Linux Kernel I2C

• Thread Index

• Re: [PATCH 3/5] i2c: riic: Add RZ/G2L support
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• Re: [PATCH 1/5] dt-bindings: i2c: renesas,riic: Document RZ/G2L I2C controller
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 3/5] i2c: riic: Add RZ/G2L support
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH] i2c: qcom-cci: add sm8250 compatible
  • From: Loic Poulain <loic.poulain@xxxxxxxxxx>
• [PATCH 3/5] i2c: riic: Add RZ/G2L support
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH 1/5] dt-bindings: i2c: renesas,riic: Document RZ/G2L I2C controller
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH 0/5] Add RZ/G2L I2C support
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v7 1/4] PCI: Introduce pcim_alloc_irq_vectors()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/4] ARM: dts: dra7x-evm: Drop "ti,pcf8575"
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v7 1/4] PCI: Introduce pcim_alloc_irq_vectors()
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v3 1/1] dt-bindings: aspeed-i2c: Convert txt to yaml format
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [rfc, PATCH v1 0/7] PCI: introduce p2sb helper
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [rfc, PATCH v1 0/7] PCI: introduce p2sb helper
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• Re: [rfc, PATCH v1 0/7] PCI: introduce p2sb helper
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [rfc, PATCH v1 0/7] PCI: introduce p2sb helper
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• Re: [PATCH v2 1/1] i2c: cht-wc: Replace of_node by NULL
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 1/1] i2c: cht-wc: Replace of_node by NULL
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] i2c: mediatek: Dump i2c/dma register when a timeout occurs
  • From: Kewei Xu <kewei.xu@xxxxxxxxxxxx>
• [PATCH 7/7] i2cdump: Remove support for SMBus block mode
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH 6/7] i2cdump: Deprecate SMBus block mode
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH 5/7] i2cdump: Add range support with mode i (I2C block)
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH 4/7] i2cdump: Remove dead code
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH 3/7] i2cget: Add support for SMBus block read
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH 2/7] i2cget: Document the support of I2C block reads
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH 1/7] i2cget: Add support for I2C block data
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH 0/7] Rework block read support among i2cget and i2cdump
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v7 1/4] PCI: Introduce pcim_alloc_irq_vectors()
  • From: Dejin Zheng <zhengdejin5@xxxxxxxxx>
• Re: [PATCH v7 1/4] PCI: Introduce pcim_alloc_irq_vectors()
  • From: Dejin Zheng <zhengdejin5@xxxxxxxxx>
• Re: [PATCH 2/3] i2c: mediatek: Dump i2c/dma register when a timeout occurs
  • From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: i2c: update bindings for MT8195 SoC
  • From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
• Re: [PATCH i2c-tools] Revert "tools: i2ctransfer: add check for returned length from driver"
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH i2c-tools] Revert "tools: i2ctransfer: add check for returned length from driver"
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH -next] i2c: Fix missing pci_disable_device() on error in ali1535_setup()
  • From: Samuel Zou <zou_wei@xxxxxxxxxx>
• Re: [PATCH -next] i2c: Fix missing pci_disable_device() on error in ali1535_setup()
  • From: Jean Delvare <jdelvare@xxxxxxx>
• RE: [PATCH 02/10] i2c: xiic: Add standard mode support for > 255 byte read transfers
  • From: Raviteja Narayanam <rna@xxxxxxxxxx>
• Re: [PATCH v5 0/6] Introduce intel_skl_int3472 module
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v5 0/6] Introduce intel_skl_int3472 module
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v2 1/3] units: Add SI metric prefix definitions
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH 00/34] docs: avoid using ReST :doc:`foo` tag
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• [PATCH 3/3] i2c: mediatek: Reset the handshake signal between i2c and dma
  • From: Kewei Xu <kewei.xu@xxxxxxxxxxxx>
• [PATCH 2/3] i2c: mediatek: Dump i2c/dma register when a timeout occurs
  • From: Kewei Xu <kewei.xu@xxxxxxxxxxxx>
• [PATCH 0/3] add i2c support for mt8195
  • From: Kewei Xu <kewei.xu@xxxxxxxxxxxx>
• [PATCH 1/3] dt-bindings: i2c: update bindings for MT8195 SoC
  • From: Kewei Xu <kewei.xu@xxxxxxxxxxxx>
• Re: [PATCH 00/34] docs: avoid using ReST :doc:`foo` tag
  • From: Nícolas F. R. A. Prado <n@xxxxxxxxxxxxx>
• Re: [RFC PATCH 3/3] i2c: aspeed: allow 255 byte block transfers
  • From: Brendan Higgins <brendanhiggins@xxxxxxxxxx>
• Re: [PATCH v2 1/3] units: Add SI metric prefix definitions
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH v7 1/4] PCI: Introduce pcim_alloc_irq_vectors()
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v2 1/3] units: Add SI metric prefix definitions
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 1/4] PCI: Introduce pcim_alloc_irq_vectors()
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v7 1/4] PCI: Introduce pcim_alloc_irq_vectors()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v7 2/4] Documentation: devres: Add pcim_alloc_irq_vectors()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] units: Add SI metric prefix definitions
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH v2 1/3] units: Add SI metric prefix definitions
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] units: Add SI metric prefix definitions
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH v7 4/4] i2c: thunderx: Use pcim_alloc_irq_vectors() to allocate IRQ vectors
  • From: Dejin Zheng <zhengdejin5@xxxxxxxxx>
• [PATCH v7 3/4] i2c: designware: Use pcim_alloc_irq_vectors() to allocate IRQ vectors
  • From: Dejin Zheng <zhengdejin5@xxxxxxxxx>
• [PATCH v7 2/4] Documentation: devres: Add pcim_alloc_irq_vectors()
  • From: Dejin Zheng <zhengdejin5@xxxxxxxxx>
• [PATCH v7 1/4] PCI: Introduce pcim_alloc_irq_vectors()
  • From: Dejin Zheng <zhengdejin5@xxxxxxxxx>
• [PATCH v7 0/4] Introduce pcim_alloc_irq_vectors()
  • From: Dejin Zheng <zhengdejin5@xxxxxxxxx>
• [PATCH v2 2/3] i2c: designware: Use DIV_ROUND_CLOSEST() macro
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 1/3] units: Add SI metric prefix definitions
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 3/3] i2c: designware: Fix indentation in the header
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: i801: Ensure that SMBHSTSTS_INUSE_STS is cleared when leaving i801_access
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v3 5/7] i2c: aspeed: Add aspeed_set_slave_busy()
  • From: Graeme Gregory <graeme@xxxxxxxxxxxx>
• Re: [PATCH v5 2/6] ACPI: scan: Add function to fetch dependent of acpi device
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH resend v1 1/3] units: Add SI metric prefix definitions
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 0/4] Introduce pcim_alloc_irq_vectors()
  • From: Dejin Zheng <zhengdejin5@xxxxxxxxx>
• Re: [PATCH] eeprom: at24: Support custom device names for AT24 EEPROMs
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [PATCH v6 1/4] PCI: Introduce pcim_alloc_irq_vectors()
  • From: Dejin Zheng <zhengdejin5@xxxxxxxxx>
• Re: [PATCH resend v1 1/3] units: Add SI metric prefix definitions
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] eeprom: at24: Support custom device names for AT24 EEPROMs
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH resend v1 1/3] units: Add SI metric prefix definitions
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH] eeprom: at24: Support custom device names for AT24 EEPROMs
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [PATCH v6 0/4] Introduce pcim_alloc_irq_vectors()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 00/34] docs: avoid using ReST :doc:`foo` tag
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• [PATCH -next] i2c: Fix missing pci_disable_device() on error in ali1535_setup()
  • From: Zou Wei <zou_wei@xxxxxxxxxx>
• Re: [PATCH v2] i2c: i801: Ensure that SMBHSTSTS_INUSE_STS is cleared when leaving i801_access
  • From: Hector Martin <marcan@xxxxxxxxx>
• Re: [PATCH 00/34] docs: avoid using ReST :doc:`foo` tag
  • From: Nícolas F. R. A. Prado <n@xxxxxxxxxxxxx>
• Re: [PATCH v6 1/4] PCI: Introduce pcim_alloc_irq_vectors()
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v2] i2c: i801: Ensure that SMBHSTSTS_INUSE_STS is cleared when leaving i801_access
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH] i2c: i801: Ensure that SMBHSTSTS_INUSE_STS is cleared when leaving i801_access
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] i2c: i801: Ensure that SMBHSTSTS_INUSE_STS is cleared when leaving i801_access
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH v6 4/4] i2c: thunderx: Use pcim_alloc_irq_vectors() to allocate IRQ vectors
  • From: Dejin Zheng <zhengdejin5@xxxxxxxxx>
• [PATCH v6 1/4] PCI: Introduce pcim_alloc_irq_vectors()
  • From: Dejin Zheng <zhengdejin5@xxxxxxxxx>
• [PATCH v6 3/4] i2c: designware: Use pcim_alloc_irq_vectors() to allocate IRQ vectors
  • From: Dejin Zheng <zhengdejin5@xxxxxxxxx>
• [PATCH v6 2/4] Documentation: devres: Add pcim_alloc_irq_vectors()
  • From: Dejin Zheng <zhengdejin5@xxxxxxxxx>
• [PATCH v6 0/4] Introduce pcim_alloc_irq_vectors()
  • From: Dejin Zheng <zhengdejin5@xxxxxxxxx>
• Re: [PATCH v5 1/4] PCI: Introduce pcim_alloc_irq_vectors()
  • From: Dejin Zheng <zhengdejin5@xxxxxxxxx>
• Re: [PATCH v5 5/6] platform/x86: Add intel_skl_int3472 driver
  • From: Daniel Scally <djrscally@xxxxxxxxx>
• Re: [PATCH v2] i2c: core: Disable client irq on reboot/shutdown
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PULL REQUEST] i2c for v5.13-rc5
  • From: pr-tracker-bot@xxxxxxxxxx
• [PULL REQUEST] i2c for v5.13-rc5
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 00/34] docs: avoid using ReST :doc:`foo` tag
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• Re: [PATCH 23/34] docs: i2c: avoid using ReSt :doc:`foo` markup
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 00/34] docs: avoid using ReST :doc:`foo` tag
  • From: Nícolas F. R. A. Prado <n@xxxxxxxxxxxxx>
• Re: [PATCH 00/34] docs: avoid using ReST :doc:`foo` tag
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• [PATCH 23/34] docs: i2c: avoid using ReSt :doc:`foo` markup
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• [PATCH 00/34] docs: avoid using ReST :doc:`foo` tag
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• Re: [PATCH] i2c: cp2615: check for allocation failure in cp2615_i2c_recv()
  • From: Bence Csókás <bence98@xxxxxxxxxx>
• [PATCH v2] i2c: core: Disable client irq on reboot/shutdown
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH] i2c: core: Disable client irq on reboot/shutdown
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH] i2c: core: Disable client irq on reboot/shutdown
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 4/4] dt-bindings: gpio: pcf857x: Convert to json-schema
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2 4/4] dt-bindings: gpio: pcf857x: Convert to json-schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: i2c: ce4100: Replace "ti,pcf8575" by "nxp,pcf8575"
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] i2c: core: Disable client irq on reboot/shutdown
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH] i2c: cp2615: check for allocation failure in cp2615_i2c_recv()
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: i2c-mux: Remove reset-active-low from ssd1307fb examples
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH V11 2/2] i2c: i2c-qcom-geni: Suspend and resume the bus during SYSTEM_SLEEP_PM ops
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH V11 1/2] i2c: i2c-qcom-geni: Add shutdown callback for i2c
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v3] dt-bindings: i2c: Move i2c-omap.txt to YAML format
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: i2c: ce4100: Replace "ti,pcf8575" by "nxp,pcf8575"
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: Add linux-renesas-soc to the Renesas I2C entries
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH i2c-tools] Revert "tools: i2ctransfer: add check for returned length from driver"
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 4/6] gpiolib: acpi: Add acpi_gpio_get_io_resource()
  • From: Daniel Scally <djrscally@xxxxxxxxx>
• Re: [PATCH v5 4/6] gpiolib: acpi: Add acpi_gpio_get_io_resource()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 3/6] gpiolib: acpi: Export acpi_get_gpiod()
  • From: Daniel Scally <djrscally@xxxxxxxxx>
• Re: [PATCH v5 4/6] gpiolib: acpi: Add acpi_gpio_get_io_resource()
  • From: Daniel Scally <djrscally@xxxxxxxxx>
• Re: [PATCH i2c-tools] Revert "tools: i2ctransfer: add check for returned length from driver"
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v5 4/6] gpiolib: acpi: Add acpi_gpio_get_io_resource()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 3/6] gpiolib: acpi: Export acpi_get_gpiod()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] eeprom: at24: Support custom device names for AT24 EEPROMs
  • From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
• Re: [PATCH 09/16] i2c: busses: i2c-mxs: Demote barely half complete kernel-doc header
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 09/16] i2c: busses: i2c-mxs: Demote barely half complete kernel-doc header
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 05/16] i2c: busses: i2c-axxia: Fix formatting issue in struct and demote unworthy kernel-doc headers
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 09/16] i2c: busses: i2c-mxs: Demote barely half complete kernel-doc header
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v5 5/6] platform/x86: Add intel_skl_int3472 driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v5 5/6] platform/x86: Add intel_skl_int3472 driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [i2c-tools PATCH] tools: i2cbusses: Handle bus names like /dev/i2c-0
  • From: Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH v5 3/6] gpiolib: acpi: Export acpi_get_gpiod()
  • From: Daniel Scally <djrscally@xxxxxxxxx>
• [PATCH v5 1/6] ACPI: scan: Extend acpi_walk_dep_device_list()
  • From: Daniel Scally <djrscally@xxxxxxxxx>
• [PATCH v5 6/6] mfd: tps68470: Remove tps68470 MFD driver
  • From: Daniel Scally <djrscally@xxxxxxxxx>
• [PATCH v5 2/6] ACPI: scan: Add function to fetch dependent of acpi device
  • From: Daniel Scally <djrscally@xxxxxxxxx>
• [PATCH v5 0/6] Introduce intel_skl_int3472 module
  • From: Daniel Scally <djrscally@xxxxxxxxx>
• [PATCH v5 5/6] platform/x86: Add intel_skl_int3472 driver
  • From: Daniel Scally <djrscally@xxxxxxxxx>
• [PATCH v5 4/6] gpiolib: acpi: Add acpi_gpio_get_io_resource()
  • From: Daniel Scally <djrscally@xxxxxxxxx>
• Re: [PATCH 09/16] i2c: busses: i2c-mxs: Demote barely half complete kernel-doc header
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 05/16] i2c: busses: i2c-axxia: Fix formatting issue in struct and demote unworthy kernel-doc headers
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 04/16] i2c: busses: i2c-altera: Fix formatting issue in struct and demote unworthy kernel-doc headers
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 04/12] dt-bindings: clock: update ti,sci-clk.yaml references
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 03/12] dt-bindings: soc: ti: update sci-pm-domain.yaml references
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 00/12] Fix broken docs references at next-20210602
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH v3] i2c: bcm-iproc: Add i2c recovery support
  • From: Ray Jui <ray.jui@xxxxxxxxxxxx>
• Re: [PATCH] i2c: bcm-iproc: Add i2c recovery support
  • From: Ray Jui <ray.jui@xxxxxxxxxxxx>
• [PATCH resend v1 3/3] i2c: designware: Fix indentation in the header
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH resend v1 2/3] i2c: designware: Use DIV_ROUND_CLOSEST() macro
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH resend v1 1/3] units: Add SI metric prefix definitions
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 2/3] i2c: designware: Use DIV_ROUND_CLOSEST() macro
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 3/3] i2c: designware: Fix indentation in the header
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 1/3] units: Add SI metric prefix definitions
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: core: Add stub for i2c_verify_client() if !CONFIG_I2C
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH] i2c: core: Add stub for i2c_verify_client() if !CONFIG_I2C
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: core: Add stub for i2c_verify_client() if !CONFIG_I2C
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 02/10] i2c: xiic: Add standard mode support for > 255 byte read transfers
  • From: Marek Vasut <marex@xxxxxxx>
• RE: [PATCH 02/10] i2c: xiic: Add standard mode support for > 255 byte read transfers
  • From: Raviteja Narayanam <rna@xxxxxxxxxx>
• [PATCH v3] i2c: bcm-iproc: Add i2c recovery support
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH v3 1/1] dt-bindings: aspeed-i2c: Convert txt to yaml format
  • From: Jamin Lin <jamin_lin@xxxxxxxxxxxxxx>
• [PATCH v3 0/1] dt-bindings-aspeed-i2 Convert to yaml format
  • From: Jamin Lin <jamin_lin@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/1] dt-bindings: aspeed-i2c: Convert txt to yaml format
  • From: Jamin Lin <jamin_lin@xxxxxxxxxxxxxx>
• Re: [PATCH 04/12] dt-bindings: clock: update ti,sci-clk.yaml references
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 03/12] dt-bindings: soc: ti: update sci-pm-domain.yaml references
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/1] dt-bindings: aspeed-i2c: Convert txt to yaml format
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3] dt-bindings: i2c: Move i2c-omap.txt to YAML format
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] eeprom: at24: Support custom device names for AT24 EEPROMs
  • From: Alexander Fomichev <fomichev.ru@xxxxxxxxx>
• Re: [PATCH] misc: eeprom: at24: fix NVMEM name with custom AT24 device name
  • From: Alexander Fomichev <fomichev.ru@xxxxxxxxx>
• Re: [PATCH i2c-tools] Revert "tools: i2ctransfer: add check for returned length from driver"
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 03/12] dt-bindings: soc: ti: update sci-pm-domain.yaml references
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• [PATCH 00/12] Fix broken docs references at next-20210602
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• [PATCH 04/12] dt-bindings: clock: update ti,sci-clk.yaml references
  • From: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
• Re: [PATCH i2c-tools] Revert "tools: i2ctransfer: add check for returned length from driver"
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v21 RESEND 4/4] arm64: dts: mt8183: add supply name for eeprom
  • From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
• Re: [PATCH 02/10] i2c: xiic: Add standard mode support for > 255 byte read transfers
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH v5 1/4] PCI: Introduce pcim_alloc_irq_vectors()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [i2c-tools PATCH] tools: i2cbusses: Handle bus names like /dev/i2c-0
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH V11 1/2] i2c: i2c-qcom-geni: Add shutdown callback for i2c
  • From: rojay@xxxxxxxxxxxxxx
• [RFC PATCH 3/3] i2c: aspeed: allow 255 byte block transfers
  • From: Matt Johnston <matt@xxxxxxxxxxxxxxxxxxxx>
• [RFC PATCH 1/3] i2c: core: Allow 255 byte transfers for SMBus 3.x
  • From: Matt Johnston <matt@xxxxxxxxxxxxxxxxxxxx>
• [RFC PATCH 0/3] Increase SMBus max block size to 255
  • From: Matt Johnston <matt@xxxxxxxxxxxxxxxxxxxx>
• [RFC PATCH 2/3] i2c: dev: Handle 255 byte blocks for i2c ioctl
  • From: Matt Johnston <matt@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: bcm-iproc: Add i2c recovery support
  • From: Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: bcm-iproc: Add i2c recovery support
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v2] i2c: bcm-iproc: Add i2c recovery support
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: bcm-iproc: Add i2c recovery support
  • From: Ray Jui <ray.jui@xxxxxxxxxxxx>
• Re: [PATCH] i2c: bcm-iproc: Add i2c recovery support
  • From: Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: bcm-iproc: Add i2c recovery support
  • From: Ray Jui <ray.jui@xxxxxxxxxxxx>
• RE: [PATCH] misc: eeprom: at24: fix NVMEM name with custom AT24 device name
  • From: Diego Santa Cruz <Diego.SantaCruz@xxxxxxxxxxxx>
• Re: [PATCH v2 1/6] dt-bindings: mfd: ti,j721e-system-controller: Fix mux node errors
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH v2 4/4] dt-bindings: gpio: pcf857x: Convert to json-schema
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• Re: [PATCH v2 3/4] x86: ce4100: Replace "ti,pcf8575" by "nxp,pcf8575"
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v2 1/4] dt-bindings: i2c: ce4100: Replace "ti,pcf8575" by "nxp,pcf8575"
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH v2 2/4] ARM: dts: dra7x-evm: Drop "ti,pcf8575"
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH v2 3/4] x86: ce4100: Replace "ti,pcf8575" by "nxp,pcf8575"
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH v2 0/4] pcf857x: DTS fixes and DT binding to json-schema conversion
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH] MAINTAINERS: Add linux-renesas-soc to the Renesas I2C entries
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• Re: [PATCH 15/16] i2c: busses: i2c-tegra-bpmp: Demote kernel-doc abuses
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• [PATCH -next] i2c: bcm2835: add missing disable and put clk on error in bcm2835_i2c_probe()
  • From: Yang Yingliang <yangyingliang@xxxxxxxxxx>
• Re: [PATCH 4/4] clk: stm32: Fix ltdc's clock turn off by clk_disable_unused() after kernel startup
  • From: Patrice CHOTARD <patrice.chotard@xxxxxxxxxxx>
• Re: [PATCH 3/4] clk: stm32: Fix stm32f429's ltdc driver hang in set clock rate
  • From: Patrice CHOTARD <patrice.chotard@xxxxxxxxxxx>
• Re: [PATCH] misc: eeprom: at24: fix NVMEM name with custom AT24 device name
  • From: Alexander Fomichev <fomichev.ru@xxxxxxxxx>
• Re: [PATCH 2/4] i2c: stm32f4: Fix stmpe811 get xyz data timeout issue
  • From: Dillon Min <dillon.minfei@xxxxxxxxx>
• Re: [PATCH 2/4] i2c: stm32f4: Fix stmpe811 get xyz data timeout issue
  • From: Patrice CHOTARD <patrice.chotard@xxxxxxxxxxx>
• Re: [PATCH 0/4] Fix the i2c/clk bug of stm32 mcu platform
  • From: Dillon Min <dillon.minfei@xxxxxxxxx>
• Re: [PATCH 1/4] drm/panel: Add ilitek ili9341 panel driver
  • From: Dillon Min <dillon.minfei@xxxxxxxxx>
• Re: [PATCH 03/10] i2c: xiic: Fix coding style issues
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH 0/4] Fix the i2c/clk bug of stm32 mcu platform
  • From: Dillon Min <dillon.minfei@xxxxxxxxx>
• Re: [PATCH 0/4] Fix the i2c/clk bug of stm32 mcu platform
  • From: Patrice CHOTARD <patrice.chotard@xxxxxxxxxxx>
• Re: [PATCH 1/4] drm/panel: Add ilitek ili9341 panel driver
  • From: Dillon Min <dillon.minfei@xxxxxxxxx>
• Re: [PATCH 0/4] Fix the i2c/clk bug of stm32 mcu platform
  • From: Dillon Min <dillon.minfei@xxxxxxxxx>
• Re: [PATCH 0/4] Fix the i2c/clk bug of stm32 mcu platform
  • From: Patrice CHOTARD <patrice.chotard@xxxxxxxxxxx>
• [PATCH 10/10] i2c: xiic: Update compatible with new IP version
  • From: Raviteja Narayanam <raviteja.narayanam@xxxxxxxxxx>
• [PATCH 09/10] dt-bindings: i2c: xiic: Add 'xlnx,axi-iic-2.1' to compatible
  • From: Raviteja Narayanam <raviteja.narayanam@xxxxxxxxxx>
• [PATCH 06/10] i2c: xiic: Fix the type check for xiic_wakeup
  • From: Raviteja Narayanam <raviteja.narayanam@xxxxxxxxxx>
• [PATCH 08/10] i2c: xiic: Remove interrupt enable/disable in Rx path
  • From: Raviteja Narayanam <raviteja.narayanam@xxxxxxxxxx>
• [PATCH 07/10] i2c: xiic: Switch to Xiic standard mode for i2c-read
  • From: Raviteja Narayanam <raviteja.narayanam@xxxxxxxxxx>
• [PATCH 05/10] i2c: xiic: Return value of xiic_reinit
  • From: Raviteja Narayanam <raviteja.narayanam@xxxxxxxxxx>
• [PATCH 04/10] i2c: xiic: Add smbus_block_read functionality
  • From: Raviteja Narayanam <raviteja.narayanam@xxxxxxxxxx>
• Re: [PATCH 0/4] Fix the i2c/clk bug of stm32 mcu platform
  • From: Patrice CHOTARD <patrice.chotard@xxxxxxxxxxx>
• [PATCH 03/10] i2c: xiic: Fix coding style issues
  • From: Raviteja Narayanam <raviteja.narayanam@xxxxxxxxxx>
• [PATCH 00/10] i2c: xiic: Add features, bug fixes.
  • From: Raviteja Narayanam <raviteja.narayanam@xxxxxxxxxx>
• [PATCH 01/10] i2c: xiic: Fix Tx Interrupt path for grouped messages
  • From: Raviteja Narayanam <raviteja.narayanam@xxxxxxxxxx>
• [PATCH 02/10] i2c: xiic: Add standard mode support for > 255 byte read transfers
  • From: Raviteja Narayanam <raviteja.narayanam@xxxxxxxxxx>
• Re: [PATCH 1/4] drm/panel: Add ilitek ili9341 panel driver
  • From: Patrice CHOTARD <patrice.chotard@xxxxxxxxxxx>
• Re: [PATCH V11 1/2] i2c: i2c-qcom-geni: Add shutdown callback for i2c
  • From: rojay@xxxxxxxxxxxxxx
• [PATCH] i2c: bcm-iproc: Add i2c recovery support
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH] i2c: highlander: add IRQ check
  • From: Sergey Shtylyov <s.shtylyov@xxxxxx>
• Re: [PATCH0/2] Fix deferred probing in the I2C bus drivers
  • From: Sergey Shtylyov <s.shtylyov@xxxxxx>
• Re: [PATCH0/2] Fix deferred probing in the I2C bus drivers
  • From: Sergey Shtylyov <s.shtylyov@xxxxxx>
• Re: [PULL REQUEST] i2c for v5.13-rc4
  • From: pr-tracker-bot@xxxxxxxxxx
• [PULL REQUEST] i2c for v5.13-rc4
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: adjust to removing i2c designware platform data
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 0/6] dt-bindings: Convert mux bindings to schema
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH0/2] Fix deferred probing in the I2C bus drivers
  • From: Sergey Shtylyov <s.shtylyov@xxxxxx>
• Re: [PATCH] i2cdetect: Sort the bus list by number
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v21 RESEND 4/4] arm64: dts: mt8183: add supply name for eeprom
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v21 RESEND 3/4] i2c: mediatek: mt65xx: add optional vbus-supply
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v21 RESEND 2/4] dt-binding: i2c: mt65xx: add vbus-supply property
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v21 RESEND 1/4] i2c: core: support bus regulator controlling in adapter
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: adjust to removing i2c designware platform data
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: adjust to removing i2c designware platform data
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: adjust to removing i2c designware platform data
  • From: Lukas Bulwahn <lukas.bulwahn@xxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: i2c-mux: Remove reset-active-low from ssd1307fb examples
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: adjust to removing i2c designware platform data
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: adjust to removing i2c designware platform data
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: adjust to removing i2c designware platform data
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: i2c-mux: Remove reset-active-low from ssd1307fb examples
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH/RFC 4/6] dt-bindings: i2c: renesas,iic: Convert to json-schema
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: i2c-mux: Remove reset-active-low from ssd1307fb examples
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 1/2] i2c: core: Make debug message even more debuggish
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH/RFC 4/6] dt-bindings: i2c: renesas,iic: Convert to json-schema
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: i2c: renesas,riic: Convert to json-schema
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH] dt-bindings: i2c: i2c-mux: Remove reset-active-low from ssd1307fb examples
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH v2] dt-bindings: i2c: renesas,riic: Convert to json-schema
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• Re: [PATCH v1 1/6] i2c: acpi: Export i2c_acpi_find_client_by_adev() for users
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: brcm,iproc-i2c: convert to the json-schema
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: brcm,iproc-i2c: convert to the json-schema
  • From: Rafał Miłecki <rafal@xxxxxxxxxx>
• Re: [PATCH v1 1/6] i2c: acpi: Export i2c_acpi_find_client_by_adev() for users
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 1/6] i2c: acpi: Export i2c_acpi_find_client_by_adev() for users
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1 1/6] i2c: acpi: Export i2c_acpi_find_client_by_adev() for users
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 1/6] i2c: acpi: Export i2c_acpi_find_client_by_adev() for users
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: brcm,iproc-i2c: convert to the json-schema
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• [PATCH v2 2/2] i2c: core: Propagate all possible errors when requesting recovery GPIOs
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 1/2] i2c: core: Make debug message even more debuggish
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/6] dt-bindings: Convert mux bindings to schema
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: core: export i2c_smbus_pec()
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 01/16] i2c: busses: i2c-nomadik: Fix formatting issue pertaining to 'timeout'
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [RESEND PATCH] i2c: s3c2410: fix possible NULL pointer deref on read message after write
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: mediatek: Disable i2c start_en and clear intr_stat brfore reset
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH V11 1/2] i2c: i2c-qcom-geni: Add shutdown callback for i2c
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 0/2] ARM: dts: r8a7745,r8a7794: Remove generic compatible strings from iic blocks
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 01/16] i2c: busses: i2c-nomadik: Fix formatting issue pertaining to 'timeout'
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 01/16] i2c: busses: i2c-nomadik: Fix formatting issue pertaining to 'timeout'
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 5/6] dt-bindings: i2c: renesas,riic: Convert to json-schema
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 6/6] dt-bindings: i2c: renesas,iic-emev2: Convert to json-schema
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/6] dt-bindings: i2c: renesas,i2c: Convert to json-schema
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/6] dt-bindings: i2c: renesas,i2c: Drop "renesas,i2c-rcar"
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/6] i2c: rcar: Drop "renesas,i2c-rcar"
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/4] Fix the i2c/clk bug of stm32 mcu platform
  • From: Dillon Min <dillon.minfei@xxxxxxxxx>
• RE: [PATCH v3 5/7] i2c: aspeed: Add aspeed_set_slave_busy()
  • From: Ryan Chen <ryan_chen@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/1] dt-bindings: aspeed-i2c: Convert txt to yaml format
  • From: Jamin Lin <jamin_lin@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: mediatek: Disable i2c start_en and clear intr_stat brfore reset
  • From: Qii Wang <qii.wang@xxxxxxxxxxxx>
• Re: [PATCH v3 5/7] i2c: aspeed: Add aspeed_set_slave_busy()
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 5/7] i2c: aspeed: Add aspeed_set_slave_busy()
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/1] dt-bindings: aspeed-i2c: Convert txt to yaml format
  • From: "Andrew Jeffery" <andrew@xxxxxxxx>
• Re: [PATCH v1 1/1] i2c: core: Make debug message even more debuggish
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1 1/6] i2c: acpi: Export i2c_acpi_find_client_by_adev() for users
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: core: Add stub for i2c_verify_client() if !CONFIG_I2C
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [RESEND] i2c: mediatek: Rename i2c irq name
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: mediatek: Disable i2c start_en and clear intr_stat brfore reset
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: i801: Use standard PCI constants instead of own ones
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 2/2] i2c: i801: Replace waitqueue with completion API
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 1/2] i2c: i801: Remove unneeded warning after wait_event_timeout timeout
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: i801: Don't generate an interrupt on bus reset
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v3 0/4] P2040/P2041 i2c recovery erratum
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2] i2c: aspeed: disable additional device addresses on ast2[56]xx
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 16/16] i2c: busses: i2c-st: trivial: Fix spelling issue 'enmpty => empty'
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 14/16] i2c: busses: i2c-stm32f4: Remove incorrectly placed ' ' from function name
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 13/16] i2c: busses: i2c-st: Fix copy/paste function misnaming issues
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 10/16] i2c: busses: i2c-ocores: Place the expected function names into the documentation headers
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 08/16] i2c: busses: i2c-eg20t: Fix 'bad line' issue and provide description for 'msgs' param
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 03/16] i2c: busses: i2c-ali1563: File headers are not good candidates for kernel-doc
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 02/16] i2c: muxes: i2c-arb-gpio-challenge: Demote non-conformant kernel-doc headers
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 01/16] i2c: busses: i2c-nomadik: Fix formatting issue pertaining to 'timeout'
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• [PATCH] i2c: mediatek: Disable i2c start_en and clear intr_stat brfore reset
  • From: <qii.wang@xxxxxxxxxxxx>
• [RESEND] i2c: mediatek: Rename i2c irq name
  • From: <qii.wang@xxxxxxxxxxxx>
• [PATCH v2 1/1] dt-bindings: aspeed-i2c: Convert txt to yaml format
  • From: Jamin Lin <jamin_lin@xxxxxxxxxxxxxx>
• [PATCH v2 0/1] dt-bindings-aspeed-i2 Convert to yaml format
  • From: Jamin Lin <jamin_lin@xxxxxxxxxxxxxx>
• [PATCH] i2cdetect: Sort the bus list by number
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH v21 RESEND 4/4] arm64: dts: mt8183: add supply name for eeprom
  • From: Hsin-Yi Wang <hsinyi@xxxxxxxxxxxx>
• [PATCH v21 RESEND 3/4] i2c: mediatek: mt65xx: add optional vbus-supply
  • From: Hsin-Yi Wang <hsinyi@xxxxxxxxxxxx>
• [PATCH v21 RESEND 2/4] dt-binding: i2c: mt65xx: add vbus-supply property
  • From: Hsin-Yi Wang <hsinyi@xxxxxxxxxxxx>
• [PATCH v21 RESEND 1/4] i2c: core: support bus regulator controlling in adapter
  • From: Hsin-Yi Wang <hsinyi@xxxxxxxxxxxx>
• [PATCH v21 RESEND 0/4] add power control in i2c
  • From: Hsin-Yi Wang <hsinyi@xxxxxxxxxxxx>
• Re: [PATCH 2/2] i2c: i801: Replace waitqueue with completion API
  • From: Daniel Kurtz <djkurtz@xxxxxxxxxx>
• Re: [PATCH v10] i2c: virtio: add a virtio i2c frontend driver
  • From: Jie Deng <jie.deng@xxxxxxxxx>
• Re: [PATCH] i2c: core: Add stub for i2c_verify_client() if !CONFIG_I2C
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [PATCH 01/16] i2c: busses: i2c-nomadik: Fix formatting issue pertaining to 'timeout'
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [i2c-tools PATCH] tools: i2cbusses: Handle bus names like /dev/i2c-0
  • From: Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/6] dt-bindings: rtc: nxp,pcf8563: Convert to DT schema
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH v2 5/6] dt-bindings: i2c: i2c-mux-pca954x: Convert to DT schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v2 6/6] dt-bindings: i2c: maxim,max9286: Use the i2c-mux.yaml schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v2 4/6] dt-bindings: i2c: Convert i2c-mux bindings to DT schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v2 3/6] dt-bindings: mux: Convert mux controller bindings to schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v2 2/6] dt-bindings: rtc: nxp,pcf8563: Convert to DT schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v2 1/6] dt-bindings: mfd: ti,j721e-system-controller: Fix mux node errors
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v2 0/6] dt-bindings: Convert mux bindings to schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v1 5/6] staging: atomisp: Move MIPI_PORT_LANES to the only user
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH] i2c: core: Add stub for i2c_verify_client() if !CONFIG_I2C
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH/RFC 4/6] dt-bindings: i2c: renesas,iic: Convert to json-schema
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH v1 4/6] staging: atomisp: Annotate a couple of definitions with __maybe_unused
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 2/6] staging: atomisp: Replace open-coded i2c_acpi_find_client_by_adev()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 3/6] staging: atomisp: Remove unused declarations
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 5/6] staging: atomisp: Move MIPI_PORT_LANES to the only user
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 1/6] i2c: acpi: Export i2c_acpi_find_client_by_adev() for users
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 6/6] staging: atomisp: Remove unused port_enabled variable
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [RESEND PATCH] i2c: s3c2410: fix possible NULL pointer deref on read message after write
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH v4 0/8] Introduce intel_skl_int3472 module
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v3] dt-bindings: i2c: Move i2c-omap.txt to YAML format
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• Re: [PATCH] i2c: i801: Don't generate an interrupt on bus reset
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 0/8] Introduce intel_skl_int3472 module
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 7/8] platform/x86: Add intel_skl_int3472 driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [i2c-tools PATCH] tools: i2cbusses: Handle bus names like /dev/i2c-0
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v2] dt-bindings: i2c: Move i2c-omap.txt to YAML format
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] i2c: designware: Fix kernel-doc
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• [PATCH] i2c: designware: Fix kernel-doc
  • From: Yang Li <yang.lee@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 0/4] P2040/P2041 i2c recovery erratum
  • From: Michael Ellerman <mpe@xxxxxxxxxxxxxx>
• Re: [PATCH v3 3/4] powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P1010 i2c controllers
  • From: Michael Ellerman <mpe@xxxxxxxxxxxxxx>
• Re: [PATCH v3 2/4] powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P2041 i2c controllers
  • From: Michael Ellerman <mpe@xxxxxxxxxxxxxx>
• Re: [PATCH v4 0/8] Introduce intel_skl_int3472 module
  • From: Daniel Scally <djrscally@xxxxxxxxx>
• Re: [PATCH v4 7/8] platform/x86: Add intel_skl_int3472 driver
  • From: Daniel Scally <djrscally@xxxxxxxxx>
• Re: [PATCH v4 6/8] gpiolib: acpi: Add acpi_gpio_get_io_resource()
  • From: Daniel Scally <djrscally@xxxxxxxxx>
• Re: [PATCH V11 2/2] i2c: i2c-qcom-geni: Suspend and resume the bus during SYSTEM_SLEEP_PM ops
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH V11 1/2] i2c: i2c-qcom-geni: Add shutdown callback for i2c
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH i2c-tools] Revert "tools: i2ctransfer: add check for returned length from driver"
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] iio: accel: fxls8962af: conditionally compile fxls8962af_i2c_raw_read_errata3()
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• [PATCH] i2c: i801: Use driver name constant instead of function dev_driver_string
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH] i2c: i801: Improve i801_setup_hstcfg
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH] i2c: i801: Simplify initialization of i2c_board_info in i801_probe_optional_slaves
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH] i2c: i801: Improve status polling
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH] i2c: sh_mobile: Use new clock calculation formulas for RZ/G2E
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: sh_mobile: Use new clock calculation formulas for RZ/G2E
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 2/2] i2c: stm32f7: add SMBus-Alert support
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v4 1/2] i2c: add binding to mark a bus as supporting SMBus-Alert
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v4 1/2] i2c: add binding to mark a bus as supporting SMBus-Alert
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2] i2c: I2C_HISI should depend on ACPI
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: qcom-geni: fix spelling mistake "unepxected" -> "unexpected"
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: icy: Remove unused variable new_fwnode in icy_probe()
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: qcom-geni: fix spelling mistake "unepxected" -> "unexpected"
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v4 01/10] dt-bindings: i2c: i2c-rk3x: add description for rk3568
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v3 0/4] P2040/P2041 i2c recovery erratum
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v3 0/4] P2040/P2041 i2c recovery erratum
  • From: "wsa@xxxxxxxxxx" <wsa@xxxxxxxxxx>
• [PATCH] i2c: i801: Don't generate an interrupt on bus reset
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH] decode-dimms: Actually decode LPDDR3 modules
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v4 0/8] Introduce intel_skl_int3472 module
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 0/8] Introduce intel_skl_int3472 module
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH V11 2/2] i2c: i2c-qcom-geni: Suspend and resume the bus during SYSTEM_SLEEP_PM ops
  • From: Roja Rani Yarubandi <rojay@xxxxxxxxxxxxxx>
• [PATCH V11 1/2] i2c: i2c-qcom-geni: Add shutdown callback for i2c
  • From: Roja Rani Yarubandi <rojay@xxxxxxxxxxxxxx>
• [PATCH V11 0/2] Implement Shutdown callback for geni_i2c
  • From: Roja Rani Yarubandi <rojay@xxxxxxxxxxxxxx>
• Re: [PATCH v4 0/8] Introduce intel_skl_int3472 module
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 2/2] i2c: i801: Replace waitqueue with completion API
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH 2/2] i2c: i801: Replace waitqueue with completion API
  • From: Jean Delvare <jdelvare@xxxxxxx>
• RE: [PATCH v3 5/7] i2c: aspeed: Add aspeed_set_slave_busy()
  • From: Ryan Chen <ryan_chen@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] i2c: i801: Remove unneeded warning after wait_event_timeout timeout
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH] i2c: i801: Use standard PCI constants instead of own ones
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [i2c-tools PATCH] tools: i2cbusses: Handle bus names like /dev/i2c-0
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] i2c: aspeed: avoid new registers definition of AST2600
  • From: Jamin Lin <jamin_lin@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] i2c: aspeed: avoid new registers definition of AST2600
  • From: Jamin Lin <jamin_lin@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] i2c: aspeed: avoid new registers definition of AST2600
  • From: Zev Weiss <zweiss@xxxxxxxxxxx>
• Re: [PATCH v3 5/7] i2c: aspeed: Add aspeed_set_slave_busy()
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [syzbot] KASAN: out-of-bounds Read in i801_isr
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• RE: [PATCH v3 5/7] i2c: aspeed: Add aspeed_set_slave_busy()
  • From: Ryan Chen <ryan_chen@xxxxxxxxxxxxxx>
• Re: [PATCH v3 5/7] i2c: aspeed: Add aspeed_set_slave_busy()
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH v3 5/7] i2c: aspeed: Add aspeed_set_slave_busy()
  • From: Ryan Chen <ryan_chen@xxxxxxxxxxxxxx>
• Re: [syzbot] KASAN: out-of-bounds Read in i801_isr
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH] i2c: robotfuzz-osif: fix control-request directions
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH 06/16] i2c: busses: i2c-cadence: Fix incorrectly documented 'enum cdns_i2c_slave_mode'
  • From: Michal Simek <michal.simek@xxxxxxxxxx>
• Re: [PATCH 1/3] i2c: aspeed: avoid new registers definition of AST2600
  • From: Joel Stanley <joel@xxxxxxxxx>
• Re: [PATCH 1/3] i2c: aspeed: avoid new registers definition of AST2600
  • From: Jamin Lin <jamin_lin@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] i2c: aspeed: avoid new registers definition of AST2600
  • From: Jamin Lin <jamin_lin@xxxxxxxxxxxxxx>
• [PATCH] i2c: i801: Use standard PCI constants instead of own ones
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 2/2] i2c: i801: Replace waitqueue with completion API
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 1/2] i2c: i801: Remove unneeded warning after wait_event_timeout timeout
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 0/2] i2c: i801: Replace waitqueue with completion API
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH v4 2/8] ACPI: scan: Add function to fetch dependent of acpi device
  • From: Daniel Scally <djrscally@xxxxxxxxx>
• Re: [PATCH V10] i2c: i2c-qcom-geni: Add shutdown callback for i2c
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH] i2c: i801: Use pm_runtime_forbid to prevent suspending
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH] iio: accel: fxls8962af: conditionally compile fxls8962af_i2c_raw_read_errata3()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V10] i2c: i2c-qcom-geni: Add shutdown callback for i2c
  • From: rojay@xxxxxxxxxxxxxx
• Re: i801_smbus: no runtime pm since a9c8088c7988 ("i2c: i801: Don't restore config registers on runtime PM")
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH 16/16] i2c: busses: i2c-st: trivial: Fix spelling issue 'enmpty => empty'
  • From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
• Re: [PATCH 13/16] i2c: busses: i2c-st: Fix copy/paste function misnaming issues
  • From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
• Re: [PATCH 14/16] i2c: busses: i2c-stm32f4: Remove incorrectly placed ' ' from function name
  • From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
• Re: [PATCH 13/16] i2c: busses: i2c-st: Fix copy/paste function misnaming issues
  • From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
• Re: i801_smbus: no runtime pm since a9c8088c7988 ("i2c: i801: Don't restore config registers on runtime PM")
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [syzbot] KASAN: out-of-bounds Read in i801_isr
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: i801_smbus: no runtime pm since a9c8088c7988 ("i2c: i801: Don't restore config registers on runtime PM")
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH v4 1/8] ACPI: scan: Extend acpi_walk_dep_device_list()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 7/8] platform/x86: Add intel_skl_int3472 driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 6/8] gpiolib: acpi: Add acpi_gpio_get_io_resource()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH i2c-tools] Revert "tools: i2ctransfer: add check for returned length from driver"
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH i2c-tools] Revert "tools: i2ctransfer: add check for returned length from driver"
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: make file missing ?
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH 03/16] i2c: busses: i2c-ali1563: File headers are not good candidates for kernel-doc
  • From: Jean Delvare <jdelvare@xxxxxxx>
• i801_smbus: no runtime pm since a9c8088c7988 ("i2c: i801: Don't restore config registers on runtime PM")
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH 07/16] i2c: busses: i2c-designware-master: Fix misnaming of 'i2c_dw_init_master()'
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• RE: [PATCH V2 11/18] dt-bindings: i2c: imx-lpi2c: Add bus recovery example
  • From: Aisheng Dong <aisheng.dong@xxxxxxx>
• Re: [PATCH 12/16] i2c: busses: i2c-rk3x: Demote unworthy headers and help more complete ones
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• RE: [PATCH V2 10/18] i2c: imx-lpi2c: add bus recovery feature
  • From: Aisheng Dong <aisheng.dong@xxxxxxx>
• RE: [PATCH V2 08/18] i2c: imx-lpi2c: add debug message when i2c peripheral clk doesn't work
  • From: Aisheng Dong <aisheng.dong@xxxxxxx>
• RE: [PATCH V2 07/18] i2c: imx-lpi2c: manage irq resource request/release in runtime pm
  • From: Aisheng Dong <aisheng.dong@xxxxxxx>
• Re: [PATCH 11/16] i2c: busses: i2c-pnx: Provide descriptions for 'alg_data' data structure
  • From: Vladimir Zapolskiy <vz@xxxxxxxxx>
• Re: [PATCH 02/16] i2c: muxes: i2c-arb-gpio-challenge: Demote non-conformant kernel-doc headers
  • From: Peter Rosin <peda@xxxxxxxxxx>
• RE: [PATCH V2 06/18] ARM64: dts: imx8: change i2c irq number to non-combined
  • From: Aisheng Dong <aisheng.dong@xxxxxxx>
• RE: [PATCH V2 05/18] ARM64: dts: imx8: add the missing lpi2c ipg clock
  • From: Aisheng Dong <aisheng.dong@xxxxxxx>
• RE: [PATCH V2 04/18] ARM: dts: imx7ulp: add the missing lpi2c nodes
  • From: Aisheng Dong <aisheng.dong@xxxxxxx>
• RE: [PATCH V2 03/18] ARM: dts: imx7ulp: add the missing lpi2c ipg clock
  • From: Aisheng Dong <aisheng.dong@xxxxxxx>
• RE: [PATCH V2 02/18] i2c: imx-lpi2c: add ipg clk for lpi2c driver
  • From: Aisheng Dong <aisheng.dong@xxxxxxx>
• RE: [PATCH v3 5/7] i2c: aspeed: Add aspeed_set_slave_busy()
  • From: Ryan Chen <ryan_chen@xxxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: aspeed: disable additional device addresses on ast2[56]xx
  • From: Joel Stanley <joel@xxxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: i2c: i2c-mt65xx: convert doc to yaml schema format
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/3] i2c: aspeed: avoid new registers definition of AST2600
  • From: Tao Ren <rentao.bupt@xxxxxxxxx>
• Re: [PATCH 12/16] i2c: busses: i2c-rk3x: Demote unworthy headers and help more complete ones
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• Re: [PATCH v4 1/8] ACPI: scan: Extend acpi_walk_dep_device_list()
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 10/16] i2c: busses: i2c-ocores: Place the expected function names into the documentation headers
  • From: Peter Korsgaard <peter@xxxxxxxxxxxxx>
• Re: [PATCH 02/16] i2c: muxes: i2c-arb-gpio-challenge: Demote non-conformant kernel-doc headers
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH 10/16] i2c: busses: i2c-ocores: Place the expected function names into the documentation headers
  • From: Andrew Lunn <andrew@xxxxxxx>
• [PATCH 16/16] i2c: busses: i2c-st: trivial: Fix spelling issue 'enmpty => empty'
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 15/16] i2c: busses: i2c-tegra-bpmp: Demote kernel-doc abuses
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 14/16] i2c: busses: i2c-stm32f4: Remove incorrectly placed ' ' from function name
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 13/16] i2c: busses: i2c-st: Fix copy/paste function misnaming issues
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 12/16] i2c: busses: i2c-rk3x: Demote unworthy headers and help more complete ones
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 11/16] i2c: busses: i2c-pnx: Provide descriptions for 'alg_data' data structure
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 10/16] i2c: busses: i2c-ocores: Place the expected function names into the documentation headers
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 06/16] i2c: busses: i2c-cadence: Fix incorrectly documented 'enum cdns_i2c_slave_mode'
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 09/16] i2c: busses: i2c-mxs: Demote barely half complete kernel-doc header
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 08/16] i2c: busses: i2c-eg20t: Fix 'bad line' issue and provide description for 'msgs' param
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 07/16] i2c: busses: i2c-designware-master: Fix misnaming of 'i2c_dw_init_master()'
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 05/16] i2c: busses: i2c-axxia: Fix formatting issue in struct and demote unworthy kernel-doc headers
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 04/16] i2c: busses: i2c-altera: Fix formatting issue in struct and demote unworthy kernel-doc headers
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 03/16] i2c: busses: i2c-ali1563: File headers are not good candidates for kernel-doc
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 02/16] i2c: muxes: i2c-arb-gpio-challenge: Demote non-conformant kernel-doc headers
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 01/16] i2c: busses: i2c-nomadik: Fix formatting issue pertaining to 'timeout'
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 00/16] Rid W=1 warnings from I2C
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v4 2/8] ACPI: scan: Add function to fetch dependent of acpi device
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH v4 2/8] ACPI: scan: Add function to fetch dependent of acpi device
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH v4 1/8] ACPI: scan: Extend acpi_walk_dep_device_list()
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH v4 1/8] ACPI: scan: Extend acpi_walk_dep_device_list()
  • From: Maximilian Luz <luzmaximilian@xxxxxxxxx>
• Re: [PATCH v3 7/7] bindings: ipmi: Add binding for Aspeed SSIF BMC driver
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 0/7] Add Aspeed SSIF BMC driver
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/7] ipmi: ssif_bmc: Add SSIF BMC driver
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 3/7] i2c: aspeed: Fix unhandled Tx done with NAK
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v4 8/8] mfd: tps68470: Remove tps68470 MFD driver
  • From: Daniel Scally <djrscally@xxxxxxxxx>
• [PATCH v4 7/8] platform/x86: Add intel_skl_int3472 driver
  • From: Daniel Scally <djrscally@xxxxxxxxx>
• [PATCH v4 4/8] gpiolib: acpi: Export acpi_get_gpiod()
  • From: Daniel Scally <djrscally@xxxxxxxxx>
• [PATCH v4 6/8] gpiolib: acpi: Add acpi_gpio_get_io_resource()
  • From: Daniel Scally <djrscally@xxxxxxxxx>
• [PATCH v4 5/8] clkdev: Make clkdev_drop() null aware
  • From: Daniel Scally <djrscally@xxxxxxxxx>
• [PATCH v4 3/8] i2c: core: Add a format macro for I2C device names
  • From: Daniel Scally <djrscally@xxxxxxxxx>
• [PATCH v4 2/8] ACPI: scan: Add function to fetch dependent of acpi device
  • From: Daniel Scally <djrscally@xxxxxxxxx>
• Re: [PATCH v3 5/7] i2c: aspeed: Add aspeed_set_slave_busy()
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v4 1/8] ACPI: scan: Extend acpi_walk_dep_device_list()
  • From: Daniel Scally <djrscally@xxxxxxxxx>
• [PATCH v4 0/8] Introduce intel_skl_int3472 module
  • From: Daniel Scally <djrscally@xxxxxxxxx>
• Re: [PATCH v3 4/7] i2c: aspeed: Acknowledge Tx done w/wo ACK irq late
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 4/7] i2c: aspeed: Acknowledge Tx done w/wo ACK irq late
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 3/7] i2c: aspeed: Fix unhandled Tx done with NAK
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 3/4] i2c: i2c-mt65xx: add MT8365 SoC support
  • From: Fabien Parent <fparent@xxxxxxxxxxxx>
• [PATCH v2 1/4] dt-bindings: i2c: i2c-mt65xx: convert doc to yaml schema format
  • From: Fabien Parent <fparent@xxxxxxxxxxxx>
• [PATCH v2 2/4] dt-bindings: i2c: i2c-mt65xx: add binding for MT8365 SoC
  • From: Fabien Parent <fparent@xxxxxxxxxxxx>
• [PATCH] i2c: i801: Use pm_runtime_forbid to prevent suspending
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• i2c: i801: Use pm_runtime_forbid to prevent suspending
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH v21 0/5] add power control in i2c
  • From: Hsin-Yi Wang <hsinyi@xxxxxxxxxxxx>
• RE: [PATCH v3 3/7] i2c: aspeed: Fix unhandled Tx done with NAK
  • From: Ryan Chen <ryan_chen@xxxxxxxxxxxxxx>
• RE: [PATCH v3 5/7] i2c: aspeed: Add aspeed_set_slave_busy()
  • From: Ryan Chen <ryan_chen@xxxxxxxxxxxxxx>
• Re: [PATCH V10] i2c: i2c-qcom-geni: Add shutdown callback for i2c
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH v3 0/4] P2040/P2041 i2c recovery erratum
  • From: Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] i2c: aspeed: avoid new registers definition of AST2600
  • From: Jamin Lin <jamin_lin@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3] dt-bindings: aspeed-i2c: Convert txt to yaml format
  • From: Jamin Lin <jamin_lin@xxxxxxxxxxxxxx>
• Re: [PATCH v3 4/7] i2c: aspeed: Acknowledge Tx done w/wo ACK irq late
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: i2c: i2c-mt65xx: add binding for MT8365 SoC
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: i2c: i2c-mt65xx: convert doc to yaml schema format
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 4/7] i2c: aspeed: Acknowledge Tx done w/wo ACK irq late
  • From: Joel Stanley <joel@xxxxxxxxx>
• Re: [PATCH v3 3/7] i2c: aspeed: Fix unhandled Tx done with NAK
  • From: Joel Stanley <joel@xxxxxxxxx>
• Re: [PATCH 1/3] i2c: aspeed: avoid new registers definition of AST2600
  • From: Joel Stanley <joel@xxxxxxxxx>
• Re: [PATCH 1/3] i2c: aspeed: avoid new registers definition of AST2600
  • From: Zev Weiss <zweiss@xxxxxxxxxxx>
• Re: [PATCH v4 4/4] i2c: aspeed: add DMA mode transfer support
  • From: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] dt-bindings: aspeed-i2c: Convert txt to yaml format
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 3/3] dt-bindings: aspeed-i2c: Convert txt to yaml format
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 7/7] bindings: ipmi: Add binding for Aspeed SSIF BMC driver
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 04/10] dt-bindings: watchdog: dw-wdt: add description for rk3568
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3 0/7] Add Aspeed SSIF BMC driver
  • From: Corey Minyard <minyard@xxxxxxx>
• Re: [PATCH v3 2/7] ipmi: ssif_bmc: Add SSIF BMC driver
  • From: Corey Minyard <minyard@xxxxxxx>
• [PATCH v2] i2c: i801: Safely share SMBus with BIOS/ACPI
  • From: Hector Martin <marcan@xxxxxxxxx>
• [PATCH] i2c: i801: Safely share SMBus with BIOS/ACPI
  • From: Hector Martin <marcan@xxxxxxxxx>
• [PATCH 3/3] dt-bindings: aspeed-i2c: Convert txt to yaml format
  • From: Jamin Lin <jamin_lin@xxxxxxxxxxxxxx>
• [PATCH 2/3] ARM: dts: aspeed: Add node for AST2600 I2C
  • From: Jamin Lin <jamin_lin@xxxxxxxxxxxxxx>
• [PATCH 1/3] i2c: aspeed: avoid new registers definition of AST2600
  • From: Jamin Lin <jamin_lin@xxxxxxxxxxxxxx>
• [PATCH 0/3] i2c: aspeed: avoid new registers definition of AST2600
  • From: Jamin Lin <jamin_lin@xxxxxxxxxxxxxx>
• [PATCH v3 7/7] bindings: ipmi: Add binding for Aspeed SSIF BMC driver
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v3 6/7] ipmi: ssif_bmc: Add Aspeed SSIF BMC driver
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v3 5/7] i2c: aspeed: Add aspeed_set_slave_busy()
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v3 4/7] i2c: aspeed: Acknowledge Tx done w/wo ACK irq late
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v3 3/7] i2c: aspeed: Fix unhandled Tx done with NAK
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v3 2/7] ipmi: ssif_bmc: Add SSIF BMC driver
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v3 1/7] i2c: i2c-core-smbus: Expose PEC calculate function for generic use
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v3 0/7] Add Aspeed SSIF BMC driver
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 3/3] i2c: i2c-mt65xx: add MT8365 SoC support
  • From: Fabien Parent <fparent@xxxxxxxxxxxx>
• [PATCH 2/3] dt-bindings: i2c: i2c-mt65xx: add binding for MT8365 SoC
  • From: Fabien Parent <fparent@xxxxxxxxxxxx>
• [PATCH 1/3] dt-bindings: i2c: i2c-mt65xx: convert doc to yaml schema format
  • From: Fabien Parent <fparent@xxxxxxxxxxxx>
• Re: [PATCH v2] Documentation: i2c: Add doc for I2C sysfs
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] i2c: qcom-cci: add sm8250 compatible
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v2] Documentation: i2c: Add doc for I2C sysfs
  • From: Alex Qiu <xqiu@xxxxxxxxxx>
• Re: [PATCH] Documentation: i2c: Add doc for I2C sysfs
  • From: Alex Qiu <xqiu@xxxxxxxxxx>
• Re: [PATCH v3 5/6] platform/x86: Add intel_skl_int3472 driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 5/6] platform/x86: Add intel_skl_int3472 driver
  • From: Daniel Scally <djrscally@xxxxxxxxx>
• Re: [PATCH v6 2/5] drm/dp: Allow an early call to register DDC i2c bus
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v6 1/5] i2c: i2c-core-of: Fix corner case of finding adapter by node
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v1 1/1] i2c: core: Propagate all possible errors when requesting recovery GPIOs
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 1/1] i2c: core: Make debug message even more debuggish
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: qcom-cci: add sm8250 compatible
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v21 3/5] i2c: mediatek: mt65xx: add optional vbus-supply
  • From: Qii Wang <qii.wang@xxxxxxxxxxxx>
• Re: [PATCH] i2c: qcom-cci: add sm8250 compatible
  • From: Loic Poulain <loic.poulain@xxxxxxxxxx>
• Re: [PATCH V10] i2c: i2c-qcom-geni: Add shutdown callback for i2c
  • From: rojay@xxxxxxxxxxxxxx
• [PATCH] i2c: core: export i2c_smbus_pec()
  • From: Matt Johnston <matt@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] Documentation: i2c: Add doc for I2C sysfs
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v6 2/5] drm/dp: Allow an early call to register DDC i2c bus
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• [PATCH 4/4] clk: stm32: Fix ltdc's clock turn off by clk_disable_unused() after kernel startup
  • From: dillon.minfei@xxxxxxxxx
• [PATCH 3/4] clk: stm32: Fix stm32f429's ltdc driver hang in set clock rate
  • From: dillon.minfei@xxxxxxxxx
• [PATCH 2/4] i2c: stm32f4: Fix stmpe811 get xyz data timeout issue
  • From: dillon.minfei@xxxxxxxxx
• [PATCH 1/4] drm/panel: Add ilitek ili9341 panel driver
  • From: dillon.minfei@xxxxxxxxx
• [PATCH 0/4] Fix the i2c/clk bug of stm32 mcu platform
  • From: dillon.minfei@xxxxxxxxx
• Re: [RESEND PATCH v4 06/10] dt-bindings: gpio: change items restriction of clock for rockchip,gpio-bank
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• [PATCH] i2c: qcom-cci: add sm8250 compatible
  • From: Jonathan Marek <jonathan@xxxxxxxx>
• Re: [PATCH v4] HID: ft260: improve error handling of ft260_hid_feature_report_get()
  • From: Tom Rix <trix@xxxxxxxxxx>
• Re: [PATCH v4] HID: ft260: improve error handling of ft260_hid_feature_report_get()
  • From: Jiri Kosina <jikos@xxxxxxxxxx>
• [RESEND PATCH v4 06/10] dt-bindings: gpio: change items restriction of clock for rockchip,gpio-bank
  • From: <cl@xxxxxxxxxxxxxx>
• [RESEND PATCH v4 06/10] dt-bindings: gpio: change items restriction of clock for rockchip,gpio-bank
  • From: <cl@xxxxxxxxxxxxxx>
• Re: [PATCH v1 1/2] dt-bindings: i2c: microchip: Add Microchip PolarFire host binding
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: brcm,iproc-i2c: convert to the json-schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH V10] i2c: i2c-qcom-geni: Add shutdown callback for i2c
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• [PATCH] dt-bindings: i2c: brcm,iproc-i2c: convert to the json-schema
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• Re: [PATCH v21 3/5] i2c: mediatek: mt65xx: add optional vbus-supply
  • From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
• Re: [PATCH v21 1/5] i2c: core: support bus regulator controlling in adapter
  • From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
• Re: [PATCH v3 0/4] P2040/P2041 i2c recovery erratum
  • From: "wsa@xxxxxxxxxx" <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: cp2615: check for allocation failure in cp2615_i2c_recv()
  • From: Bence Csókás <bence98@xxxxxxxxxx>
• Re: [PATCH 3/3] i2c: i2c-qcom-geni: Add support for 'assigned-performance-states'
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH] i2c: cp2615: check for allocation failure in cp2615_i2c_recv()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH v1 2/2] i2c: microchip: Add driver for Microchip PolarFire SoC
  • From: <daire.mcnamara@xxxxxxxxxxxxx>
• [PATCH v1 1/2] dt-bindings: i2c: microchip: Add Microchip PolarFire host binding
  • From: <daire.mcnamara@xxxxxxxxxxxxx>
• [PATCH v1 0/2] i2c: microchip: Add driver for PolarFire SoC
  • From: <daire.mcnamara@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: cp2615: check for allocation failure in cp2615_i2c_recv()
  • From: Bence Csókás <bence98@xxxxxxxxxx>
• [PATCH] i2c: cp2615: check for allocation failure in cp2615_i2c_recv()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v3 0/4] P2040/P2041 i2c recovery erratum
  • From: Joakim Tjernlund <Joakim.Tjernlund@xxxxxxxxxxxx>
• [PATCH V10] i2c: i2c-qcom-geni: Add shutdown callback for i2c
  • From: Roja Rani Yarubandi <rojay@xxxxxxxxxxxxxx>
• Re: [PATCH v3 0/4] P2040/P2041 i2c recovery erratum
  • From: Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v10] i2c: virtio: add a virtio i2c frontend driver
  • From: Jie Deng <jie.deng@xxxxxxxxx>
• [syzbot] KASAN: out-of-bounds Read in i801_isr
  • From: syzbot <syzbot+b4d3fd1dfd53e90afd79@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 0/4] P2040/P2041 i2c recovery erratum
  • From: Joakim Tjernlund <Joakim.Tjernlund@xxxxxxxxxxxx>
• [PATCH v3 4/4] i2c: mpc: implement erratum A-004447 workaround
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH v3 2/4] powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P2041 i2c controllers
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH v3 3/4] powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P1010 i2c controllers
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH v3 0/4] P2040/P2041 i2c recovery erratum
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH v3 1/4] dt-bindings: i2c: mpc: Add fsl,i2c-erratum-a004447 flag
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: i2c: mpc: Add fsl,i2c-erratum-a004447 flag
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4] HID: ft260: improve error handling of ft260_hid_feature_report_get()
  • From: Tom Rix <trix@xxxxxxxxxx>
• Re: [PATCH v4] HID: ft260: improve error handling of ft260_hid_feature_report_get()
  • From: Michael Zaidman <michael.zaidman@xxxxxxxxx>
• Re: [PATCH v4] HID: ft260: improve error handling of ft260_hid_feature_report_get()
  • From: Tom Rix <trix@xxxxxxxxxx>
• Re: [PATCH V9] i2c: i2c-qcom-geni: Add shutdown callback for i2c
  • From: rojay@xxxxxxxxxxxxxx
• Re: [PATCH v4 03/10] dt-bindings: mmc: rockchip-dw-mshc: add description for rk3568
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• [PATCH v4] HID: ft260: improve error handling of ft260_hid_feature_report_get()
  • From: Michael Zaidman <michael.zaidman@xxxxxxxxx>
• [PATCH v3] HID: ft260: improve error handling of ft260_hid_feature_report_get()
  • From: Michael Zaidman <michael.zaidman@xxxxxxxxx>
• Re: [PATCH V2 05/18] ARM64: dts: imx8: add the missing lpi2c ipg clock
  • From: Shawn Guo <shawnguo@xxxxxxxxxx>
• [PATCH v7 5/6] i2c: imx: Simplify using devm_clk_get_enabled()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v2] HID: ft260: improve error handling of ft260_hid_feature_report_get()
  • From: trix@xxxxxxxxxx
• Re: [PATCH v2] i2c: I2C_HISI should depend on ACPI
  • From: Yicong Yang <yangyicong@xxxxxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: i2c: Move i2c-omap.txt to YAML format
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• Re: [PATCH v4 2/2] i2c: stm32f7: add SMBus-Alert support
  • From: Pierre Yves MORDRET <pierre-yves.mordret@xxxxxxxxxxx>
• Re: [PATCH 3/3] i2c: i2c-qcom-geni: Add support for 'assigned-performance-states'
  • From: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
• [PATCH v6 RESEND 5/6] i2c: imx: Simplify using devm_clk_get_enabled()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/3] powerpc/fsl: set fsl, i2c-erratum-a004447 flag for P2041 i2c controllers
  • From: Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: i2c: mpc: Add fsl,i2c-erratum-a004447 flag
  • From: Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] HID: ft260: improve error handling of ft260_hid_feature_report_get()
  • From: Michael Zaidman <michael.zaidman@xxxxxxxxx>
• Re: [PATCH V9] i2c: i2c-qcom-geni: Add shutdown callback for i2c
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH v6 2/5] drm/dp: Allow an early call to register DDC i2c bus
  • From: Lyude Paul <lyude@xxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: i2c: Move i2c-omap.txt to YAML format
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v6 2/5] drm/dp: Allow an early call to register DDC i2c bus
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: i2c: mpc: Add fsl,i2c-erratum-a004447 flag
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: i2c: Move i2c-omap.txt to YAML format
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: i2c: Move i2c-omap.txt to YAML format
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v6 2/5] drm/dp: Allow an early call to register DDC i2c bus
  • From: Lyude Paul <lyude@xxxxxxxxxx>
• Re: [PATCH V9] i2c: i2c-qcom-geni: Add shutdown callback for i2c
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH v2] i2c: aspeed: disable additional device addresses on ast2[56]xx
  • From: Brendan Higgins <brendanhiggins@xxxxxxxxxx>
• [PATCH] HID: ft260: improve error handling of ft260_hid_feature_report_get()
  • From: trix@xxxxxxxxxx
• Re: [PATCH v2] dt-bindings: i2c: Move i2c-omap.txt to YAML format
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH v2 3/3] i2c: mpc: implement erratum A-004447 workaround
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 3/3] i2c: mpc: implement erratum A-004447 workaround
  • From: Joakim Tjernlund <Joakim.Tjernlund@xxxxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: i2c: Move i2c-omap.txt to YAML format
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: i2c: Move i2c-omap.txt to YAML format
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• [PATCH v21 5/5] arm64: dts: mt8183: add supply name for eeprom
  • From: Hsin-Yi Wang <hsinyi@xxxxxxxxxxxx>
• [PATCH v21 4/5] misc: eeprom: at24: check suspend status before disable regulator
  • From: Hsin-Yi Wang <hsinyi@xxxxxxxxxxxx>
• [PATCH v21 3/5] i2c: mediatek: mt65xx: add optional vbus-supply
  • From: Hsin-Yi Wang <hsinyi@xxxxxxxxxxxx>
• [PATCH v21 2/5] dt-binding: i2c: mt65xx: add vbus-supply property
  • From: Hsin-Yi Wang <hsinyi@xxxxxxxxxxxx>
• [PATCH v21 1/5] i2c: core: support bus regulator controlling in adapter
  • From: Hsin-Yi Wang <hsinyi@xxxxxxxxxxxx>
• [PATCH v21 0/5] add power control in i2c
  • From: Hsin-Yi Wang <hsinyi@xxxxxxxxxxxx>
• Re: [Linux-stm32] [PATCH v4 4/4] i2c: stm32f4: Fix stmpe811 get xyz data timeout issue
  • From: dillon min <dillon.minfei@xxxxxxxxx>
• Re: [Linux-stm32] [PATCH v4 4/4] i2c: stm32f4: Fix stmpe811 get xyz data timeout issue
  • From: Patrice CHOTARD <patrice.chotard@xxxxxxxxxxx>
• Re: [PATCH v2 3/3] i2c: mpc: implement erratum A-004447 workaround
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH V9] i2c: i2c-qcom-geni: Add shutdown callback for i2c
  • From: rojay@xxxxxxxxxxxxxx
• Re: [PATCH 3/3] i2c: i2c-qcom-geni: Add support for 'assigned-performance-states'
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH v2 2/3] powerpc/fsl: set fsl, i2c-erratum-a004447 flag for P2041 i2c controllers
  • From: Joakim Tjernlund <Joakim.Tjernlund@xxxxxxxxxxxx>
• Re: [PATCH v2 2/3] powerpc/fsl: set fsl, i2c-erratum-a004447 flag for P2041 i2c controllers
  • From: Joakim Tjernlund <Joakim.Tjernlund@xxxxxxxxxxxx>
• Re: [PATCH 5/6] dt-bindings: i2c: renesas,riic: Convert to json-schema
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: i2c: Move i2c-omap.txt to YAML format
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH v4 4/4] i2c: stm32f4: Fix stmpe811 get xyz data timeout issue
  • From: dillon min <dillon.minfei@xxxxxxxxx>
• Re: [PATCH v4 1/2] i2c: add binding to mark a bus as supporting SMBus-Alert
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v2 0/3] P2040/P2041 i2c recovery erratum
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 3/3] i2c: mpc: implement erratum A-004447 workaround
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 2/3] powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P2041 i2c controllers
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 1/3] dt-bindings: i2c: mpc: Add fsl,i2c-erratum-a004447 flag
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: mux: pca954x: Support multiple devices on a single reset line
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v2] i2c: aspeed: disable additional device addresses on ast2[56]xx
  • From: Zev Weiss <zev@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 6/6] dt-bindings: i2c: renesas,iic-emev2: Convert to json-schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 5/6] dt-bindings: i2c: renesas,riic: Convert to json-schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH/RFC 4/6] dt-bindings: i2c: renesas,iic: Convert to json-schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 3/6] dt-bindings: i2c: renesas,i2c: Convert to json-schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/6] dt-bindings: i2c: renesas,i2c: Drop "renesas,i2c-rcar"
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: i2c: Move i2c-omap.txt to YAML format
  • From: Nishanth Menon <nm@xxxxxx>
• RE: [PATCH] i2c: sh_mobile: Use new clock calculation formulas for RZ/G2E
  • From: Fabrizio Castro <fabrizio.castro.jz@xxxxxxxxxxx>
• [PATCH v2] dt-bindings: i2c: Move i2c-omap.txt to YAML format
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• [PATCH] i2c: sh_mobile: Use new clock calculation formulas for RZ/G2E
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 3/3] i2c: mpc: implement erratum A-004447 workaround
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH 2/3] powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P2041 i2c controllers
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH 0/3] P2040/P2041 i2c recovery erratum
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH 1/3] dt-bindings: i2c: mpc: Add fsl,i2c-erratum-a004447 flag
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH] i2c: mux: pca954x: Support multiple devices on a single reset line
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: Move i2c-omap.txt to YAML format
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: Move i2c-omap.txt to YAML format
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• [PATCH AUTOSEL 4.19 05/32] i2c: bail out early when RDWR parameters are wrong
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 16/32] i2c: Add I2C_AQ_NO_REP_START adapter quirk
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 18/46] i2c: Add I2C_AQ_NO_REP_START adapter quirk
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 06/46] i2c: bail out early when RDWR parameters are wrong
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 34/85] i2c: Add I2C_AQ_NO_REP_START adapter quirk
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 13/85] i2c: bail out early when RDWR parameters are wrong
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.11 058/104] i2c: imx: Fix PM reference leak in i2c_imx_reg_slave()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.11 041/104] i2c: Add I2C_AQ_NO_REP_START adapter quirk
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.11 018/104] i2c: bail out early when RDWR parameters are wrong
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.12 083/116] i2c: i801: Add support for Intel Alder Lake PCH-M
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.12 065/116] i2c: imx: Fix PM reference leak in i2c_imx_reg_slave()
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.12 044/116] i2c: Add I2C_AQ_NO_REP_START adapter quirk
  • From: Sasha Levin <sashal@xxxxxxxxxx>