Instead of open coded variant switch to use i2c_new_ccgx_ucsi().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
---
drivers/i2c/busses/Kconfig | 1 +
drivers/i2c/busses/i2c-designware-pcidrv.c | 30 ++++------------------
2 files changed, 6 insertions(+), 25 deletions(-)
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 0fb2caf7498c..451ddec12dba 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -577,6 +577,7 @@ config I2C_DESIGNWARE_PCI
tristate "Synopsys DesignWare PCI"
depends on PCI
select I2C_DESIGNWARE_CORE
+ select I2C_CCGX_UCSI
help
If you say yes to this option, support will be included for the
Synopsys DesignWare I2C adapter. Only master mode is supported.
diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c
index 0f409a4c2da0..2952eca87b86 100644
--- a/drivers/i2c/busses/i2c-designware-pcidrv.c
+++ b/drivers/i2c/busses/i2c-designware-pcidrv.c
@@ -24,6 +24,7 @@
#include <linux/slab.h>
#include "i2c-designware-core.h"
+#include "i2c-ccgx-ucsi.h"
#define DRIVER_NAME "i2c-designware-pci"
#define AMD_CLK_RATE_HZ 100000
@@ -118,26 +119,6 @@ static int mfld_setup(struct pci_dev *pdev, struct dw_pci_controller *c)
return -ENODEV;
}
- /*
- * TODO find a better way how to deduplicate instantiation
- * of USB PD slave device from nVidia GPU driver.
- */
-static int navi_amd_register_client(struct dw_i2c_dev *dev)
-{
- struct i2c_board_info info;
-
- memset(&info, 0, sizeof(struct i2c_board_info));
- strscpy(info.type, "ccgx-ucsi", I2C_NAME_SIZE);
- info.addr = 0x08;
- info.irq = dev->irq;
-
- dev->slave = i2c_new_client_device(&dev->adapter, &info);
- if (IS_ERR(dev->slave))
- return PTR_ERR(dev->slave);
-
- return 0;
-}
-
static int navi_amd_setup(struct pci_dev *pdev, struct dw_pci_controller *c)
{
struct dw_i2c_dev *dev = dev_get_drvdata(&pdev->dev);
@@ -324,11 +305,10 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev,
}
if ((dev->flags & MODEL_MASK) == MODEL_AMD_NAVI_GPU) {
- r = navi_amd_register_client(dev);
- if (r) {
- dev_err(dev->dev, "register client failed with %d\n", r);
- return r;
- }
+ dev->slave = i2c_new_ccgx_ucsi(&dev->adapter, dev->irq, NULL);
+ if (IS_ERR(dev->slave))
+ return dev_err_probe(&pdev->dev, PTR_ERR(dev->slave),
+ "register UCSI failed\n");
}
pm_runtime_set_autosuspend_delay(&pdev->dev, 1000);
--
2.33.0
