Hi All,
barebox-2020.09.0 is out. This is a rather small release this time. The
most significant change is that barebox now honours the load and entry
addresses if given in a FIT image. Still the addresses are optional,
barebox will continue to pick suitable addresses if they are not given.
Another bigger change is that the dwc2 USB controller driver is
completely replaced. The new version now has USB device support, check
it out.
Have fun!
Sascha
----------------------------------------------------------------
Ahmad Fatoum (12):
ARM: socfpga: achilles: remove unused barebox,bootstate node
ARM: stm32mp: add support for Seeed Odyssey board
treewide: remove stale instances of struct device
ARM: at91: pass along bootsource to netbooted barebox
i2c: sync i2c_parse_fw_timings() with upstream
i2c: at91: extend for sama5d2 support
mfd: add Atmel Flexcom support
spi: add coredevice_spi_driver macro as well
watchdog: fix watchdog_set_timeout breakage for drivers like imxwd
clk: at91: sama5d2: fix buffer overflow of clk parent_names
ARM: at91: fix link error when CONFIG_BOOTM=n
ARM: at91: sama5d27-giantboard: fix multi-image compatibility
Anees Rehman (2):
mci: imx-esdhc-pbl: Add support for IMX7
ARM: i.MX: Add atlascopco sxb board
Antony Pavlov (2):
image: Convert the IH_... values to enums
riscv: Makefile: make it possible to use riscv64 compiler
Christian Mauderer (1):
FIT: Parse `load` and `entry` addresses.
Clement Leger (1):
kvx: exclude dtb from malloc zone
Denis Osterland-Heim (1):
dtc_cpp: allow to pass options per target
Du Huanpeng (1):
Documentation: update for loongson1 board
Hubert Feurstein (1):
imd: imd_calculate_crc32: initialize imd_crc to NULL
Ian Abbott (1):
mtd: spi-nor: cadence: fix csqpi corruption in cqspi_set_protocol
Jules Maselbas (17):
ratp: Abort console_countdown when activated
ratp: Remove duplicated includes
USB: gadget: Add serialnumber device parameter
console_countdown: Add CR as valid return key
Revert "usb: Add dwc2 host driver"
usb: dwc2: Add host controller driver
usb: dwc2: host: Read dr_mode from device tree
usb: dwc2: Rework roothub interface
usb: dwc2: Rework timeout
usb: dwc2: host: Handle dma mapping errors
usb: dwc2: host: Dynamic fifo size support from Linux
usb: dwc2: host: Fix toggle reset
usb: dwc2: host: Rewrite dwc2_hc_init
usb: dwc2: Add function to flush tx fifo
usb: dwc2: Add structure for gadget driver
usb: dwc2: Add gadget driver
usb: dwc2: Use register_otg_device
Lucas Stach (7):
ARM: imx8mm: select FIRMWARE_IMX_LPDDR4_PMU_TRAIN from IMX8MM_EVK
ARM: imx8m: make debug UART selection available on i.MX8MM/MP
ARM: nxp-imx8mm-evk: always set up UART
nvmem: ocotp: add support for i.MX8MM
ARM: vexpress: set stdout path
ARM: vexpress: enable KALLSYMS in defconfig
clk: imx8mm: fix CPU clock
Oleksij Rempel (3):
ARM: dts: imx6q-prti6q: fix PHY register
ARM: dts: imx6: vicut1: fix network support
string: add sanity check to the strcmp() and strncmp()
Rouven Czerwinski (6):
clk: imx7: add IMX7D_OCOTP_CLK
nvmem: ocotp: retrieve set_timing from structure
nvmem: ocotp: add new timing function for i.MX7
nvmem: ocotp: read/write i.MX7 support
nvmem: enable OCOTP for i.MX7
ARM: Layerscape: TQMLS1046a: remove ddr calc code
Sascha Hauer (22):
dts: update to v5.8-rc4
dts: update to v5.8-rc6
dts: update to v5.8-rc7
dts: update to v5.8
dts: update to v5.9-rc1
video: ssd1307fb: Honour reset GPIO polarity
libfile: copy_file: Fix ftruncate called on device files
Merge branch 'for-next/at91' into master
Merge branch 'for-next/dts' into master
Merge branch 'for-next/imx' into master
Merge branch 'for-next/kvx' into master
Merge branch 'for-next/misc' into master
Merge branch 'for-next/stm32' into master
Merge branch 'for-next/usb-dwc2' into master
clk: imx-imx8mp: Mark arm_a53_core clk as critical
fs: squashfs: set s_op in time
fs: squashfs: Do not free root inode
fs: Use iget_locked() rather than squashfs specific function
ARM: imx8m: Make uart setup function name more generic
ARM: i.MX8M boards: always set up UART
clk: imx: clk-frac-pll: Use do_div for 64bit division
Release v2020.09.0
Stefan Riedmueller (1):
ARM: boards: phytec-som-imx6: Add mmc and emmc-boot bbu update handler
Trent Piepho (1):
pinctrl-single: Support 2 pinctrl-cells in ,pins mode
Yegor Yefremov (2):
arm: baltos: add environment node
arm: baltos: export DIP switch value
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
