On Fri, Aug 14, 2020 at 10:15:04AM +0200, Jules Maselbas wrote:
> Hi Sascha,
>
> On Fri, Aug 14, 2020 at 08:21:03AM +0200, Sascha Hauer wrote:
> > Hi Jules,
> >
> > On Tue, Aug 11, 2020 at 05:16:26PM +0200, Jules Maselbas wrote:
> > > +
> > > +static int transfer_chunk(struct dwc2 *dwc2, u8 hc,
> > > + u8 *pid, int in, void *buffer, int num_packets,
> > > + int xfer_len, int *actual_len, int odd_frame)
> > > +{
> > > + uint32_t hctsiz, hcchar, sub;
> > > + dma_addr_t dma_addr;
> > > + int ret = 0;
> > > +
> > > + dma_addr = dma_map_single(dwc2->dev, buffer, xfer_len,
> > > + in ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
> > > +
> > > + dwc2_dbg(dwc2, "chunk: pid=%d xfer_len=%u pkts=%u dma_addr=%pad\n",
> > > + *pid, xfer_len, num_packets, (void *)dma_addr);
> > > +
> > > + dwc2_writel(dwc2, dma_addr, HCDMA(hc));
> > > +
> > > + hctsiz = (xfer_len << TSIZ_XFERSIZE_SHIFT)
> > > + | (1 << TSIZ_PKTCNT_SHIFT)
> > > + | (*pid << TSIZ_SC_MC_PID_SHIFT);
> >
> > Any reason to ignore num_packets here and hardcode 1 to the packet
> > count? This breaks transfers > 512 bytes in my case.
> Yes this is a mistake, it should be num_packets instead of 1.
> This must be an error I've made when porting the driver from u-boot.
>
> Should I send a fixup or a new patchset ?
I'll fix it up locally, no problem.
Sascha
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
