[PATCH V5 8/8] arm64: dts: imx8ulp: Add the basic dts for imx8ulp evk board

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Jacky Bai <ping.bai@xxxxxxx>

Add the basic dts file for i.MX8ULP EVK board.
Only the necessary devices for minimal system boot up are enabled:
enet, emmc, usb, console uart.

some of the devices' pin status may lost during low power mode,
so additional sleep pinctrl properties are included by default.

Reviewed-by: Dong Aisheng <aisheng.dong@xxxxxxx>
Signed-off-by: Jacky Bai <ping.bai@xxxxxxx>
Signed-off-by: Peng Fan <peng.fan@xxxxxxx>
---
 - v5
  Fix eMMC bus width
  Drop pinctrl enet

 - v4
  Fix memory node
  Drop usb and fec nodes

 - v3 changes:
   no

 - v2 changes:
   add the memory node place holder
   update the license

 arch/arm64/boot/dts/freescale/Makefile        |  1 +
 arch/arm64/boot/dts/freescale/imx8ulp-evk.dts | 64 +++++++++++++++++++
 2 files changed, 65 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8ulp-evk.dts

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index a14a6173b765..c64616192794 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -71,6 +71,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8qm-mek.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qxp-ai_ml.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-eval-v3.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb
 
 dtb-$(CONFIG_ARCH_S32) += s32g274a-evb.dtb
 dtb-$(CONFIG_ARCH_S32) += s32g274a-rdb2.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts b/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts
new file mode 100644
index 000000000000..33e84c4e9ed8
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2021 NXP
+ */
+
+/dts-v1/;
+
+#include "imx8ulp.dtsi"
+
+/ {
+	model = "NXP i.MX8ULP EVK";
+	compatible = "fsl,imx8ulp-evk", "fsl,imx8ulp";
+
+	chosen {
+		stdout-path = &lpuart5;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0 0x80000000>;
+	};
+};
+
+&lpuart5 {
+	/* console */
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_lpuart5>;
+	pinctrl-1 = <&pinctrl_lpuart5>;
+	status = "okay";
+};
+
+&usdhc0 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc0>;
+	pinctrl-1 = <&pinctrl_usdhc0>;
+	non-removable;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&iomuxc1 {
+	pinctrl_lpuart5: lpuart5grp {
+		fsl,pins = <
+			MX8ULP_PAD_PTF14__LPUART5_TX	0x3
+			MX8ULP_PAD_PTF15__LPUART5_RX	0x3
+		>;
+	};
+
+	pinctrl_usdhc0: usdhc0grp {
+		fsl,pins = <
+			MX8ULP_PAD_PTD1__SDHC0_CMD	0x43
+			MX8ULP_PAD_PTD2__SDHC0_CLK	0x10042
+			MX8ULP_PAD_PTD10__SDHC0_D0	0x43
+			MX8ULP_PAD_PTD9__SDHC0_D1	0x43
+			MX8ULP_PAD_PTD8__SDHC0_D2	0x43
+			MX8ULP_PAD_PTD7__SDHC0_D3	0x43
+			MX8ULP_PAD_PTD6__SDHC0_D4	0x43
+			MX8ULP_PAD_PTD5__SDHC0_D5	0x43
+			MX8ULP_PAD_PTD4__SDHC0_D6	0x43
+			MX8ULP_PAD_PTD3__SDHC0_D7	0x43
+			MX8ULP_PAD_PTD11__SDHC0_DQS	0x10042
+		>;
+	};
+};
-- 
2.25.1





[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux