[PATCH v2 1/2] mci: imx-esdhc-pbl: Add support for IMX7

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Anees Rehman <anees.rehman@xxxxxxxxxxxxxx>

Signed-off-by: Anees Rehman <anees.r3hman@xxxxxxxxx>
---
 arch/arm/mach-imx/include/mach/xload.h |  1 +
 drivers/mci/imx-esdhc-pbl.c            | 37 ++++++++++++++++++++++++++
 2 files changed, 38 insertions(+)

diff --git a/arch/arm/mach-imx/include/mach/xload.h b/arch/arm/mach-imx/include/mach/xload.h
index 05022e9d0..94b2f3761 100644
--- a/arch/arm/mach-imx/include/mach/xload.h
+++ b/arch/arm/mach-imx/include/mach/xload.h
@@ -5,6 +5,7 @@ int imx53_nand_start_image(void);
 int imx6_spi_load_image(int instance, unsigned int flash_offset, void *buf, int len);
 int imx6_spi_start_image(int instance);
 int imx6_esdhc_start_image(int instance);
+int imx7_esdhc_start_image(int instance);
 int imx8m_esdhc_load_image(int instance, bool start);
 int imx8mp_esdhc_load_image(int instance, bool start);
 
diff --git a/drivers/mci/imx-esdhc-pbl.c b/drivers/mci/imx-esdhc-pbl.c
index 5c382bbcc..10a008280 100644
--- a/drivers/mci/imx-esdhc-pbl.c
+++ b/drivers/mci/imx-esdhc-pbl.c
@@ -21,6 +21,7 @@
 #ifdef CONFIG_ARCH_IMX
 #include <mach/atf.h>
 #include <mach/imx6-regs.h>
+#include <mach/imx7-regs.h>
 #include <mach/imx8mq-regs.h>
 #include <mach/imx8mm-regs.h>
 #include <mach/imx-header.h>
@@ -265,6 +266,42 @@ int imx6_esdhc_start_image(int instance)
 	return esdhc_load_image(&host, 0x10000000, 0x10000000, 0, SZ_1K, true);
 }
 
+/**
+ * imx7_esdhc_start_image - Load and start an image from USDHC controller
+ * @instance: The USDHC controller instance (0..2)
+ *
+ * This uses esdhc_start_image() to load an image from SD/MMC.  It is
+ * assumed that the image is the currently running barebox image (This
+ * information is used to calculate the length of the image). The
+ * image is started afterwards.
+ *
+ * Return: If successful, this function does not return. A negative error
+ * code is returned when this function fails.
+ */
+int imx7_esdhc_start_image(int instance)
+{
+	struct esdhc_soc_data data;
+	struct fsl_esdhc_host host;
+
+	switch (instance) {
+	case 0:
+		host.regs = IOMEM(MX7_USDHC1_BASE_ADDR);
+		break;
+	case 1:
+		host.regs = IOMEM(MX7_USDHC2_BASE_ADDR);
+		break;
+	case 2:
+		host.regs = IOMEM(MX7_USDHC3_BASE_ADDR);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	imx_esdhc_init(&host, &data);
+
+	return esdhc_load_image(&host, 0x80000000, 0x80000000, 0, SZ_1K, true);
+}
+
 /**
  * imx8m_esdhc_load_image - Load and optionally start an image from USDHC controller
  * @instance: The USDHC controller instance (0..2)
-- 
2.28.0


_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox



[Index of Archives]     [Linux Embedded]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux