Linux Kernel I2C

• Thread Index

• [PATCH 3/6] i2c: designware-pci: Add a note about struct dw_scl_sda_cfg usage
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• [PATCH 2/6] i2c: designware-pci: Fix to change data types of hcnt and lcnt parameters
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• [PATCH 1/6] i2c: designware: Do not complete i2c read without RX_FULL interrupt
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 4/6] i2c: designware-pci: Fix to change data types of hcnt and lcnt parameters
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: i2c Update PCA954x
  • From: Patrick Rudolph <patrick.rudolph@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/6] i2c: designware-pci: Use temporary variable for struct device
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/6] i2c: designware-pci: Use temporary variable for struct device
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 4/6] i2c: designware-pci: Fix to change data types of hcnt and lcnt parameters
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 01/11] i2c: Introduce common module to instantiate CCGx UCSI
  • From: "Shah, Nehal-bakulchandra" <nehal-bakulchandra.shah@xxxxxxx>
• Re: [PATCH v2 1/6] i2c: designware-pci: Use temporary variable for struct device
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: i2c Update PCA954x
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v3] i2c: designware: Do not complete i2c read without RX_FULL interrupt
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• [PATCH] Fix typo, add markup, fix URL in i2c-piix4 docs
  • From: Bruce Duncan <bwduncan@xxxxxxxxx>
• Re: [PATCH v2 4/6] i2c: designware-pci: Fix to change data types of hcnt and lcnt parameters
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/6] i2c: designware-pci: Use temporary variable for struct device
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 0/2] Add Microchip EEPROM 24xx1025 support.
  • From: Maxim Kochetkov <fido_max@xxxxxxxx>
• [PATCH v3] i2c: designware: Do not complete i2c read without RX_FULL interrupt
  • From: tamal.saha@xxxxxxxxx
• Re: [PATCH 4/4] i2c-mux-pca954x: Add regulator support
  • From: kernel test robot <lkp@xxxxxxxxx>
• RE: [PATCH v2] i2c: designware: Do not complete i2c read without RX_FULL interrupt
  • From: "Saha, Tamal" <tamal.saha@xxxxxxxxx>
• Re: [PATCH v2] i2c: designware: Do not complete i2c read without RX_FULL interrupt
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: designware: Do not complete i2c read without RX_FULL interrupt
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/4] dt-bindings: i2c Add regulator to pca954x
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: i2c Update PCA954x
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH 4/4] i2c-mux-pca954x: Add regulator support
  • From: Patrick Rudolph <patrick.rudolph@xxxxxxxxxxxxx>
• [PATCH 3/4] dt-bindings: i2c Add regulator to pca954x
  • From: Patrick Rudolph <patrick.rudolph@xxxxxxxxxxxxx>
• [PATCH 2/4] drivers/i2c/mux: Add MAX735x support to PCA954x
  • From: Patrick Rudolph <patrick.rudolph@xxxxxxxxxxxxx>
• [PATCH 1/4] dt-bindings: i2c Update PCA954x
  • From: Patrick Rudolph <patrick.rudolph@xxxxxxxxxxxxx>
• [PATCH v2] i2c: designware: Do not complete i2c read without RX_FULL interrupt
  • From: tamal.saha@xxxxxxxxx
• RE: [PATCH v1] i2c: designware: Do not complete i2c read without RX_FULL interrupt
  • From: "Saha, Tamal" <tamal.saha@xxxxxxxxx>
• Re: [PATCH] i2c: aspeed: Remove unused includes
  • From: Joel Stanley <joel@xxxxxxxxx>
• [PATCH] i2c: i801: enable FEATURE_IRQ and FEATURE_I2C_BLOCK_READ on all chip versions
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH v1 01/11] i2c: Introduce common module to instantiate CCGx UCSI
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 5/6] i2c: designware-pci: Group MODULE_*() macros
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 6/6] i2c: designware-pci: Add a note about struct dw_scl_sda_cfg usage
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 1/6] i2c: designware-pci: Use temporary variable for struct device
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 4/6] i2c: designware-pci: Fix to change data types of hcnt and lcnt parameters
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 2/6] i2c: designware-pci: Convert to use dev_err_probe()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 3/6] i2c: designware-pci: use __maybe_unused for PM functions
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: piix4: Replace piix4_smbus driver's cd6h/cd7h port io accesses with mmio accesses
  • From: Terry Bowman <Terry.Bowman@xxxxxxx>
• Re: [PATCH v3 0/2] Add Microchip EEPROM 24xx1025 support.
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v1] i2c: designware: Do not complete i2c read without RX_FULL interrupt
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• RE: [PATCH] i2c: exynos5: Fix getting the optional clock
  • From: "Chanho Park" <chanho61.park@xxxxxxxxxxx>
• Re: [PATCH] i2c: exynos5: Fix getting the optional clock
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• [PATCH] i2c: exynos5: Fix getting the optional clock
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• Re: [bisected][regression] Applications that need amdgpu doesn't run after waking up from suspend
  • From: Thorsten Leemhuis <regressions@xxxxxxxxxxxxx>
• Re: i801: I2C block read should be usable also on ICH/ICH0/ICH2/ICH3/ICH4
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH 2/2] i2c: tegra: Add SMBus block read and SMBus alert functions
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH 2/2] i2c: tegra: Add SMBus block read and SMBus alert functions
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PULL REQUEST] i2c for v5.16
  • From: pr-tracker-bot@xxxxxxxxxx
• Re: [PATCH v3] i2c: tegra: use i2c_timings for bus clock freq
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Wrong piix4_smbus address / slow trackpoint on Thinkpad P14s gen 2 (AMD)
  • From: Miroslav Bendik <miroslav.bendik@xxxxxxxxx>
• [PULL REQUEST] i2c for v5.16
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• [PATCH v1] i2c: designware: Do not complete i2c read without RX_FULL interrupt
  • From: tamal.saha@xxxxxxxxx
• Re: [PATCH v3] i2c: tegra: use i2c_timings for bus clock freq
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v3] i2c: tegra: use i2c_timings for bus clock freq
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v3 2/2] dt-bindings: at24: add at24c1025
  • From: Maxim Kochetkov <fido_max@xxxxxxxx>
• [PATCH v3 1/2] eeprom: at24: Add support for 24c1025 EEPROM
  • From: Maxim Kochetkov <fido_max@xxxxxxxx>
• [PATCH v3 0/2] Add Microchip EEPROM 24xx1025 support.
  • From: Maxim Kochetkov <fido_max@xxxxxxxx>
• Re: [PATCH v3] i2c: tegra: use i2c_timings for bus clock freq
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH] dt-bindings: at24: Rework special case compatible handling
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v2] eeprom: at24: Add support for 24c1025 EEPROM
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v3] i2c: tegra: use i2c_timings for bus clock freq
  • From: Akhil R <akhilrajeev@xxxxxxxxxx>
• RE: [PATCH 2/2] i2c: tegra: Add SMBus block read and SMBus alert functions
  • From: Akhil R <akhilrajeev@xxxxxxxxxx>
• Re: [PATCH 0/2] Add SMBus features to Tegra I2C
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v2] i2c: tegra: use i2c_timings for bus clock freq
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• RE: [PATCH v2] i2c: tegra: use i2c_timings for bus clock freq
  • From: Akhil R <akhilrajeev@xxxxxxxxxx>
• Re: [PATCH] drivers/i2c/busses/i2c-imx.c: Use with resource management to register interrupts
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] drivers/i2c/busses/i2c-imx.c: Use with resource management to register interrupts
  • From: lizhe <sensor1010@xxxxxxx>
• Re: [PATCH v2] i2c: tegra: use i2c_timings for bus clock freq
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [bisected][regression] Applications that need amdgpu doesn't run after waking up from suspend
  • From: "wsa@xxxxxxxxxx" <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: mpc: Use atomic read and fix break condition
  • From: Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 RESEND 6/8] i2c: exynos5: Mention Exynos850 and ExynosAutoV9 in Kconfig
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 RESEND 7/8] arm: dts: exynos: Rename hsi2c nodes to i2c for Exynos5260
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 RESEND 7/8] arm: dts: exynos: Rename hsi2c nodes to i2c for Exynos5260
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• [PATCH v2] i2c: tegra: use i2c_timings for bus clock freq
  • From: Akhil R <akhilrajeev@xxxxxxxxxx>
• Re: [PATCH 0/2] Add SMBus features to Tegra I2C
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH 2/2] i2c: tegra: Add SMBus block read and SMBus alert functions
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH 2/2] i2c: tegra: Add SMBus block read and SMBus alert functions
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH 2/2] i2c: tegra: Add SMBus block read and SMBus alert functions
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: i2c: tegra: Add SMBus feature properties
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 2/2] i2c: tegra: Add SMBus block read and SMBus alert functions
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH] i2c: tegra: use i2c_timings for bus clock freq
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 2/2] i2c: tegra: Add SMBus block read and SMBus alert functions
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH v2 RESEND 7/8] arm: dts: exynos: Rename hsi2c nodes to i2c for Exynos5260
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• [PATCH 2/2] i2c: tegra: Add SMBus block read and SMBus alert functions
  • From: Akhil R <akhilrajeev@xxxxxxxxxx>
• [PATCH 1/2] dt-bindings: i2c: tegra: Add SMBus feature properties
  • From: Akhil R <akhilrajeev@xxxxxxxxxx>
• [PATCH 0/2] Add SMBus features to Tegra I2C
  • From: Akhil R <akhilrajeev@xxxxxxxxxx>
• Re: [PATCH v3] i2c: i801: Don't clear status flags twice in interrupt mode
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: i801: Don't read back cleared status in i801_check_pre()
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v3] i2c: exynos5: Add bus clock support
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 RESEND 7/8] arm: dts: exynos: Rename hsi2c nodes to i2c for Exynos5260
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 RESEND 6/8] i2c: exynos5: Mention Exynos850 and ExynosAutoV9 in Kconfig
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 RESEND 5/8] i2c: exynos5: Add bus clock support
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• [PATCH v3] i2c: exynos5: Add bus clock support
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• [PATCH] i2c: tegra: use i2c_timings for bus clock freq
  • From: Akhil R <akhilrajeev@xxxxxxxxxx>
• Re: [PATCH v2 RESEND 6/8] i2c: exynos5: Mention Exynos850 and ExynosAutoV9 in Kconfig
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• Re: [PATCH v3] i2c: i801: Don't clear status flags twice in interrupt mode
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH] i2c: i801: Don't read back cleared status in i801_check_pre()
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v1 1/1] i2c: core: Do not dereference fwnode in struct device
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: mpc: Use atomic read and fix break condition
  • From: "wsa@xxxxxxxxxx" <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: i801: Don't read back cleared status in i801_check_pre()
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 RESEND 5/8] i2c: exynos5: Add bus clock support
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 RESEND 4/8] i2c: exynos5: Add support for ExynosAutoV9 SoC
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 RESEND 3/8] dt-bindings: i2c: exynos5: Add bus clock
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 RESEND 2/8] dt-bindings: i2c: exynos5: Add exynosautov9-hsi2c compatible
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 RESEND 1/8] dt-bindings: i2c: exynos5: Convert to dtschema
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: brcm,bcm2835-i2c: convert to YAML schema
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v3] i2c: virtio: fix completion handling
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v1 1/1] i2c: core: Do not dereference fwnode in struct device
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3] i2c: virtio: fix completion handling
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v3] i2c: virtio: fix completion handling
  • From: "Michael S. Tsirkin" <mst@xxxxxxxxxx>
• Re: [PATCH v1 3/7] PCI: New Primary to Sideband (P2SB) bridge support library
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [syzbot] WARNING in __i2c_transfer (2)
  • From: syzbot <syzbot+e417648b303855b91d8a@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1 03/11] i2c: designware-pci: Use temporary variable for struct device
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 05/11] i2c: designware-pci: use __maybe_unused for PM functions
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 07/11] i2c: designware-pci: Group MODULE_*() macros
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 08/11] i2c: designware-pci: Add a note about struct dw_scl_sda_cfg usage
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 06/11] i2c: designware-pci: Fix to change data types of hcnt and lcnt parameters
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 01/11] i2c: Introduce common module to instantiate CCGx UCSI
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 04/11] i2c: designware-pci: Convert to use dev_err_probe()
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• [PATCH] dt-bindings: at24: Rework special case compatible handling
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 2/2] i2c: sh_mobile: update to new DMAENGINE API when terminating
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 1/2] i2c: rcar: update to new DMAENGINE API when terminating
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: mpc: Use atomic read and fix break condition
  • From: Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx>
• Re: [syzbot] WARNING in __i2c_transfer (2)
  • From: syzbot <syzbot+e417648b303855b91d8a@xxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v1 08/11] i2c: designware-pci: Add a note about struct dw_scl_sda_cfg usage
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 07/11] i2c: designware-pci: Group MODULE_*() macros
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 06/11] i2c: designware-pci: Fix to change data types of hcnt and lcnt parameters
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 05/11] i2c: designware-pci: use __maybe_unused for PM functions
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 02/11] i2c: designware-pci: Switch to use i2c_new_ccgx_ucsi()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 09/11] i2c: nvidia-gpu: Switch to use i2c_new_ccgx_ucsi()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 11/11] i2c: nvidia-gpu: Convert to use dev_err_probe()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 10/11] i2c: nvidia-gpu: Use temporary variable for struct device
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 04/11] i2c: designware-pci: Convert to use dev_err_probe()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 01/11] i2c: Introduce common module to instantiate CCGx UCSI
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 03/11] i2c: designware-pci: Use temporary variable for struct device
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 1/1] i2c: designware: Add a note about struct dw_scl_sda_cfg usage
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 1/1] i2c: core: Do not dereference fwnode in struct device
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [RFC Patch v2 0/3] I2C statistics as sysfs attributes
  • From: Sui Chen <suichen@xxxxxxxxxx>
• [PATCH] i2c: aspeed: Remove unused includes
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH] i2c: i801: Don't read back cleared status in i801_check_pre()
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH] i2c: mpc: Use atomic read and fix break condition
  • From: Maxime Bizon <mbizon@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: aspeed: Drop stray '#interrupt-cells'
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: brcm,bcm2835-i2c: convert to YAML schema
  • From: David Heidelberg <david@xxxxxxx>
• Re: [PATCH v2] eeprom: at24: Add support for 24c1025 EEPROM
  • From: Maxim Kochetkov <fido_max@xxxxxxxx>
• [PATCH] i2c: mpc: Use atomic read and fix break condition
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: brcm,bcm2835-i2c: convert to YAML schema
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• [PATCH AUTOSEL 4.9 3/5] i2c: rk3x: Handle a spurious start completion interrupt flag
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 2/3] i2c: rk3x: Handle a spurious start completion interrupt flag
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 4/6] i2c: rk3x: Handle a spurious start completion interrupt flag
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 5/7] i2c: rk3x: Handle a spurious start completion interrupt flag
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• i801: I2C block read should be usable also on ICH/ICH0/ICH2/ICH3/ICH4
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH AUTOSEL 5.4 06/10] i2c: rk3x: Handle a spurious start completion interrupt flag
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 11/15] i2c: rk3x: Handle a spurious start completion interrupt flag
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 15/24] i2c: rk3x: Handle a spurious start completion interrupt flag
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH v2 RESEND 2/8] dt-bindings: i2c: exynos5: Add exynosautov9-hsi2c compatible
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: powerpc64-linux-ld: drivers/i2c/busses/i2c-pasemi-core.o:undefined reference to `__this_module'
  • From: "Sven Peter" <sven@xxxxxxxxxxxxx>
• Re: powerpc64-linux-ld: drivers/i2c/busses/i2c-pasemi-core.o:undefined reference to `__this_module'
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH] dt-bindings: i2c: brcm,bcm2835-i2c: convert to YAML schema
  • From: David Heidelberg <david@xxxxxxx>
• [PATCH] dt-bindings: i2c: aspeed: Drop stray '#interrupt-cells'
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: powerpc64-linux-ld: drivers/i2c/busses/i2c-pasemi-core.o:undefined reference to `__this_module'
  • From: "Sven Peter" <sven@xxxxxxxxxxxxx>
• Re: (subset) [PATCH v2 RESEND 8/8] arm64: dts: exynos: Rename hsi2c nodes to i2c for Exynos5433 and Exynos7
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: (subset) [PATCH v2 RESEND 7/8] arm: dts: exynos: Rename hsi2c nodes to i2c for Exynos5260
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH v2 RESEND 3/8] dt-bindings: i2c: exynos5: Add bus clock
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH V6 7/7] arm64: dts: imx8ulp: Add the basic dts for imx8ulp evk board
  • From: Shawn Guo <shawnguo@xxxxxxxxxx>
• Re: [PATCH V6 6/7] arm64: dts: imx8ulp: Add the basic dtsi file for imx8ulp
  • From: Shawn Guo <shawnguo@xxxxxxxxxx>
• Re: [PATCH V6 5/7] dt-bindings: arm: fsl: Add binding for imx8ulp evk
  • From: Shawn Guo <shawnguo@xxxxxxxxxx>
• Re: [PATCH V6 6/7] arm64: dts: imx8ulp: Add the basic dtsi file for imx8ulp
  • From: Shawn Guo <shawnguo@xxxxxxxxxx>
• RE: [PATCH V6 6/7] arm64: dts: imx8ulp: Add the basic dtsi file for imx8ulp
  • From: Peng Fan <peng.fan@xxxxxxx>
• Re: [PATCH V6 6/7] arm64: dts: imx8ulp: Add the basic dtsi file for imx8ulp
  • From: Shawn Guo <shawnguo@xxxxxxxxxx>
• [PATCH] i2c: Fix syntax errors in comments
  • From: Xiang wangx <wangxiang@xxxxxxxxxx>
• [PATCH] i2c: i801: make FEATURE_BLOCK_PROC dependent on FEATURE_BLOCK_BUFFER
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH] i2c: i801: make FEATURE_HOST_NOTIFY dependent on FEATURE_IRQ
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH] i2c: i801: improve interrupt handler
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH v2 RESEND 3/8] dt-bindings: i2c: exynos5: Add bus clock
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• [PATCH v2 RESEND 8/8] arm64: dts: exynos: Rename hsi2c nodes to i2c for Exynos5433 and Exynos7
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• [PATCH v2 RESEND 4/8] i2c: exynos5: Add support for ExynosAutoV9 SoC
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• [PATCH v2 RESEND 7/8] arm: dts: exynos: Rename hsi2c nodes to i2c for Exynos5260
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• [PATCH v2 RESEND 6/8] i2c: exynos5: Mention Exynos850 and ExynosAutoV9 in Kconfig
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• [PATCH v2 RESEND 5/8] i2c: exynos5: Add bus clock support
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• [PATCH v2 RESEND 2/8] dt-bindings: i2c: exynos5: Add exynosautov9-hsi2c compatible
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• [PATCH v2 RESEND 1/8] dt-bindings: i2c: exynos5: Convert to dtschema
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• [PATCH v2 RESEND 0/8] i2c: exynos5: Add support for modern Exynos SoCs
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• Re: From a5f512cb01e48f5bfcdef800dd477c8b04a4cacf Mon Sep 17 00:00:00 2001
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• [PATCH v2 7/8] arm: dts: exynos: Rename hsi2c nodes to i2c for Exynos5260
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• [PATCH v2 5/8] i2c: exynos5: Add bus clock support
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• [PATCH v2 8/8] arm64: dts: exynos: Rename hsi2c nodes to i2c for Exynos5433 and Exynos7
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• [PATCH v2 6/8] i2c: exynos5: Mention Exynos850 and ExynosAutoV9 in Kconfig
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• [PATCH v2 4/8] i2c: exynos5: Add support for ExynosAutoV9 SoC
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• [PATCH v2 3/8] dt-bindings: i2c: exynos5: Add bus clock
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• [PATCH v2 2/8] dt-bindings: i2c: exynos5: Add exynosautov9-hsi2c compatible
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• [PATCH v2 1/8] dt-bindings: i2c: exynos5: Convert to dtschema
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• From a5f512cb01e48f5bfcdef800dd477c8b04a4cacf Mon Sep 17 00:00:00 2001
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• [PATCH v3] i2c: i801: Don't clear status flags twice in interrupt mode
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH v2] eeprom: at24: Add support for 24c1025 EEPROM
  • From: Maxim Kochetkov <fido_max@xxxxxxxx>
• [PATCH v2] i2c: i801: Don't clear status flags twice in interrupt mode
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH] i2c: i801: Don't read back cleared status in i801_check_pre()
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PULL REQUEST] i2c for v5.16
  • From: pr-tracker-bot@xxxxxxxxxx
• [PATCH v1 1/1] i2c: designware: Add a note about struct dw_scl_sda_cfg usage
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PULL REQUEST] i2c for v5.16
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [RFC Patch v2 0/3] I2C statistics as sysfs attributes
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: i801: Don't clear status flags twice in interrupt mode
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH] i2c: i801: Don't read back cleared status in i801_check_pre()
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH] eeprom: at24: Add support for 24c1025 EEPROM
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH] i2c: i801: Don't clear status flags twice in interrupt mode
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v6 07/15] platform/x86: int3472: Enable I2c daisy chain
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH] i2c: i801: Don't read back cleared status in i801_check_pre()
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH AUTOSEL 5.15 35/68] i2c: i801: Fix interrupt storm from SMB_ALERT signal
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [RFC Patch v2 1/3] i2c debug counters as sysfs attributes
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [RFC Patch v2 1/3] i2c debug counters as sysfs attributes
  • From: Sui Chen <suichen@xxxxxxxxxx>
• Re: [PATCH v3] i2c: virtio: fix completion handling
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [RFC Patch v2 1/3] i2c debug counters as sysfs attributes
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [RFC Patch v2 3/3] add npcm7xx debug counters as sysfs attributes
  • From: Sui Chen <suichen@xxxxxxxxxx>
• [RFC Patch v2 2/3] i2c: npcm7xx: add tx_complete counter
  • From: Sui Chen <suichen@xxxxxxxxxx>
• [RFC Patch v2 1/3] i2c debug counters as sysfs attributes
  • From: Sui Chen <suichen@xxxxxxxxxx>
• [RFC Patch v2 0/3] I2C statistics as sysfs attributes
  • From: Sui Chen <suichen@xxxxxxxxxx>
• pca954x devices sharing reset-gpios
  • From: Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] i2c: virtio: fix completion handling
  • From: Vincent Whitchurch <vincent.whitchurch@xxxxxxxx>
• [PATCH v3] i2c: virtio: fix completion handling
  • From: Vincent Whitchurch <vincent.whitchurch@xxxxxxxx>
• RE: [PATCH 5/6] i2c: exynos5: Add bus clock support
  • From: "Chanho Park" <chanho61.park@xxxxxxxxxxx>
• [PATCH] i2c: i801: Don't clear status flags twice in interrupt mode
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH] i2c: i801: Don't read back cleared status in i801_check_pre()
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• RE: [PATCH 6/6] i2c: exynos5: Mention Exynos850 and ExynosAutoV9 in Kconfig
  • From: "Chanho Park" <chanho61.park@xxxxxxxxxxx>
• Re: [PATCH 6/6] i2c: exynos5: Mention Exynos850 and ExynosAutoV9 in Kconfig
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH 4/6] i2c: exynos5: Add support for ExynosAutoV9 SoC
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH 5/6] i2c: exynos5: Add bus clock support
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH 3/6] dt-bindings: i2c: exynos5: Add bus clock
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH 2/6] dt-bindings: i2c: exynos5: Add exynosautov9-hsi2c compatible
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH 1/6] dt-bindings: i2c: exynos5: Convert to dtschema
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH] eeprom: at24: Add support for 24c1025 EEPROM
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• [PATCH 4/6] i2c: exynos5: Add support for ExynosAutoV9 SoC
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• [PATCH 5/6] i2c: exynos5: Add bus clock support
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• [PATCH 6/6] i2c: exynos5: Mention Exynos850 and ExynosAutoV9 in Kconfig
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• [PATCH 3/6] dt-bindings: i2c: exynos5: Add bus clock
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• [PATCH 2/6] dt-bindings: i2c: exynos5: Add exynosautov9-hsi2c compatible
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• [PATCH 1/6] dt-bindings: i2c: exynos5: Convert to dtschema
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• [PATCH 0/6] i2c: exynos5: Add support for modern Exynos SoCs
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• Re: [PATCH 0/2] i2c: stm32: A few cleanups
  • From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
• Re: [PATCH] eeprom: at24: remove struct at24_client
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 2/2] i2c: stm32f7: remove noisy and imprecise log messages
  • From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
• [PATCH 1/2] i2c: stm32: get rid of stm32f7_i2c_release_bus return value
  • From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
• [PATCH 0/2] i2c: stm32: A few cleanups
  • From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
• Re: [PATCH v1 1/2] i2c: designware-pci: Add support for Fast Mode Plus and High Speed Mode
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: stm32f7: remove noisy and imprecise log messages
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: stm32f7: remove noisy and imprecise log messages
  • From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
• RE: [PATCH v1 1/2] i2c: designware-pci: Add support for Fast Mode Plus and High Speed Mode
  • From: "D, Lakshmi Sowjanya" <lakshmi.sowjanya.d@xxxxxxxxx>
• Re: [PATCH v1 1/2] i2c: designware-pci: Add support for Fast Mode Plus and High Speed Mode
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v1 1/2] i2c: designware-pci: Add support for Fast Mode Plus and High Speed Mode
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• RE: [PATCH v1 1/2] i2c: designware-pci: Add support for Fast Mode Plus and High Speed Mode
  • From: "D, Lakshmi Sowjanya" <lakshmi.sowjanya.d@xxxxxxxxx>
• Re: [PATCH] i2c: stm32f7: remove noisy and imprecise log messages
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [RESEND PATCH] i2c: rk3x: Handle a spurious start completion interrupt flag
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [RESEND PATCH] i2c: rk3x: Handle a spurious start completion interrupt flag
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v1 2/2] i2c: designware-pci: Set ideal timing parameters for Elkhart Lake PSE
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 2/3] dt-bindings: i2c: apple,i2c: allow multiple compatibles
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] i2c: stm32f7: remove noisy and imprecise log messages
  • From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
• Re: [RESEND PATCH] i2c: rk3x: Handle a spurious start completion interrupt flag
  • From: Ondřej Jirman <megous@xxxxxxxxxx>
• Re: [PATCH v1 2/2] i2c: designware-pci: Set ideal timing parameters for Elkhart Lake PSE
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• [PATCH AUTOSEL 4.14 07/14] i2c: i801: Fix interrupt storm from SMB_ALERT signal
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 10/17] i2c: i801: Fix interrupt storm from SMB_ALERT signal
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 12/25] i2c: i801: Fix interrupt storm from SMB_ALERT signal
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 23/43] i2c: i801: Fix interrupt storm from SMB_ALERT signal
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 35/68] i2c: i801: Fix interrupt storm from SMB_ALERT signal
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 23/68] HID: ft260: fix i2c probing for hwmon devices
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH v5 1/3] i2c: aspeed: Add slave_enable() to toggle slave mode
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• [PATCH] i2c: stm32f7: remove noisy and imprecise log messages
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 4/4] i2c: stm32f7: use proper DMAENGINE API for termination
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 3/4] i2c: stm32f7: stop dma transfer in case of NACK
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 2/4] i2c: stm32f7: recover the bus on access timeout
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 2/4] i2c: stm32f7: recover the bus on access timeout
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v3] i2c: i801: Safely share SMBus with BIOS/ACPI
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v1 2/2] i2c: designware-pci: Set ideal timing parameters for Elkhart Lake PSE
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH 2/4] i2c: stm32f7: recover the bus on access timeout
  • From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
• Re: [PATCH 03/13] dt-bindings: soc/microchip: update sys ctrlr compat string
  • From: <Conor.Dooley@xxxxxxxxxxxxx>
• Re: [PATCH 02/13] dt-bindings: interrupt-controller: add defines for mpfs-plic
  • From: <Conor.Dooley@xxxxxxxxxxxxx>
• Re: [PATCH v1 1/2] i2c: designware-pci: Add support for Fast Mode Plus and High Speed Mode
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 1/3] i2c: aspeed: Add slave_enable() to toggle slave mode
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/8] soc: samsung: Add USIv2 driver
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• Re: [PATCH v1 3/7] PCI: New Primary to Sideband (P2SB) bridge support library
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v7 4/4] i2c: thunderx: Use pcim_alloc_irq_vectors() to allocate IRQ vectors
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 5/8] tty: serial: samsung: Enable console as module
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• Re: [PATCH v2 0/2] i2c: aspeed: Late ack Tx done irqs and fix unhandled Tx done with NAK
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 0/8] soc: samsung: Add USIv2 driver
  • From: David Virag <virag.david003@xxxxxxxxx>
• Re: [PATCH v7 3/4] i2c: designware: Use pcim_alloc_irq_vectors() to allocate IRQ vectors
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 5/8] tty: serial: samsung: Enable console as module
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• Re: [PATCH v3 1/3] dt-bindings: i2c: qcom,i2c-qup: Convert txt to YAML schema
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 9/9] i2c: i801: Improve handling platform data for tco device
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH v3] i2c: i801: Improve handling platform data for tco device
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [RFC Patch 0/2] I2C statistics as sysfs attributes
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 2/2] devicetree bindings I2C Add bindings doc for Sunplus SP7021
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v1 2/2] i2c: designware-pci: Set ideal timing parameters for Elkhart Lake PSE
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v1 2/2] i2c: designware-pci: Set ideal timing parameters for Elkhart Lake PSE
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v1 1/2] i2c: designware-pci: Add support for Fast Mode Plus and High Speed Mode
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 2/3] i2c: enable async suspend/resume for i2c adapters
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 3/3] i2c: enable async suspend/resume on i2c client devices
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 06/13] dt-bindings: rng: add bindings for microchip mpfs rng
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 03/13] dt-bindings: soc/microchip: update sys ctrlr compat string
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 01/13] dt-bindings: interrupt-controller: create a header for RISC-V interrupts
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 02/13] dt-bindings: interrupt-controller: add defines for mpfs-plic
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH net-next v3 0/6] MCTP I2C driver
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: designware: Get HCNT/LCNT values from dts
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v5 1/3] i2c: aspeed: Add slave_enable() to toggle slave mode
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v6 05/15] regulator: Introduce tps68470-regulator driver
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3] i2c: bcm-iproc: Add i2c recovery support
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 0/8] soc: samsung: Add USIv2 driver
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] i2c: designware: Enable async suspend / resume of designware devices
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 0/3] i2c: Enable asynchronous suspend/resume
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 0/8] soc: samsung: Add USIv2 driver
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• Re: [PATCH 3/3] i2c: stm32f7: prevent calling slave handling if no slave running
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 2/4] i2c: stm32f7: recover the bus on access timeout
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v6 05/15] regulator: Introduce tps68470-regulator driver
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 2/4] i2c: stm32f7: recover the bus on access timeout
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v7 6/7] i2c: mediatek: Isolate speed setting via dts for special devices
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 2/4] i2c: stm32f7: recover the bus on access timeout
  • From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
• Re: [PATCH 3/3] i2c: stm32f7: prevent calling slave handling if no slave running
  • From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
• Re: [PATCH 1/4] i2c: stm32f7: flush TX FIFO upon transfer errors
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2] i2c: cadence: Add standard bus recovery support
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCHv2] i2c-mpc: Correct I2C reset procedure
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: rk3x: disable and reenable I2C after timeouts to fix stuck low SDA
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 3/3] i2c: at91: add advanced digital filtering support for SAMA5D4
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 0/2] i2c: at91: Add support for programmable clock source
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 1/3] i2c: at91: move i2c_recover_bus() outside of at91_do_twi_transfer()
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH V6 3/7] dt-bindings: timer: tpm-timer: Add imx8ulp compatible string
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: [PATCH] i2c: rk3x: enable clock before getting rate
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [RESEND PATCH] i2c: rk3x: Handle a spurious start completion interrupt flag
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v1 1/1] i2c: designware: Fix the kernel doc description for struct dw_i2c_dev
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v3] i2c: i801: Safely share SMBus with BIOS/ACPI
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2] i2c: i801: Improve handling of chip-specific feature definitions
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 0/8] soc: samsung: Add USIv2 driver
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• [PATCH v2] i2c: cadence: Add standard bus recovery support
  • From: Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxxxxx>
• Re: [PATCH v2 9/9] i2c: i801: Improve handling platform data for tco device
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v4] i2c: tegra: Add the ACPI support
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2] i2c: i801: Remove i801_set_block_buffer_mode
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: i2c: i801: Don't silently correct invalid transfer size
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v4 11/12] dt-bindings: i2c: imx-lpi2c: Add i.MX8DXL compatible match
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: cbus-gpio: set atomic transfer callback
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 5/8] tty: serial: samsung: Enable console as module
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH 3/8] soc: samsung: Add USIv2 driver
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH V6 1/7] dt-bindings: i2c: imx-lpi2c: Add imx8ulp compatible string
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 2/8] dt-bindings: soc: samsung: Add Exynos USIv2 bindings doc
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH 8/8] spi: Make SPI_S3C64XX=y impossible when EXYNOS_USI_V2=m
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• Re: [PATCH 7/8] i2c: Make I2C_EXYNOS5=y impossible when EXYNOS_USI_V2=m
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• Re: [PATCH 6/8] tty: serial: Make SERIAL_SAMSUNG=y impossible when EXYNOS_USI_V2=m
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• Re: [PATCH v2 10/20] power: supply: bq25890: Add bq25890_set_otg_cfg() helper
  • From: Yauhen Kharuzhy <jekhor@xxxxxxxxx>
• [PATCH] eeprom: at24: remove struct at24_client
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH 4/8] tty: serial: samsung: Remove USI initialization
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• Re: [PATCH 4/8] tty: serial: samsung: Remove USI initialization
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• Re: [PATCH v2 10/20] power: supply: bq25890: Add bq25890_set_otg_cfg() helper
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 4/8] tty: serial: samsung: Remove USI initialization
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 6/8] tty: serial: Make SERIAL_SAMSUNG=y impossible when EXYNOS_USI_V2=m
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 18/20] extcon: intel-cht-wc: Refactor cht_wc_extcon_get_charger()
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v2 15/20] i2c: cht-wc: Make charger i2c-client instantiation board/device-model specific
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v2 14/20] mfd: intel_soc_pmic_chtwc: Add intel_cht_wc_get_model() helper function
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 0/8] soc: samsung: Add USIv2 driver
  • From: David Virag <virag.david003@xxxxxxxxx>
• Re: [PATCH v6 05/15] regulator: Introduce tps68470-regulator driver
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v6 03/15] i2c: acpi: Add i2c_acpi_new_device_by_fwnode() function
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 8/8] spi: Make SPI_S3C64XX=y impossible when EXYNOS_USI_V2=m
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• [PATCH 7/8] i2c: Make I2C_EXYNOS5=y impossible when EXYNOS_USI_V2=m
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• [PATCH 6/8] tty: serial: Make SERIAL_SAMSUNG=y impossible when EXYNOS_USI_V2=m
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• [PATCH 5/8] tty: serial: samsung: Enable console as module
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• [PATCH 4/8] tty: serial: samsung: Remove USI initialization
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• [PATCH 3/8] soc: samsung: Add USIv2 driver
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• [PATCH 2/8] dt-bindings: soc: samsung: Add Exynos USIv2 bindings doc
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• [PATCH 1/8] dt-bindings: soc: samsung: Add Exynos USIv2 bindings
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• [PATCH 0/8] soc: samsung: Add USIv2 driver
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• [PATCH] i2c: cbus-gpio: set atomic transfer callback
  • From: Aaro Koskinen <aaro.koskinen@xxxxxx>
• Re: [RFC] sti: Conflict in node name for an IP supporting both I2C and SPI
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PULL REQUEST] i2c for v5.16
  • From: pr-tracker-bot@xxxxxxxxxx
• Re: [rfc, PATCH v1 0/7] PCI: introduce p2sb helper
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 3/7] PCI: New Primary to Sideband (P2SB) bridge support library
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 3/7] PCI: New Primary to Sideband (P2SB) bridge support library
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 07/15] platform/x86: int3472: Enable I2c daisy chain
  • From: Daniel Scally <djrscally@xxxxxxxxx>
• Re: [PATCH v6 07/15] platform/x86: int3472: Enable I2c daisy chain
  • From: Daniel Scally <djrscally@xxxxxxxxx>
• Re: [PATCH v6 07/15] platform/x86: int3472: Enable I2c daisy chain
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v6 07/15] platform/x86: int3472: Enable I2c daisy chain
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v6 05/15] regulator: Introduce tps68470-regulator driver
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v6 03/15] i2c: acpi: Add i2c_acpi_new_device_by_fwnode() function
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PULL REQUEST] i2c for v5.16
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• [PATCH V6 4/7] dt-bindings: watchdog: imx7ulp-wdt: Add imx8ulp compatible string
  • From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
• [PATCH V6 7/7] arm64: dts: imx8ulp: Add the basic dts for imx8ulp evk board
  • From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
• [PATCH V6 3/7] dt-bindings: timer: tpm-timer: Add imx8ulp compatible string
  • From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
• [PATCH V6 6/7] arm64: dts: imx8ulp: Add the basic dtsi file for imx8ulp
  • From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
• [PATCH V6 2/7] dt-bindings: serial: fsl-lpuart: Add imx8ulp compatible string
  • From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
• [PATCH V6 1/7] dt-bindings: i2c: imx-lpi2c: Add imx8ulp compatible string
  • From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
• [PATCH V6 5/7] dt-bindings: arm: fsl: Add binding for imx8ulp evk
  • From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
• [PATCH V6 0/7] dt-bindinds/dts: support i.MX8ULP
  • From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
• Re: [PATCH v6 02/15] i2c: acpi: Use acpi_dev_ready_for_enumeration() helper
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 03/15] i2c: acpi: Add i2c_acpi_new_device_by_fwnode() function
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v4] i2c: tegra: Add the ACPI support
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH v4] i2c: tegra: Add the ACPI support
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH v6 07/15] platform/x86: int3472: Enable I2c daisy chain
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v6 05/15] regulator: Introduce tps68470-regulator driver
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [RFC] sti: Conflict in node name for an IP supporting both I2C and SPI
  • From: Alain Volmat <avolmat@xxxxxx>
• Re: [PATCH v4] i2c: tegra: Add the ACPI support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v6 03/15] i2c: acpi: Add i2c_acpi_new_device_by_fwnode() function
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v6 08/15] platform/x86: int3472: Split into 2 drivers
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v6 15/15] media: ipu3-cio2: Add support for instantiating i2c-clients for VCMs
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v6 14/15] media: ipu3-cio2: Call cio2_bridge_init() before anything else
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v6 13/15] media: ipu3-cio2: Defer probing until the PMIC is fully setup
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v6 12/15] platform/x86: int3472: Deal with probe ordering issues
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v6 11/15] platform/x86: int3472: Pass tps68470_regulator_platform_data to the tps68470-regulator MFD-cell
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v6 10/15] platform/x86: int3472: Pass tps68470_clk_platform_data to the tps68470-regulator MFD-cell
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v6 09/15] platform/x86: int3472: Add get_sensor_adev_and_name() helper
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v6 07/15] platform/x86: int3472: Enable I2c daisy chain
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v6 06/15] clk: Introduce clk-tps68470 driver
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v6 05/15] regulator: Introduce tps68470-regulator driver
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v6 04/15] platform_data: Add linux/platform_data/tps68470.h file
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v6 03/15] i2c: acpi: Add i2c_acpi_new_device_by_fwnode() function
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v6 02/15] i2c: acpi: Use acpi_dev_ready_for_enumeration() helper
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v6 01/15] ACPI: delay enumeration of devices with a _DEP pointing to an INT3472 device
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v6 00/15] Add support for X86/ACPI camera sensor/PMIC setup with clk and regulator platform data
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v4] i2c: tegra: Add the ACPI support
  • From: Akhil R <akhilrajeev@xxxxxxxxxx>
• Re:
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: (EXT) Re: (EXT) Re: (EXT) Re: [PATCH v4 12/12] dt-bindings: serial: fsl-lpuart: Add i.MX8DXL compatible
  • From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
• Re: (EXT) Re: (EXT) Re: [PATCH v4 12/12] dt-bindings: serial: fsl-lpuart: Add i.MX8DXL compatible
  • From: Abel Vesa <abel.vesa@xxxxxxx>
• Re: [PATCH v3] i2c: tegra: Add the ACPI support
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH V5 0/8] dt-bindinds/dts: support i.MX8ULP
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• RE: [PATCH V5 0/8] dt-bindinds/dts: support i.MX8ULP
  • From: Peng Fan <peng.fan@xxxxxxx>
• RE: [PATCH V5 0/8] dt-bindinds/dts: support i.MX8ULP
  • From: Peng Fan <peng.fan@xxxxxxx>
• [PATCH v3] i2c: tegra: Add the ACPI support
  • From: Akhil R <akhilrajeev@xxxxxxxxxx>
• Re: [PATCH v2 0/2] virtio-i2c: Fix buffer handling
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v2 0/2] virtio-i2c: Fix buffer handling
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 0/2] virtio-i2c: Fix buffer handling
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v2 0/2] virtio-i2c: Fix buffer handling
  • From: "Michael S. Tsirkin" <mst@xxxxxxxxxx>
• Re: [PATCH v2] i2c: tegra: Add ACPI support
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• RE: [PATCH v2] i2c: tegra: Add ACPI support
  • From: Akhil R <akhilrajeev@xxxxxxxxxx>
• Re: [PATCH v2] i2c: tegra: Add ACPI support
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• RE: [PATCH v2] i2c: tegra: Add ACPI support
  • From: Akhil R <akhilrajeev@xxxxxxxxxx>
• Re: [PATCH net-next v3 0/6] MCTP I2C driver
  • From: Matt Johnston <matt@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1 1/1] i2c: designware: Fix the kernel doc description for struct dw_i2c_dev
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2] i2c: tegra: Add ACPI support
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2] i2c: tegra: Add ACPI support
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH v2] i2c: tegra: Add ACPI support
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 2/2] i2c:imx: Add an extra read at the end of an I2C slave read
  • From: Corey Minyard <minyard@xxxxxxx>
• Re: [PATCH] docs: i2c: smbus-protocol: mention the repeated start condition
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH V5 8/9] arm64: dts: imx8ulp: Add the basic dtsi file for imx8ulp
  • From: Shawn Guo <shawnguo@xxxxxxxxxx>
• Re: [PATCH 01/13] dt-bindings: interrupt-controller: create a header for RISC-V interrupts
  • From: Anup Patel <anup@xxxxxxxxxxxxxx>
• Re: [PATCH 04/13] dt-bindings: riscv: update microchip polarfire binds
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• Re: [PATCH 02/13] dt-bindings: interrupt-controller: add defines for mpfs-plic
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• Re: [PATCH 01/13] dt-bindings: interrupt-controller: create a header for RISC-V interrupts
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• Re: [PATCH v1 3/3] i2c: mux: gpio: Use array_size() helper
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v1 2/3] i2c: mux: gpio: Don't dereference fwnode from struct device
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v1 1/3] i2c: mux: gpio: Replace custom acpi_get_local_address()
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v1 1/3] i2c: mux: gpio: Replace custom acpi_get_local_address()
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2] Docs: Fixes link to I2C specification
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 2/2] i2c:imx: Add an extra read at the end of an I2C slave read
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 2/2] arm: samsung: Remove HAVE_S3C2410_I2C and use direct dependencies
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 1/2] i2c: virtio: disable timeout handling
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 1/2] i2c: virtio: disable timeout handling
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v2 1/2] i2c: virtio: disable timeout handling
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 2/3] dt-bindings: i2c: apple,i2c: allow multiple compatibles
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: i801: Restore INTREN on unload
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v4] i2c: i801: Fix interrupt storm from SMB_ALERT signal
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v4 01/12] dt-bindings: i2c: imx-lpi2c: Fix i.MX 8QM compatible matching
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v4 01/12] dt-bindings: i2c: imx-lpi2c: Fix i.MX 8QM compatible matching
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 15/20] i2c: cht-wc: Make charger i2c-client instantiation board/device-model specific
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: (EXT) Re: (EXT) Re: [PATCH v4 12/12] dt-bindings: serial: fsl-lpuart: Add i.MX8DXL compatible
  • From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
• [PATCH v2] i2c: tegra: Add ACPI support
  • From: Akhil R <akhilrajeev@xxxxxxxxxx>
• Re: [PATCH v2 0/3] Apple Arm patform device tree and bindings fixes
  • From: Hector Martin <marcan@xxxxxxxxx>
• Re: (subset) [PATCH V5 0/8] dt-bindinds/dts: support i.MX8ULP
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 2/3] dt-bindings: i2c: apple,i2c: allow multiple compatibles
  • From: Mark Kettenis <mark.kettenis@xxxxxxxxx>
• [PATCH v2 2/3] dt-bindings: i2c: apple,i2c: allow multiple compatibles
  • From: Janne Grunau <j@xxxxxxxxxx>
• [PATCH v2 0/3] Apple Arm patform device tree and bindings fixes
  • From: Janne Grunau <j@xxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: i2c: apple,i2c: allow multiple compatibles
  • From: "Sven Peter" <sven@xxxxxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: i2c: apple,i2c: allow multiple compatibles
  • From: Janne Grunau <j@xxxxxxxxxx>
• Re: (EXT) Re: [PATCH v4 12/12] dt-bindings: serial: fsl-lpuart: Add i.MX8DXL compatible
  • From: Abel Vesa <abel.vesa@xxxxxxx>
• Re: [PATCH v2] i2c: i801: Improve handling of chip-specific feature definitions
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v4 12/12] dt-bindings: serial: fsl-lpuart: Add i.MX8DXL compatible
  • From: Abel Vesa <abel.vesa@xxxxxxx>
• Re: [PATCH] i2c: tegra: Add ACPI support
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH] i2c: tegra: Add ACPI support
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH] dt-bindings: Remove Netlogic bindings
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: rk3x: enable clock before getting rate
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• RE: [PATCH v3 2/2] i2c: exynos5: add support for ExynosAutov9 SoC
  • From: "Jaewon Kim" <jaewon02.kim@xxxxxxxxxxx>
• Re: [PATCH] dt-bindings: Remove Netlogic bindings
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2] Docs: Fixes link to I2C specification
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: i2c: apple,i2c: allow multiple compatibles
  • From: "Sven Peter" <sven@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: rk3x: enable clock before getting rate
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• Re: [PATCH v2] Docs: Fixes link to I2C specification
  • From: Deep Majumder <deep@xxxxxxxxxxx>
• [PATCH 2/3] dt-bindings: i2c: apple,i2c: allow multiple compatibles
  • From: Janne Grunau <j@xxxxxxxxxx>
• [PATCH 0/3] Apple Arm patform device tree and bindings fixes
  • From: Janne Grunau <j@xxxxxxxxxx>
• Re: [PATCH v2 1/2] arm64: defconfig: Enable Samsung I2C driver
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• [PATCH v2 2/2] arm: samsung: Remove HAVE_S3C2410_I2C and use direct dependencies
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• [PATCH v2 1/2] arm64: defconfig: Enable Samsung I2C driver
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• Re: [PATCH 1/2] arm: samsung: Remove HAVE_S3C2410_I2C and use direct dependencies
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• Re: [PATCH 1/2] arm: samsung: Remove HAVE_S3C2410_I2C and use direct dependencies
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• [PATCH V5 8/8] arm64: dts: imx8ulp: Add the basic dts for imx8ulp evk board
  • From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
• [PATCH V5 7/8] arm64: dts: imx8ulp: Add the basic dtsi file for imx8ulp
  • From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
• [PATCH V5 6/8] dt-bindings: arm: fsl: Add binding for imx8ulp evk
  • From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
• [PATCH V5 5/8] dt-bindings: watchdog: imx7ulp-wdt: Add imx8ulp compatible string
  • From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
• [PATCH V5 4/8] dt-bindings: timer: tpm-timer: Add imx8ulp compatible string
  • From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
• [PATCH V5 3/8] dt-bindings: spi: fsl-lpspi: Add imx8ulp compatible string
  • From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
• [PATCH V5 2/8] dt-bindings: serial: fsl-lpuart: Add imx8ulp compatible string
  • From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
• [PATCH V5 1/8] dt-bindings: i2c: imx-lpi2c: Add imx8ulp compatible string
  • From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
• [PATCH V5 0/8] dt-bindinds/dts: support i.MX8ULP
  • From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
• RE: [PATCH] i2c: tegra: Add ACPI support
  • From: Akhil R <akhilrajeev@xxxxxxxxxx>
• [PATCH v2] i2c: i801: Improve handling of chip-specific feature definitions
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH v2 18/20] extcon: intel-cht-wc: Refactor cht_wc_extcon_get_charger()
  • From: Chanwoo Choi <cwchoi00@xxxxxxxxx>
• Re: [PATCH v2] Docs: Fixes link to I2C specification
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] i2c: virtio: disable timeout handling
  • From: Vincent Whitchurch <vincent.whitchurch@xxxxxxxx>
• Re: [PATCH] i2c: tegra: Add ACPI support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v1] HID: ft260: fix i2c probing for hwmon devices
  • From: Jiri Kosina <jikos@xxxxxxxxxx>
• Re: [PATCH v2] i2c: i801: Remove i801_set_block_buffer_mode
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v3 2/2] i2c: exynos5: add support for ExynosAutov9 SoC
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• [PATCH] i2c: tegra: Add ACPI support
  • From: Akhil R <akhilrajeev@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: i2c: exynos5: add exynosautov9-hsi2c compatible
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] i2c: exynos5: add support for ExynosAutov9 SoC
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] i2c: exynos5: add support for ExynosAutov9 SoC
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: (EXT) Re: [PATCH v4 12/12] dt-bindings: serial: fsl-lpuart: Add i.MX8DXL compatible
  • From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
• [PATCH v2] Docs: Fixes link to I2C specification
  • From: Deep Majumder <deep@xxxxxxxxxxx>
• Re: [PATCH v4 12/12] dt-bindings: serial: fsl-lpuart: Add i.MX8DXL compatible
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 11/12] dt-bindings: i2c: imx-lpi2c: Add i.MX8DXL compatible match
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 02/12] dt-bindings: serial: fsl-lpuart: Fix i.MX 8QM compatible matching
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 01/12] dt-bindings: i2c: imx-lpi2c: Fix i.MX 8QM compatible matching
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH V5 8/9] arm64: dts: imx8ulp: Add the basic dtsi file for imx8ulp
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v2] i2c: i801: Remove i801_set_block_buffer_mode
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH] i2c: i801: Remove i801_set_block_buffer_mode
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH] i2c: i801: Remove i801_set_block_buffer_mode
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH v3 2/2] i2c: exynos5: add support for ExynosAutov9 SoC
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• Re: [RESEND PATCH] i2c: rk3x: Handle a spurious start completion interrupt flag
  • From: John Keeping <john@xxxxxxxxxxxx>
• Re: [PATCH] i2c: rk3x: disable and reenable I2C after timeouts to fix stuck low SDA
  • From: John Keeping <john@xxxxxxxxxxxx>
• Re: [PATCH] 2c: i801: Improve handling of chip-specific feature definitions
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH] 2c: i801: Improve handling of chip-specific feature definitions
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v4 1/2] dt-bindings: i2c-mux: Add property for settle time
  • From: Horatiu Vultur <horatiu.vultur@xxxxxxxxxxxxx>
• Re: [PATCH] 2c: i801: Improve handling of chip-specific feature definitions
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 1/3] i2c: mux: gpio: Replace custom acpi_get_local_address()
  • From: Peter Rosin <peda@xxxxxxxxxx>
• RE: [PATCH] i2c: rcar: add SMBus block read support
  • From: Andrew Gabbasov <andrew_gabbasov@xxxxxxxxxx>
• Re: [PATCH v1 1/3] i2c: mux: gpio: Replace custom acpi_get_local_address()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] i2c: i801: Remove i801_set_block_buffer_mode
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v4] i2c: i801: Fix interrupt storm from SMB_ALERT signal
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH] 2c: i801: Improve handling of chip-specific feature definitions
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH] 2c: i801: Improve handling of chip-specific feature definitions
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v1 3/3] i2c: mux: gpio: Use array_size() helper
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v1 2/3] i2c: mux: gpio: Don't dereference fwnode from struct device
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v1 1/3] i2c: mux: gpio: Replace custom acpi_get_local_address()
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH RESUBMIT] i2c: cadence: Add standard bus recovery support
  • From: Robert Hancock <robert.hancock@xxxxxxxxxx>
• Re: [PATCH v2 18/20] extcon: intel-cht-wc: Refactor cht_wc_extcon_get_charger()
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v2 16/20] extcon: intel-cht-wc: Use new intel_cht_wc_get_model() helper
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v3 2/2] i2c: exynos5: add support for ExynosAutov9 SoC
  • From: David Virag <virag.david003@xxxxxxxxx>
• Re: [PATCH v2 00/20] power-suppy/i2c/extcon: Fix charger setup on Xiaomi Mi Pad 2 and Lenovo Yogabook
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• Re: [PATCH 12/13] riscv: icicle-kit: update microchip icicle kit device tree
  • From: <Daire.McNamara@xxxxxxxxxxxxx>
• [PATCH v4] i2c: i801: Fix interrupt storm from SMB_ALERT signal
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 18/20] extcon: intel-cht-wc: Refactor cht_wc_extcon_get_charger()
  • From: Chanwoo Choi <cwchoi00@xxxxxxxxx>
• Re: [PATCH v2 16/20] extcon: intel-cht-wc: Use new intel_cht_wc_get_model() helper
  • From: Chanwoo Choi <cwchoi00@xxxxxxxxx>
• Re: [PATCH v3 2/2] i2c: exynos5: add support for ExynosAutov9 SoC
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• Re: [PATCH v2 19/20] extcon: intel-cht-wc: Add support for registering a power_supply class-device
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 17/20] extcon: intel-cht-wc: Support devs with Micro-B / USB-2 only Type-C connectors
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v2 15/20] i2c: cht-wc: Make charger i2c-client instantiation board/device-model specific
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v2 14/20] mfd: intel_soc_pmic_chtwc: Add intel_cht_wc_get_model() helper function
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v2 13/20] power: supply: bq25890: Support higher charging voltages through Pump Express+ protocol
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v2 17/20] extcon: intel-cht-wc: Support devs with Micro-B / USB-2 only Type-C connectors
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 17/20] extcon: intel-cht-wc: Support devs with Micro-B / USB-2 only Type-C connectors
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 17/20] extcon: intel-cht-wc: Support devs with Micro-B / USB-2 only Type-C connectors
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 15/20] i2c: cht-wc: Make charger i2c-client instantiation board/device-model specific
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 14/20] mfd: intel_soc_pmic_chtwc: Add intel_cht_wc_get_model() helper function
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 13/20] power: supply: bq25890: Support higher charging voltages through Pump Express+ protocol
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 11/20] power: supply: bq25890: Add support for registering the Vbus boost converter as a regulator
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 00/20] power-suppy/i2c/extcon: Fix charger setup on Xiaomi Mi Pad 2 and Lenovo Yogabook
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v2 09/20] power: supply: bq25890: Drop dev->platform_data == NULL check
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 00/20] power-suppy/i2c/extcon: Fix charger setup on Xiaomi Mi Pad 2 and Lenovo Yogabook
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3] i2c: i801: Fix interrupt storm from SMB_ALERT signal
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3] i2c: i801: Fix interrupt storm from SMB_ALERT signal
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: i801: Restore INTREN on unload
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v3] i2c: i801: Fix interrupt storm from SMB_ALERT signal
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v2 04/20] power: supply: bq25890: Reduce reported CONSTANT_CHARGE_CURRENT_MAX for low temperatures
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v4] gpio: Return EPROBE_DEFER if gc->to_irq is NULL
  • From: Shreeya Patel <shreeya.patel@xxxxxxxxxxxxx>
• Re: [PATCH v2 10/20] power: supply: bq25890: Add bq25890_set_otg_cfg() helper
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v3 2/2] i2c: exynos5: add support for ExynosAutov9 SoC
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• RE: [PATCH] i2c: designware: Get HCNT/LCNT values from dts
  • From: "Wang, Lawrence (NSB - CN/Hangzhou)" <lawrence.wang@xxxxxxxxxxxxxxx>
• RE: [PATCH v3 2/2] i2c: exynos5: add support for ExynosAutov9 SoC
  • From: "Chanho Park" <chanho61.park@xxxxxxxxxxx>
• Re: [PATCH v3 2/2] i2c: exynos5: add support for ExynosAutov9 SoC
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: i2c: exynos5: add exynosautov9-hsi2c compatible
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• [PATCH v3] gpio: Return EPROBE_DEFER if gc->to_irq is NULL
  • From: Shreeya Patel <shreeya.patel@xxxxxxxxxxxxx>
• Re: [PATCH v1 3/3] i2c: mux: gpio: Use array_size() helper
  • From: Evan Green <evgreen@xxxxxxxxxxxx>
• Re: [PATCH v1 2/3] i2c: mux: gpio: Don't dereference fwnode from struct device
  • From: Evan Green <evgreen@xxxxxxxxxxxx>
• Re: [PATCH v1 1/3] i2c: mux: gpio: Replace custom acpi_get_local_address()
  • From: Evan Green <evgreen@xxxxxxxxxxxx>
• Re: [PATCH 12/13] riscv: icicle-kit: update microchip icicle kit device tree
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH net-next v3 0/6] MCTP I2C driver
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH net-next v3 0/6] MCTP I2C driver
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• Re: [PATCH v1 1/1] i2c: designware: Fix the kernel doc description for struct dw_i2c_dev
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH v1 2/3] i2c: mux: gpio: Don't dereference fwnode from struct device
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 3/3] i2c: mux: gpio: Use array_size() helper
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 1/3] i2c: mux: gpio: Replace custom acpi_get_local_address()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 12/13] riscv: icicle-kit: update microchip icicle kit device tree
  • From: <Conor.Dooley@xxxxxxxxxxxxx>
• Re: [PATCH net-next v3 0/6] MCTP I2C driver
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v1 1/1] i2c: designware: Fix the kernel doc description for struct dw_i2c_dev
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH V4 2/9] dt-bindings: mmc: imx-esdhc: Add imx8ulp compatible string
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH net-next v3 0/6] MCTP I2C driver
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• Re: [PATCH v1 1/1] i2c: designware: Fix the kernel doc description for struct dw_i2c_dev
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [syzbot] WARNING in __i2c_transfer (2)
  • From: syzbot <syzbot+e417648b303855b91d8a@xxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] docs: i2c: smbus-protocol: mention the repeated start condition
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH] i2c: designware: Get HCNT/LCNT values from dts
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• RE: [PATCH] i2c: designware: Get HCNT/LCNT values from dts
  • From: "Wang, Lawrence (NSB - CN/Hangzhou)" <lawrence.wang@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: designware: Get HCNT/LCNT values from dts
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: designware: Get HCNT/LCNT values from dts
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 10/20] power: supply: bq25890: Add bq25890_set_otg_cfg() helper
  • From: Yauhen Kharuzhy <jekhor@xxxxxxxxx>
• [PATCH] i2c: designware: Get HCNT/LCNT values from dts
  • From: "Lawrence,Wang" <lawrence.wang@xxxxxxxxxxxxxxx>
• [PATCH net-next v3 6/6] mctp i2c: MCTP I2C binding driver
  • From: Matt Johnston <matt@xxxxxxxxxxxxxxxxxxxx>
• [PATCH net-next v3 5/6] dt-bindings: net: New binding mctp-i2c-controller
  • From: Matt Johnston <matt@xxxxxxxxxxxxxxxxxxxx>
• [PATCH net-next v3 4/6] i2c: npcm7xx: Allow 255 byte block SMBus transfers
  • From: Matt Johnston <matt@xxxxxxxxxxxxxxxxxxxx>
• [PATCH net-next v3 0/6] MCTP I2C driver
  • From: Matt Johnston <matt@xxxxxxxxxxxxxxxxxxxx>
• [PATCH net-next v3 1/6] i2c: core: Allow 255 byte transfers for SMBus 3.x
  • From: Matt Johnston <matt@xxxxxxxxxxxxxxxxxxxx>
• [PATCH net-next v3 3/6] i2c: aspeed: Allow 255 byte block transfers
  • From: Matt Johnston <matt@xxxxxxxxxxxxxxxxxxxx>
• [PATCH net-next v3 2/6] i2c: dev: Handle 255 byte blocks for i2c ioctl
  • From: Matt Johnston <matt@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 15/20] i2c: cht-wc: Make charger i2c-client instantiation board/device-model specific
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 17/20] extcon: intel-cht-wc: Support devs with Micro-B / USB-2 only Type-C connectors
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 18/20] extcon: intel-cht-wc: Refactor cht_wc_extcon_get_charger()
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 19/20] extcon: intel-cht-wc: Add support for registering a power_supply class-device
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 20/20] extcon: intel-cht-wc: Report RID_A for ACA adapters
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 16/20] extcon: intel-cht-wc: Use new intel_cht_wc_get_model() helper
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 14/20] mfd: intel_soc_pmic_chtwc: Add intel_cht_wc_get_model() helper function
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 13/20] power: supply: bq25890: Support higher charging voltages through Pump Express+ protocol
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 10/20] power: supply: bq25890: Add bq25890_set_otg_cfg() helper
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 12/20] power: supply: bq25890: On the bq25892 set the IINLIM based on external charger detection
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 11/20] power: supply: bq25890: Add support for registering the Vbus boost converter as a regulator
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 09/20] power: supply: bq25890: Drop dev->platform_data == NULL check
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 08/20] power: supply: bq25890: Enable charging on boards where we skip reset
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 04/20] power: supply: bq25890: Reduce reported CONSTANT_CHARGE_CURRENT_MAX for low temperatures
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 05/20] power: supply: bq25890: Add a bq25890_rw_init_data() helper
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 06/20] power: supply: bq25890: Add support to skip reset at probe() / remove()
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 07/20] power: supply: bq25890: Add support to read back the settings from the chip
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 03/20] power: supply: bq25890: Rename IILIM field to IINLIM
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 02/20] power: supply: bq25890: Fix ADC continuous conversion setting when charging
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 01/20] power: supply: core: Refactor power_supply_set_input_current_limit_from_supplier()
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 00/20] power-suppy/i2c/extcon: Fix charger setup on Xiaomi Mi Pad 2 and Lenovo Yogabook
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v4 1/2] dt-bindings: i2c-mux: Add property for settle time
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v1 1/1] i2c: designware: Fix the kernel doc description for struct dw_i2c_dev
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: [PATCH v1 1/1] i2c: designware: Fix the kernel doc description for struct dw_i2c_dev
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v1 1/1] i2c: designware: Fix the kernel doc description for struct dw_i2c_dev
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: [PATCH V4 6/9] dt-bindings: watchdog: imx7ulp-wdt: Add imx8ulp compatible string
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH v2 2/2] i2c:imx: Add an extra read at the end of an I2C slave read
  • From: minyard@xxxxxxx
• [PATCH v2 1/2] i2c:imx: Add timer for handling the stop condition
  • From: minyard@xxxxxxx
• [PATCH v2 0/2] i2c:imx: Deliver a timely stop on slave side, fix recv
  • From: minyard@xxxxxxx
• Re: [PATCH v1 1/1] i2c: designware: Fix the kernel doc description for struct dw_i2c_dev
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• [PATCH v1 1/1] i2c: designware: Fix the kernel doc description for struct dw_i2c_dev
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: designware: I2C unexpected interrupt handling will cause kernel panic
  • From: "andriy.shevchenko" <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH V5 9/9] arm64: dts: imx8ulp: Add the basic dts for imx8ulp evk board
  • From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
• [PATCH V5 8/9] arm64: dts: imx8ulp: Add the basic dtsi file for imx8ulp
  • From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
• [PATCH V4 7/9] dt-bindings: arm: fsl: Add binding for imx8ulp evk
  • From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
• [PATCH V4 6/9] dt-bindings: watchdog: imx7ulp-wdt: Add imx8ulp compatible string
  • From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
• [PATCH V4 5/9] dt-bindings: timer: tpm-timer: Add imx8ulp compatible string
  • From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
• [PATCH V4 4/9] dt-bindings: spi: fsl-lpspi: Add imx8ulp compatible string
  • From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
• [PATCH V4 3/9] dt-bindings: serial: fsl-lpuart: Add imx8ulp compatible string
  • From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
• [PATCH V4 2/9] dt-bindings: mmc: imx-esdhc: Add imx8ulp compatible string
  • From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
• [PATCH V4 1/9] dt-bindings: i2c: imx-lpi2c: Add imx8ulp compatible string
  • From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
• [PATCH V4 0/9] dt-bindinds/dts: support i.MX8ULP
  • From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
• Re: [PATCH v3 2/2] i2c: exynos5: add support for ExynosAutov9 SoC
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH v3 2/5] dt-bindings: mfd: timers: Update maintainers for st,stm32-timers
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v2 1/2] i2c: virtio: disable timeout handling
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• [PATCH v3 2/2] i2c: exynos5: add support for ExynosAutov9 SoC
  • From: Jaewon Kim <jaewon02.kim@xxxxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: i2c: exynos5: add exynosautov9-hsi2c compatible
  • From: Jaewon Kim <jaewon02.kim@xxxxxxxxxxx>
• [PATCH v3 0/2] i2c: exynos5: add support for ExynosAutov9 SoC
  • From: Jaewon Kim <jaewon02.kim@xxxxxxxxxxx>
• [PATCH] i2c: i801: Remove i801_set_block_buffer_mode
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH v2] gpio: Return EPROBE_DEFER if gc->to_irq is NULL
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2] gpio: Return EPROBE_DEFER if gc->to_irq is NULL
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] Docs: Fixes link to I2C specification
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] Docs: Fixes link to I2C specification
  • From: Deep Majumder <deep@xxxxxxxxxxx>
• Re: [PATCH] pci: Don't call resume callback for nearly bound devices
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH] pci: Don't call resume callback for nearly bound devices
  • From: Robert Święcki <robert@xxxxxxxxxxx>
• Re: [PATCH] pci: Don't call resume callback for nearly bound devices
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v2 2/2] i2c: virtio: fix completion handling
  • From: "Michael S. Tsirkin" <mst@xxxxxxxxxx>
• Re: [PATCH v2 1/2] i2c: virtio: disable timeout handling
  • From: "Michael S. Tsirkin" <mst@xxxxxxxxxx>
• Re: [PATCH] i2c: designware: I2C unexpected interrupt handling will cause kernel panic
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 1/2] i2c: virtio: disable timeout handling
  • From: Vincent Whitchurch <vincent.whitchurch@xxxxxxxx>
• [PATCH v2 0/2] virtio-i2c: Fix buffer handling
  • From: Vincent Whitchurch <vincent.whitchurch@xxxxxxxx>
• [PATCH v2 2/2] i2c: virtio: fix completion handling
  • From: Vincent Whitchurch <vincent.whitchurch@xxxxxxxx>
• Re: [PATCH v4 04/11] regulator: Introduce tps68470-regulator driver
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v3 1/4] dt-bindings: i2c: i2c-mt65xx: convert doc to yaml schema format
  • From: Rob Herring <robh@xxxxxxxxxx>