[PATCH v2 2/3] i2c: sh_mobile: Use platform_get_irq_optional() to get the interrupt

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.

In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq_optional() for DT users only.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
---
v1->v2
* Dropped IRQ0 check
* Simplified code
---
 drivers/i2c/busses/i2c-sh_mobile.c | 34 +++++++++++++++++++++++-------
 1 file changed, 26 insertions(+), 8 deletions(-)

diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c
index 7b8caf172851..9754849dbb23 100644
--- a/drivers/i2c/busses/i2c-sh_mobile.c
+++ b/drivers/i2c/busses/i2c-sh_mobile.c
@@ -830,20 +830,38 @@ static void sh_mobile_i2c_release_dma(struct sh_mobile_i2c_data *pd)
 
 static int sh_mobile_i2c_hook_irqs(struct platform_device *dev, struct sh_mobile_i2c_data *pd)
 {
-	struct resource *res;
-	resource_size_t n;
+	struct device_node *np = dev_of_node(&dev->dev);
 	int k = 0, ret;
 
-	while ((res = platform_get_resource(dev, IORESOURCE_IRQ, k))) {
-		for (n = res->start; n <= res->end; n++) {
-			ret = devm_request_irq(&dev->dev, n, sh_mobile_i2c_isr,
-					  0, dev_name(&dev->dev), pd);
+	if (np) {
+		int irq;
+
+		while ((irq = platform_get_irq_optional(dev, k)) != -ENXIO) {
+			if (irq < 0)
+				return irq;
+			ret = devm_request_irq(&dev->dev, irq, sh_mobile_i2c_isr,
+					       0, dev_name(&dev->dev), pd);
 			if (ret) {
-				dev_err(&dev->dev, "cannot request IRQ %pa\n", &n);
+				dev_err(&dev->dev, "cannot request IRQ %d\n", irq);
 				return ret;
 			}
+			k++;
+		};
+	} else {
+		struct resource *res;
+		resource_size_t n;
+
+		while ((res = platform_get_resource(dev, IORESOURCE_IRQ, k))) {
+			for (n = res->start; n <= res->end; n++) {
+				ret = devm_request_irq(&dev->dev, n, sh_mobile_i2c_isr,
+						       0, dev_name(&dev->dev), pd);
+				if (ret) {
+					dev_err(&dev->dev, "cannot request IRQ %pa\n", &n);
+					return ret;
+				}
+			}
+			k++;
 		}
-		k++;
 	}
 
 	return k > 0 ? 0 : -ENOENT;
-- 
2.17.1




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux