination
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/7] i2c: at91-master: : use proper DMAENGINE API for termination
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: at91: mark PM ops as __maybe unused
  • From: <Codrin.Ciubotariu@xxxxxxxxxxxxx>
• [PATCH] i2c: at91: mark PM ops as __maybe unused
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v3 1/3] units: Add SI metric prefix definitions
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 3/8] i2c: mediatek: Reset the handshake signal between i2c and dma
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• Re: [PATCH v2] i2c: dev: zero out array used for i2c reads from userspace
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH V4 0/5] virtio: Add virtio-device bindings
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH] i2c: at91: remove #define CONFIG_PM
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 1/1] i2c: parport: Switch to use module_parport_driver()
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] Documentation: i2c: add i2c-sysfs into index
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2] i2c: dev: zero out array used for i2c reads from userspace
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 1/4] i2c: acpi: Add an i2c_acpi_client_count() helper function
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: iproc: fix race between client unreg and tasklet
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 3/9] i2c: i801: Remove not needed debug message
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 2/9] i2c: i801: make p2sb_spinlock a mutex
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 1/9] i2c: i801: Improve disabling runtime pm
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 09/10] i2c: i801: Improve register_dell_lis3lv02d_i2c_device
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH 09/10] i2c: i801: Improve register_dell_lis3lv02d_i2c_device
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH] i2c: iproc: fix race between client unreg and tasklet
  • From: Rayagonda Kokatanur <rayagonda.kokatanur@xxxxxxxxxxxx>
• Re: [PATCH v2 1/2] arm64: dts: ls1046a: fix eeprom entries
  • From: Shawn Guo <shawnguo@xxxxxxxxxx>
• Re: [PATCH v2 1/2] arm64: dts: ls1046a: fix eeprom entries
  • From: Li Yang <leoyang.li@xxxxxxx>
• [PATCH v2 9/9] i2c: i801: Improve handling platform data for tco device
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH v2 8/9] i2c: i801: Improve register_dell_lis3lv02d_i2c_device
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH v2 7/9] i2c: i801: Improve i801_add_mux
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH v2 6/9] i2c: i801: Improve i801_acpi_probe/remove functions
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH v2 5/9] i2c: i801: Remove not needed check for PCI_COMMAND_INTX_DISABLE
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH v2 4/9] i2c: i801: Improve is_dell_system_with_lis3lv02d
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH v2 3/9] i2c: i801: Remove not needed debug message
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH v2 2/9] i2c: i801: make p2sb_spinlock a mutex
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH v2 1/9] i2c: i801: Improve disabling runtime pm
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH v2 0/9] i2c: i801: Series with improvements
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH 09/10] i2c: i801: Improve register_dell_lis3lv02d_i2c_device
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH 01/10] i2c: i801: Don't call pm_runtime_allow
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH] i2c: iproc: fix race between client unreg and tasklet
  • From: Ray Jui <ray.jui@xxxxxxxxxxxx>
• Re: [PATCH 01/10] i2c: i801: Don't call pm_runtime_allow
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH 01/10] i2c: i801: Don't call pm_runtime_allow
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH 1/4] i2c: acpi: Add an i2c_acpi_client_count() helper function
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 05/10] i2c: i801: Improve is_dell_system_with_lis3lv02d
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH 05/10] i2c: i801: Improve is_dell_system_with_lis3lv02d
  • From: Pali Rohár <pali@xxxxxxxxxx>
• Re: [PATCH 05/10] i2c: i801: Improve is_dell_system_with_lis3lv02d
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH 06/10] i2c: i801: Remove not needed check for PCI_COMMAND_INTX_DISABLE
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH 05/10] i2c: i801: Improve is_dell_system_with_lis3lv02d
  • From: Pali Rohár <pali@xxxxxxxxxx>
• [PATCH] i2c: iproc: fix race between client unreg and tasklet
  • From: Dhananjay Phadke <dphadke@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 06/10] i2c: i801: Remove not needed check for PCI_COMMAND_INTX_DISABLE
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH 10/10] i2c: i801: Improve handling platform data for tco device
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH 05/10] i2c: i801: Improve is_dell_system_with_lis3lv02d
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH 05/10] i2c: i801: Improve is_dell_system_with_lis3lv02d
  • From: Pali Rohár <pali@xxxxxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: at24: add ON Semi CAT24C04 and CAT24C05
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH 10/10] i2c: i801: Improve handling platform data for tco device
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH 07/10] i2c: i801: Improve i801_acpi_probe/remove functions
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH 09/10] i2c: i801: Improve register_dell_lis3lv02d_i2c_device
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH 08/10] i2c: i801: Improve i801_add_mux
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH 07/10] i2c: i801: Improve i801_acpi_probe/remove functions
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH 03/10] i2c: i801: Make p2sb_spinlock a mutex
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH 06/10] i2c: i801: Remove not needed check for PCI_COMMAND_INTX_DISABLE
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH 05/10] i2c: i801: Improve is_dell_system_with_lis3lv02d
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH 04/10] i2c: i801: Remove not needed debug message
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH 03/10] i2c: i801: Make p2sb_spinlock a mutex
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH 02/10] i2c: i801: Improve disabling runtime pm
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH 01/10] i2c: i801: Don't call pm_runtime_allow
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH v2 2/2] dt-bindings: at24: add ON Semi CAT24C04 and CAT24C05
  • From: Raag Jadav <raagjadav@xxxxxxxxx>
• [PATCH v2 1/2] arm64: dts: ls1046a: fix eeprom entries
  • From: Raag Jadav <raagjadav@xxxxxxxxx>
• [PATCH v2 0/2] fix eeprom entries for ls1046afrwy and ls1046ardb
  • From: Raag Jadav <raagjadav@xxxxxxxxx>
• Re: [PATCH 01/10] i2c: i801: Don't call pm_runtime_allow
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH v2 2/2] i2c: mux: pca954x: Support multiple devices on a single reset line
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 2/2] i2c: mux: pca954x: Support multiple devices on a single reset line
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• Re: [PATCH 01/10] i2c: i801: Don't call pm_runtime_allow
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH 01/10] i2c: i801: Don't call pm_runtime_allow
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] i2c: mux: pca954x: Support multiple devices on a single reset line
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 2/2] i2c: mux: pca954x: Support multiple devices on a single reset line
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH V4 0/5] virtio: Add virtio-device bindings
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH] i2c: highlander: add IRQ check
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 1/4] i2c: acpi: Add an i2c_acpi_client_count() helper function
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH 0/4] i2c/pdx86: Add an i2c_acpi_client_count() helper function
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH 0/4] i2c/pdx86: Add an i2c_acpi_client_count() helper function
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 3/4] platform/x86: i2c-multi-instantiate: Use the new i2c_acpi_client_count() helper
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 4/4] platform/x86: intel_cht_int33fe: Use the new i2c_acpi_client_count() helper
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 2/4] platform/x86: dual_accel_detect: Use the new i2c_acpi_client_count() helper
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 1/4] i2c: acpi: Add an i2c_acpi_client_count() helper function
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH AUTOSEL 5.13 11/11] HID: ft260: fix device removal due to USB disconnect
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH v2 2/2] i2c: mux: pca954x: Support multiple devices on a single reset line
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 2/2] i2c: mux: pca954x: Support multiple devices on a single reset line
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] i2c: mux: pca954x: Support multiple devices on a single reset line
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH V4 2/5] dt-bindings: i2c: Add bindings for i2c-virtio
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 01/10] i2c: i801: Don't call pm_runtime_allow
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH 01/10] i2c: i801: Don't call pm_runtime_allow
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH i2c-tools] Makefile: drop KERNELVERSION
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH 10/10] i2c: i801: Improve handling platform data for tco device
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 08/10] i2c: i801: Improve i801_add_mux
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 09/10] i2c: i801: Improve register_dell_lis3lv02d_i2c_device
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 07/10] i2c: i801: Improve i801_acpi_probe/remove functions
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 06/10] i2c: i801: Remove not needed check for PCI_COMMAND_INTX_DISABLE
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 05/10] i2c: i801: Improve is_dell_system_with_lis3lv02d
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 04/10] i2c: i801: Remove not needed debug message
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 03/10] i2c: i801: Make p2sb_spinlock a mutex
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 02/10] i2c: i801: Improve disabling runtime pm
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 01/10] i2c: i801: Don't call pm_runtime_allow
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 00/10] i2c: i801: Series with improvements
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: I2C MV64XXX: Showing Allwinner debug LCR register in bus lock case
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx>
• [PATCH i2c-tools] Makefile: drop KERNELVERSION
  • From: Baruch Siach <baruch@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: dac: ti,dac5571: Add TI DAC081C081 support
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v2] i2c: dev: zero out array used for i2c reads from userspace
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] HID: ft260: fix device removal due to USB disconnect
  • From: Jiri Kosina <jikos@xxxxxxxxxx>
• [PATCH v2] HID: ft260: fix device removal due to USB disconnect
  • From: Michael Zaidman <michael.zaidman@xxxxxxxxx>
• [PATCH] i2c: dev: zero out array used for i2c reads from userspace
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• I2C MV64XXX: Showing Allwinner debug LCR register in bus lock case
  • From: Hermann Lauer <Hermann.Lauer@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 00/10] i2c: xiic: Add features, bug fixes.
  • From: Marek Vasut <marex@xxxxxxx>
• [PATCH] Documentation: i2c: add i2c-sysfs into index
  • From: Hu Haowen <src.res@xxxxxxxx>
• RE: [PATCH v2 00/10] i2c: xiic: Add features, bug fixes.
  • From: Raviteja Narayanam <rna@xxxxxxxxxx>
• Re: [PATCH v1] HID: ft260: fix device removal due to USB disconnect
  • From: Jiri Kosina <jikos@xxxxxxxxxx>
• Re: [PATCH v2] i2c: i801: Fix handling SMBHSTCNT_PEC_EN
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v15] i2c: virtio: add a virtio i2c frontend driver
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• [PATCH v2] i2c: i801: Fix handling SMBHSTCNT_PEC_EN
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH v2 2/2] i2c: mux: pca954x: Support multiple devices on a single reset line
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• [PATCH v2 0/2] i2c: mux: pca954x: Support multiple devices on a single reset line
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: i2c: i2c-mux-pca954x: Define the reset-shared-hogged gpio
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: mux: pca954x: Support multiple devices on a single reset line
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• Re: i2c-tools 4.3 has been released
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH 3/3] i2c: at91: add advanced digital filtering support for SAMA5D4
  • From: Codrin Ciubotariu <codrin.ciubotariu@xxxxxxxxxxxxx>
• [PATCH 2/3] i2c: at91: keep the controller disabled when it is not used
  • From: Codrin Ciubotariu <codrin.ciubotariu@xxxxxxxxxxxxx>
• [PATCH 1/3] i2c: at91: move i2c_recover_bus() outside of at91_do_twi_transfer()
  • From: Codrin Ciubotariu <codrin.ciubotariu@xxxxxxxxxxxxx>
• [PATCH 0/3] i2c: at91: Fixes and updates
  • From: Codrin Ciubotariu <codrin.ciubotariu@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: i801: Fix handling SMBHSTCNT_PEC_EN
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH V4 2/5] dt-bindings: i2c: Add bindings for i2c-virtio
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• [PATCH V4 0/5] virtio: Add virtio-device bindings
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v15] i2c: virtio: add a virtio i2c frontend driver
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• kernel 5.14, i801_smbus errors during early boot
  • From: Chris Murphy <lists@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v15] i2c: virtio: add a virtio i2c frontend driver
  • From: Jie Deng <jie.deng@xxxxxxxxx>
• Re: i2c-tools-4.3 - tarballs from kernel.org
  • From: Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH V3 2/5] dt-bindings: i2c: Add bindings for i2c-virtio
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH v2 00/10] i2c: xiic: Add features, bug fixes.
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH V3 2/5] dt-bindings: i2c: Add bindings for i2c-virtio
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v5 1/4] dt-bindings: pwm: rockchip: add description for rk3568
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• Re: [PATCH V3 2/5] dt-bindings: i2c: Add bindings for i2c-virtio
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• Re: [PATCH V3 2/5] dt-bindings: i2c: Add bindings for i2c-virtio
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• RE: [PATCH v2 00/10] i2c: xiic: Add features, bug fixes.
  • From: Raviteja Narayanam <rna@xxxxxxxxxx>
• [PATCH V3 2/5] dt-bindings: i2c: Add bindings for i2c-virtio
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• [PATCH V3 0/5] virtio: Add virtio-device bindings
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v15] i2c: virtio: add a virtio i2c frontend driver
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v1.1 2/2] iio: dac: dac5571: Fix chip id detection for OF devices
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PULL REQUEST] i2c for v5.14
  • From: pr-tracker-bot@xxxxxxxxxx
• Re: [PATCH v1.1 2/2] iio: dac: dac5571: Fix chip id detection for OF devices
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1.1 2/2] iio: dac: dac5571: Fix chip id detection for OF devices
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PULL REQUEST] i2c for v5.14
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• [PATCH v1.1 2/2] iio: dac: dac5571: Fix chip id detection for OF devices
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] iio: dac: dac5571: Fix chip id detection for OF devices
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 2/2] iio: dac: dac5571: Fix chip id detection for OF devices
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH 2/2] iio: dac: dac5571: Fix chip id detection for OF devices
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: iio: dac: ti,dac5571: Add TI DAC081C081 support
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH 0/2] iio: ti-dac5571: Add TI DAC081C081 support
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v15] i2c: virtio: add a virtio i2c frontend driver
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• i2c-tools-4.3 - tarballs from kernel.org
  • From: Chris Clayton <chris2553@xxxxxxxxxxxxxx>
• [PATCH v15] i2c: virtio: add a virtio i2c frontend driver
  • From: Jie Deng <jie.deng@xxxxxxxxx>
• Re: [PATCH v10] i2c: virtio: add a virtio i2c frontend driver
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v10] i2c: virtio: add a virtio i2c frontend driver
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v14] i2c: virtio: add a virtio i2c frontend driver
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v14] i2c: virtio: add a virtio i2c frontend driver
  • From: Jie Deng <jie.deng@xxxxxxxxx>
• Re: [PATCH] i2c: i801: Fix handling SMBHSTCNT_PEC_EN
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH v14] i2c: virtio: add a virtio i2c frontend driver
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v10] i2c: virtio: add a virtio i2c frontend driver
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH V2 2/5] dt-bindings: i2c: Add bindings for i2c-virtio
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• i2c-tools 4.3 has been released
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH V2 2/5] dt-bindings: i2c: Add bindings for i2c-virtio
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• [PATCH V2 0/5] virtio: Add virtio-device bindings
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v1 2/6] staging: atomisp: Replace open-coded i2c_acpi_find_client_by_adev()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 2/6] staging: atomisp: Replace open-coded i2c_acpi_find_client_by_adev()
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• Re: [PATCH v4 0/5] bus: Make remove callback return void
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: i801: Fix handling SMBHSTCNT_PEC_EN
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v14] i2c: virtio: add a virtio i2c frontend driver
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v14] i2c: virtio: add a virtio i2c frontend driver
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v14] i2c: virtio: add a virtio i2c frontend driver
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v4 5/8] dt-bindings: i2c: add attribute default-timing-adjust
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] i2c: i801: Fix handling SMBHSTCNT_PEC_EN
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v4 0/5] bus: Make remove callback return void
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: i801: Fix handling SMBHSTCNT_PEC_EN
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v2 1/1] i2c: parport: Switch to use module_parport_driver()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/1] i2c: parport: Switch to use module_parport_driver()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/1] i2c: parport: Switch to use module_parport_driver()
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v2 00/10] i2c: xiic: Add features, bug fixes.
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH v2] i2c: mpc: Poll for MCF
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [GIT PULL] at24: fixes for v5.14
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v4 5/5] bus: Make remove callback return void
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• [PATCH v1] HID: ft260: fix device removal due to USB disconnect
  • From: Michael Zaidman <michael.zaidman@xxxxxxxxx>
• RE: [PATCH v2 00/10] i2c: xiic: Add features, bug fixes.
  • From: Raviteja Narayanam <rna@xxxxxxxxxx>
• Re: [PATCH v2 00/10] i2c: xiic: Add features, bug fixes.
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH 0/7] Rework block read support among i2cget and i2cdump
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• RE: [PATCH v2 00/10] i2c: xiic: Add features, bug fixes.
  • From: Raviteja Narayanam <rna@xxxxxxxxxx>
• Re: [PATCH] i2c: i801: Fix handling SMBHSTCNT_PEC_EN
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [GIT PULL] at24: fixes for v5.14
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v4 8/8] i2c: mediatek: modify bus speed calculation formula
  • From: Kewei Xu <kewei.xu@xxxxxxxxxxxx>
• [PATCH v4 7/8] i2c: mediatek: Isolate speed setting via dts for special devices
  • From: Kewei Xu <kewei.xu@xxxxxxxxxxxx>
• [PATCH v4 5/8] dt-bindings: i2c: add attribute default-timing-adjust
  • From: Kewei Xu <kewei.xu@xxxxxxxxxxxx>
• [PATCH v4 6/8] i2c: mediatek: Add OFFSET_EXT_CONF setting back
  • From: Kewei Xu <kewei.xu@xxxxxxxxxxxx>
• [PATCH v4 3/8] i2c: mediatek: Reset the handshake signal between i2c and dma
  • From: Kewei Xu <kewei.xu@xxxxxxxxxxxx>
• [PATCH v4 4/8] i2c: mediatek: Dump i2c/dma register when a timeout occurs
  • From: Kewei Xu <kewei.xu@xxxxxxxxxxxx>
• [PATCH v4 2/8] dt-bindings: i2c: update bindings for MT8195 SoC
  • From: Kewei Xu <kewei.xu@xxxxxxxxxxxx>
• [PATCH v4 1/8] i2c: mediatek: fixing the incorrect register offset
  • From: Kewei Xu <kewei.xu@xxxxxxxxxxxx>
• [PATCH V4 0/8] Introduce an attribute to choose timing setting
  • From: Kewei Xu <kewei.xu@xxxxxxxxxxxx>
• Re: [PATCH 0/8] Due to changes in hardware design, add patch to
  • From: Kewei Xu <kewei.xu@xxxxxxxxxxxx>
• Re: [PATCH/RFC 4/4] dt-bindings: i2c: renesas,riic: Make interrupt-names required
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH/RFC 1/4] dt-bindings: i2c: renesas,riic: Add interrupt-names
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 00/10] i2c: xiic: Add features, bug fixes.
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH 8/8] i2c: mediatek: modify bus speed calculation formula
  • From: Kewei Xu <kewei.xu@xxxxxxxxxxxx>
• Re: [PATCH 3/8] i2c: mediatek: fixing the incorrect register offset
  • From: Kewei Xu <kewei.xu@xxxxxxxxxxxx>
• Re: [PATCH v5 0/3] Add SSIF BMC driver
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 3/3] bindings: ipmi: Add binding for SSIF BMC driver
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 0/3] Add SSIF BMC driver
  • From: Corey Minyard <minyard@xxxxxxx>
• [PATCH] i2c: piix4: Replace piix4_smbus driver's cd6h/cd7h port io accesses with mmio accesses
  • From: Terry Bowman <Terry.Bowman@xxxxxxx>
• [PATCH v2] i2c: mpc: Poll for MCF
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 3/3] bindings: ipmi: Add binding for SSIF BMC driver
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH RESEND] dt-bindings: i2c: brcm,iproc-i2c: convert to the json-schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 4/4] bus: Make remove callback return void
  • From: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
• Upcoming release of i2c-tools (will be 4.3)
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH 8/8] i2c: mediatek: modify bus speed calculation formula
  • From: Tzung-Bi Shih <tzungbi@xxxxxxxxxx>
• Re: [PATCH 2/8] i2c: mediatek: Dump i2c/dma register when a timeout occurs
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• Re: [PATCH 3/8] i2c: mediatek: fixing the incorrect register offset
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• Re: [PATCH 1/8] dt-bindings: i2c: update bindings for MT8195 SoC
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• Re: [PATCH 0/8] Due to changes in hardware design, add patch to
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• [PATCH 8/8] i2c: mediatek: modify bus speed calculation formula
  • From: Kewei Xu <kewei.xu@xxxxxxxxxxxx>
• [PATCH 6/8] dt-bindings: i2c: add attribute default-timing-adjust
  • From: Kewei Xu <kewei.xu@xxxxxxxxxxxx>
• [PATCH 7/8] i2c: mediatek: Isolate speed setting via dts for special devices
  • From: Kewei Xu <kewei.xu@xxxxxxxxxxxx>
• [PATCH 5/8] i2c: mediatek: Add OFFSET_EXT_CONF setting back
  • From: Kewei Xu <kewei.xu@xxxxxxxxxxxx>
• [PATCH 4/8] i2c: mediatek: Reset the handshake signal between i2c and dma
  • From: Kewei Xu <kewei.xu@xxxxxxxxxxxx>
• [PATCH 3/8] i2c: mediatek: fixing the incorrect register offset
  • From: Kewei Xu <kewei.xu@xxxxxxxxxxxx>
• [PATCH 2/8] i2c: mediatek: Dump i2c/dma register when a timeout occurs
  • From: Kewei Xu <kewei.xu@xxxxxxxxxxxx>
• [PATCH 1/8] dt-bindings: i2c: update bindings for MT8195 SoC
  • From: Kewei Xu <kewei.xu@xxxxxxxxxxxx>
• [PATCH 0/8] Due to changes in hardware design, add patch to
  • From: Kewei Xu <kewei.xu@xxxxxxxxxxxx>
• RE: [PATCH/RFC 3/4] arm64: dts: renesas: r9a07g044: Add I2C interrupt-names
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH/RFC 4/4] dt-bindings: i2c: renesas,riic: Make interrupt-names required
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH/RFC 0/4] dt-bindings: i2c: renesas,riic: Add interrupt-names
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH/RFC 2/4] ARM: dts: rza: Add I2C interrupt-names
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH/RFC 3/4] arm64: dts: renesas: r9a07g044: Add I2C interrupt-names
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH/RFC 1/4] dt-bindings: i2c: renesas,riic: Add interrupt-names
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• Re: [PATCH v4 5/5] bus: Make remove callback return void
  • From: Sudeep Holla <sudeep.holla@xxxxxxx>
• Re: [PATCH v4 5/5] bus: Make remove callback return void
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v14] i2c: virtio: add a virtio i2c frontend driver
  • From: Jie Deng <jie.deng@xxxxxxxxx>
• [PATCH v5 3/3] bindings: ipmi: Add binding for SSIF BMC driver
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v5 2/3] ipmi: ssif_bmc: Add SSIF BMC driver
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v5 1/3] i2c: aspeed: Add slave_enable() to toggle slave mode
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v5 0/3] Add SSIF BMC driver
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v14] i2c: virtio: add a virtio i2c frontend driver
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v4 0/3] Add SSIF BMC driver
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 0/3] Add SSIF BMC driver
  • From: Corey Minyard <minyard@xxxxxxx>
• Re: [PATCH v4 0/3] Add SSIF BMC driver
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [RESEND PATCH v5 1/4] dt-bindings: pwm: rockchip: add description for rk3568
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [RESEND PATCH v5 1/4] dt-bindings: pwm: rockchip: add description for rk3568
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v4 5/5] bus: Make remove callback return void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v4 0/5] bus: Make remove callback return void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v4 0/3] Add SSIF BMC driver
  • From: Corey Minyard <minyard@xxxxxxx>
• Re: [PATCH v14] i2c: virtio: add a virtio i2c frontend driver
  • From: "Michael S. Tsirkin" <mst@xxxxxxxxxx>
• Re: [PATCH v14] i2c: virtio: add a virtio i2c frontend driver
  • From: "Michael S. Tsirkin" <mst@xxxxxxxxxx>
• Re: [PATCH 3/5] dt-bindings: i2c: Add bindings for i2c-virtio
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 4/5] i2c: virtio: Update i2c-adapter's of_node
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• [PATCH 3/5] dt-bindings: i2c: Add bindings for i2c-virtio
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• [PATCH 0/5] virtio: Parse virtio-device nodes from DT
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• [PATCH RESEND] dt-bindings: i2c: brcm,iproc-i2c: convert to the json-schema
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• Re: [PATCH 1/7] i2c: at91-master: : use proper DMAENGINE API for termination
  • From: <Codrin.Ciubotariu@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: at91: remove #define CONFIG_PM
  • From: <Codrin.Ciubotariu@xxxxxxxxxxxxx>
• Re: [PATCH 0/7] Rework block read support among i2cget and i2cdump
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH v3 5/5] bus: Make remove callback return void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v3 0/5] bus: Make remove callback return void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: cadence: Implement save restore
  • From: Michal Simek <michal.simek@xxxxxxxxxx>
• [PATCH] i2c: cadence: Implement save restore
  • From: Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxxxxx>
• [PATCH v4 3/3] i2c: aspeed: Add slave_enable() to toggle slave mode
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v4 2/3] bindings: ipmi: Add binding for SSIF BMC driver
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v4 1/3] ipmi: ssif_bmc: Add SSIF BMC driver
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v4 0/3] Add SSIF BMC driver
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v1 2/2] i2c: dev: Use sysfs_emit() in "show" functions
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 1/2] i2c: dev: Define pr_fmt() and drop duplication substrings
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v3 3/3] i2c: designware: Fix indentation in the header
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v3 2/3] i2c: designware: Use DIV_ROUND_CLOSEST() macro
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v3 1/3] units: Add SI metric prefix definitions
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] units: Add SI metric prefix definitions
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 1/1] i2c: parport: Switch to use module_parport_driver()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 3/7] PCI: New Primary to Sideband (P2SB) bridge support library
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 3/7] PCI: New Primary to Sideband (P2SB) bridge support library
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 3/7] PCI: New Primary to Sideband (P2SB) bridge support library
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 0/7] Rework block read support among i2cget and i2cdump
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH 1/7] i2cget: Add support for I2C block data
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH] i2c: mpc: Poll for MCF
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• Re: [RESEND PATCH v5 1/4] dt-bindings: pwm: rockchip: add description for rk3568
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• [PATCH AUTOSEL 4.9 25/26] i2c: core: Disable client irq on reboot/shutdown
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 32/33] i2c: core: Disable client irq on reboot/shutdown
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 38/39] i2c: core: Disable client irq on reboot/shutdown
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 62/63] i2c: core: Disable client irq on reboot/shutdown
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 90/93] i2c: core: Disable client irq on reboot/shutdown
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.12 101/104] i2c: core: Disable client irq on reboot/shutdown
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH v14] i2c: virtio: add a virtio i2c frontend driver
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• [PATCH v14] i2c: virtio: add a virtio i2c frontend driver
  • From: Jie Deng <jie.deng@xxxxxxxxx>
• [PATCH 07/13] mailbox: pcc: Use PCC mailbox channel pointer instead of standard
  • From: Sudeep Holla <sudeep.holla@xxxxxxx>
• Re: [PATCH v2 4/4] bus: Make remove callback return void
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH v2 0/4] bus: Make remove callback return void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v2 0/4] bus: Make remove callback return void
  • From: Sven Van Asbroeck <thesven73@xxxxxxxxx>
• Re: [PATCH] i2c: mpc: Restore reread of I2C status register
  • From: Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 4/4] bus: Make remove callback return void
  • From: Thorsten Scherer <t.scherer@xxxxxxxxxxxx>
• Re: [PATCH v2 4/4] bus: Make remove callback return void
  • From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
• Re: [PATCH v2 4/4] bus: Make remove callback return void
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH v2 4/4] bus: Make remove callback return void
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v2 4/4] bus: Make remove callback return void
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• Re: [PATCH v2 4/4] bus: Make remove callback return void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v2 4/4] bus: Make remove callback return void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v2 4/4] bus: Make remove callback return void
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 4/4] bus: Make remove callback return void
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v2 4/4] bus: Make remove callback return void
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH v2 4/4] bus: Make remove callback return void
  • From: Cornelia Huck <cohuck@xxxxxxxxxx>
• [PATCH v2 0/4] bus: Make remove callback return void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v2 4/4] bus: Make remove callback return void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH] bus: Make remove callback return void
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• Re: [PATCH] bus: Make remove callback return void
  • From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
• Re: [PATCH] bus: Make remove callback return void
  • From: Yehezkel Bernat <yehezkelshb@xxxxxxxxx>
• Re: [PATCH] bus: Make remove callback return void
  • From: Geoff Levand <geoff@xxxxxxxxxxxxx>
• Re: [PATCH] bus: Make remove callback return void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH] bus: Make remove callback return void
  • From: Maximilian Luz <luzmaximilian@xxxxxxxxx>
• Re: [PATCH] bus: Make remove callback return void
  • From: Cornelia Huck <cohuck@xxxxxxxxxx>
• Re: [PATCH] bus: Make remove callback return void
  • From: Kirti Wankhede <kwankhede@xxxxxxxxxx>
• Re: [PATCH] bus: Make remove callback return void
  • From: Cornelia Huck <cohuck@xxxxxxxxxx>
• [PATCH] bus: Make remove callback return void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH] bus: Make remove callback return void
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] bus: Make remove callback return void
  • From: Johannes Thumshirn <Johannes.Thumshirn@xxxxxxx>
• Re: [PATCH] bus: Make remove callback return void
  • From: Juergen Gross <jgross@xxxxxxxx>
• Re: [PATCH] bus: Make remove callback return void
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH] bus: Make remove callback return void
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH] bus: Make remove callback return void
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH] bus: Make remove callback return void
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
• Re: [PATCH] bus: Make remove callback return void
  • From: Pali Rohár <pali@xxxxxxxxxx>
• Re: [PATCH] bus: Make remove callback return void
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• Re: [PATCH] bus: Make remove callback return void
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] bus: Make remove callback return void
  • From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH v10] i2c: virtio: add a virtio i2c frontend driver
  • From: Jie Deng <jie.deng@xxxxxxxxx>
• Re: [PATCH v2 2/3] i2c: pca-platform: fix deferred probing
  • From: Sergey Shtylyov <s.shtylyov@xxxxxx>
• Re: [PATCH] misc: eeprom: at24: Always append device id even if label property is set.
  • From: Alexander Fomichev <fomichev.ru@xxxxxxxxx>
• Re: [PATCH v10] i2c: virtio: add a virtio i2c frontend driver
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• [PATCH] i2c: at91: remove #define CONFIG_PM
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
• Re: [PATCH v13] i2c: virtio: add a virtio i2c frontend driver
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v13] i2c: virtio: add a virtio i2c frontend driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [GIT PULL] at24: fixes for v5.14
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v13] i2c: virtio: add a virtio i2c frontend driver
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v13] i2c: virtio: add a virtio i2c frontend driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v13] i2c: virtio: add a virtio i2c frontend driver
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v2 4/5] i2c: s3c2410: fix IRQ check
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [RESEND PATCH v5 1/4] dt-bindings: pwm: rockchip: add description for rk3568
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [RESEND PATCH v5 1/4] dt-bindings: pwm: rockchip: add description for rk3568
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v12] i2c: virtio: add a virtio i2c frontend driver
  • From: Jie Deng <jie.deng@xxxxxxxxx>
• [PATCH v13] i2c: virtio: add a virtio i2c frontend driver
  • From: Jie Deng <jie.deng@xxxxxxxxx>
• Re: [RESEND PATCH v5 1/4] dt-bindings: pwm: rockchip: add description for rk3568
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v12] i2c: virtio: add a virtio i2c frontend driver
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v12] i2c: virtio: add a virtio i2c frontend driver
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v12] i2c: virtio: add a virtio i2c frontend driver
  • From: Jie Deng <jie.deng@xxxxxxxxx>
• Re: [PATCH v12] i2c: virtio: add a virtio i2c frontend driver
  • From: Jie Deng <jie.deng@xxxxxxxxx>
• Re: [PATCH v12] i2c: virtio: add a virtio i2c frontend driver
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v12] i2c: virtio: add a virtio i2c frontend driver
  • From: Jie Deng <jie.deng@xxxxxxxxx>
• Re: [PATCH v12] i2c: virtio: add a virtio i2c frontend driver
  • From: Jie Deng <jie.deng@xxxxxxxxx>
• Re: [PATCH v12] i2c: virtio: add a virtio i2c frontend driver
  • From: Jie Deng <jie.deng@xxxxxxxxx>
• Re: [PATCH v12] i2c: virtio: add a virtio i2c frontend driver
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v12] i2c: virtio: add a virtio i2c frontend driver
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PULL REQUEST] i2c for v5.14
  • From: pr-tracker-bot@xxxxxxxxxx
• [PATCH v2 5/5] i2c: xlp9xx: fix main IRQ check
  • From: Sergey Shtylyov <s.shtylyov@xxxxxx>
• [PATCH v2 4/5] i2c: s3c2410: fix IRQ check
  • From: Sergey Shtylyov <s.shtylyov@xxxxxx>
• [PATCH v2 3/5] i2c: pmcmsp: fix IRQ check
  • From: Sergey Shtylyov <s.shtylyov@xxxxxx>
• [PATCH v2 2/5] i2c: mt65xx: fix IRQ check
  • From: Sergey Shtylyov <s.shtylyov@xxxxxx>
• [PATCH v2 1/5] i2c: hix5hd2: fix IRQ check
  • From: Sergey Shtylyov <s.shtylyov@xxxxxx>
• [PATCH v2 0/5] Correctly handle plaform_get_irq()'s result in the i2C drivers
  • From: Sergey Shtylyov <s.shtylyov@xxxxxx>
• Re: Unavailable for two weeks
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: Unavailable for two weeks
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Unavailable for two weeks
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• [PULL REQUEST] i2c for v5.14
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v12] i2c: virtio: add a virtio i2c frontend driver
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v12] i2c: virtio: add a virtio i2c frontend driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v12] i2c: virtio: add a virtio i2c frontend driver
  • From: Jie Deng <jie.deng@xxxxxxxxx>
• Re: [PATCH] i2c: ali1535: mention that the device should not be disabled
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: mpc: Restore reread of I2C status register
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v11] i2c: virtio: add a virtio i2c frontend driver
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v11] i2c: virtio: add a virtio i2c frontend driver
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v11] i2c: virtio: add a virtio i2c frontend driver
  • From: Jie Deng <jie.deng@xxxxxxxxx>
• Re: [PATCH v11] i2c: virtio: add a virtio i2c frontend driver
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v11] i2c: virtio: add a virtio i2c frontend driver
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v11] i2c: virtio: add a virtio i2c frontend driver
  • From: Jie Deng <jie.deng@xxxxxxxxx>
• Re: [kbuild-all] Re: [PATCH v11] i2c: virtio: add a virtio i2c frontend driver
  • From: Rong Chen <rong.a.chen@xxxxxxxxx>
• Re: [PATCH v11] i2c: virtio: add a virtio i2c frontend driver
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v11] i2c: virtio: add a virtio i2c frontend driver
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v11] i2c: virtio: add a virtio i2c frontend driver
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v11] i2c: virtio: add a virtio i2c frontend driver
  • From: Jie Deng <jie.deng@xxxxxxxxx>
• [PATCH] i2c: mpc: Restore reread of I2C status register
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v11] i2c: virtio: add a virtio i2c frontend driver
  • From: Jie Deng <jie.deng@xxxxxxxxx>
• Re: [PATCH v11] i2c: virtio: add a virtio i2c frontend driver
  • From: Jie Deng <jie.deng@xxxxxxxxx>
• Re: [PATCH v11] i2c: virtio: add a virtio i2c frontend driver
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] misc: eeprom: at24: Always append device id even if label property is set.
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH] misc: eeprom: at24: Always append device id even if label property is set.
  • From: jglisse@xxxxxxxxxx
• Re: [PATCH] i2c: ali1535: mention that the device should not be disabled
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v11] i2c: virtio: add a virtio i2c frontend driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v11] i2c: virtio: add a virtio i2c frontend driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 0/3] i2c: stm32f7: several fixes in error cases
  • From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
• Re: [PATCH v11] i2c: virtio: add a virtio i2c frontend driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v11] i2c: virtio: add a virtio i2c frontend driver
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v11] i2c: virtio: add a virtio i2c frontend driver
  • From: Jie Deng <jie.deng@xxxxxxxxx>
• Re: [PATCH v11] i2c: virtio: add a virtio i2c frontend driver
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• [PATCH v11] i2c: virtio: add a virtio i2c frontend driver
  • From: Jie Deng <jie.deng@xxxxxxxxx>
• Re: [PATCH] i2c: cadence: Add standard bus recovery support
  • From: Robert Hancock <robert.hancock@xxxxxxxxxx>
• Re: [PATCH v10] i2c: virtio: add a virtio i2c frontend driver
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v10] i2c: virtio: add a virtio i2c frontend driver
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• [PATCH 3/3] i2c: stm32f7: prevent calling slave handling if no slave running
  • From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
• [PATCH 1/3] i2c: stm32f7: recover the bus on access timeout
  • From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
• [PATCH 2/3] i2c: stm32f7: flush TX FIFO upon transfer errors
  • From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
• [PATCH 0/3] i2c: stm32f7: several fixes in error cases
  • From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
• Re: [PATCH 7/7] i2c: stm32f7: : use proper DMAENGINE API for termination
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 7/7] i2c: stm32f7: : use proper DMAENGINE API for termination
  • From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
• Re: [PATCH v10] i2c: virtio: add a virtio i2c frontend driver
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v10] i2c: virtio: add a virtio i2c frontend driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v10] i2c: virtio: add a virtio i2c frontend driver
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v10] i2c: virtio: add a virtio i2c frontend driver
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v10] i2c: virtio: add a virtio i2c frontend driver
  • From: Jie Deng <jie.deng@xxxxxxxxx>
• Re: [PATCH v10] i2c: virtio: add a virtio i2c frontend driver
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v10] i2c: virtio: add a virtio i2c frontend driver
  • From: Jie Deng <jie.deng@xxxxxxxxx>
• Re: [PATCH 2/3] i2c: mediatek: Dump i2c/dma register when a timeout occurs
  • From: Kewei Xu <kewei.xu@xxxxxxxxxxxx>
• Re: [PATCH v10] i2c: virtio: add a virtio i2c frontend driver
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v10] i2c: virtio: add a virtio i2c frontend driver
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v10] i2c: virtio: add a virtio i2c frontend driver
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v10] i2c: virtio: add a virtio i2c frontend driver
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v10] i2c: virtio: add a virtio i2c frontend driver
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v10] i2c: virtio: add a virtio i2c frontend driver
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v10] i2c: virtio: add a virtio i2c frontend driver
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v10] i2c: virtio: add a virtio i2c frontend driver
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v10] i2c: virtio: add a virtio i2c frontend driver
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v10] i2c: virtio: add a virtio i2c frontend driver
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v10] i2c: virtio: add a virtio i2c frontend driver
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v10] i2c: virtio: add a virtio i2c frontend driver
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v10] i2c: virtio: add a virtio i2c frontend driver
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v10] i2c: virtio: add a virtio i2c frontend driver
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v10] i2c: virtio: add a virtio i2c frontend driver
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v10] i2c: virtio: add a virtio i2c frontend driver
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• [kbuild] Re: [PATCH 3/5] i2c: pmcmsp: fix-IRQ-check
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH 2/3] i2c: mediatek: Dump i2c/dma register when a timeout occurs
  • From: Tzung-Bi Shih <tzungbi@xxxxxxxxxx>
• Re: [PATCH v10] i2c: virtio: add a virtio i2c frontend driver
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v3 2/5] soc: qcom: geni: Add support for gpi dma
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v10] i2c: virtio: add a virtio i2c frontend driver
  • From: Jie Deng <jie.deng@xxxxxxxxx>
• Re: [PATCH v10] i2c: virtio: add a virtio i2c frontend driver
  • From: Jie Deng <jie.deng@xxxxxxxxx>
• Re: [PATCH v3 2/5] soc: qcom: geni: Add support for gpi dma
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v3 1/5] soc: qcom: geni: move GENI_IF_DISABLE_RO to common header
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v3 4/5] spi: spi-geni-qcom: Add support for GPI dma
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: Device match data and DT compatible string fallback
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: Device match data and DT compatible string fallback
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Device match data and DT compatible string fallback
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v10] i2c: virtio: add a virtio i2c frontend driver
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v10] i2c: virtio: add a virtio i2c frontend driver
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v10] i2c: virtio: add a virtio i2c frontend driver
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v10] i2c: virtio: add a virtio i2c frontend driver
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v10] i2c: virtio: add a virtio i2c frontend driver
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v10] i2c: virtio: add a virtio i2c frontend driver
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v10] i2c: virtio: add a virtio i2c frontend driver
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 00/10] i2c: xiic: Add features, bug fixes.
  • From: Michal Simek <michal.simek@xxxxxxxxxx>
• Re: [PATCH 0/7] Rework block read support among i2cget and i2cdump
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 1/7] i2cget: Add support for I2C block data
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 0/7] Rework block read support among i2cget and i2cdump
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: slave-eeprom: add an of_match_table
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• [PATCH v2 10/10] i2c: xiic: Add smbus_block_read functionality
  • From: Raviteja Narayanam <raviteja.narayanam@xxxxxxxxxx>
• [PATCH v2 09/10] i2c: xiic: Fix coding style issues
  • From: Raviteja Narayanam <raviteja.narayanam@xxxxxxxxxx>
• [PATCH v2 08/10] i2c: xiic: Fix the type check for xiic_wakeup
  • From: Raviteja Narayanam <raviteja.narayanam@xxxxxxxxxx>
• [PATCH v2 07/10] i2c: xiic: Return value of xiic_reinit
  • From: Raviteja Narayanam <raviteja.narayanam@xxxxxxxxxx>
• [PATCH v2 06/10] i2c: xiic: Update compatible with new IP version
  • From: Raviteja Narayanam <raviteja.narayanam@xxxxxxxxxx>
• [PATCH v2 05/10] dt-bindings: i2c: xiic: Add 'xlnx,axi-iic-2.1' to compatible
  • From: Raviteja Narayanam <raviteja.narayanam@xxxxxxxxxx>
• [PATCH v2 04/10] i2c: xiic: Remove interrupt enable/disable in Rx path
  • From: Raviteja Narayanam <raviteja.narayanam@xxxxxxxxxx>
• [PATCH v2 03/10] i2c: xiic: Switch to Xiic standard mode for i2c-read
  • From: Raviteja Narayanam <raviteja.narayanam@xxxxxxxxxx>
• [PATCH v2 02/10] i2c: xiic: Add standard mode support for > 255 byte read transfers
  • From: Raviteja Narayanam <raviteja.narayanam@xxxxxxxxxx>
• [PATCH v2 01/10] i2c: xiic: Fix Tx Interrupt path for grouped messages
  • From: Raviteja Narayanam <raviteja.narayanam@xxxxxxxxxx>
• [PATCH v2 00/10] i2c: xiic: Add features, bug fixes.
  • From: Raviteja Narayanam <raviteja.narayanam@xxxxxxxxxx>
• Re: [PATCH] drivers: i2c: i2c-core-smbus.c: Fix alignment of comment
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• [PATCH v3] i2c: i801: Safely share SMBus with BIOS/ACPI
  • From: Hector Martin <marcan@xxxxxxxxx>
• Re: [PULL REQUEST] i2c for v5.13
  • From: pr-tracker-bot@xxxxxxxxxx
• [PULL REQUEST] i2c for v5.13
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• [PATCH] i2c: ali1535: mention that the device should not be disabled
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: core: export i2c_smbus_pec()
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v3 1/7] i2c: i2c-core-smbus: Expose PEC calculate function for generic use
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v1 1/2] dt-bindings: i2c: microchip: Add Microchip PolarFire host binding
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v1 2/2] i2c: microchip: Add driver for Microchip PolarFire SoC
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 1/3] i2c: Add parameters to sysfs-added i2c devices
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2] Documentation: i2c: Add doc for I2C sysfs
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: (subset) [PATCH v3 0/5] Add and enable GPI DMA users
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] i2c: robotfuzz-osif: fix control-request directions
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v3 4/5] spi: spi-geni-qcom: Add support for GPI dma
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 2/7] i2c: imx: : use proper DMAENGINE API for termination
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH v2 4/4] dt-bindings: gpio: pcf857x: Convert to json-schema
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• [PATCH v3 5/5] i2c: qcom-geni: Add support for GPI DMA
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH v3 4/5] spi: spi-geni-qcom: Add support for GPI dma
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH v3 3/5] spi: core: add dma_map_dev for dma device
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH v3 2/5] soc: qcom: geni: Add support for gpi dma
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH v3 1/5] soc: qcom: geni: move GENI_IF_DISABLE_RO to common header
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH v3 0/5] Add and enable GPI DMA users
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: i2c-new: Add bindings for AST2600 I2C
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] i2c: robotfuzz-osif: fix control-request directions
  • From: Andrew Lunn <andrew@xxxxxxx>
• [PATCH v2 3/3] i2c: synquacer: fix deferred probing
  • From: Sergey Shtylyov <s.shtylyov@xxxxxx>
• [PATCH v2 2/3] i2c: pca-platform: fix deferred probing
  • From: Sergey Shtylyov <s.shtylyov@xxxxxx>
• [PATCH v2 1/3] i2c: iop3xx: fix deferred probing
  • From: Sergey Shtylyov <s.shtylyov@xxxxxx>
• [PATCH v2 0/3] Fix deferred probing in the I2C bus drivers
  • From: Sergey Shtylyov <s.shtylyov@xxxxxx>
• Re: [PATCH] i2c: robotfuzz-osif: fix control-request directions
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2] i2c: core: Disable client irq on reboot/shutdown
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c/imx: Fix some checkpatch warnings
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: i2c-dev: Add __user annotation
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v1 1/1] i2c: parport: Switch to use module_parport_driver()
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH] i2c: i2c-dev: Add __user annotation
  • From: Andreas Hecht <andreas.e.hecht@xxxxxxxxx>
• [PATCH 5/5] i2c: xlp9xx: fix main IRQ check
  • From: Sergey Shtylyov <s.shtylyov@xxxxxx>
• [PATCH 4/5] i2c: s3c2410: fix IRQ check
  • From: Sergey Shtylyov <s.shtylyov@xxxxxx>
• [PATCH 3/5] i2c: pmcmsp: fix-IRQ-check
  • From: Sergey Shtylyov <s.shtylyov@xxxxxx>
• [PATCH 2/5] i2c: mt65xx: fix IRQ check
  • From: Sergey Shtylyov <s.shtylyov@xxxxxx>
• [PATCH 1/5] i2c: hix5hd2: fix IRQ check
  • From: Sergey Shtylyov <s.shtylyov@xxxxxx>
• [PATCH 0/5] Correctly handle plaform_get_irq()'s result in the i2C drivers
  • From: Sergey Shtylyov <s.shtylyov@xxxxxx>
• Re: [PATCH 2/9] i2c: xiic: Simplify with dev_err_probe()
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 5/9] i2c: davinci: Simplify with dev_err_probe()
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 4/9] i2c: cadence: Simplify with dev_err_probe()
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: cadence: Clear HOLD bit before xfer_size register rolls over
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 5/7] i2c: rcar: : use proper DMAENGINE API for termination
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 7/7] i2c: stm32f7: : use proper DMAENGINE API for termination
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 5/7] i2c: rcar: : use proper DMAENGINE API for termination
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c/imx: Fix some checkpatch warnings
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 7/7] i2c: stm32f7: : use proper DMAENGINE API for termination
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 6/7] i2c: sh_mobile: : use proper DMAENGINE API for termination
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 4/7] i2c: qup: : use proper DMAENGINE API for termination
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 5/7] i2c: rcar: : use proper DMAENGINE API for termination
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 3/7] i2c: mxs: : use proper DMAENGINE API for termination
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 2/7] i2c: imx: : use proper DMAENGINE API for termination
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 1/7] i2c: at91-master: : use proper DMAENGINE API for termination
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 0/7] i2c: use proper DMAENGINE API for termination
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/9] i2c: cadence: Simplify with dev_err_probe()
  • From: Michal Simek <monstr@xxxxxxxxx>
• Re: [PATCH 2/9] i2c: xiic: Simplify with dev_err_probe()
  • From: Michal Simek <monstr@xxxxxxxxx>
• Re: [PATCH] i2c: robotfuzz-osif: fix control-request directions
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] i2c: cadence: Clear HOLD bit before xfer_size register rolls over
  • From: Michal Simek <monstr@xxxxxxxxx>
• [PATCH] i2c/imx: Fix some checkpatch warnings
  • From: Kwon Tae-young <tykwon@xxxxxxxxx>
• [RESEND PATCH v5 1/4] dt-bindings: pwm: rockchip: add description for rk3568
  • From: <cl@xxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: Drop redundant minItems/maxItems
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v5 1/4] dt-bindings: pwm: rockchip: add description for rk3568
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• Re: [PATCH v5 3/4] arm64: dts: rockchip: add core dtsi for RK3568 SoC
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• Re: [PATCH v5 3/4] arm64: dts: rockchip: add core dtsi for RK3568 SoC
  • From: Johan Jonker <jbx6244@xxxxxxxxx>
• Re: (subset) [PATCH v5 0/4] arm64: dts: rockchip: add basic dtsi/dts files for RK3568 SoC
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• Re: [PATCH] dt-bindings: Drop redundant minItems/maxItems
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH v5 4/4] arm64: dts: rockchip: add basic dts for RK3568 EVB
  • From: <cl@xxxxxxxxxxxxxx>
• [PATCH v5 2/4] arm64: dts: rockchip: add generic pinconfig settings used by most Rockchip socs
  • From: <cl@xxxxxxxxxxxxxx>
• [PATCH v5 0/4] arm64: dts: rockchip: add basic dtsi/dts files for RK3568 SoC
  • From: <cl@xxxxxxxxxxxxxx>
• [PATCH v5 3/4] arm64: dts: rockchip: add core dtsi for RK3568 SoC
  • From: <cl@xxxxxxxxxxxxxx>
• [PATCH v5 1/4] dt-bindings: pwm: rockchip: add description for rk3568
  • From: <cl@xxxxxxxxxxxxxx>
• [PATCH] i2c: i801: Fix handling SMBHSTCNT_PEC_EN
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH v1 1/1] i2c: parport: Switch to use module_parport_driver()
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2] i2c: core: Disable client irq on reboot/shutdown
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH 3/3] i2c:support new register set for ast2600
  • From: Jamin Lin <jamin_lin@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3] i2c:support new register set for ast2600
  • From: Jamin Lin <jamin_lin@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: mediatek: Isolate speed setting via dts for special devices
  • From: Tzung-Bi Shih <tzungbi@xxxxxxxxxx>
• Re: [PATCH] i2c: cp2615: check for allocation failure in cp2615_i2c_recv()
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: i2c: ce4100: Replace "ti,pcf8575" by "nxp,pcf8575"
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2] i2c: core: Disable client irq on reboot/shutdown
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2] i2c: i801: Ensure that SMBHSTSTS_INUSE_STS is cleared when leaving i801_access
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: i801: Improve i801_setup_hstcfg
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: i801: Use driver name constant instead of function dev_driver_string
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: i801: Simplify initialization of i2c_board_info in i801_probe_optional_slaves
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: i801: Improve status polling
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 1/1] i2c: cht-wc: Replace of_node by NULL
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: qcom-cci: add sm8250 compatible
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: qcom-cci: add sm8250 compatible
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 5/5] dt-bindings: i2c: renesas,iic: Convert to json-schema
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/5] dt-bindings: i2c: renesas,iic: Always declare generic compatibility
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] i2c: riic: Add RZ/G2L support
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: i2c: renesas,riic: Document RZ/G2L I2C controller
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 12/16] i2c: busses: i2c-rk3x: Demote unworthy headers and help more complete ones
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• [PATCH] i2c: mediatek: Isolate speed setting via dts for special devices
  • From: <kewei.xu@xxxxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: i2c: update bindings for MT8195 SoC
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 0/5] renesas,iic: Fixes and DT binding to json-schema conversion
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 5/5] dt-bindings: i2c: renesas,iic: Convert to json-schema
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH v2 2/5] ARM: dts: rzg1: Add generic compatible strings to IIC nodes
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH v2 3/5] arm64: dts: renesas: r8a774c0: Add generic compatible string to IIC node
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH v2 0/5] renesas,iic: Fixes and DT binding to json-schema conversion
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH v2 4/5] arm64: dts: renesas: r8a77990: Add generic compatible string to IIC node
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH v2 1/5] dt-bindings: i2c: renesas,iic: Always declare generic compatibility
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• Re: [PATCH 3/3] i2c:support new register set for ast2600
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] i2c:support new register set for ast2600
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: Drop redundant minItems/maxItems
  • From: Arnaud POULIQUEN <arnaud.pouliquen@xxxxxxxxxxx>
• Re: [RESEND PATCH v4 06/10] dt-bindings: gpio: change items restriction of clock for rockchip,gpio-bank
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• Re: [PATCH 3/3] i2c:support new register set for ast2600
  • From: Jamin Lin <jamin_lin@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3] i2c:support new register set for ast2600
  • From: Jamin Lin <jamin_lin@xxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: Drop redundant minItems/maxItems
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 00/29] docs: avoid using ReST :doc:`foo` tag
  • From: Jonathan Corbet <corbet@xxxxxxx>
• Re: [PATCH v7 1/4] PCI: Introduce pcim_alloc_irq_vectors()
  • From: Dejin Zheng <zhengdejin5@xxxxxxxxx>
• Re: [PATCH] dt-bindings: Drop redundant minItems/maxItems
  • From: Suman Anna <s-anna@xxxxxx>
• Re: [PATCH v7 1/4] PCI: Introduce pcim_alloc_irq_vectors()
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: Drop redundant minItems/maxItems
  • From: Jassi Brar <jassisinghbrar@xxxxxxxxx>
• Re: [PATCH v7 1/4] PCI: Introduce pcim_alloc_irq_vectors()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 6/6] mfd: tps68470: Remove tps68470 MFD driver
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 3/3] i2c:support new register set for ast2600
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] i2c:support new register set for ast2600
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH 3/3] i2c:support new register set for ast2600
  • From: Jamin Lin <jamin_lin@xxxxxxxxxxxxxx>
• [PATCH 2/3] dt-bindings: i2c-new: Add bindings for AST2600 I2C
  • From: Jamin Lin <jamin_lin@xxxxxxxxxxxxxx>
• [PATCH 1/3] dts: aspeed: Add node for AST2600 I2C and I2CS
  • From: Jamin Lin <jamin_lin@xxxxxxxxxxxxxx>
• [PATCH 0/3] *** Support ASPEED AST2600 I2C ***
  • From: Jamin Lin <jamin_lin@xxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: Drop redundant minItems/maxItems
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH] eeprom: at24: Support custom device names for AT24 EEPROMs
  • From: Alexander Fomichev <fomichev.ru@xxxxxxxxx>
• Re: [PATCH 4/7] spi: spi-geni-qcom: Add support for GPI dma
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v5 5/6] platform/x86: Add intel_skl_int3472 driver
  • From: Daniel Scally <djrscally@xxxxxxxxx>
• Re: [PATCH v7 1/4] PCI: Introduce pcim_alloc_irq_vectors()
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH] eeprom: at24: Support custom device names for AT24 EEPROMs
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: Drop redundant minItems/maxItems
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v5 5/6] platform/x86: Add intel_skl_int3472 driver
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v5 5/6] platform/x86: Add intel_skl_int3472 driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v5 5/6] platform/x86: Add intel_skl_int3472 driver
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH] eeprom: at24: Support custom device names for AT24 EEPROMs
  • From: Alexander Fomichev <fomichev.ru@xxxxxxxxx>
• Re: [PATCH] eeprom: at24: Support custom device names for AT24 EEPROMs
  • From: Alexander Fomichev <fomichev.ru@xxxxxxxxx>
• [PATCH v1 1/1] i2c: parport: Switch to use module_parport_driver()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: Drop redundant minItems/maxItems
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/7] spi: spi-geni-qcom: Add support for GPI dma
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH 4/7] spi: spi-geni-qcom: Add support for GPI dma
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: Drop redundant minItems/maxItems
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: Drop redundant minItems/maxItems
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: Drop redundant minItems/maxItems
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: Drop redundant minItems/maxItems
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH 4/7] spi: spi-geni-qcom: Add support for GPI dma
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH v2 18/29] docs: i2c: avoid using ReST :doc:`foo` markup
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• [PATCH v2 00/29] docs: avoid using ReST :doc:`foo` tag
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: Drop redundant minItems/maxItems
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 2/2] i2c: aspeed: Acknowledge Tx done with and without ACK irq late
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 1/2] i2c: aspeed: Fix unhandled Tx done with NAK
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 0/2] i2c: aspeed: Late ack Tx done irqs and fix unhandled Tx done with NAK
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] dt-bindings: Drop redundant minItems/maxItems
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v3 2/2] i2c: riic: Add RZ/G2L support
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: i2c: renesas,riic: Document RZ/G2L I2C controller
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v3 0/2] Add RZ/G2L I2C support
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] i2c: riic: Add RZ/G2L support
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] i2c: riic: Add RZ/G2L support
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] i2c: riic: Add RZ/G2L support
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH v2 2/2] i2c: riic: Add RZ/G2L support
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: i2c: renesas,riic: Document RZ/G2L I2C controller
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v2 0/2] Add RZ/G2L I2C support
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: i801: Improve i801_setup_hstcfg
  • From: Jean Delvare <jdelvare@xxxxxxx>
• RE: [PATCH 3/5] i2c: riic: Add RZ/G2L support
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: i801: Use driver name constant instead of function dev_driver_string
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH] i2c: i801: Simplify initialization of i2c_board_info in i801_probe_optional_slaves
  • From: Jean Delvare <jdelvare@xxxxxxx>
• RE: [PATCH 3/5] i2c: riic: Add RZ/G2L support
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: i801: Improve status polling
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH 3/5] i2c: riic: Add RZ/G2L support
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>