U-Boot V2 Development (Barebox)

• Thread Index

• [PATCH v2 03/10] power: reset: reboot-mode: port syscon-reboot-mode support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 05/10] defaultenv: provide defaults for generic reboot modes
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 07/10] ARM: stm32mp: remove custom reboot mode logic from arch code
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 02/10] drivers: add reboot-mode infrastructure
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 09/10] power: reset: syscon-reboot-mode: support multi-word reboot modes
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 06/10] ARM: dts: stm32mp: setup syscon-reboot-mode on TAMP general purpose register
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 10/10] ARM: dts: i.MX6qdl: define BootROM reboot-mode on top of SRC_GPR{9, 10}
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 01/10] usbgadget: autostart: support delayed usbgadget.autostart=1
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 08/10] power: reset: reboot-mode: support multi-word magic
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 04/10] power: reset: reboot-mode: fix up node into boot device tree
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2 00/10] power: reset: add support for syscon reboot
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/2] lib: kasan: migrate Kconfig option to Debugging menu
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/2] lib: kasan: remove reference of non-existent test_kasan.o
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 0/9] barebox KASan support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] readkey: shrink table of known escape sequences in size
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] readkey: shrink table of known escape sequences in size
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] readkey: shrink table of known escape sequences in size
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] readkey: shrink table of known escape sequences in size
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] ARM: at91: support sama5 low level clock setup with oscillator
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] readkey: shrink table of known escape sequences in size
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 3/9] Kallsyms: Also resolve global variables
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] common: misc: support strerror(err) for all err <= MAX_ERRNO
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] rsa: fix print format specifiers in debug()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH v2] asm/debug_ll_ns16550.h: add parament divisor
  • From: Du Huanpeng <u74147@xxxxxxxxx>
• [PATCH v2 1/4] aiodev: Name channels with device instance name
  • From: Trent Piepho <trent.piepho@xxxxxxxxxxx>
• [PATCH v2 2/4] aiodev: am335x_adc: Driver for ADC on TI AM335x SoCs
  • From: Trent Piepho <trent.piepho@xxxxxxxxxxx>
• [PATCH v2 3/4] ARM: am335x: Enable TSC/ADC clock
  • From: Trent Piepho <trent.piepho@xxxxxxxxxxx>
• [PATCH v2 4/4] ARM: beaglebone: Enable ADC
  • From: Trent Piepho <trent.piepho@xxxxxxxxxxx>
• [PATCH v2 1/4] aiodev: Name channels with device instance name
  • From: Trent Piepho <trent.piepho@xxxxxxxxxxx>
• Re: [PATCH] MIPS: DEBUG_LL_UART_DIVISOR is 0, use a0 instead
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: DEBUG_LL_UART_DIVISOR is 0, use a0 instead
  • From: Du Huanpeng <u74147@xxxxxxxxx>
• Re: [PATCH 1/4] Makefile: add buildsystem version variable
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] of: Add common device tree register function
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• v2020.09.0
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/4] Makefile: add buildsystem version variable
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCH 3/4] common: globalvar: add variable for buildsystem_version_string
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCH 4/4] imd: add buildsystem version to metadata
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCH 2/4] common: print buildsystem version in barebox banner
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCH 2/2] usb: dwc3-of-simple: Use clk_bulk API
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/2] clk: Add clk_bulk_[get|put]_all()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] ARM: dts: imx8mq: use mmc aliases from upstream
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] ARM: dts: imx8mq: Use ddr controller node from upstream
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] usb: dwc3: Whitespace cleanup
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] clk_dump command: Allow printing a single clock
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] Regenerate defconfig files
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 3/9] Kallsyms: Also resolve global variables
  • From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
• Re: [PATCH v2 6/7] scripts/imx-image: relicense to allow distribution of binary linked with OpenSSL
  • From: Marcin Niestrój <m.niestroj@xxxxxxxxxxxxxxxx>
• Re: [PATCH 04/10] power: reset: reboot-mode: fix up node into boot device tree
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 04/10] power: reset: reboot-mode: fix up node into boot device tree
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/2] rsa: fix print format specifiers in debug()
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH 2/2] USB: musb: host: fix mismatched format specifier in dev_dbg()
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH] common: misc: support strerror(err) for all err <= MAX_ERRNO
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• Re: [PATCH v3 0/2] i.MX6ULL: set engine software for Secure Boot on HABv4
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 0/7] Relicense GPL programs for compatibility with OpenSSL
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] arch/x86: Replace license and copyright boilerplate by SPDX identfiers
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 8/9] Add KASan support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] README: add some commas for clarity
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] scripts: compiler.h: include <sys/types.h>
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] scripts: compiler.h: include <sys/types.h>
  • From: Robert Karszniewicz <avoidr@xxxxxxxxx>
• [PATCH] README: add some commas for clarity
  • From: Robert Karszniewicz <avoidr@xxxxxxxxx>
• [PATCH] ARM: dts: imx6ul: phycore: Add phyCORE i.MX6 UL with eMMC
  • From: Yunus Bas <y.bas@xxxxxxxxx>
• [PATCH 1/2] Regenerate defconfig files
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 2/2] x86/config/efi: drop DRIVER_SERIAL_NS16550
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH] arch/x86: Replace license and copyright boilerplate by SPDX identfiers
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 2/4] imx/esdctl: Define new helper macros to reduce board entry boilerplate
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 8/9] Add KASan support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 4/4] arm/boards: Add IMD_USED_OF for a few boards
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] mtd: spi-nor: cadence: fix csqpi corruption in cqspi_set_protocol
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] globalvar: allow running actions on set with globalvar_add_bool()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/1] bootm: Allow loading OP-TEE from FIT image
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] scripts/imx: fix typo "unkown" -> "unknown"
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] commands: setenv: support setenv dev.var=VAL syntax
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 8/9] Add KASan support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 4/9] Add constructor support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 0/9] barebox KASan support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 9/9] ARM: Add KASan support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/9] Add print_hex_dump kernel implementation
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 3/9] Kallsyms: Also resolve global variables
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 6/9] string: Add nokasan variants of default memcpy/memset
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 7/9] sandbox: rename KASan to ASan
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/9] Add _RET_IP_ macro
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 5/9] pbl: Alias memcpy and memset
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH v2 2/7] LICENSES: add used licenses to make spdxcheck happy
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v2 6/7] scripts/imx-image: relicense to allow distribution of binary linked with OpenSSL
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v2 5/7] scripts/rsatoc: relicense to allow distribution of binary linked with OpenSSL
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v2 7/7] scripts/mxsimage: relicense to allow distribution of binary linked with OpenSSL
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v2 3/7] scripts: convert imx-image and mxsimage to SPDX
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v2 4/7] LICENSES: add OpenSSL exception
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v2 0/7] Relicense GPL programs for compatibility with OpenSSL
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v2 1/7] scripts/spdxcheck: fix usage of non-existing variables
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH] clk: imx: clk-frac-pll: Use do_div for 64bit division
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 7/7] scripts/mxsimage: relicense to allow distribution of binary linked with OpenSSL
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 3/4] arm/boards: Convert a few boards to the new entry macros
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 2/4] imx/esdctl: Define new helper macros to reduce board entry boilerplate
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 4/4] arm/boards: Add IMD_USED_OF for a few boards
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 1/4] imx/esdctl: reorder some function declarations to be sorted by SoC
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: DEBUG_LL_UART_DIVISOR is 0, use a0 instead
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: DEBUG_LL_UART_DIVISOR is 0, use a0 instead
  • From: Du Huanpeng <u74147@xxxxxxxxx>
• Re: [PATCH 6/7] scripts/imx-image: relicense to allow distribution of binary linked with OpenSSL
  • From: Bastian Krause <bst@xxxxxxxxxxxxxx>
• Re: [PATCH 6/7] scripts/imx-image: relicense to allow distribution of binary linked with OpenSSL
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH v3 2/2] arch: arm: mach-imx: Add habv4 config file for i.MX6ULL
  • From: Maik Otto <m.otto@xxxxxxxxx>
• [PATCH v3 1/2] arch: arm: boards phytec: Split flash header for pcl063 with i.MX6Ul and i.MX6ULL
  • From: Maik Otto <m.otto@xxxxxxxxx>
• [PATCH v3 0/2] i.MX6ULL: set engine software for Secure Boot on HABv4
  • From: Maik Otto <m.otto@xxxxxxxxx>
• Re: [PATCH v2 2/2] arch: arm: mach-imx: Add habv4 config file for i.MX6ULL
  • From: Maik Otto <m.otto@xxxxxxxxx>
• [PATCH] mtd: spi-nor: cadence: fix csqpi corruption in cqspi_set_protocol
  • From: Ian Abbott <abbotti@xxxxxxxxx>
• [PATCH v2] kbuild: add dtbs target for building all dtbs of an ARCH
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 01/10] usbgadget: autostart: support delayed usbgadget.autostart=1
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] globalvar: allow running actions on set with globalvar_add_bool()
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 09/10] power: reset: syscon-reboot-mode: support multi-word reboot modes
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 06/10] ARM: dts: stm32mp: setup syscon-reboot-mode on TAMP general purpose register
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 03/10] power: reset: reboot-mode: port syscon-reboot-mode support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 05/10] defaultenv: provide defaults for generic reboot modes
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 08/10] power: reset: reboot-mode: support multi-word magic
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 02/10] drivers: add reboot-mode infrastructure
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 01/10] usbgadget: autostart: support delayed usbgadget.autostart=1
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 04/10] power: reset: reboot-mode: fix up node into boot device tree
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 07/10] ARM: stm32mp: remove custom reboot mode logic from arch code
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 10/10] ARM: dts: i.MX6qdl: define BootROM reboot-mode on top of SRC_GPR{9, 10}
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 00/10] power: reset: add support for syscon reboot modes
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 4/4] fs: free unused dentries
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 5/7] scripts/rsatoc: relicense to allow distribution of binary linked with OpenSSL
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 5/7] scripts/rsatoc: relicense to allow distribution of binary linked with OpenSSL
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• Re: [PATCH 4/7] LICENSES: add OpenSSL exception
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• Re: [PATCH 5/7] scripts/rsatoc: relicense to allow distribution of binary linked with OpenSSL
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• Re: [PATCH 2/7] LICENSES: add used licenses to make spdxcheck happy
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 5/7] scripts/rsatoc: relicense to allow distribution of binary linked with OpenSSL
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• Re: [PATCH 3/7] scripts: convert imx-image and mxsimage to SPDX
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• Re: [PATCH 2/7] LICENSES: add used licenses to make spdxcheck happy
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• Re: [PATCH 6/7] scripts/imx-image: relicense to allow distribution of binary linked with OpenSSL
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 6/7] scripts/imx-image: relicense to allow distribution of binary linked with OpenSSL
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 7/7] scripts/mxsimage: relicense to allow distribution of binary linked with OpenSSL
  • From: Marek Vasut <marex@xxxxxxx>
• [PATCH 0/7] Relicense GPL programs for compatibility with OpenSSL
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 2/7] LICENSES: add used licenses to make spdxcheck happy
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 6/7] scripts/imx-image: relicense to allow distribution of binary linked with OpenSSL
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 4/7] LICENSES: add OpenSSL exception
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 5/7] scripts/rsatoc: relicense to allow distribution of binary linked with OpenSSL
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 1/7] scripts/spdxcheck: fix usage of non-existing variables
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 3/7] scripts: convert imx-image and mxsimage to SPDX
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 7/7] scripts/mxsimage: relicense to allow distribution of binary linked with OpenSSL
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH] scripts/imx: fix typo "unkown" -> "unknown"
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 1/1] bootm: Allow loading OP-TEE from FIT image
  • From: Albert Schwarzkopf <a.schwarzkopf@xxxxxxxxx>
• [PATCH 0/1] bootm: Allow loading OP-TEE from FIT image
  • From: Albert Schwarzkopf <a.schwarzkopf@xxxxxxxxx>
• [PATCH v2] fixup! sandbox: hostfile: support registering images as barebox block devices
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 4/4] fs: free unused dentries
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] fixup! sandbox: hostfile: support registering images as barebox block devices
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 4/4] fs: free unused dentries
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] aiodev: Name channels with device instance name
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: dts: stm32mp: drop no longer needed PSCI version override
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] sandbox: unwind: fix indentation
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] README: update to reflect current state
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] globalvar: add globalvar_set function
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2] mci: mci-core: fix long lasting FIXMEs
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2] regulator: provide regulator_get_name() stub for !CONFIG_REGULATOR
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] scripts/kwbimage: Fix a build warning
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] common: restart: number unnamed restart handlers
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] mci: bcm2835: depend on sdhci
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] scripts/imx-usb-loader: Drop duplicate definition of ALIGN
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 07/10] openrisc: Add missing includes
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 01/10] ARM: dts: beaglebone: Remove unnecessary tps65217.dtsi
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 04/10] ARM: tx28: provide header file with function prototype
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 05/10] ARM: tegra20-colibri-iris: drop regulators node
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 09/10] scripts: tegra: Add missing include
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 10/10] ARM: zync: Fix include path
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 00/10] Compiler warning fixes
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 02/10] arm: Add prototypes for functions called from assembly
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 06/10] ARM: versatile: Remove unused function
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 03/10] openrisc: Add prototypes for functions called from assembly
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 08/10] openrisc: Make locally used functions static
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/2] commands: setenv: support setenv dev.var=VAL syntax
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/2] commands: setenv: allow use with hush shell
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] fixup! restart: give all restart handlers a descriptive name
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] mci: bcm2835: depend on sdhci
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• Re: [PATCH v2] regulator: provide regulator_get_name() stub for !CONFIG_REGULATOR
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• [PATCH] scripts/imx-usb-loader: Drop duplicate definition of ALIGN
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v2] regulator: provide regulator_get_name() stub for !CONFIG_REGULATOR
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH] scripts/kwbimage: Fix a build warning
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH] arm: dts: imx: Adjust pwm-cells
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] regulator: provide regulator_get_name() stub for !CONFIG_REGULATOR
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• Re: [PATCH 1/3] common: restart: number unnamed restart handlers
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 4/4] fs: free unused dentries
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v2] mci: mci-core: fix long lasting FIXMEs
  • From: Juergen Borleis <jbe@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] globalvar: add globalvar_set function
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• Re: [PATCH 3/5] mci: mci-core: fix long lasting FIXMEs
  • From: Juergen Borleis <jbe@xxxxxxxxxxxxxx>
• Re: [PATCH] mci: fix wrong sd/mmc/emmc card size computation for arch where char is signed
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] boot: ignore all spaces between boot targets
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/5] lib: string: retire deprecated strtok() in favor of reentrant strsep()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ls: align file size correctly on non-ARM 64-bit platforms
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] fixup! arm/cpu/*.S: Replace license and copyright boilerplate by SPDX identfiers
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 4/4] fs: free unused dentries
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/6] powerpc: Add missing includes
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 4/6] powerpc: Add prototypes for functions called from assembly
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 3/6] powerpc: Make locally used functions static
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 0/6] powerpc: Fix compiler warnings
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/6] powerpc: Add prototypes to header file
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 5/6] powerpc: Remove unused functions
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 6/6] powerpc: Add function prototypes for exception handlers
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 4/4] fastboot: only unset image, not loadaddr
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH 3/4] blspec: fix bootm_data initialization
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH 2/4] blspec: only reset variable locations, not paths
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH 1/4] globalvar: add globalvar_set function
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• Re: [PATCH] fixup! arm/cpu/*.S: Replace license and copyright boilerplate by SPDX identfiers
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 4/4] fs: free unused dentries
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] fixup! sandbox: implement actual sandbox reset via exec(2)
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH] sandbox: unwind: fix indentation
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH] ARM: dts: stm32mp: drop no longer needed PSCI version override
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH] fixup! arm/cpu/*.S: Replace license and copyright boilerplate by SPDX identfiers
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH 2/2] README: use lower-case barebox spelling
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/2] README: update to reflect current state
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 3/5] mci: mci-core: fix long lasting FIXMEs
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] fixup! mci: mci-core: add GPP support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] ls: align file size correctly on non-ARM 64-bit platforms
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] mci: fix wrong sd/mmc/emmc card size computation for arch where char is signed
  • From: Yann Sionneau <ysionneau@xxxxxxxxx>
• [PATCH] mci: fix wrong sd/mmc/emmc card size computation for arch where char is signed
  • From: Yann Sionneau <ysionneau@xxxxxxxxx>
• Re: [PATCH] mci: fix wrong sd/mmc/emmc card size computation for arch where char is signed
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] mci: fix wrong sd/mmc/emmc card size computation for arch where char is signed
  • From: Yann Sionneau <ysionneau@xxxxxxxxx>
• [PATCH 2/2] blspec: devicetree-overlay: don't warn on multiple delimiting spaces
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/2] boot: ignore all spaces between boot targets
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] fixup! mci: mci-core: add GPP support
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 3/5] mci: mci-core: fix long lasting FIXMEs
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] arm/cpu/*.S: Replace license and copyright boilerplate by SPDX identfiers
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] Documentation: boards: stm32mp: document eMMC boot configuration
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 0/5] treewide: delete code referencing unused headers
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH master 3/7] sandbox: support escaping commas in --image filenames
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 5/5] sandbox: hostfile: support registering images as barebox block devices
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/5] lib: string: retire deprecated strtok() in favor of reentrant strsep()
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/5] ls: don't print . and .. on recursive ls
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 4/5] sandbox: implement actual sandbox reset via exec(2)
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 3/5] sandbox: implement simple, ^C-interruptible, restart handler
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH master 1/3] clk: at91: sama5d2: fix buffer overflow of clk parent_names
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: barebox:ubi attach time
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] kconfig: update to Linux 5.9-rc2
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/4] fs: don't free device in remove callback
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/4] fs: Drop unnecessary dput()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 3/4] fs: Fix use after free
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 4/4] fs: free unused dentries
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] arm/cpu/*.S: Replace license and copyright boilerplate by SPDX identfiers
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] aiodev: Name channels with device instance name
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] imd: imd_calculate_crc32: initialize imd_crc to NULL
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] mfd: stpmic1: warn if reset reason detection fails
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/5] commands: mmc_extcsd: print_field: fix 32 bit overflow
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH master 3/7] sandbox: support escaping commas in --image filenames
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH master 5/7] sandbox: fix SANDBOX_UNWIND dependency to be KASAN only
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH master 7/7] common: ubsan: replace pr_err with printf
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH master 4/7] readkey: fix buffer overflow handling longer escape sequences
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH master 2/7] sandbox: add_image: support mmaping block devices on 32-bit hosts
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH master 1/7] sandbox: hostfile: error out if file couldn't be opened
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH master 6/7] fs: don't free device in remove callback
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 0/5] treewide: delete code referencing unused headers
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] readkey: shrink table of known escape sequences in size
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] globalvar: add set_single function
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] arch: arm: mach-imx: Add habv4 config file for i.MX6ULL
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] common: bootm: Add missing check of fit_open_image() return code
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] pinctrl-single: Support 2 pinctrl-cells in ,pins mode
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] Documentation: user: fix referenced filename
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] fixup! workqueues: Add support for delayed work
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 4/4] fastboot: only unset image, not loadaddr
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH 1/4] globalvar: add set_single function
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH 3/4] blspec: fix bootm_data initialization
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH] iotmaxx: gw4100: WDOG_ANY as GPIO output
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH 2/4] blspec: only reset variable locations, not paths
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• Re: [PATCH] iotmaxx: gw4100: WDOG_ANY as GPIO output
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• [PATCH] fixup! workqueues: Add support for delayed work
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• Re: [PATCH 1/4] aiodev: Name channels with device instance name
  • From: Trent Piepho <trent.piepho@xxxxxxxxxxx>
• [PATCH] Documentation: user: fix referenced filename
  • From: Thorsten Scherer <tk-scherer@xxxxxxxxxxx>
• Re: [PATCH] MIPS: DEBUG_LL_UART_DIVISOR is 0, use a0 instead
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] MIPS: loongson1: enable to run from spi flash
  • From: Du Huanpeng <u74147@xxxxxxxxx>
• [PATCH] MIPS: DEBUG_LL_UART_DIVISOR is 0, use a0 instead
  • From: Du Huanpeng <u74147@xxxxxxxxx>
• [PATCH v2 2/2] arch: arm: mach-imx: Add habv4 config file for i.MX6ULL
  • From: Maik Otto <m.otto@xxxxxxxxx>
• [PATCH v2 1/2] arch: arm: boards phytec: Split flash header for pcl063 with i.MX6Ul and i.MX6ULL
  • From: Maik Otto <m.otto@xxxxxxxxx>
• [PATCH v2 0/2] i.MX6ULL: set engine software for Secure Boot on HABv4
  • From: Maik Otto <m.otto@xxxxxxxxx>
• Re: [PATCH 1/4] aiodev: Name channels with device instance name
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 3/4] ARM: am335x: Enable TSC/ADC clock
  • From: Trent Piepho <trent.piepho@xxxxxxxxxxx>
• [PATCH 4/4] ARM: beaglebone: Enable ADC
  • From: Trent Piepho <trent.piepho@xxxxxxxxxxx>
• [PATCH 2/4] aiodev: am335x_adc: Driver for ADC on TI AM335x SoCs
  • From: Trent Piepho <trent.piepho@xxxxxxxxxxx>
• [PATCH 1/4] aiodev: Name channels with device instance name
  • From: Trent Piepho <trent.piepho@xxxxxxxxxxx>
• [PATCH 5/5] mci: mci-core: add GPP support
  • From: Juergen Borleis <jbe@xxxxxxxxxxxxxx>
• [PATCH 1/5] commands: mmc_extcsd: print_field: fix 32 bit overflow
  • From: Juergen Borleis <jbe@xxxxxxxxxxxxxx>
• [PATCH 3/5] mci: mci-core: fix long lasting FIXMEs
  • From: Juergen Borleis <jbe@xxxxxxxxxxxxxx>
• [PATCH 4/5] mci: kconfig: explain what boot partitions are
  • From: Juergen Borleis <jbe@xxxxxxxxxxxxxx>
• [PATCH 2/5] commands: mmc_extcsd: print_field: fix layout
  • From: Juergen Borleis <jbe@xxxxxxxxxxxxxx>
• [PATCH] common: bootm: Add missing check of fit_open_image() return code
  • From: Albert Schwarzkopf <a.schwarzkopf@xxxxxxxxx>
• [PATCH] pinctrl-single: Support 2 pinctrl-cells in ,pins mode
  • From: Trent Piepho <tpiepho@xxxxxxxxx>
• Re: [PATCH] MIPS: asm/debug_ll_ns16550.h: add nop in delay slot
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH 1/2] arch: arm: boards phytec: Split flash header for pcl063 with i.MX6Ul and i.MX6ULL
  • From: Maik Otto <m.otto@xxxxxxxxx>
• [PATCH 2/2] arch: arm: mach-imx: Add habv4 config file for i.MX6ULL
  • From: Maik Otto <m.otto@xxxxxxxxx>
• [PATCH 0/2] i.MX6ULL: set engine software for Secure Boot on HABv4
  • From: Maik Otto <m.otto@xxxxxxxxx>
• [PATCH] MIPS: asm/debug_ll_ns16550.h: add nop in delay slot
  • From: Du Huanpeng <u74147@xxxxxxxxx>
• Re: [PATCH] imd: imd_calculate_crc32: initialize imd_crc to NULL
  • From: Hubert Feurstein <h.feurstein@xxxxxxxxx>
• [PATCH] imd: imd_calculate_crc32: initialize imd_crc to NULL
  • From: Hubert Feurstein <h.feurstein@xxxxxxxxx>
• [PATCH 2/2] ARM: stm32mp: enable mmc_extcsd in defconfig
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/2] mfd: stpmic1: warn if reset reason detection fails
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH master 1/3] clk: at91: sama5d2: fix buffer overflow of clk parent_names
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH master 2/3] ARM: at91: fix link error when CONFIG_BOOTM=n
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH master 3/3] ARM: at91: sama5d27-giantboard: fix multi-image compatibility
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• RE: barebox:ubi attach time
  • From: "Barbier, Renaud" <renaud.barbier@xxxxxxxxx>
• Re: [PATCH] mci: core: add device parameter for eMMC boot ack
  • From: Jan Lübbe <jlu@xxxxxxxxxxxxxx>
• [PATCH] Documentation: boards: stm32mp: document eMMC boot configuration
  • From: Bastian Krause <bst@xxxxxxxxxxxxxx>
• Re: [PATCH] commands: import memtester 4.3.0 from Debian GNU/Linux
  • From: Peter Mamonov <pmamonov@xxxxxxxxx>
• Re: [PATCH] commands: import memtester 4.3.0 from Debian GNU/Linux
  • From: Peter Mamonov <pmamonov@xxxxxxxxx>
• Re: [PATCH v2] sandbox: add a minimal defconfig to build only the host tools
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• Re: [PATCH v2] sandbox: add a minimal defconfig to build only the host tools
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [RFC] ARM: run barebox on STM32F429 MCU
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• Re: [PATCH] commands: import memtester 4.3.0 from Debian GNU/Linux
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2] sandbox: add a minimal defconfig to build only the host tools
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] common: remove negative dependency on SANDBOX for IMD_TARGET
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] kconfig: update to Linux 5.9-rc2
  • From: Masahiro Yamada <masahiroy@xxxxxxxxxx>
• Re: [PATCH] commands: import memtester 4.3.0 from Debian GNU/Linux
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• [PATCH] commands: import memtester 4.3.0 from Debian GNU/Linux
  • From: Peter Mamonov <pmamonov@xxxxxxxxx>
• Re: [PATCH v2] arm: imx: Select RELOCATABLE on IMX_MULTI_BOARDS
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2] serial: imx: set CTS if DT property "linux, rs485-enabled-at-boot-time" is present
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/2] treewide: s/filed/field/
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/2] treewide: s/filed/failed/
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v5 00/12] prepare Protonic board code for mainline
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH v2] sandbox: add a minimal defconfig to build only the host tools
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• [PATCH] common: remove negative dependency on SANDBOX for IMD_TARGET
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• [PATCH] sandbox: add a minimal defconfig to build only the host tools
  • From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] video: add simple, transparent, bridge implementation
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] ARM: imx_v8_defconfig: Enabel realtek phy
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] ddr: imx: Cleanup debug messages
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] clk: imx8mm: fix CPU clock
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: NULL pointer deref crash on barebox 2020.08.0
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/2] ARM: i.MX8M boards: always set up UART
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/2] ARM: imx8m: Make uart setup function name more generic
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/2] clk: imx: remove leftover debug printk's from pll14xx
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 2/2] clk: imx8mm: fix CPU clock
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] video: add simple, transparent, bridge implementation
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Re: NULL pointer deref crash on barebox 2020.08.0
  • From: Giorgio Dal Molin <giorgio.nicole@xxxxxxxx>
• v2020.08.1
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH v2] arm: imx: Select RELOCATABLE on IMX_MULTI_BOARDS
  • From: Lars Pedersen <lapeddk@xxxxxxxxx>
• Re: NULL pointer deref crash on barebox 2020.08.0
  • From: Giorgio Dal Molin <giorgio.nicole@xxxxxxxx>
• Re: [PATCH] Documentation: update for loongson1 board
  • From: Du Huanpeng <u74147@xxxxxxxxx>
• Re: NULL pointer deref crash on barebox 2020.08.0
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v3] bootm: add global.bootm.root_dev env var for booting via PARTUUID
  • From: Robert Karszniewicz <r.karszniewicz@xxxxxxxxx>
• Re: NULL pointer deref crash on barebox 2020.08.0
  • From: Giorgio Dal Molin <giorgio.nicole@xxxxxxxx>
• Re: [PATCH 2/3] video: ipuv3: parallel-display: support of_graph binding
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: NULL pointer deref crash on barebox 2020.08.0
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: NULL pointer deref crash on barebox 2020.08.0
  • From: Giorgio Dal Molin <giorgio.nicole@xxxxxxxx>
• Re: [PATCH 1/3] video: add simple, transparent, bridge implementation
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: NULL pointer deref crash on barebox 2020.08.0
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• NULL pointer deref crash on barebox 2020.08.0
  • From: Giorgio Dal Molin <giorgio.nicole@xxxxxxxx>
• Re: [PATCH v2] watchdog: fix watchdog_set_timeout breakage for drivers like imxwd
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH v5 00/12] prepare Protonic board code for mainline
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v5 06/12] ARM: dts: unify barebox and barebox, env partitions for all Protonic boards
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v5 05/12] ARM: protonic-imx6: port Protonic specific board code
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v5 04/12] of: of_device_get_match_compatible() helper
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v5 12/12] ARM: dts: protonic: lanmcu: add uart-has-rtscts to enable rs485 functionality
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v5 09/12] ARM: dts: protonic: add fixed clock for the FEC node
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v5 11/12] ARM: dts: protonic: properly define PHY nodes on lanmcu and plym2m boards
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v5 02/12] gpiolib: add gpio_array_to_id helper to get ID out of GPIO array
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v5 03/12] common: console_common: add of_console_get_by_alias() helper
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v5 07/12] ARM: dts: imx6q-prti6q: add pstore/ramoops node
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v5 08/12] ARM: dts: protonic: lanmcu: add eMMC partition table
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v5 10/12] ARM: dts: protonic: lanmcu: use UART_CTS instead of GPIO based CTS
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v5 01/12] of: base: register DT root as device
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v2] serial: imx: set CTS if DT property "linux, rs485-enabled-at-boot-time" is present
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH] Documentation: update for loongson1 board
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v3] bootm: add global.bootm.root_dev env var for booting via PARTUUID
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 7/7] clk: imx8mp: update clk driver from Linux kernel
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 3/7] clk: imx-cpu: Add missing CLK_IS_CRITICAL
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 4/7] clk: imx. clk-composite-8m: Update from Linux Kernel
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 6/7] clk: imx: Add Linux function names
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/7] clk: imx: clk-pll14xx: remove debug leftover
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/7] clk: imx: make string arrays const char * const *
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 5/7] clk: imx: Add imx_clk_gate4_flags
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] clk: imx-imx8mp: Mark arm_a53_core clk as critical
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v3] bootm: add global.bootm.root_dev env var for booting via PARTUUID
  • From: Robert Karszniewicz <r.karszniewicz@xxxxxxxxx>
• [PATCH v2] watchdog: fix watchdog_set_timeout breakage for drivers like imxwd
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v4 5/7] ARM: protonic-imx6: port Protonic specific board code
  • From: David Jander <david@xxxxxxxxxxx>
• Re: [PATCH] watchdog: fix watchdog_set_timeout breakage for drivers like imxwd
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] watchdog: fix watchdog_set_timeout breakage for drivers like imxwd
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH v2] Documentation: update for loongson1 board
  • From: Du Huanpeng <u74147@xxxxxxxxx>
• Re: [PATCH] watchdog: fix watchdog_set_timeout breakage for drivers like imxwd
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] watchdog: fix watchdog_set_timeout breakage for drivers like imxwd
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/5] scripts: remove redundant setupmbr addition to subdir-
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] arm: imx: RELOCATABLE default yes on IMX_MULTI_BOARDS
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] Documentation: update for loongson1 board
  • From: Du Huanpeng <u74147@xxxxxxxxx>
• Re: [PATCH v4 5/7] ARM: protonic-imx6: port Protonic specific board code
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v1] serial: imx: set CTS if DT property "linux, rs485-enabled-at-boot-time" is present
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] watchdog: fix watchdog_set_timeout breakage for drivers like imxwd
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 5/5] kbuild: introduce hostprogs-always-y and userprogs-always-y
  • From: Masahiro Yamada <masahiroy@xxxxxxxxxx>
• [PATCH 3/5] sandbox: add sandbox.dtb to always-y
  • From: Masahiro Yamada <masahiroy@xxxxxxxxxx>
• [PATCH 1/5] scripts: remove redundant setupmbr addition to subdir-
  • From: Masahiro Yamada <masahiroy@xxxxxxxxxx>
• [PATCH 4/5] kbuild: sync the top level Kbuild file with Linux
  • From: Masahiro Yamada <masahiroy@xxxxxxxxxx>
• [PATCH 2/5] kvx,riscv: remove unused $(dtb-y) assignment
  • From: Masahiro Yamada <masahiroy@xxxxxxxxxx>
• [PATCH v1] serial: imx: set CTS if DT property "linux, rs485-enabled-at-boot-time" is present
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH] libfile: copy_file: Fix ftruncate called on device files
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] video: ssd1307fb: Honour reset GPIO polarity
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] arm: imx: RELOCATABLE default yes on IMX_MULTI_BOARDS
  • From: Lars Pedersen <lapeddk@xxxxxxxxx>
• Re: [PATCH 2/3] ARM: vexpress: allow to select debug UART address
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] fixup! of: base: register DT root as device
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• v2020.08.0
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH v4 2/7] gpiolib: add gpio_array_to_id helper to get ID out of GPIO array
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v4 5/7] ARM: protonic-imx6: port Protonic specific board code
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v4 0/7] prepare Protonic board code for mainline
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v4 1/7] of: base: register DT root as device
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v4 4/7] of: of_device_get_match_compatible() helper
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v4 3/7] common: console_common: add of_console_get_by_alias() helper
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v4 6/7] ARM: dts: unify barebox and barebox, env partitions for all Protonic boards
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v4 7/7] ARM: dts: imx6q-prti6q: add pstore/ramoops node
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH v3 4/6] ARM: protonic-imx6: port Protonic specific board code
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] video: add simple, transparent, bridge implementation
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Re: [PATCH v1] string: add sanity check to the strcmp() and strncmp()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] of: base: move memory init from DT to initcall
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] ARM: vexpress: set stdout path
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 3/3] video: simple-panel: don't error out on unhandled ioctl command
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/3] video: ipuv3: parallel-display: support of_graph binding
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/3] video: add simple, transparent, bridge implementation
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH fixup v1] of: base: register DT root as device
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: barebox:ubi attach time
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] of: base: move memory init from DT to initcall
  • From: Lucas Stach <dev@xxxxxxxxxx>
• [PATCH 1/3] ARM: vexpress: set stdout path
  • From: Lucas Stach <dev@xxxxxxxxxx>
• [PATCH 2/3] ARM: vexpress: allow to select debug UART address
  • From: Lucas Stach <dev@xxxxxxxxxx>
• [PATCH 3/3] ARM: vexpress: enable KALLSYMS in defconfig
  • From: Lucas Stach <dev@xxxxxxxxxx>
• barebox:ubi attach time
  • From: "Barbier, Renaud" <renaud.barbier@xxxxxxxxx>
• Re: [PATCH v6] FIT: Parse `load` and `entry` addresses.
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] Revert "usb: host: ehci: Use to USBSTS to wait for transfer completion"
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v4 00/13] usb: dwc2: Add host and gadget driver
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v4 02/13] usb: dwc2: Add host controller driver
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v4 02/13] usb: dwc2: Add host controller driver
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• Re: [PATCH v4 02/13] usb: dwc2: Add host controller driver
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v3 4/6] ARM: protonic-imx6: port Protonic specific board code
  • From: David Jander <david@xxxxxxxxxxx>
• [PATCH v3 3/6] of: of_device_get_match_compatible() helper
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH 16/20] fastboot net: implement fastboot over UDP
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 13/20] fastboot: Warn when cb_download is called with file still open
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 15/20] fastboot: init list head in common
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 11/20] globalvar: Add helper for deprecated variable names
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 01/20] Introduce slices
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 19/20] fs: Warn when filesystem operations are called from a poller
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 17/20] usb: fastboot: execute commands in command context
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 12/20] fastboot: rename usbgadget.fastboot_* variables to fastboot.*
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 20/20] Documentation: Add document about background execution in barebox
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 08/20] net: Call net_poll() in a poller
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 02/20] Add workqueues
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 10/20] usbnet: Be more friendly in the receive path
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 18/20] Add WARN_ONCE() macro
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 14/20] fastboot: Add fastboot_abort()
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 04/20] net: Add a slice to struct eth_device
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 05/20] net: mdiobus: Add slice
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 03/20] ratp: Switch to workqueues
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 09/20] net: reply to ping requests
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH v6 00/20] Slices and fastboot over UDP
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 07/20] usbnet: Add slice
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 06/20] usb: Add a slice to usb host controllers
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH v3 0/6] prepare Protonic board code for mainline
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v3 1/6] gpiolib: add gpio_array_to_id helper to get ID out of GPIO array
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v3 6/6] ARM: dts: imx6q-prti6q: add pstore/ramoops node
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v3 2/6] common: console_common: add of_console_get_by_alias() helper
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v3 5/6] ARM: dts: unify barebox and barebox, env partitions for all Protonic boards
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v3 4/6] ARM: protonic-imx6: port Protonic specific board code
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v1] string: add sanity check to the strcmp() and strncmp()
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH 17/21] fastboot net: implement fastboot over UDP
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH fixup v1] of: base: register DT root as device
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH fixup v1] of: base: register DT root as device
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH fixup v1] of: base: register DT root as device
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH fixup v1] of: base: register DT root as device
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH fixup v1] of: base: register DT root as device
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH fixup v1] of: base: register DT root as device
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v6] FIT: Parse `load` and `entry` addresses.
  • From: Christian Mauderer <christian.mauderer@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH fixup v1] of: base: register DT root as device
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: Enable Display/Splash on Phycore am335x with barebox 2020.01.0
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH fixup v1] of: base: register DT root as device
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v5] FIT: Parse `load` and `entry` addresses.
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v5] FIT: Parse `load` and `entry` addresses.
  • From: Christian Mauderer <christian.mauderer@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5] FIT: Parse `load` and `entry` addresses.
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: Enable Display/Splash on Phycore am335x with barebox 2020.01.0
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] dtc_cpp: allow to pass options per target
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH fixup v1] of: base: register DT root as device
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/4] ARM: imx8mm: select FIRMWARE_IMX_LPDDR4_PMU_TRAIN from IMX8MM_EVK
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: Layerscape: TQMLS1046a: remove ddr calc code
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH fixup v1] of: base: register DT root as device
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH] Revert "usb: host: ehci: Use to USBSTS to wait for transfer completion"
  • From: Christian Eggers <ceggers@xxxxxxx>
• [PATCH] ARM: Layerscape: TQMLS1046a: remove ddr calc code
  • From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
• Enable Display/Splash on Phycore am335x with barebox 2020.01.0
  • From: "Koelle, Holger" <Holger.Koelle@xxxxxxxxxxxx>
• Re: [PATCH v5] FIT: Parse `load` and `entry` addresses.
  • From: Christian Mauderer <christian.mauderer@xxxxxxxxxxxxxxxxxx>
• [PATCH v4 02/13] usb: dwc2: Add host controller driver
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [PATCH v4 12/13] usb: dwc2: Add gadget driver
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [PATCH v4 01/13] Revert "usb: Add dwc2 host driver"
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [PATCH v4 04/13] usb: dwc2: Rework roothub interface
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [PATCH v4 13/13] usb: dwc2: Use register_otg_device
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [PATCH v4 11/13] usb: dwc2: Add structure for gadget driver
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [PATCH v4 10/13] usb: dwc2: Add function to flush tx fifo
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [PATCH v4 09/13] usb: dwc2: host: Rewrite dwc2_hc_init
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [PATCH v4 08/13] usb: dwc2: host: Fix toggle reset
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [PATCH v4 03/13] usb: dwc2: host: Read dr_mode from device tree
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [PATCH v4 05/13] usb: dwc2: Rework timeout
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [PATCH v4 07/13] usb: dwc2: host: Dynamic fifo size support from Linux
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [PATCH v4 06/13] usb: dwc2: host: Handle dma mapping errors
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [PATCH v4 00/13] usb: dwc2: Add host and gadget driver
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• Re: [PATCH v4 2/3] of: base: register DT root as device
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] console_countdown: Add CR as valid return key
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 00/13] prepare Protonic board code for mainline
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 12/13] of: add barebox-serial driver
  • From: David Jander <david@xxxxxxxxxxx>
• [PATCH v2 4/4] nvmem: ocotp: add support for i.MX8MM
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH v2 3/4] ARM: nxp-imx8mm-evk: always set up UART
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH v2 1/4] ARM: imx8mm: select FIRMWARE_IMX_LPDDR4_PMU_TRAIN from IMX8MM_EVK
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH v2 2/4] ARM: imx8m: make debug UART selection available on i.MX8MM/MP
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH v3 14/14] usb: dwc2: Add ulpi phy function
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• Re: [PATCH] console_countdown: Add CR as valid return key
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• Re: [PATCH v2 12/13] of: add barebox-serial driver
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH v2 12/13] of: add barebox-serial driver
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v1 11/11] ARM: dts: imx6q-prti6q: add barebox.serial node
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v5] FIT: Parse `load` and `entry` addresses.
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] arm: baltos: export DIP switch value
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] kvx: exclude dtb from malloc zone
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: Some USB memory sticks not (fully) recognized
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: Some USB memory sticks not (fully) recognized
  • From: Christian Eggers <ceggers@xxxxxxx>
• Re: [PATCH v3 14/14] usb: dwc2: Add ulpi phy function
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v3 02/14] usb: dwc2: Add host controller driver
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v3 00/14] usb: dwc2: Add host and gadget driver
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: boards: phytec-som-imx6: Add mmc and emmc-boot bbu update handler
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/5] clk: imx7: add IMX7D_OCOTP_CLK
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2] arm: baltos: add environment node
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] console_countdown: Add CR as valid return key
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] treewide: remove stale instances of struct device
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: Some USB memory sticks not (fully) recognized
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH v3] bootm: add global.bootm.root_dev env var for booting via PARTUUID
  • From: Robert Karszniewicz <r.karszniewicz@xxxxxxxxx>
• [PATCH v2] bootm: add global.bootm.root_dev env var for booting via PARTUUID
  • From: Robert Karszniewicz <r.karszniewicz@xxxxxxxxx>
• [PATCH] bootm: add global.bootm.root_dev env var for booting via PARTUUID
  • From: Robert Karszniewicz <r.karszniewicz@xxxxxxxxx>
• Re: Some USB memory sticks not (fully) recognized
  • From: Christian Eggers <ceggers@xxxxxxx>
• Re: [PATCH 04/11] fs: free inodes we no longer need
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/3] fs: squashfs: Do not free root inode
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 1/3] fs: squashfs: set s_op in time
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 3/3] fs: Use iget_locked() rather than squashfs specific function
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 0/3] squashfs: Fix current master
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [RFC PATCH v2 3/3] bootm: handle global.bootm.root_dev
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 0/2] ARM: i.MX: Add support for IMX7 based board
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] ARM: i.MX: Add atlascopco sxb board
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3] ARM: i.MX: setup ENET_CLK_SEL in imx6_init for every imx6q/imx6d
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] ARM: i.MX: Add atlascopco sxb board
  • From: Anees Rehman <anees.r3hman@xxxxxxxxx>
• Re: Getting serial console output on new imx7d tqma7 board UART4
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3] ARM: i.MX: setup ENET_CLK_SEL in imx6_init for every imx6q/imx6d
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] spi: add coredevice_spi_driver macro as well
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] image: Convert the IH_... values to enums
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH] spi: add coredevice_spi_driver macro as well
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Some USB memory sticks not (fully) recognized
  • From: Christian Eggers <ceggers@xxxxxxx>
• Re: [PATCH v2 2/2] ARM: i.MX: Add atlascopco sxb board
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH 3/3] ARM: i.MX: setup ENET_CLK_SEL in imx6_init for every imx6q/imx6d
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH 2/3] ARM: imx6ul: add fec bits to GPR syscon definition
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH 1/3] ARM: i.MX6 dtsi: add enet_out clock
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: Getting serial console output on new imx7d tqma7 board UART4
  • From: Lars Pedersen <lapeddk@xxxxxxxxx>
• Re: Getting serial console output on new imx7d tqma7 board UART4
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: Getting serial console output on new imx7d tqma7 board UART4
  • From: Lars Pedersen <lapeddk@xxxxxxxxx>
• [PATCH v2 11/13] ARM: protonic-imx6: port Protonic specific board code
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v2 07/13] net: fec_imx: use of_get_mac_address() to get mac address out of DT
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v2 09/13] gpiolib: add gpio_array_to_id helper to get ID out of GPIO array
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v2 08/13] of: of_device_get_match_compatible() helper
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v2 10/13] common: console_common: add of_console_get_by_alias() helper
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v2 05/13] net: port nvmem_get_mac_address() from linux kernel
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v2 06/13] of: of_net: sync of_get_mac_address() with latest kernel version
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v2 12/13] of: add barebox-serial driver
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v2 03/13] of: base: register DT root as device
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v2 13/13] ARM: dts: imx6q-prti6q: add barebox, serial-number node
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v2 01/13] ARM: dts: imx6q-prti6q: fix PHY register
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v2 04/13] ARM: embest-riotboard: port board file to the driver model
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v2 00/13] prepare Protonic board code for mainline
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v2 02/13] ARM: dts: imx6: vicut1: fix network support
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [RFC PATCH v2 3/3] bootm: handle global.bootm.root_dev
  • From: Robert Karszniewicz <r.karszniewicz@xxxxxxxxx>
• [RFC PATCH v2 1/3] bootm: add env var root_dev
  • From: Robert Karszniewicz <r.karszniewicz@xxxxxxxxx>
• [RFC PATCH v2 2/3] globalvar: add bootm.root_dev
  • From: Robert Karszniewicz <r.karszniewicz@xxxxxxxxx>
• [RFC PATCH v2 0/3] Introduce global.bootm.root_dev env var for booting via PARTUUID
  • From: Robert Karszniewicz <r.karszniewicz@xxxxxxxxx>
• [RFC PATCH v2 3/3] bootm: handle global.bootm.root_dev
  • From: Robert Karszniewicz <r.karszniewicz@xxxxxxxxx>
• Re: Getting serial console output on new imx7d tqma7 board UART4
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: Getting serial console output on new imx7d tqma7 board UART4
  • From: Lars Pedersen <lapeddk@xxxxxxxxx>
• Re: Getting serial console output on new imx7d tqma7 board UART4
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] image: Convert the IH_... values to enums
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH] riscv: Makefile: make it possible to use riscv64 compiler
  • From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
• [PATCH v2 2/2] ARM: i.MX: Add atlascopco sxb board
  • From: Anees Rehman <anees.r3hman@xxxxxxxxx>
• [PATCH v2 1/2] mci: imx-esdhc-pbl: Add support for IMX7
  • From: Anees Rehman <anees.r3hman@xxxxxxxxx>
• [PATCH v2 0/2] ARM: i.MX: Add support for IMX7 based board
  • From: Anees Rehman <anees.r3hman@xxxxxxxxx>
• Re: Getting serial console output on new imx7d tqma7 board UART4
  • From: Lars Pedersen <lapeddk@xxxxxxxxx>
• Re: Getting serial console output on new imx7d tqma7 board UART4
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: Getting serial console output on new imx7d tqma7 board UART4
  • From: Lars Pedersen <lapeddk@xxxxxxxxx>
• Re: Getting serial console output on new imx7d tqma7 board UART4
  • From: Lars Pedersen <lapeddk@xxxxxxxxx>
• Re: [PATCH v1 09/11] ARM: protonic-imx6: port protonic specific board code
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH v1 11/11] ARM: dts: imx6q-prti6q: add barebox.serial node
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH v1 06/11] net: fec_imx: use of_get_mac_address() to get mac address out of DT
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH v1 08/11] gpiolib: add gpio_array_to_id helper to get ID out of GPIO array
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH] treewide: remove stale instances of struct device
  • From: Masahiro Yamada <masahiroy@xxxxxxxxxx>
• Re: [PATCH 2/2] ARM: i.MX: Add atlascopco sxb board
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/2] ARM: i.MX: Add atlascopco sxb board
  • From: Anees Rehman <anees.r3hman@xxxxxxxxx>
• [PATCH 1/2] mci: imx-esdhc-pbl: Add support for IMX7
  • From: Anees Rehman <anees.r3hman@xxxxxxxxx>
• [PATCH 0/2] ARM: i.MX: Add support for IMX7 based board
  • From: Anees Rehman <anees.r3hman@xxxxxxxxx>
• Re: [PATCH 04/11] fs: free inodes we no longer need
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: Getting serial console output on new imx7d tqma7 board UART4
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] USB: gadget: Add serialnumber device parameter
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] startup: Add missing newline to notice message
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] i2c: sync i2c_parse_fw_timings() with upstream
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: at91: pass along bootsource to netbooted barebox
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] ratp: Abort console_countdown when activated
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] treewide: remove stale instances of struct device
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v1 11/11] ARM: dts: imx6q-prti6q: add barebox.serial node
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v1 09/11] ARM: protonic-imx6: port protonic specific board code
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v1 08/11] gpiolib: add gpio_array_to_id helper to get ID out of GPIO array
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v1 06/11] net: fec_imx: use of_get_mac_address() to get mac address out of DT
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] add untar command
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 2/4] ARM: imx8m: make debug UART selection available on i.MX8MM
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] gpio: get function returns masked register value
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH master] i2c: stm32: support new st,stm32mp15-i2c compatible
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] scripts/rsatoc: fix printing of error message, if environment variable doen't contain a path
  • From: Sascha Hauer <sha@xxxxxxxxxxxxxx>
• Re: [PATCH] Documentation/sandbox: fix code block
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: stm32mp: add support for Seeed Odyssey board
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] ARM: socfpga: achilles: remove unused barebox,bootstate node
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: Getting serial console output on new imx7d tqma7 board UART4
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: Getting serial console output on new imx7d tqma7 board UART4
  • From: Lars Pedersen <lapeddk@xxxxxxxxx>
• Re: [PATCH] kvx: exclude dtb from malloc zone
  • From: Clément Leger <cleger@xxxxxxxxx>
• [PATCH] add untar command
  • From: yegorslists@xxxxxxxxxxxxxx
• [PATCH] ARM: socfpga: achilles: remove unused barebox,bootstate node
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• [PATCH] ARM: stm32mp: add support for Seeed Odyssey board
  • From: Ahmad Fatoum <ahmad@xxxxxx>
• Re: [PATCH] net:fec: fixed unaligned access and stack corruption
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH] net:fec: fixed unaligned access and stack corruption
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH] net:fec: fixed unaligned access and stack corruption
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: Getting serial console output on new imx7d tqma7 board UART4
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: Getting serial console output on new imx7d tqma7 board UART4
  • From: Lars Pedersen <lapeddk@xxxxxxxxx>
• Re: Getting serial console output on new imx7d tqma7 board UART4
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: Getting serial console output on new imx7d tqma7 board UART4
  • From: Lars Pedersen <lapeddk@xxxxxxxxx>
• Re: [PATCH v5] FIT: Parse `load` and `entry` addresses.
  • From: Christian Mauderer <christian.mauderer@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5] FIT: Parse `load` and `entry` addresses.
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: Getting serial console output on new imx7d tqma7 board UART4
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Getting serial console output on new imx7d tqma7 board UART4
  • From: Lars Pedersen <lapeddk@xxxxxxxxx>
• [PATCH] Documentation/sandbox: fix code block
  • From: yegorslists@xxxxxxxxxxxxxx
• [PATCH] scripts/rsatoc: fix printing of error message, if environment variable doen't contain a path
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v5] FIT: Parse `load` and `entry` addresses.
  • From: Christian Mauderer <christian.mauderer@xxxxxxxxxxxxxxxxxx>
• [PATCH 4/4] nvmem: ocotp: add support for i.MX8MM
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 3/4] ARM: nxp-imx8mm-evk: always set up UART
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 2/4] ARM: imx8m: make debug UART selection available on i.MX8MM
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 1/4] ARM: imx8mm: select FIRMWARE_IMX_LPDDR4_PMU_TRAIN from IMX8MM_EVK
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH] gpio: get function returns masked register value
  • From: Renaud Barbier <renaud.barbier@xxxxxxxxx>
• RE: gpio generic driver
  • From: "Barbier, Renaud" <renaud.barbier@xxxxxxxxx>
• Re: gpio generic driver
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• tar command support
  • From: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx>
• gpio generic driver
  • From: "Barbier, Renaud" <renaud.barbier@xxxxxxxxx>
• [PATCH v1 09/11] ARM: protonic-imx6: port protonic specific board code
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v1 10/11] of: add barebox-serial driver
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v1 11/11] ARM: dts: imx6q-prti6q: add barebox.serial node
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v1 05/11] of: of_net: sync of_get_mac_address() with latest kernel version
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v1 03/11] ARM: embest-riotboard: port board file to the driver model
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v1 04/11] net: port nvmem_get_mac_address() from linux kernel
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v1 08/11] gpiolib: add gpio_array_to_id helper to get ID out of GPIO array
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v1 07/11] of: of_device_get_match_compatible() helper
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v1 01/11] ARM: dts: imx6q-prti6q: fix PHY register
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v1 02/11] of: base: register DT root as device
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v1 00/11] prepare Protonic board code for mainline
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v1 06/11] net: fec_imx: use of_get_mac_address() to get mac address out of DT
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH v1] gpiolib: add gpio_array_to_id helper to get ID out of GPIO array
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 02/14] usb: dwc2: Add host controller driver
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• Re: [PATCH v3 02/14] usb: dwc2: Add host controller driver
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v3 02/14] usb: dwc2: Add host controller driver
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [PATCH master] i2c: stm32: support new st,stm32mp15-i2c compatible
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 1/2] phy: stm32-usphyc: release resources to properly support EPROBE_DEFER
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH 2/2] regulator: stm32-pwr: release resources to properly support EPROBE_DEFER
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• Re: [PATCH v3 02/14] usb: dwc2: Add host controller driver
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH v3 12/14] usb: dwc2: Add gadget driver
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [PATCH v3 02/14] usb: dwc2: Add host controller driver
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [PATCH v3 01/14] Revert "usb: Add dwc2 host driver"
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [PATCH v3 13/14] usb: dwc2: Use register_otg_device
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [PATCH v3 14/14] usb: dwc2: Add ulpi phy function
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [PATCH v3 09/14] usb: dwc2: host: Rewrite dwc2_hc_init
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [PATCH v3 11/14] usb: dwc2: Add structure for gadget driver
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [PATCH v3 10/14] usb: dwc2: Add function to flush tx fifo
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [PATCH v3 07/14] usb: dwc2: host: Dynamic fifo size support from Linux
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [PATCH v3 05/14] usb: dwc2: Rework timeout
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [PATCH v3 03/14] usb: dwc2: host: Read dr_mode from device tree
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [PATCH v3 04/14] usb: dwc2: Rework roothub interface
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [PATCH v3 00/14] usb: dwc2: Add host and gadget driver
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [PATCH v3 06/14] usb: dwc2: host: Handle dma mapping errors
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>
• [PATCH v3 08/14] usb: dwc2: host: Fix toggle reset
  • From: Jules Maselbas <jmaselbas@xxxxxxxxx>