[PATCH v2 2/4] dt-bindings: add bus number property

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On SoCFPGA systems, it's desireable to have fixed numbering for
i2c busses, while being able to enable/disable them (e.g. have i2c1
be mapped to /dev/i2c-1, even though i2c0 is disabled). This can also
be achieved using devicetree aliases (see i2c_add_adapter). However,
having the driver be self-contained without relying on aliases is more
robust.

Signed-off-by: Paweł Anikiel <pan@xxxxxxxxxxxx>
---
 .../devicetree/bindings/i2c/snps,designware-i2c.yaml         | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml b/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml
index d9293c57f573..1e02ddcbd690 100644
--- a/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml
@@ -93,6 +93,11 @@ properties:
       - const: tx
       - const: rx
 
+  busno:
+    description: |
+      The property should contain the desired bus number (as opposed to
+      being assigned automatically)
+
 unevaluatedProperties: false
 
 required:
-- 
2.25.1




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux