On Tue, Dec 14, 2021 at 10:50:18AM +0100, Patrick Rudolph wrote:
> Add the Maxim MAX735x as supported chip to PCA954x and add an
> example how to use it.
The subject needs some work. Every change is an 'update' and you should
say something about Maxim. 'Add Maxim MAX735x variants' or something.
>
> Signed-off-by: Patrick Rudolph <patrick.rudolph@xxxxxxxxxxxxx>
> ---
> .../bindings/i2c/i2c-mux-pca954x.yaml | 40 +++++++++++++++++++
> 1 file changed, 40 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
> index 9f1726d0356b..bd794cb80c11 100644
> --- a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
> +++ b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
> @@ -11,6 +11,7 @@ maintainers:
>
> description:
> The binding supports NXP PCA954x and PCA984x I2C mux/switch devices.
> + Compatible with Maxim MAX7356 - MAX7358 I2C mux/switch devices.
>
> allOf:
> - $ref: /schemas/i2c/i2c-mux.yaml#
> @@ -19,6 +20,9 @@ properties:
> compatible:
> oneOf:
> - enum:
> + - maxim,max7356
> + - maxim,max7357
> + - maxim,max7358
> - nxp,pca9540
> - nxp,pca9542
> - nxp,pca9543
> @@ -40,6 +44,7 @@ properties:
>
> interrupts:
> maxItems: 1
> + description: Only supported on NXP devices. Unsupported on Maxim MAX735x.
You can express that as an if/then schema.
Just 'interrupts: false' for maxim compatibles. There's lots of
examples in the tree.
>
> "#interrupt-cells":
> const: 2
> @@ -100,6 +105,41 @@ examples:
> #size-cells = <0>;
> reg = <4>;
>
> + rtc@51 {
> + compatible = "nxp,pcf8563";
> + reg = <0x51>;
> + };
Unrelated change.
> + };
> + };
> + };
> +
> + - |
> + i2c {
> + #address-cells = <1>;
> + #size-cells = <0>;
Really need another example?
> +
> + i2c-mux@74 {
> + compatible = "maxim,max7357";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x74>;
> +
> + i2c@1 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <1>;
> +
> + eeprom@54 {
> + compatible = "atmel,24c08";
> + reg = <0x54>;
> + };
> + };
> +
> + i2c@7 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <7>;
> +
> rtc@51 {
> compatible = "nxp,pcf8563";
> reg = <0x51>;
> --
> 2.33.1
>
>
