U-Boot V2 Development (Barebox)
[Prev Page][Next Page]
- [PATCH 20/42] serial: imx: Add imx8mm compatible
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 29/42] ARM: i.MX8M: Add some lowlevel clock functions
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 36/42] ARM: i.MX8MQ boards: Add missing includes
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 31/42] ARM: i.MX8M: Add and use function for early UART clock setup
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 27/42] Add some CCM defines for i.MX8M
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 28/42] ARM: i.MX8M: rename imx8-ccm-regs.h to imx8m-ccm-regs.h
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 23/42] clk: imx: Add pll14xx support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 34/42] scripts: imx-usb-loader: Add 2nd stage loading support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 22/42] I2C: i.MX: Add early i2c support for i.MX8M
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 38/42] ARM: i.MX8M: Add TF-A loading support for i.MX8MM
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 12/42] HAB: i.MX8M: rename imx8_* functions to imx8m_*
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 19/42] usb: imx: Add i.MX8mm support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 10/42] ARM: i.MX8M: rename imx8_* bootsource functions to imx8mq_*
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 08/42] ARM: i.MX: esdctl: rename functions to imx8m_*
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 13/42] ARM: i.MX8M: rename i.MX8M specific function
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 25/42] clk: imx: Add imx8mm clk driver
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 24/42] clk: imx: Add imx8m_clk_composite_critical
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 09/42] ARM: i.MX8M: Use imx8mq.c for other i.MX8M as well
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 17/42] usb: gadget: fsl_udc: Add PBL image loading support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 18/42] usb: gadget: fsl_udc: Fix warnings on 64bit compilation
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 00/42] Add i.MX8M support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 15/42] mci: imx-esdhc-pbl: Add instance 2 for i.MX8MM
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 06/42] ARM: i.MX8M: Add imx8mm-regs.h
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 03/42] ARM: i.MX8M: add and use imx8mq_setup_pad()
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 04/42] ARM: i.MX: Drop iomux argument from mx7_setup_pad()
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 01/42] ARM: i.MX8: Move iomux header to make space for i.MX8MM
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 02/42] ARM: i.MX8M: Add base addresses common to i.MX8M
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- v2020.02.0
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH v3 0/7] SPDX license tags and (L)GPL boilerplate cleanup
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 1/4] fs: Introduce discard_range()
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 2/4] cdev: Add discard_range hook
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 4/4] copy_file: call discard_range on destination file
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 3/4] block: Implement discard_range
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] i2c_probe command: Use kstrtoint
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 1/2] commands: boot: refactor boot entry creation to use iterators
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- [PATCH] fixup! commands: boot: create boot entries on demand
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- Re: [PATCH 1/2] commands: boot: refactor boot entry creation to use iterators
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 1/2] mci: stm32_sdmmc2: add High-Speed (26 & 52 MHz) support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] serial: ns16550_pci: fix possible read of uninitialized variable
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH v3 2/7] include: add SPDX GPL-2.0-or-later license tags where applicable
- From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
- [PATCH v3 5/7] include: add SPDX LGPL-2.1-or-later license tags where applicable
- From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
- [PATCH v3 1/7] include: add SPDX GPL-2.0-only license tags where applicable
- From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
- [PATCH v3 6/7] include: spi: add SPDX GPL-2.0-or-later license tags where applicable
- From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
- [PATCH v3 7/7] include: spi: add SPDX GPL-2.0-only license tags for files without licensing information
- From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
- [PATCH v3 3/7] include: add SPDX GPL-2.0-only license tags for files without licensing information
- From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
- [PATCH v3 0/7] SPDX license tags and (L)GPL boilerplate cleanup
- From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
- [PATCH v3 4/7] LICENSES: add LGPL-2.1-or-later
- From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
- [PATCH 2/3] clk-conf.h: Add static inline wrapper for of_clk_set_defaults()
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 3/3] driver: Call of_clk_set_defaults for each probed device
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 1/3] clk-conf.h: Add missing re-inclusion protection
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] usb: gadget: fsl_udc: remove unnessary argument
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 2/3] scripts: imx-usb-loader: download address is always the header address
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 3/3] scripts: imx-usb-loader: dladdr is unused, remove it
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 1/3] scripts: imx-usb-loader: remove unnecessary check
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 2/2] commands: boot: create boot entries on demand
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- [PATCH 1/2] commands: boot: refactor boot entry creation to use iterators
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- [PATCH 2/2] mci: core: populate mci_ios.timing member
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- [PATCH 1/2] mci: stm32_sdmmc2: add High-Speed (26 & 52 MHz) support
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- [PATCH] serial: ns16550_pci: fix possible read of uninitialized variable
- From: Ahmad Fatoum <ahmad@xxxxxx>
- RE:RE: imx27 phycard update problems from barebox 2019.01.0 to 2020.01.0
- From: "Koelle, Holger" <Holger.Koelle@xxxxxxxxxxxx>
- Re: imx27 phycard update problems from barebox 2019.01.0 to 2020.01.0
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] mci: imx-esdhc: lower timeout message priority to dev_dbg
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] scripts: imx-usb-loader: Accept new header version
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 1/5] mci: stm32_sdmmc2: don't ignore reset_control_get errors
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 1/2] driver: bail out, don't crash, if drv->name is not set
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] clocksource: rename driver for ARMv8 Timer to ARM architected timer
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] ARM: stm32mp: dk2: barebox_set_model to shorter name
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- AW: imx27 phycard update problems from barebox 2019.01.0 to 2020.01.0
- From: "Koelle, Holger" <Holger.Koelle@xxxxxxxxxxxx>
- [PATCH 5/5] i2c: tegra: correct error message
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- [PATCH 4/5] watchdog: dw_wdt: remove duplicated error message
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- [PATCH 3/5] watchdog: dw_wdt: inform user on missing reset control line
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- [PATCH 2/5] net: designware: socfpga: fix possible invalid pointer deref
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- [PATCH 1/5] mci: stm32_sdmmc2: don't ignore reset_control_get errors
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- [PATCH 2/2] watchdog: dw_wdt: populate driver_d.name
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- [PATCH 1/2] driver: bail out, don't crash, if drv->name is not set
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- [PATCH] clocksource: rename driver for ARMv8 Timer to ARM architected timer
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- [PATCH 2/4] watchdog: f71808e: only print reset reason if one's indicated
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- [PATCH 4/4] reset: stm32: migrate restart reason and handler from stm32_iwdg
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- [PATCH 3/4] reset_source: migrate from reset_source_name to reset_source_xlate
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- [PATCH 1/4] reset_source: introduce reset_source_xlate to translate specific type
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- [PATCH] ARM: stm32mp: dk2: barebox_set_model to shorter name
- From: Ahmad Fatoum <ahmad@xxxxxx>
- Re: [PATCH v2] fs: jffs2: add initial support for reading jffs2
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] fixup! imd: add support for checksum generation/verification
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 0/8] PWM: misc fixes
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] hw_random: add support for STM32 RNG
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] doc: bootchooser: Fix barebox-state example
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 1/2] sandbox: fix signed integer overflow
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] acpi: include missing header in <acpi.h>
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [RFC 4/5] net: rtl8169: make it work on big-endian system
- From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
- Re: [RFC 4/5] net: rtl8169: make it work on big-endian system
- From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
- [PATCH] fixup! imd: add support for checksum generation/verification
- From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
- Re: imx27 phycard update problems from barebox 2019.01.0 to 2020.01.0
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- imx27 phycard update problems from barebox 2019.01.0 to 2020.01.0
- From: "Koelle, Holger" <Holger.Koelle@xxxxxxxxxxxx>
- [PATCH 4/8] video: backlight-pwm: remove duplicate assignment to object
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- [PATCH 5/8] led: pwm: don't test if pointer is smaller than zero
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- [PATCH 2/8] PWM: pxa: make MMIO writes always little endian
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- [PATCH 1/8] PWM: pxa: remove unused struct members
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- [PATCH 3/8] regmap: forward declare structs used in header
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- [PATCH 6/8] led: pwm: fail if required max-brightness option is missing
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- [PATCH 0/8] PWM: misc fixes
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- [PATCH 7/8] led: pwm: support active-low property
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- [PATCH 8/8] PWM: core: constify chip->ops pointer
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- [PATCH] fixup! hw_random: add support for STM32 RNG
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- [PATCH] hw_random: add support for STM32 RNG
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- [PATCH 3/3] mtd: nand-imx: make sure the just created BBT is used
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 2/3] mtd: nand-imx: Create BBT automatically when necessary
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 1/3] mtd: nand-imx: do not use blocks reserved for BBT
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH v2] fs: jffs2: add initial support for reading jffs2
- From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
- Re: Uefi version with 'bare metal' drivers?
- From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
- Re: Updating barebox from Linux
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Updating barebox from Linux
- From: Christian Eggers <ceggers@xxxxxxx>
- Re: [RFC 4/5] net: rtl8169: make it work on big-endian system
- From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
- [PATCH] doc: bootchooser: Fix barebox-state example
- From: Christian Eggers <ceggers@xxxxxxx>
- Re: state framework, fixed-partitions, eeprom and linux
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- Re: state framework, fixed-partitions, eeprom and linux
- From: Christian Eggers <ceggers@xxxxxxx>
- Re: [PATCH 0/3] commands/test: some improvements
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH v2 4/6] include: add SPDX LGPL-2.1-or-later license tags where applicable
- From: Roland Hieber <rohieb@xxxxxxxxxxx>
- Re: [PATCH v2 2/6] include: add SPDX GPL-2.0-or-later license tags where applicable
- From: Roland Hieber <rohieb@xxxxxxxxxxx>
- Re: state framework, fixed-partitions, eeprom and linux
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- Re: state framework, fixed-partitions, eeprom and linux
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- state framework, fixed-partitions, eeprom and linux
- From: Christian Eggers <ceggers@xxxxxxx>
- Re: [PATCH 1/3] commands/test: Bail out on incomplete command line options
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- [PATCH 2/2] sandbox: hostfile: fix UB-inducing shift
- From: Ahmad Fatoum <ahmad@xxxxxx>
- [PATCH 1/2] sandbox: fix signed integer overflow
- From: Ahmad Fatoum <ahmad@xxxxxx>
- Re: [PATCH v2 2/3] regulator: pfuze: add support to other architectures
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] acpi: include missing header in <acpi.h>
- From: Ahmad Fatoum <ahmad@xxxxxx>
- Re: [PATCH] RISC-V: unbreak built-in dtb
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH v4] MIPS: don't overlay relocation data with BSS
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 0/4] mci: stm32_sdmmc2: timeout and bus-width bug fixes
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] regulator: fixed: take regulator-boot-on into account
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] ubsan: use a big if block in Kconfig
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 1/3] commands/test: Bail out on incomplete command line options
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH v2 6/6] include: spi: add SPDX GPL-2.0-only license tags for files without licensing information
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- Re: [PATCH] images: Use separate LDFLAGS for PBL
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH v2 5/6] include: spi: add SPDX GPL-2.0-or-later license tags where applicable
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- Re: [PATCH v2 4/6] include: add SPDX LGPL-2.1-or-later license tags where applicable
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- Re: [PATCH v2 3/6] include: add SPDX GPL-2.0-only license tags for files without licensing information
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- Re: [PATCH v2 2/6] include: add SPDX GPL-2.0-or-later license tags where applicable
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- Re: [PATCH v2 1/6] include: add SPDX GPL-2.0-only license tags where applicable
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- [PATCH] RISC-V: unbreak built-in dtb
- From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
- [PATCH v2 5/6] include: spi: add SPDX GPL-2.0-or-later license tags where applicable
- From: Roland Hieber <rohieb@xxxxxxxxxxx>
- [PATCH v2 6/6] include: spi: add SPDX GPL-2.0-only license tags for files without licensing information
- From: Roland Hieber <rohieb@xxxxxxxxxxx>
- [PATCH v2 2/6] include: add SPDX GPL-2.0-or-later license tags where applicable
- From: Roland Hieber <rohieb@xxxxxxxxxxx>
- [PATCH v2 0/6] SPDX license tags and (L)GPL boilerplate cleanup
- From: Roland Hieber <rohieb@xxxxxxxxxxx>
- [PATCH v2 3/6] include: add SPDX GPL-2.0-only license tags for files without licensing information
- From: Roland Hieber <rohieb@xxxxxxxxxxx>
- [PATCH v2 1/6] include: add SPDX GPL-2.0-only license tags where applicable
- From: Roland Hieber <rohieb@xxxxxxxxxxx>
- [PATCH v2 4/6] include: add SPDX LGPL-2.1-or-later license tags where applicable
- From: Roland Hieber <rohieb@xxxxxxxxxxx>
- [PATCH v2 1/3] regulator: pfuze: remove unsued define
- From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
- [PATCH v2 2/3] regulator: pfuze: add support to other architectures
- From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
- [PATCH v2 3/3] ARM: phyCORE-i.MX8M SOM: add pmic initialisation for power good
- From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
- [PATCH 2/5] mci: stm32_sdmmc2: don't reset before retrying failed operations
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- [PATCH 0/4] mci: stm32_sdmmc2: timeout and bus-width bug fixes
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- [PATCH 4/5] mci: stm32_sdmmc2: compare ios ->bus_width with correct constants
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- [PATCH 3/5] mci: core: don't test 4-bit-buswidth support if MMC host lacks capability
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- [PATCH 1/5] mci: stm32_sdmmc2: use correct card power cycle sequence
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- [PATCH 5/5] mci: stm32_sdmmc2: fix typo in debug string
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- Re: maeling list issue
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- maeling list issue
- From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
- Re: [PATCH 2/4] regulator: pfuze: add support to other architectures
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH v4] MIPS: don't overlay relocation data with BSS
- From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
- Re: [PATCH 2/4] regulator: pfuze: add support to other architectures
- From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
- Re: Small tweak to get ACPI watchdog working (iTCO)
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- Re: Small tweak to get ACPI watchdog working (iTCO)
- From: Cameron Ferguson <cameron.bare86@xxxxxxxxx>
- Re: Small tweak to get ACPI watchdog working (iTCO)
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- Re: Small tweak to get ACPI watchdog working (iTCO)
- From: Cameron Ferguson <cameron.bare86@xxxxxxxxx>
- Re: Small tweak to get ACPI watchdog working (iTCO)
- From: Cameron Ferguson <cameron.bare86@xxxxxxxxx>
- [PATCH] regulator: fixed: take regulator-boot-on into account
- From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
- [PATCH] ubsan: use a big if block in Kconfig
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: Small tweak to get ACPI watchdog working (iTCO)
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- Re: [PATCH v3] MIPS: remove .bss to __rel_start overlay
- From: Peter Mamonov <pmamonov@xxxxxxxxx>
- Re: Small tweak to get ACPI watchdog working (iTCO)
- From: Cameron Ferguson <cameron.bare86@xxxxxxxxx>
- Re: [PATCH v2] Documentation/sandbox: Add hint how to end a sandboxed barebox
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH v3] MIPS: remove .bss to __rel_start overlay
- From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
- Re: [PATCH] MIPS: relocate_code: fix relocation area size
- From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
- Re: [PATCH] MIPS: relocate_code: fix relocation area size
- From: Peter Mamonov <pmamonov@xxxxxxxxx>
- Re: [PATCH] MIPS: relocate_code: fix relocation area size
- From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
- [PATCH v2] MIPS: remove .bss to __rel_start overlay
- From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
- [PATCH] MIPS: relocate_code: fix relocation area size
- From: Peter Mamonov <pmamonov@xxxxxxxxx>
- Re: Small tweak to get ACPI watchdog working (iTCO)
- From: Cameron Ferguson <cameron.bare86@xxxxxxxxx>
- [PATCH v2] Documentation/sandbox: Add hint how to end a sandboxed barebox
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH] Documentation/sandbox: Add hint how to end a sandboxed barebox
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH] Documentation/sandbox: Add hint how to end a sandboxed barebox
- From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
- Re: [PATCH v1] MIPS: remove .bss to __rel_start overlay
- From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
- [PATCH] Documentation/sandbox: Add hint how to end a sandboxed barebox
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH v1] MIPS: remove .bss to __rel_start overlay
- From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
- Re: [PATCH v1] MIPS: remove .bss to __rel_start overlay
- From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
- Re: [PATCH v1] MIPS: remove .bss to __rel_start overlay
- From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
- [PATCH 3/3] commands/test: Implement -b and -c to test for character and block devices
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- [PATCH 2/3] commands/test: Improve option parsing to handle "]" less special
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- [PATCH 1/3] commands/test: Bail out on incomplete command line options
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- [PATCH 0/3] commands/test: some improvements
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH v1] MIPS: remove .bss to __rel_start overlay
- From: Peter Mamonov <pmamonov@xxxxxxxxx>
- Re: [PATCH v1] MIPS: remove .bss to __rel_start overlay
- From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
- Re: Barebox 2020.01.0 and Device Tree from Linux Kernel 5.4
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- Re: [PATCH v1] MIPS: remove .bss to __rel_start overlay
- From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
- Small tweak to get ACPI watchdog working (iTCO)
- From: Cameron Ferguson <cameron.bare86@xxxxxxxxx>
- Re: [PATCH v1] MIPS: remove .bss to __rel_start overlay
- From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
- Re: MIPS: relocation issue
- From: Peter Mamonov <pmamonov@xxxxxxxxx>
- Re: MIPS: relocation issue
- From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
- RE: MIPS: relocation issue
- From: Peter Mamonov <pmamonov@xxxxxxxxx>
- Re: [PATCH] fixup! ARM: add optee early loading function
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [SPAM:54%] Re: [PATCH] barebox_banner: switch to pr_notice
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] fixup! ARM: add optee early loading function
- From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
- Re: [SPAM:54%] Re: [PATCH] barebox_banner: switch to pr_notice
- From: Christian Eggers <ceggers@xxxxxxx>
- Re: MIPS: relocation issue
- From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
- Re: [PATCH] barebox_banner: switch to pr_notice
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH v1] MIPS: remove .bss to __rel_start overlay
- From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
- Re: [PATCH v3 0/5] OP-TEE early loading
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH v3 1/5] optee: move optee_verify_header() to common
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH v4 1/3] imd: replace magicvalue with sizeof(struct)
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 4/4] ARM: phyCORE-i.MX8M SOM: add pmic initialisation for power good
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 2/4] regulator: pfuze: add support to other architectures
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [RFC PATCH 9/9] usb: dwc2: Add gadget driver
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH v2 1/7] usb: dwc2: Add host controller driver
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- MIPS: relocation issue
- From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
- Re: [PATCH v3 1/5] optee: move optee_verify_header() to common
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- [PATCH v3 5/5] user: add documentation for OP-TEE loading
- From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
- [PATCH v3 3/5] ARM: add optee early loading function
- From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
- [PATCH v3 0/5] OP-TEE early loading
- From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
- [PATCH v3 2/5] ARM: import setjmp implementation from U-Boot
- From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
- [PATCH v3 4/5] ARM: mach-imx: test PL310 write access
- From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
- [PATCH v3 1/5] optee: move optee_verify_header() to common
- From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
- Re: [RFC PATCH] bootm: Register as bootentry provider
- From: Christian Eggers <ceggers@xxxxxx>
- Re: [PATCH v2 1/7] usb: dwc2: Add host controller driver
- From: Jules Maselbas <jmaselbas@xxxxxxxxx>
- Re: [RFC PATCH 9/9] usb: dwc2: Add gadget driver
- From: Jules Maselbas <jmaselbas@xxxxxxxxx>
- [PATCH 1/4] regulator: pfuze: remove unsued define
- From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
- [PATCH 2/4] regulator: pfuze: add support to other architectures
- From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
- [PATCH 3/4] regulator: pfuze: add include regmap.h so struct regmap is known
- From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
- [PATCH 4/4] ARM: phyCORE-i.MX8M SOM: add pmic initialisation for power good
- From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
- [PATCH v4 2/3] imd: add support for checksum generation/verification
- From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
- [PATCH v4 3/3] commands: bbu: add support for imd checksum
- From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
- [PATCH v4 1/3] imd: replace magicvalue with sizeof(struct)
- From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
- Re: [RFC PATCH 9/9] usb: dwc2: Add gadget driver
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] images: Use separate LDFLAGS for PBL
- From: Christian Eggers <ceggers@xxxxxxx>
- Re: [PATCH 0/2] gpiolib: minor optimization
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] common: make CONFIG_BAREBOX_UPDATE visible
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] gadget: f_fastboot: Fix memory leak
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] eeprom: at25: Allow page sizes greater than 16 bit
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] ARM: imx6: properly check for IPU presence
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [RFC PATCH] bootm: Register as bootentry provider
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 2/2] gpiolib: introduce helper functions working on gpio_info structs
- From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
- [PATCH 0/2] gpiolib: minor optimization
- From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
- [PATCH 1/2] gpiolib: reorder functions
- From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
- [RFC PATCH] bootm: Register as bootentry provider
- From: Christian Eggers <ceggers@xxxxxxx>
- Re: Configuring for secure boot / Using bootchooser
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 1/5] state: remove param member from struct state_string
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] bootchooser: Change name of kernel parameter
- From: Christian Eggers <ceggers@xxxxxxx>
- Re: [PATCH] bootchooser: Change name of kernel parameter
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- [PATCH] bootchooser: Change name of kernel parameter
- From: Christian Eggers <ceggers@xxxxxxx>
- [PATCH] barebox_banner: switch to pr_notice
- From: Christian Eggers <ceggers@xxxxxxx>
- [PATCH] common: make CONFIG_BAREBOX_UPDATE visible
- From: Christian Eggers <ceggers@xxxxxxx>
- [PATCH] gadget: f_fastboot: Fix memory leak
- From: Christian Eggers <ceggers@xxxxxxx>
- [PATCH] eeprom: at25: Allow page sizes greater than 16 bit
- From: Christian Eggers <ceggers@xxxxxxx>
- [PATCH] ARM: imx6: properly check for IPU presence
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- Re: Barebox 2020.01.0 and Device Tree from Linux Kernel 5.4
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- Barebox 2020.01.0 and Device Tree from Linux Kernel 5.4
- From: gianluca <gianlucarenzi@xxxxxxxx>
- Re: [PATCH v2 1/7] usb: dwc2: Add host controller driver
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] usb: udc: don't warn on unused gadget
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH] usb: udc: don't warn on unused gadget
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] usb: udc: don't warn on unused gadget
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- RE: [yocto] #yocto bootchooser: Cannot get state 'state'
- From: Hans-Ulrich Schlieben <hu.schlieben@xxxxxxxxxxxxxx>
- Re: [yocto] #yocto bootchooser: Cannot get state 'state'
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- RE: [yocto] #yocto bootchooser: Cannot get state 'state'
- From: Hans-Ulrich Schlieben <hu.schlieben@xxxxxxxxxxxxxx>
- RE: [yocto] #yocto bootchooser: Cannot get state 'state'
- From: Hans-Ulrich Schlieben <hu.schlieben@xxxxxxxxxxxxxx>
- Re: [yocto] #yocto bootchooser: Cannot get state 'state'
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- RE: [yocto] #yocto bootchooser: Cannot get state 'state'
- From: Hans-Ulrich Schlieben <hu.schlieben@xxxxxxxxxxxxxx>
- [PATCH 5/5] parameter: Return NULL instead of ENOSYS if CONFIG_PARAMETER is disabled
- From: Christian Eggers <ceggers@xxxxxxx>
- [PATCH 4/5] globalvar: Allow NULL pointers to be returned by dev_add_param()
- From: Christian Eggers <ceggers@xxxxxxx>
- [PATCH 3/5] state: remove param member from state_uint32, state_enum32, state_mac
- From: Christian Eggers <ceggers@xxxxxxx>
- [PATCH 2/5] mci: remove param_probe member from struct mci
- From: Christian Eggers <ceggers@xxxxxxx>
- [PATCH 1/5] state: remove param member from struct state_string
- From: Christian Eggers <ceggers@xxxxxxx>
- Re: [PATCH 1/3] watchdog: Select CONFIG_PARAMETER
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
- Re: Configuring for secure boot / Using bootchooser
- From: Christian Eggers <ceggers@xxxxxxx>
- Re: [PATCH 1/3] watchdog: Select CONFIG_PARAMETER
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [yocto] #yocto bootchooser: Cannot get state 'state'
- From: "Robert Berger@xxxxxxxxxx" <robert.berger.yocto.user@xxxxxxxxx>
- [RFC PATCH 7/9] usb: dwc2: Add getter for gadget fifo hwparams
- From: Jules Maselbas <jmaselbas@xxxxxxxxx>
- [RFC PATCH 9/9] usb: dwc2: Add gadget driver
- From: Jules Maselbas <jmaselbas@xxxxxxxxx>
- [RFC PATCH 8/9] usb: dwc2: gadget: Configure fifo size
- From: Jules Maselbas <jmaselbas@xxxxxxxxx>
- [RFC PATCH 6/9] usb: dwc2: Add structure for gadget driver
- From: Jules Maselbas <jmaselbas@xxxxxxxxx>
- [RFC PATCH 5/9] usb: dwc2: Add function to flush a tx fifo
- From: Jules Maselbas <jmaselbas@xxxxxxxxx>
- [RFC PATCH 4/9] usb: dwc2: Add otg state
- From: Jules Maselbas <jmaselbas@xxxxxxxxx>
- [RFC PATCH 3/9] usb: Update uses of usb_endpoint_maxp
- From: Jules Maselbas <jmaselbas@xxxxxxxxx>
- [RFC PATCH 2/9] BACKPORT: usb: ch9: make usb_endpoint_maxp() return only packet size
- From: Jules Maselbas <jmaselbas@xxxxxxxxx>
- [RFC PATCH 1/9] BACKPORT: usb: Add helper to extract bits 12:11 of wMaxPacketize
- From: Jules Maselbas <jmaselbas@xxxxxxxxx>
- [RFC PATCH 0/9] usb: Add dwc2 gadget driver
- From: Jules Maselbas <jmaselbas@xxxxxxxxx>
- [PATCH v2 1/7] usb: dwc2: Add host controller driver
- From: Jules Maselbas <jmaselbas@xxxxxxxxx>
- [PATCH v2 3/7] usb: dwc2: host: Rework roothub interface
- From: Jules Maselbas <jmaselbas@xxxxxxxxx>
- [PATCH v2 7/7] usb: dwc2: host: Rewrite dwc2_hc_init
- From: Jules Maselbas <jmaselbas@xxxxxxxxx>
- [PATCH v2 5/7] usb: dwc2: host: Dynamic fifo size support from Linux
- From: Jules Maselbas <jmaselbas@xxxxxxxxx>
- [PATCH v2 6/7] usb: dwc2: host: Fix toggle reset
- From: Jules Maselbas <jmaselbas@xxxxxxxxx>
- [PATCH v2 0/7] usb: dwc2 host driver
- From: Jules Maselbas <jmaselbas@xxxxxxxxx>
- [PATCH v2 2/7] usb: dwc2: host: Read dr_mode from device tree
- From: Jules Maselbas <jmaselbas@xxxxxxxxx>
- [PATCH v2 4/7] usb: dwc2: host: Handle dma mapping errors
- From: Jules Maselbas <jmaselbas@xxxxxxxxx>
- Re: [PATCH 1/3] watchdog: Select CONFIG_PARAMETER
- From: Christian Eggers <ceggers@xxxxxxx>
- Re: [PATCH v3 2/3] imd: add support for checksum generation/verification
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] watchdog: Fix error path
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 1/3] watchdog: Select CONFIG_PARAMETER
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] param: Make enum param_tristate always visible
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [yocto] #yocto bootchooser: Cannot get state 'state'
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- Re: [yocto] #yocto bootchooser: Cannot get state 'state'
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- RE: [yocto] #yocto bootchooser: Cannot get state 'state'
- From: Hans-Ulrich Schlieben <hu.schlieben@xxxxxxxxxxxxxx>
- RE: [yocto] #yocto bootchooser: Cannot get state 'state'
- From: Hans-Ulrich Schlieben <hu.schlieben@xxxxxxxxxxxxxx>
- [PATCH] Partly revert "globalvar: fix crash if CONFIG_NVVAR is not set"
- From: Christian Eggers <ceggers@xxxxxxx>
- Re: [RFC PATCH 0/7] usb: dwc2 host driver
- From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
- [PATCH 3/3] globalvar: Select CONFIG_PARAMETER
- From: Christian Eggers <ceggers@xxxxxxx>
- [PATCH 2/3] usb: otg: Select CONFIG_PARAMETER
- From: Christian Eggers <ceggers@xxxxxxx>
- [PATCH 1/3] watchdog: Select CONFIG_PARAMETER
- From: Christian Eggers <ceggers@xxxxxxx>
- Re: Configuring for secure boot
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] watchdog: Fix error path
- From: Christian Eggers <ceggers@xxxxxxx>
- Re: Configuring for secure boot
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- [PATCH] param: Make enum param_tristate always visible
- From: Christian Eggers <ceggers@xxxxxxx>
- Re: [PATCH v2 2/5] ARM: import setjmp implementation from U-Boot
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH v2 4/5] ARM: mach-imx: test PL310 write access
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: Configuring for secure boot
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Configuring for secure boot
- From: Christian Eggers <ceggers@xxxxxxx>
- Re: [PATCH 5/5] watchdog: k1c: Add k1c watchdog support
- From: Clément Leger <cleger@xxxxxxxxx>
- Re: [yocto] #yocto bootchooser: Cannot get state 'state'
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- Re: [yocto] #yocto bootchooser: Cannot get state 'state'
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- Re: [PATCH 5/5] watchdog: k1c: Add k1c watchdog support
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- Re: Issue CPU instructions to start watchdog?
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- [PATCH v3 2/3] imd: add support for checksum generation/verification
- From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
- [PATCH v3 3/3] commands: bbu: add support for imd checksum
- From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
- [PATCH v3 1/3] imd: replace magicvalue with sizeof(struct)
- From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
- [PATCH] PCI: layerscape: Allow to share stream_ids per host controller
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Issue CPU instructions to start watchdog?
- From: Frederick Gotham <cauldwell.thomas@xxxxxxxxx>
- [PATCH v2 5/5] user: add documentation for OP-TEE loading
- From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
- [PATCH v2 3/5] ARM: add optee early loading function
- From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
- [PATCH v2 4/5] ARM: mach-imx: test PL310 write access
- From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
- [PATCH v2 2/5] ARM: import setjmp implementation from U-Boot
- From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
- [PATCH v2 1/5] optee: move optee_verify_header() to common
- From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
- Re: [PATCH] pinctrl-single: Handle "pinctrl-single, function-mask" dt property
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 2/4] ARM: add optee early loading function
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] pinctrl: imx-v3: Support for imx6ull-iomuxc-snvs
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] nvmem: ocotp: Support for i.MX6ULL/ULZ
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] net: designware: eqos: don't funnel all MDIO writes to register 0
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 4/4] user: add documentation for OP-TEE loading
- From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
- [PATCH 1/4] optee: move optee_verify_header() to common
- From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
- [PATCH 2/4] ARM: add optee early loading function
- From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
- [PATCH 3/4] ARM: mach-imx: OPTEE PBL configures PL210
- From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
- [PATCH] net: designware: eqos: don't funnel all MDIO writes to register 0
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- [PATCH] pinctrl: imx-v3: Support for imx6ull-iomuxc-snvs
- From: Christian Eggers <ceggers@xxxxxxx>
- [PATCH] nvmem: ocotp: Support for i.MX6ULL/ULZ
- From: Christian Eggers <ceggers@xxxxxxx>
- Re: [PATCH] lds: Fix alignment of initcall table
- From: Christian Eggers <ceggers@xxxxxxx>
- Re: Cannot get 'wd' to appear
- From: Frederick Gotham <cauldwell.thomas@xxxxxxxxx>
- Re: Cannot get 'wd' to appear
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Cannot get 'wd' to appear
- From: Frederick Gotham <cauldwell.thomas@xxxxxxxxx>
- Re: [PATCH] lds: Fix alignment of initcall table
- From: Sam Ravnborg <sam@xxxxxxxxxxxx>
- [PATCH] lds: Fix alignment of initcall table
- From: Christian Eggers <ceggers@xxxxxxx>
- Re: [RFC PATCH 0/7] usb: dwc2 host driver
- From: Jules Maselbas <jmaselbas@xxxxxxxxx>
- RE: [yocto] #yocto bootchooser: Cannot get state 'state'
- From: Hans-Ulrich Schlieben <hu.schlieben@xxxxxxxxxxxxxx>
- RE: [yocto] #yocto bootchooser: Cannot get state 'state'
- From: Hans-Ulrich Schlieben <hu.schlieben@xxxxxxxxxxxxxx>
- Re: [PATCH] Revert "clocksource: ARMv8 timer can only be built on ARMv8"
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- Re: [PATCH 1/5] k1c: Initial Kalray Coolidge (k1c) architecture support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 1/5] k1c: Initial Kalray Coolidge (k1c) architecture support
- From: Clément Leger <cleger@xxxxxxxxx>
- Re: [PATCH 1/5] k1c: Initial Kalray Coolidge (k1c) architecture support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 1/5] k1c: Initial Kalray Coolidge (k1c) architecture support
- From: Clément Leger <cleger@xxxxxxxxx>
- [PATCH] fs: jffs2: add initial support for reading jffs2
- From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
- Re: [PATCH 1/5] k1c: Initial Kalray Coolidge (k1c) architecture support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 1/5] k1c: Initial Kalray Coolidge (k1c) architecture support
- From: Clément Leger <cleger@xxxxxxxxx>
- Re: [PATCH 0/5] Add support for Kalray k1c core
- From: Clément Leger <cleger@xxxxxxxxx>
- Re: [PATCH 0/5] Add support for Kalray k1c core
- From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
- Re: [PATCH 0/5] Add support for Kalray k1c core
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 0/5] Add support for Kalray k1c core
- From: Clément Leger <cleger@xxxxxxxxx>
- Re: [PATCH 1/5] k1c: Initial Kalray Coolidge (k1c) architecture support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 0/5] Add support for Kalray k1c core
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 0/5] Add support for Kalray k1c core
- From: Clément Leger <cleger@xxxxxxxxx>
- Re: [PATCH] MIPS: actually use CONFIG_MIPS_RELOCATION_TABLE_SIZE
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] Revert "clocksource: ARMv8 timer can only be built on ARMv8"
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] imx25: drop global over-current setting for USB
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] ARM: qemu-virt64: convert to assembly entry
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 0/5] Add support for Kalray k1c core
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [RFC PATCH 0/7] usb: dwc2 host driver
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [yocto] #yocto bootchooser: Cannot get state 'state'
- From: Enrico Joerns <ejo@xxxxxxxxxxxxxx>
- Re: [yocto] #yocto bootchooser: Cannot get state 'state'
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- RE: [yocto] #yocto bootchooser: Cannot get state 'state'
- From: Hans-Ulrich Schlieben <hu.schlieben@xxxxxxxxxxxxxx>
- Re: [yocto] #yocto bootchooser: Cannot get state 'state'
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- Re: [yocto] #yocto bootchooser: Cannot get state 'state'
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- RE: [yocto] #yocto bootchooser: Cannot get state 'state'
- From: Hans-Ulrich Schlieben <hu.schlieben@xxxxxxxxxxxxxx>
- Re: [yocto] #yocto bootchooser: Cannot get state 'state'
- From: Enrico Joerns <ejo@xxxxxxxxxxxxxx>
- [PATCH] MIPS: actually use CONFIG_MIPS_RELOCATION_TABLE_SIZE
- From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
- [PATCH] Revert "clocksource: ARMv8 timer can only be built on ARMv8"
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- [PATCH 2/5] k1c: Add processor definitions
- From: Clement Leger <cleger@xxxxxxxxx>
- [PATCH 5/5] watchdog: k1c: Add k1c watchdog support
- From: Clement Leger <cleger@xxxxxxxxx>
- [PATCH 3/5] k1c: Add support for device tree
- From: Clement Leger <cleger@xxxxxxxxx>
- [PATCH 1/5] k1c: Initial Kalray Coolidge (k1c) architecture support
- From: Clement Leger <cleger@xxxxxxxxx>
- [PATCH 4/5] clocksource: k1c: Add k1c clocksource support
- From: Clement Leger <cleger@xxxxxxxxx>
- [PATCH 0/5] Add support for Kalray k1c core
- From: Clement Leger <cleger@xxxxxxxxx>
- [PATCH] imx25: drop global over-current setting for USB
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: qemu arm vexpress / virt32 support
- From: Wesley Chow <wes@xxxxxxxxxx>
- Re: [RFC 2/5] WIP: MIPS: implement dma mapping functions
- From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
- Re: qemu arm virt64 hangs
- From: Lucas Stach <dev@xxxxxxxxxx>
- [PATCH] ARM: qemu-virt64: convert to assembly entry
- From: Lucas Stach <dev@xxxxxxxxxx>
- Re: qemu arm vexpress / virt32 support
- From: Lucas Stach <dev@xxxxxxxxxx>
- qemu arm vexpress / virt32 support
- From: Wesley Chow <wes@xxxxxxxxxx>
- qemu arm virt64 hangs
- From: Wesley Chow <wes@xxxxxxxxxx>
- Re: [RFC PATCH 0/7] usb: dwc2 host driver
- From: Jules Maselbas <jmaselbas@xxxxxxxxx>
- [PATCH] pinctrl-single: Handle "pinctrl-single, function-mask" dt property
- From: Clement Leger <cleger@xxxxxxxxx>
- Re: [RFC PATCH 0/7] usb: dwc2 host driver
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- barebox-2020.01.0
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [RFC PATCH 7/7] usb: dwc2: Read dr_mode from device tree
- From: Jules Maselbas <jmaselbas@xxxxxxxxx>
- [RFC PATCH 1/7] usb: dwc2: Add host controller driver
- From: Jules Maselbas <jmaselbas@xxxxxxxxx>
- [RFC PATCH 6/7] usb: dwc2: Rewrite dwc2_hc_init
- From: Jules Maselbas <jmaselbas@xxxxxxxxx>
- [RFC PATCH 4/7] usb: dwc2: Rework roothub interface
- From: Jules Maselbas <jmaselbas@xxxxxxxxx>
- [RFC PATCH 3/7] usb: dwc2: Dynamic fifo size support from Linux
- From: Jules Maselbas <jmaselbas@xxxxxxxxx>
- [RFC PATCH 2/7] usb: dwc2: host: Handle dma mapping errors
- From: Jules Maselbas <jmaselbas@xxxxxxxxx>
- [RFC PATCH 5/7] HACK: usb: dwc2: Fix toggle reset
- From: Jules Maselbas <jmaselbas@xxxxxxxxx>
- [RFC PATCH 0/7] usb: dwc2 host driver
- From: Jules Maselbas <jmaselbas@xxxxxxxxx>
- Re: [PATCH] MIPS: dts: rename tplink-mr3020.dts -> ar9331_tl_mr3020.dts
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] usb: ehci: Do not use memset on dma coherent memory
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 1/3] serial: cadence: move register definitions into header file
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] ARM: zynq: zed: partially revert zynq_cpu_lowlevel_init() chnages
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 1/2] PCI: layerscape: rename variable
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 2/2] PCI: layerscape: Fixup iommu-map properties
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 3/3] ARM: zynq: zedboard: add PBL console support
- From: Lucas Stach <dev@xxxxxxxxxx>
- [PATCH 2/3] serial: cadence: add lowlevel init and putc functions
- From: Lucas Stach <dev@xxxxxxxxxx>
- [PATCH 1/3] serial: cadence: move register definitions into header file
- From: Lucas Stach <dev@xxxxxxxxxx>
- [PATCH] ARM: zynq: zed: partially revert zynq_cpu_lowlevel_init() chnages
- From: Lucas Stach <dev@xxxxxxxxxx>
- Re: [RFC 3/5] net: e1000: make it work on MIPS
- From: Lucas Stach <dev@xxxxxxxxxx>
- Re: barebox for iMX8MMini crashes while usb_rescan for USB type A
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [RFC 2/5] WIP: MIPS: implement dma mapping functions
- From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
- barebox for iMX8MMini crashes while usb_rescan for USB type A
- From: "Albert, Elmar" <EAlbert@xxxxxxxxxxxxxx>
- Re: [RFC 3/5] net: e1000: make it work on MIPS
- From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
- Re: [RFC 4/5] net: rtl8169: make it work on big-endian system
- From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
- Re: [RFC 1/5] WIP: MIPS: configure ebase according CONFIG_MMU
- From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
- [PATCH 0/5] ARM: Layerscape: Add Fixups for Linux IOMMU support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 1/5] ARM: Layerscape: replace overcomplicated macros
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 5/5] ARM: Layerscape: setup icids for the IOMMU
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 3/5] include/soc/fsl: Make struct ccsr_qman v3 specific
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 2/5] include/soc/fsl: remove unused function prototypes
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 4/5] net: fsl-fman: Do not put hardware in reset before Linux start
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] images: gitignore more files
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [RFC 5/5] MIPS: qemu-malta_defconfig: enable e1000 network driver
- From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
- [RFC 4/5] net: rtl8169: make it work on big-endian system
- From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
- [RFC 2/5] WIP: MIPS: implement dma mapping functions
- From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
- [RFC 3/5] net: e1000: make it work on MIPS
- From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
- [RFC 0/5] WIP: MIPS: implement dma mapping functions
- From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
- [RFC 1/5] WIP: MIPS: configure ebase according CONFIG_MMU
- From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
- [PATCH] MIPS: dts: rename tplink-mr3020.dts -> ar9331_tl_mr3020.dts
- From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
- Re: [PATCH] include/linux/amba/bus.h: drop unused declarations
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 1/3] esdhc-pbl: allow to skip starting i.MX8 image
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH v3] habv4: imx change signing area from full to the executed image
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 1/2] ARM: zynq: add Zynq specific lowlevel CPU init function
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [RFC PATCH 3/5] mci: add first-stage at91-sdhci driver
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [RFC PATCH 2/5] fs: fat: extend for in-PBL support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] include/linux/amba/bus.h: drop unused declarations
- From: Antony Pavlov <antonynpavlov@xxxxxxxxx>
- Re: Watchdog Timer with x86 processor
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- Re: Watchdog Timer with x86 processor
- From: Frederick Gotham <cauldwell.thomas@xxxxxxxxx>
- [PATCH 1/3] esdhc-pbl: allow to skip starting i.MX8 image
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- [PATCH 3/3] esdhc-pbl: remove now unused imx8_esdhc_load_piggy
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- [PATCH 2/3] ARM: nxp-imx8mq-evk: fix second stage booting
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- [PATCH 3/4] ARM: bcm2835 mbox: use pr_* to print messages
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 2/4] gpio: Add raspberrypi exp gpio driver
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 1/4] ARM: bcm2835 mbox: Remove response valid check
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 4/4] ARM: rpi_defconfig: Enable raspberry GPIO exp driver
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: Why the internal kernel header?
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Why the internal kernel header?
- From: Frederick Gotham <cauldwell.thomas@xxxxxxxxx>
- [PATCH v3] habv4: imx change signing area from full to the executed image
- From: Maik Otto <m.otto@xxxxxxxxx>
- [PATCH 1/2] ARM: zynq: add Zynq specific lowlevel CPU init function
- From: Lucas Stach <dev@xxxxxxxxxx>
- [PATCH 2/2] ARM: zynq: zed: use zynq_cpu_lowlevel_init()
- From: Lucas Stach <dev@xxxxxxxxxx>
- [RFC PATCH 3/5] mci: add first-stage at91-sdhci driver
- From: Ahmad Fatoum <ahmad@xxxxxx>
- [RFC PATCH 2/5] fs: fat: extend for in-PBL support
- From: Ahmad Fatoum <ahmad@xxxxxx>
- [RFC PATCH 4/5] ARM: at91: add helpers for MCI barebox chain-loading
- From: Ahmad Fatoum <ahmad@xxxxxx>
- [RFC PATCH 1/5] pbl: add block I/O API
- From: Ahmad Fatoum <ahmad@xxxxxx>
- [RFC PATCH 0/5] fs: fat: extend for in-PBL support
- From: Ahmad Fatoum <ahmad@xxxxxx>
- [RFC PATCH 5/5] [WIP] ARM: at91: sama5d27-som1: add first stage entry point
- From: Ahmad Fatoum <ahmad@xxxxxx>
- Re: [PATCH v2] habv4: imx change signing area from full to the executed image
- From: Maik Otto <m.otto@xxxxxxxxx>
- Re: Watchdog Timer with x86 processor
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- Re: Watchdog Timer with x86 processor
- From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
- Watchdog Timer with x86 processor
- From: Frederick Gotham <cauldwell.thomas@xxxxxxxxx>
- Re: [PATCH] ARM: nitrogen6: add lowlevel UART initialization
- From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
- Re: [PATCH] ARM: nitrogen6: add lowlevel UART initialization
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- Re: [PATCH] MIPS: loongson: rename CPU_LOONGSON1 to CPU_GS232
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH v2] habv4: imx change signing area from full to the executed image
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] ARM: nitrogen6: add lowlevel UART initialization
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- [PATCH] ARM: nitrogen6: add lowlevel UART initialization
- From: Rouven Czerwinski <r.czerwinski@xxxxxxxxxxxxxx>
- Re: [PATCH] lds: align RO_DATA_SECTION members
- From: Sam Ravnborg <sam@xxxxxxxxxxxx>
- Re: STM32MP1 SoC support in latest Barebox
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- Re: [PATCH v2] habv4: imx change signing area from full to the executed image
- From: Marcin Niestrój <m.niestroj@xxxxxxxxxxxxxxxx>
- Re: [PATCH 1/3] ARM64: entry: save/restore potentially clobbered registers
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- [PATCH 09/10] usb: Add dwc2 host driver
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 1/3] ARM64: entry: save/restore potentially clobbered registers
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- Re: [PATCH 1/3] ARM64: entry: save/restore potentially clobbered registers
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- Re: [PATCH v2] habv4: imx change signing area from full to the executed image
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] fixup! ARM: zii-imx8mq-dev: add DT fixups
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 1/4] ARM: nxp-imx8mq-evk: switch to SPDX license header
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 0/3] ARM64 early cache fixes
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH v2] lds: align RO_DATA_SECTION members
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 1/4] clk: zynq: add QSPI reference clock
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] ARM: aarch64: Add support for passing initrd to Linux
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] ARM: i.MX: Fix PBL size test
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 03/10] device: Introduce dma_offset
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 07/10] rpi: Enable USB Power domain during startup
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 05/10] usb: Add usbroothubdes.h
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 08/10] usb: Forward error code from usb_set_configuration
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 04/10] of: Read dma_offset from device tree
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 00/10] Add Raspberry Pi USB support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 02/10] of: Add of_bus_n_xxx_cells()
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 10/10] ARM: rpi_defconfig: Enable networking support
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 06/10] regulator: add function to get regulator by its name
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 01/10] usb: Make timeout unit clear
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 3/4] ARM: nxp-imx8mq-evk: clean up nxp_imx8mq_evk_start
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- [PATCH 4/4] ARM: nxp-imx8mq-evk: fix bootflow comment
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- [PATCH 2/4] ARM: nxp-imx8mq-evk: switch the PBL memcpy parameters to common variables
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- [PATCH 1/4] ARM: nxp-imx8mq-evk: switch to SPDX license header
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- [PATCH] fixup! ARM: zii-imx8mq-dev: add DT fixups
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- Re: [PATCH] driver: add function to look up device by DT node
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- Re: [PATCH] driver: add function to look up device by DT node
- From: Peter Mamonov <pmamonov@xxxxxxxxx>
- [PATCH] driver: add function to look up device by DT node
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- [PATCH 3/3] ARM: cache_64: invalidate icache in arm_early_mmu_cache_flush
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- [PATCH 2/3] ARM: cache_64: invalidate dcache in arm_early_mmu_cache_invalidate
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- [PATCH 1/3] ARM64: entry: save/restore potentially clobbered registers
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- [PATCH 0/3] ARM64 early cache fixes
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- [PATCH v2] lds: align RO_DATA_SECTION members
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- USB type-A in imx8mm
- From: "Yazdani, Reyhaneh" <RYazdani@xxxxxxxxxxxxxx>
- [PATCH] ARM: rpi: Do not warn when firmware doesn't pass a dtb
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 3/4] ARM: zynq: add QSPI DT node
- From: Lucas Stach <dev@xxxxxxxxxx>
- [PATCH 2/4] spi: add Zynq QSPI controller driver
- From: Lucas Stach <dev@xxxxxxxxxx>
- [PATCH 4/4] ARM: zynq: zed: add QSPI flash support
- From: Lucas Stach <dev@xxxxxxxxxx>
- [PATCH 1/4] clk: zynq: add QSPI reference clock
- From: Lucas Stach <dev@xxxxxxxxxx>
- Re: [PATCH 2/3] ARM: zii-imx8mq-dev: add DT fixups
- From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
- [PATCH] ARM: aarch64: Add support for passing initrd to Linux
- From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
- Re: [PATCH 2/3] ARM: zii-imx8mq-dev: add DT fixups
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- Re: [PATCH 2/3] ARM: zii-imx8mq-dev: add DT fixups
- From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
- Re: [PATCH 2/3] ARM: zii-imx8mq-dev: add DT fixups
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- Re: [PATCH 2/3] ARM: zii-imx8mq-dev: add DT fixups
- From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
- [PATCH v2] habv4: imx change signing area from full to the executed image
- From: Maik Otto <m.otto@xxxxxxxxx>
- Re: [PATCH] ARM: rdu1: add default environment
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 1/3] RDU2: add support to boot from SD card autonomosly
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] ARM: rdu-common: restart machine after fixing i210 device ID
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 1/3] ARM: zii-imx8mq-dev: make eMMC update target the default
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] ARM: rdu1: add default environment
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- [PATCH 3/3] ARM: rdu2: fixup touchscreen alias
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- [PATCH 2/3] ARM: rdu2: don't reduce i2c frequency for eGalax touch
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- [PATCH 1/3] RDU2: add support to boot from SD card autonomosly
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- [PATCH] ARM: rdu-common: restart machine after fixing i210 device ID
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- [PATCH 3/3] ARM: zii-imx8mq-dev: fixup touchscreen and ethernet switch alias
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- [PATCH 1/3] ARM: zii-imx8mq-dev: make eMMC update target the default
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- [PATCH 2/3] ARM: zii-imx8mq-dev: add DT fixups
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- Re: imx-usb-loader on imx8mq/mm
- From: "Yazdani, Reyhaneh" <RYazdani@xxxxxxxxxxxxxx>
- [PATCH 2/4] cdev: Add discard_range hook
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 0/4] add discard_range to improve write speed on block devices
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 3/4] block: Implement discard_range
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 1/4] fs: Introduce discard_range()
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 4/4] copy_file: call discard_range on destination file
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [BUG] imx6qdl: degraded eMMC write performance
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 1/2] ARM: omap: support for WAGO PFC200v3 750-821x
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- Re: [PATCH 1/2] ARM: omap: support for WAGO PFC200v3 750-821x
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] commands: led: print actual error code when led_set fails
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] led: pca955x: remove ineffectual assignment
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] commands: miitool: handle powerdown-flag
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] habv4: add the possibility to changing the signing area from Kconfig
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: imx-usb-loader on imx8mq/mm
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: imx-usb-loader on imx8mq/mm
- From: "Yazdani, Reyhaneh" <RYazdani@xxxxxxxxxxxxxx>
- [PATCH] commands: led: print actual error code when led_set fails
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- [PATCH] led: pca955x: remove ineffectual assignment
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- Re: imx-usb-loader on imx8mq/mm
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- imx-usb-loader on imx8mq/mm
- From: "Yazdani, Reyhaneh" <RYazdani@xxxxxxxxxxxxxx>
- Re: [PATCH v3 1/7] ARM: dts: imx6: pcaaxl3: Order nodes alphabetically
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH 2/2] ARM: omap: reword MACH_WAGO_PFC_AM35XX kconfig help text
- From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
- [PATCH 1/2] ARM: omap: support for WAGO PFC200v3 750-821x
- From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
- [PATCH v3 6/7] ARM: dts: imx6: phycard: Use gpio binding constants
- From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
- [PATCH v3 7/7] ARM: dts: imx6: phytec: Increase NAND barebox partition size
- From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
- [PATCH v3 5/7] ARM: dts: imx6: phycard: Switch to new partitions binding
- From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
- [PATCH v3 4/7] ARM: dts: imx6: phycard: Make eeprom configurable
- From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
- [PATCH v3 3/7] ARM: dts: imx6: pcaaxl3: Make use of the simpler name phycard
- From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
- [PATCH v3 1/7] ARM: dts: imx6: pcaaxl3: Order nodes alphabetically
- From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
- [PATCH v3 2/7] ARM: dts: imx6: pcaaxl3: Update license and model description
- From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
- [PATCH] commands: miitool: handle powerdown-flag
- From: Hubert Feurstein <h.feurstein@xxxxxxxxx>
- Re: [PATCH] habv4: add the possibility to changing the signing area from Kconfig
- From: Maik Otto <m.otto@xxxxxxxxx>
- Re: [PATCH 1/4] ARM: zynq: zedboard: split out PS7 init
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 1/1] mci: imx-esdhc: fix termination of statement
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH v2] Allow usage of default environment without environment file storage
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] of: demote most debug output to loglevel 8 (vdebug)
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] commands: digest: don't be to restrictive with the length of verification files
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 1/4] led: unify led trigger tables
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH v2] firmware: zynqmp-fpga: drop example bin format header
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] mtd: spi-nor: Add support for en25qh64
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH v2 1/3] images: i.MX: rearrange image rules in preparation for boilerplate removal
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] habv4: add the possibility to changing the signing area from Kconfig
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] habv4: add the possibility to changing the signing area from Kconfig
- From: Maik Otto <m.otto@xxxxxxxxx>
- [PATCH 3/4] filetype: add Zynq image type
- From: Lucas Stach <dev@xxxxxxxxxx>
- [PATCH 1/4] ARM: zynq: zedboard: split out PS7 init
- From: Lucas Stach <dev@xxxxxxxxxx>
- [PATCH 2/4] ARM: zynq: zedboard: allow lowlevel init to be called as second stage
- From: Lucas Stach <dev@xxxxxxxxxx>
- [PATCH 4/4] ARM: zynq: add Zynq image bootm handler
- From: Lucas Stach <dev@xxxxxxxxxx>
- [PATCH] of: demote most debug output to loglevel 8 (vdebug)
- From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
- Re: [BUG] imx6qdl: degraded eMMC write performance
- From: Hubert Feurstein <h.feurstein@xxxxxxxxx>
- [PATCH] commands: digest: don't be to restrictive with the length of verification files
- From: Hubert Feurstein <h.feurstein@xxxxxxxxx>
- [PATCH 3/4] led: check for 'barebox, default-trigger' when 'linux, default-trigger' is not found
- From: Hubert Feurstein <h.feurstein@xxxxxxxxx>
- [PATCH 1/4] led: unify led trigger tables
- From: Hubert Feurstein <h.feurstein@xxxxxxxxx>
- [PATCH 4/4] led: parse panic-indicator from device-tree
- From: Hubert Feurstein <h.feurstein@xxxxxxxxx>
- [PATCH 2/4] led: add documentation for net-tx and net-rx triggers
- From: Hubert Feurstein <h.feurstein@xxxxxxxxx>
- Re: [BUG] imx6qdl: degraded eMMC write performance
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [BUG] imx6qdl: degraded eMMC write performance
- From: Hubert Feurstein <h.feurstein@xxxxxxxxx>
- Re: [PATCH] habv4: add the possibility to changing the signing area from Kconfig
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [BUG] imx6qdl: degraded eMMC write performance
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] habv4: add the possibility to changing the signing area from Kconfig
- From: Maik Otto <m.otto@xxxxxxxxx>
- [PATCH 1/1] mci: imx-esdhc: fix termination of statement
- From: Hubert Feurstein <h.feurstein@xxxxxxxxx>
- [BUG] imx6qdl: degraded eMMC write performance
- From: Hubert Feurstein <h.feurstein@xxxxxxxxx>
- Re: [PATCH v2 5/8] ARM: dts: imx6: phycard: Use partname for environment device-path
- From: Stefan Riedmüller <s.riedmueller@xxxxxxxxx>
- [PATCH v2] firmware: zynqmp-fpga: drop example bin format header
- From: Michael Tretter <m.tretter@xxxxxxxxxxxxxx>
- Re: [PATCH] firmware: zynmp-fpga: drop example bin format header
- From: Thomas Hämmerle <Thomas.Haemmerle@xxxxxxxxxxxxxx>
- Re: [PATCH v2 5/8] ARM: dts: imx6: phycard: Use partname for environment device-path
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH v2 5/8] ARM: dts: imx6: phycard: Use partname for environment device-path
- From: Stefan Riedmüller <s.riedmueller@xxxxxxxxx>
- Re: [PATCH v2 5/8] ARM: dts: imx6: phycard: Use partname for environment device-path
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH v2 5/8] ARM: dts: imx6: phycard: Use partname for environment device-path
- From: Stefan Riedmüller <s.riedmueller@xxxxxxxxx>
- Re: [PATCH v2 5/8] ARM: dts: imx6: phycard: Use partname for environment device-path
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] mtd: spi-nor: Add support for en25qh64
- From: Ulrich Ölmann <u.oelmann@xxxxxxxxxxxxxx>
- [PATCH v2 1/3] images: i.MX: rearrange image rules in preparation for boilerplate removal
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- [PATCH v2 2/3] ARM: i.MX: introduce imx_image_rule variable for code deduplication
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- [PATCH v2 3/3] ARM: i.MX: rebuild .imximg if DCD table in .imxcfg changes
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- [PATCH] firmware: zynmp-fpga: drop example bin format header
- From: Michael Tretter <m.tretter@xxxxxxxxxxxxxx>
- Re: [PATCH 2/3] ARM: i.MX: introduce imx_image_rule variable for code deduplication
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- Re: [PATCH 2/3] ARM: i.MX: introduce imx_image_rule variable for code deduplication
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH v2 8/8] ARM: dts: imx6: phytec: Increase NAND barebox partition size
- From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
- [PATCH v2 6/8] ARM: dts: imx6: phycard: Switch to new partitions binding
- From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
- [PATCH v2 5/8] ARM: dts: imx6: phycard: Use partname for environment device-path
- From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
- [PATCH v2 7/8] ARM: dts: imx6: phycard: Use gpio binding constants
- From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
- [PATCH v2 3/8] ARM: dts: imx6: pcaaxl3: Make use of the simpler name phycard
- From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
- [PATCH v2 1/8] ARM: dts: imx6: pcaaxl3: Order nodes alphabetically
- From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
- [PATCH v2 4/8] ARM: dts: imx6: phycard: Make eeprom configurable
- From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
- [PATCH v2 2/8] ARM: dts: imx6: pcaaxl3: Update license and model description
- From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
- Re: [PATCH v2 2/4] image-metadata: add flags field to imd_header
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- v2019.12.0
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH v2] Allow usage of default environment without environment file storage
- From: Albert Schwarzkopf <a.schwarzkopf@xxxxxxxxx>
- Re: [PATCH 2/7] ARM: dts: imx6: pcaaxl3: Update license and model description
- From: Stefan Riedmüller <s.riedmueller@xxxxxxxxx>
- [PATCH v2 3/4] imd: add support for checksum generation/verification
- From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
- [PATCH v2 4/4] commands: bbu: add support for imd checksum
- From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
- [PATCH v2 2/4] image-metadata: add flags field to imd_header
- From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
- [PATCH v2 1/4] imd: replace magicvalue with sizeof(struct)
- From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
- Re: [PATCH 0/2] bus: efi: add basic ACPI bus infrastructure
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 8/9] pci: add EFI PCI root bridge IO protocol driver
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- Re: [PATCH 2/7] ARM: dts: imx6: pcaaxl3: Update license and model description
- From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
- Re: [PATCH] Revert "mci: core: make mci_register -EPROBE_DEFER sensitive"
- From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
- Re: [PATCH] lds: align RO_DATA_SECTION members
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
- [PATCH] Revert "mci: core: make mci_register -EPROBE_DEFER sensitive"
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] clk: i.MX6ul: Disable GPMI_IO clk before reparenting
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] mtd: spi-nor: fix wrong value for CR_QUAD_EN_SPAN
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH 1/3] images: i.MX: rearrange image rules in preparation for boilerplate removal
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] lds: align RO_DATA_SECTION members
- From: Sam Ravnborg <sam@xxxxxxxxxxxx>
- [PATCH 7/7] ARM: dts: imx6: phytec: Increase NAND barebox partition size
- From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
- [PATCH 6/7] ARM: dts: imx6: phycard: Switch to new partitions binding
- From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
- [PATCH 5/7] ARM: dts: imx6: phycard: Use partname for environment device-path
- From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
- [PATCH 4/7] ARM: dts: imx6: phycard: Make eeprom configurable
- From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
- [PATCH 2/7] ARM: dts: imx6: pcaaxl3: Update license and model description
- From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
- [PATCH 1/7] ARM: dts: imx6: pcaaxl3: Order nodes alphabetically
- From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
- [PATCH 3/7] ARM: dts: imx6: pcaaxl3: Make use of the simpler name phycard
- From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
- Re: Writing to ubifs
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH] lds: align RO_DATA_SECTION members
- From: Lucas Stach <dev@xxxxxxxxxx>
- Writing to ubifs
- From: Patrick Schneider <patrick.schneider@xxxxxxxxxxx>
- Re: [PATCH] README: add section about contributing to barebox
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: use #!/usr/bin/env binary instead of #!/usr/bin/binary
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] ARM: boards: phytec-som-imx6: Replace spi by spi-nor in bootsource script
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- Re: [PATCH] ARM: dts: imx6qdl: phycore: Remove emmc vmmc-supply
- From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
- [PATCH v3 4/4] docs: use #!/usr/bin/env python shebang instead of #!/usr/bin/python
- From: Florian Klink <flokli@xxxxxxxxx>
- [PATCH v3 3/4] docs: use #!/usr/bin/env bash shebang instead of #!/bin/bash
- From: Florian Klink <flokli@xxxxxxxxx>
- [PATCH v3 2/4] dts/scripts: use #!/usr/bin/env bash shebang instead of #!/bin/bash
- From: Florian Klink <flokli@xxxxxxxxx>
- use #!/usr/bin/env binary instead of #!/usr/bin/binary
- From: Florian Klink <flokli@xxxxxxxxx>
- [PATCH v3 1/4] scripts: use #!/usr/bin/env bash shebang instead of #!/bin/bash
- From: Florian Klink <flokli@xxxxxxxxx>
- [PATCH] README: add section about contributing to barebox
- From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
- Re: [PATCH v2 1/4] scripts: use #!/usr/bin/env bash shebang instead of #!/bin/bash
- From: Roland Hieber <rhi@xxxxxxxxxxxxxx>
- [PATCH v2 3/4] docs: use #!/usr/bin/env bash shebang instead of #!/bin/bash
- From: Florian Klink <flokli@xxxxxxxxx>
- [PATCH v2 4/4] docs: use #!/usr/bin/env python shebang instead of #!/usr/bin/python
- From: Florian Klink <flokli@xxxxxxxxx>
- [PATCH v2 2/4] dts/scripts: use #!/usr/bin/env bash shebang instead of #!/bin/bash
- From: Florian Klink <flokli@xxxxxxxxx>
- [PATCH v2 1/4] scripts: use #!/usr/bin/env bash shebang instead of #!/bin/bash
- From: Florian Klink <flokli@xxxxxxxxx>
- Re: [PATCH] ARM: dts: imx6qdl: phycore: Remove emmc vmmc-supply
- From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
- Re: [PATCH] ARM: dts: imx6qdl: phycore: Remove emmc vmmc-supply
- From: Stefan Riedmüller <s.riedmueller@xxxxxxxxx>
[Index of Archives]
[Linux Embedded]
[Linux USB Devel]
[Video for Linux]
[Linux SCSI]
[Samba]
[Yosemite News]