On 9/28/20 5:50 PM, Marco Felsch wrote:
> The memory init is done by of_probe_memory() first which is part of the
> core_initcall's because the device tree has an valid memory node.
> Otherwise the memory-controller driver (esdctl) would add it by reading
> the information from the controller which are set by the DCD data.
> Therefore we can drop it from the local board file.
Reviewed-by: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
>
> Signed-off-by: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
> ---
> arch/arm/boards/freescale-mx6-sabrelite/board.c | 12 ------------
> 1 file changed, 12 deletions(-)
>
> diff --git a/arch/arm/boards/freescale-mx6-sabrelite/board.c b/arch/arm/boards/freescale-mx6-sabrelite/board.c
> index 020a44297a..1b39ef82c6 100644
> --- a/arch/arm/boards/freescale-mx6-sabrelite/board.c
> +++ b/arch/arm/boards/freescale-mx6-sabrelite/board.c
> @@ -39,18 +39,6 @@ static iomux_v3_cfg_t sabrelite_enet_gpio_pads[] = {
> MX6Q_PAD_RGMII_RX_CTL__GPIO_6_24,
> };
>
> -static int sabrelite_mem_init(void)
> -{
> - if (!of_machine_is_compatible("fsl,imx6q-sabrelite") &&
> - !of_machine_is_compatible("fsl,imx6dl-sabrelite"))
> - return 0;
> -
> - arm_add_mem_device("ram0", 0x10000000, SZ_1G);
> -
> - return 0;
> -}
> -mem_initcall(sabrelite_mem_init);
> -
> static int ksz9021rn_phy_fixup(struct phy_device *dev)
> {
> phy_write(dev, 0x09, 0x0f00);
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
