Re: [PATCH v2 2/2] ARM: imx: Add Support for Webasto ccbv2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Oct 07, 2020 at 03:07:58PM +0200, Rouven Czerwinski wrote:
> +device_initcall(ccbv2_device_init);
> +
> +static int ccbv2_apply_overlay(void)
> +{
> +	struct device_node *overlay;
> +	struct fdt_header *fdt;
> +	int ret;
> +
> +	if(!IS_ENABLED(CONFIG_FIRMWARE_CCBV2_OPTEE)
> +	   || !of_machine_is_compatible("webasto,imx6ul-ccbv2"))
> +		return 0;
> +
> +	fdt = (void*)OPTEE_OVERLAY_LOCATION;
> +	overlay = of_unflatten_dtb(fdt);
> +
> +	if (IS_ERR(overlay))
> +		return PTR_ERR(overlay);
> +
> +	ret = of_register_overlay(overlay);
> +	if (ret) {
> +		printf("cannot apply oftree overlay: %s\n", strerror(-ret));
> +		goto err;
> +	}
> +
> +	return 0;
> +err:
> +	of_delete_node(overlay);
> +	return ret;
> +}
> +device_initcall(ccbv2_apply_overlay);

No need for two initcalls, please combine into one. Also, you could try
Oleksijs new way of registering board code as a driver, see 5e1fc532538.

> +static void configure_uart(void)
> +{
> +	void __iomem *iomuxbase = (void *)MX6_IOMUXC_BASE_ADDR;
> +
> +	imx6_ungate_all_peripherals();
> +
> +	imx_setup_pad(iomuxbase, MX6_PAD_LCD_DATA16__UART7_DCE_TX);
> +	imx_setup_pad(iomuxbase, MX6_PAD_LCD_DATA17__UART7_DCE_RX);
> +
> +	imx6_uart_setup((void *)MX6_UART7_BASE_ADDR);
> +
> +	if (IS_ENABLED(CONFIG_DEBUG_LL))
> +		putc_ll('>');

No need to put that in a IS_ENABLED(CONFIG_DEBUG_LL), without it
putc_ll() is a no-op anyway.

> diff --git a/firmware/Kconfig b/firmware/Kconfig
> index 97b7b3c2ee..c2ff51b911 100644
> --- a/firmware/Kconfig
> +++ b/firmware/Kconfig
> @@ -16,4 +16,9 @@ config FIRMWARE_IMX8MP_ATF
>  config FIRMWARE_IMX8MQ_ATF
>          bool
>  
> +config FIRMWARE_CCBV2_OPTEE
> +	bool
> +	depends on MACH_WEBASTO_CCBV2 && PBL_OPTEE
> +	default y

This makes the firmware mandatory for compiling this board, right? Can
we make this optional so that we can enable the board in
imx_v7_defconfig?

Sascha

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox



[Index of Archives]     [Linux Embedded]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux