Hi Sascha,
Am 02.10.20 um 09:18 schrieb Sascha Hauer:
On Thu, Oct 01, 2020 at 11:49:15AM +0200, Yunus Bas wrote:
Add a phyCORE-i.MX 6UL with eMMC. It has following features:
- i.MX 6UL
- 512 MB RAM
- eMMC
- 10/100 MBits Ethernet
- USB OTG
- USB Host
Signed-off-by: Yunus Bas <y.bas@xxxxxxxxx>
---
Changes in v2:
- Added missing include for the FIT-Image verification
---
arch/arm/boards/phytec-som-imx6/lowlevel.c | 1 +
arch/arm/dts/Makefile | 1 +
.../dts/imx6ul-phytec-phycore-som-emmc.dts | 45 +++++++++++++++++++
images/Makefile.imx | 2 +
4 files changed, 49 insertions(+)
create mode 100644 arch/arm/dts/imx6ul-phytec-phycore-som-emmc.dts
diff --git a/arch/arm/boards/phytec-som-imx6/lowlevel.c b/arch/arm/boards/phytec-som-imx6/lowlevel.c
index 407115c2a..62a1c8de7 100644
--- a/arch/arm/boards/phytec-som-imx6/lowlevel.c
+++ b/arch/arm/boards/phytec-som-imx6/lowlevel.c
@@ -110,6 +110,7 @@ PHYTEC_ENTRY(start_phytec_phycore_imx6qp_som_nand_1gib, imx6qp_phytec_phycore_so
PHYTEC_ENTRY(start_phytec_phycore_imx6q_som_emmc_1gib, imx6q_phytec_phycore_som_emmc, SZ_1G, true);
PHYTEC_ENTRY(start_phytec_phycore_imx6q_som_emmc_2gib, imx6q_phytec_phycore_som_emmc, SZ_2G, true);
+PHYTEC_ENTRY(start_phytec_phycore_imx6ul_som_emmc_512mb, imx6ul_phytec_phycore_som_emmc, SZ_512M, false);
PHYTEC_ENTRY(start_phytec_phycore_imx6ul_som_nand_512mb, imx6ul_phytec_phycore_som_nand, SZ_512M, false);
PHYTEC_ENTRY(start_phytec_phycore_imx6ull_som_lc_nand_256mb, imx6ull_phytec_phycore_som_lc_nand, SZ_256M, false);
PHYTEC_ENTRY(start_phytec_phycore_imx6ull_som_nand_512mb, imx6ull_phytec_phycore_som_nand, SZ_512M, false);
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index af061bd29..37e0f07b9 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -67,6 +67,7 @@ lwl-$(CONFIG_MACH_PHYTEC_SOM_IMX6) += imx6q-phytec-phycard.dtb.o \
imx6dl-phytec-phycore-som-emmc.dtb.o \
imx6dl-phytec-phycore-som-lc-emmc.dtb.o \
imx6ul-phytec-phycore-som-nand.dtb.o \
+ imx6ul-phytec-phycore-som-emmc.dtb.o \
imx6ull-phytec-phycore-som-lc-nand.dtb.o \
imx6ull-phytec-phycore-som-nand.dtb.o \
imx6ull-phytec-phycore-som-emmc.dtb.o
diff --git a/arch/arm/dts/imx6ul-phytec-phycore-som-emmc.dts b/arch/arm/dts/imx6ul-phytec-phycore-som-emmc.dts
new file mode 100644
index 000000000..7d29c329a
--- /dev/null
+++ b/arch/arm/dts/imx6ul-phytec-phycore-som-emmc.dts
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (C) 2020 PHYTEC Messtechnik GmbH
+ * Author: Yunus Bas <y.bas@xxxxxxxxx>
+ */
+
+/dts-v1/;
+#ifdef CONFIG_BOOTM_FITIMAGE_PUBKEY
+#include CONFIG_BOOTM_FITIMAGE_PUBKEY
+#endif
+#include <arm/imx6ul.dtsi>
+#include "imx6ul-phytec-phycore-som.dtsi"
+
+/ {
+ model = "PHYTEC phyCORE-i.MX6 Ultra Light SOM with eMMC";
+ compatible = "phytec,imx6ul-pcl063-emmc", "fsl,imx6ul";
+};
+
+&fec1 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&usdhc1 {
+ status = "okay";
+};
+
+&usdhc2 {
+ status = "okay";
+};
+
+&usbotg1 {
+ status = "okay";
+};
+
+&usbotg2 {
+ status = "okay";
+};
diff --git a/images/Makefile.imx b/images/Makefile.imx
index 7b24e5fee..2327b8a0b 100644
--- a/images/Makefile.imx
+++ b/images/Makefile.imx
@@ -346,6 +346,8 @@ $(call build_imx_habv4img, CONFIG_MACH_GRINN_LITEBOARD, start_imx6ul_liteboard_5
$(call build_imx_habv4img, CONFIG_MACH_NXP_IMX6ULL_EVK, start_nxp_imx6ull_evk, nxp-imx6ull-evk/flash-header-nxp-imx6ull-evk, nxp-imx6ull-evk)
+$(call build_imx_habv4img, CONFIG_MACH_PHYTEC_SOM_IMX6, start_phytec_phycore_imx6ul_som_emmc_512mb, phytec-som-imx6/flash-header-phytec-pcl063-512mb, phytec-phycore-imx6ul-emmc-512mb)
+
There is a 'ul' missing for mainline, should be:
phytec-som-imx6/flash-header-phytec-pcl063ul-512mb
I fixed this up here, please check -next branch if the result matches
your expectations.
Sascha
Thank you for the fix. The split-up of
flash-header-phytec-pcl063-512mb.imxcfg was sent one day prior to my
patch. It was my fault for not noticing.
Yunus
--
Yunus Bas
- Software Entwicklung -
Tel.: +49 6131 92 21 0
y.bas@xxxxxxxxx
<http://www.phytec.de/>
PHYTEC Messtechnik GmbH | Robert-Koch-Str. 39 | 55129 Mainz, Germany
Geschäftsführer: Dipl.-Ing. Michael Mitezki, Dipl.-Ing. Bodo Huber | Handelsregister Mainz HRB 4656 | Finanzamt Mainz | St.Nr. 266500608, DE 149059855
This E-Mail may contain confidential or privileged information. If you are not the intended recipient (or have received this E-Mail in error) please notify the sender immediately and destroy this E-Mail. Any unauthorized copying, disclosure or distribution of the material in this E-Mail is strictly forbidden.
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
