Re: [PATCH 2/2] ARM: i.MX: nxp-imx8mm-evk: adjust DDR training order

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fr, 2020-10-02 at 06:21 +0200, Sascha Hauer wrote:
> Hi Lucas,
> 
> On Wed, Sep 30, 2020 at 03:24:17PM +0200, Lucas Stach wrote:
> > This way we end up with the fastest DDR speed when training is finished
> > and don't need to rely on TF-A to switch into a higher DDR speed.
> > 
> > Signed-off-by: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
> > ---
> >  arch/arm/boards/nxp-imx8mm-evk/lpddr4-timing.c | 14 +++++++-------
> >  1 file changed, 7 insertions(+), 7 deletions(-)
> > 
> > diff --git a/arch/arm/boards/nxp-imx8mm-evk/lpddr4-timing.c b/arch/arm/boards/nxp-imx8mm-evk/lpddr4-timing.c
> > index b164bdec07f1..33ef5542a364 100644
> > --- a/arch/arm/boards/nxp-imx8mm-evk/lpddr4-timing.c
> > +++ b/arch/arm/boards/nxp-imx8mm-evk/lpddr4-timing.c
> > @@ -118,7 +118,7 @@ static struct dram_cfg_param lpddr4_ddrc_cfg[] = {
> >  	{ DDRC_FREQ2_INIT7(0), 0x0006004a },
> >  
> >  	/* boot start point */
> > -	{ DDRC_MSTR2(0), 0x2 }, //DDRC_MSTR2
> > +	{ DDRC_MSTR2(0), 0x0 }, //DDRC_MSTR2
> 
> What's this change about?

That's the initial timing set being used. Without this change we would
end up with the PLL set for 3000MT/s, but the timing set for 100MT/s
being used by the controller, which obviously will not work.

Regards,
Lucas

> Sascha
> 
> >  };
> >  
> >  /* PHY Initialize Configuration */
> > @@ -1940,12 +1940,6 @@ static struct dram_fsp_msg lpddr4_dram_fsp_msg[] = {
> >  		.fw_type = FW_1D_IMAGE,
> >  		.fsp_cfg = lpddr4_fsp0_cfg,
> >  		.fsp_cfg_num = ARRAY_SIZE(lpddr4_fsp0_cfg),
> > -	}, {
> > -		/* P0 3000mts 2D */
> > -		.drate = 3000,
> > -		.fw_type = FW_2D_IMAGE,
> > -		.fsp_cfg = lpddr4_fsp0_2d_cfg,
> > -		.fsp_cfg_num = ARRAY_SIZE(lpddr4_fsp0_2d_cfg),
> >  	}, {
> >  		/* P1 400mts 1D */
> >  		.drate = 400,
> > @@ -1958,6 +1952,12 @@ static struct dram_fsp_msg lpddr4_dram_fsp_msg[] = {
> >  		.fw_type = FW_1D_IMAGE,
> >  		.fsp_cfg = lpddr4_fsp2_cfg,
> >  		.fsp_cfg_num = ARRAY_SIZE(lpddr4_fsp2_cfg),
> > +	}, {
> > +		/* P0 3000mts 2D */
> > +		.drate = 3000,
> > +		.fw_type = FW_2D_IMAGE,
> > +		.fsp_cfg = lpddr4_fsp0_2d_cfg,
> > +		.fsp_cfg_num = ARRAY_SIZE(lpddr4_fsp0_2d_cfg),
> >  	},
> >  };
> >  
> > -- 
> > 2.20.1
> > 
> > 
> > _______________________________________________
> > barebox mailing list
> > barebox@xxxxxxxxxxxxxxxxxxx
> > http://lists.infradead.org/mailman/listinfo/barebox
> > 


_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox



[Index of Archives]     [Linux Embedded]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux