[PATCH 17/20] net: phy: realtek: handle RX delay setting

[Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>]

RX delay and TX delay can be configured independently on the RTL8211F.
Decode the phy mode setting and set both bits accordingly. This is based
on Linux commit 1b3047b5208a ("net: phy: realtek: add support for
configuring the RX delay on RTL8211F")

Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
---
 drivers/net/phy/realtek.c | 48 ++++++++++++++++++++++++++++++++-------
 1 file changed, 40 insertions(+), 8 deletions(-)

diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
index 4ae050128c..695a6c384d 100644
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c
@@ -34,6 +34,7 @@
 #define RTL8211F_INSR				0x1d
 
 #define RTL8211F_TX_DELAY			BIT(8)
+#define RTL8211F_RX_DELAY			BIT(3)
 
 #define RTL8201F_ISR				0x1e
 #define RTL8201F_IER				0x13
@@ -84,19 +85,50 @@ static int rtl8211c_config_init(struct phy_device *phydev)
 
 static int rtl8211f_config_init(struct phy_device *phydev)
 {
+	struct device_d *dev = &phydev->dev;
+	u16 val_txdly, val_rxdly;
 	int ret;
-	u16 val = 0;
 
-	ret = genphy_config_init(phydev);
-	if (ret < 0)
+	switch (phydev->interface) {
+	case PHY_INTERFACE_MODE_RGMII:
+		val_txdly = 0;
+		val_rxdly = 0;
+		break;
+
+	case PHY_INTERFACE_MODE_RGMII_RXID:
+		val_txdly = 0;
+		val_rxdly = RTL8211F_RX_DELAY;
+		break;
+
+	case PHY_INTERFACE_MODE_RGMII_TXID:
+		val_txdly = RTL8211F_TX_DELAY;
+		val_rxdly = 0;
+		break;
+
+	case PHY_INTERFACE_MODE_RGMII_ID:
+		val_txdly = RTL8211F_TX_DELAY;
+		val_rxdly = RTL8211F_RX_DELAY;
+		break;
+
+	default: /* the rest of the modes imply leaving delay as is. */
+		return 0;
+	}
+
+	ret = phy_modify_paged(phydev, 0xd08, 0x11, RTL8211F_TX_DELAY,
+			       val_txdly);
+	if (ret < 0) {
+		dev_err(dev, "Failed to update the TX delay register\n");
 		return ret;
+	}
 
-	/* enable TX-delay for rgmii-id and rgmii-txid, otherwise disable it */
-	if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
-	    phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
-		val = RTL8211F_TX_DELAY;
+	ret = phy_modify_paged(phydev, 0xd08, 0x15, RTL8211F_RX_DELAY,
+			       val_rxdly);
+	if (ret < 0) {
+		dev_err(dev, "Failed to update the RX delay register\n");
+		return ret;
+	}
 
-	return phy_modify_paged(phydev, 0xd08, 0x11, RTL8211F_TX_DELAY, val);
+	return 0;
 }
 
 static int rtl8366rb_config_init(struct phy_device *phydev)
-- 
2.27.0


_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox