In some cases we have no UART access, but we still need to get barebox messages. With ramoops enabled, we still can get barebox message from running Linux by reading: cat /sys/fs/pstore/console-ramoops-0 Signed-off-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx> --- arch/arm/dts/imx6qdl-prti6q.dtsi | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/arch/arm/dts/imx6qdl-prti6q.dtsi b/arch/arm/dts/imx6qdl-prti6q.dtsi index f2b36553d4..bfc059e34f 100644 --- a/arch/arm/dts/imx6qdl-prti6q.dtsi +++ b/arch/arm/dts/imx6qdl-prti6q.dtsi @@ -27,6 +27,17 @@ }; }; + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* Address will be determined by the bootloader */ + ramoops { + compatible = "ramoops"; + }; + }; + reg_1v8: regulator-1v8 { compatible = "regulator-fixed"; regulator-name = "1v8"; -- 2.28.0 _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox