[PATCH 06/10] ARM: dts: stm32mp: setup syscon-reboot-mode on TAMP general purpose register

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



With the reboot mode infrastructure in place, lets add the first in-tree
user. The STM32MP1 SoCs have general purpose registers in the TAMP
peripheral. Register 20 there is used by the vendor's U-Boot for storing
a forced boot mode. We will use the same location for our reboot mode.
Consistency between barebox and OS is maintained by having barebox fixup
the device tree with the same reboot mode information it used itself, so
we are free to choose our own mode identifiers.

Signed-off-by: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
---
 arch/arm/dts/stm32mp151.dtsi | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm/dts/stm32mp151.dtsi b/arch/arm/dts/stm32mp151.dtsi
index 5ff3b96fae4a..9638e972264a 100644
--- a/arch/arm/dts/stm32mp151.dtsi
+++ b/arch/arm/dts/stm32mp151.dtsi
@@ -28,6 +28,7 @@
 		pwm15 = &{/soc/timer@44006000/pwm};
 		pwm16 = &{/soc/timer@44007000/pwm};
 		pwm17 = &{/soc/timer@44008000/pwm};
+		tamp.reboot_mode = &reboot_mode_tamp;
 	};
 
 };
@@ -46,6 +47,20 @@
 		compatible = "st,stm32mp1-ddr";
 		reg = <0x5a003000 0x1000>;
 	};
+
+	tamp@5c00a000 {
+		compatible = "simple-bus", "syscon", "simple-mfd";
+		reg = <0x5c00a000 0x400>;
+
+		reboot_mode_tamp: reboot-mode {
+			compatible = "syscon-reboot-mode";
+			offset = <0x150>; /* reg20 */
+			mask = <0xff>;
+			mode-normal = <0>;
+			mode-loader = <0xBB>;
+			mode-recovery = <0xBC>;
+		};
+	};
 };
 
 &bsec {
-- 
2.28.0


_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox



[Index of Archives]     [Linux Embedded]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux