Linux USB Users

• Thread Index

• [PATCH for-5.8 1/2] usb: dwc3: meson-g12a: fix error path when fetching the reset line fails
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• [PATCH for-5.8 2/2] usb: dwc3: meson-g12a: fix USB2 PHY initialization on G12A and A1 SoCs
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• [PATCH for-5.8 0/2] dwc3: meson-g12a: two fixes for v5.8
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• Re: Unable to open(2) ep0 in ConfigFG FunctionFS Gadget
  • From: Krzysztof Opasiak <k.opasiak@xxxxxxxxxxx>
• Re: Kernel Oops in cdc_acm
  • From: Jean Rene Dawin <jdawin@xxxxxxxxxxxxxxxxxxxxx>
• Re: Unable to open(2) ep0 in ConfigFG FunctionFS Gadget
  • From: "Sid Spry" <sid@xxxxxxx>
• [PATCH v2 09/14] device core: Add ability to handle multiple dma offsets
  • From: Jim Quinlan <james.quinlan@xxxxxxxxxxxx>
• [PATCH v2 00/14] PCI: brcmstb: enable PCIe for STB chips
  • From: Jim Quinlan <james.quinlan@xxxxxxxxxxxx>
• Re: ttyACM: disabled by hub (EMI?), re-enabling... Causes garbage chars & disconnect
  • From: Joakim Tjernlund <Joakim.Tjernlund@xxxxxxxxxxxx>
• Re: [greybus-dev] [PATCH 8/8] net/iucv: Use the new device_to_pm() helper to access struct dev_pm_ops
  • From: Alex Elder <elder@xxxxxxxxxx>
• Re: ttyACM: disabled by hub (EMI?), re-enabling... Causes garbage chars & disconnect
  • From: Joakim Tjernlund <Joakim.Tjernlund@xxxxxxxxxxxx>
• Re: [PATCH 8/8] net/iucv: Use the new device_to_pm() helper to access struct dev_pm_ops
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH 8/8] net/iucv: Use the new device_to_pm() helper to access struct dev_pm_ops
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 8/8] net/iucv: Use the new device_to_pm() helper to access struct dev_pm_ops
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH 8/8] net/iucv: Use the new device_to_pm() helper to access struct dev_pm_ops
  • From: Krzysztof Wilczyński <kw@xxxxxxxxx>
• Re: [greybus-dev] [PATCH 1/8] driver core: Add helper for accessing Power Management callbacs
  • From: Krzysztof Wilczyński <kw@xxxxxxxxx>
• Re: [PATCH 8/8] net/iucv: Use the new device_to_pm() helper to access struct dev_pm_ops
  • From: Krzysztof Wilczyński <kw@xxxxxxxxx>
• [PATCH] usb/phy-generic: Add support for OTG VBUS supply control
  • From: Mike Looijmans <mike.looijmans@xxxxxxxx>
• [PATCH] CDC-ACM: heed quirk also in error handling
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• Re: [greybus-dev] [PATCH 3/8] greybus: Use the new device_to_pm() helper to access struct dev_pm_ops
  • From: Alex Elder <elder@xxxxxxxxxx>
• Re: [greybus-dev] [PATCH 1/8] driver core: Add helper for accessing Power Management callbacs
  • From: Alex Elder <elder@xxxxxxxxxx>
• Re: [PATCH v7 2/4] usb: dwc3: qcom: Add interconnect support in dwc3 driver
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• Re: [PATCH v7 2/4] usb: dwc3: qcom: Add interconnect support in dwc3 driver
  • From: Georgi Djakov <georgi.djakov@xxxxxxxxxx>
• Re: Kernel Oops in cdc_acm
  • From: Jean Rene Dawin <jdawin@xxxxxxxxxxxxxxxxxxxxx>
• Re: Kernel Oops in cdc_acm
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• Re: [PATCH v7 2/4] usb: dwc3: qcom: Add interconnect support in dwc3 driver
  • From: "Sandeep Maheswaram (Temp)" <sanm@xxxxxxxxxxxxxx>
• Re: [PATCH 2/8] ACPI: PM: Use the new device_to_pm() helper to access struct dev_pm_ops
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [GIT PULL] Thunderbolt/USB4 changes for v5.8 merge window
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: ttyACM: disabled by hub (EMI?), re-enabling... Causes garbage chars & disconnect
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• Re: [PATCH 2/8] ACPI: PM: Use the new device_to_pm() helper to access struct dev_pm_ops
  • From: Pavel Machek <pavel@xxxxxxx>
• [GIT PULL] Thunderbolt/USB4 changes for v5.8 merge window
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: ttyACM: disabled by hub (EMI?), re-enabling... Causes garbage chars & disconnect
  • From: Joakim Tjernlund <Joakim.Tjernlund@xxxxxxxxxxxx>
• Re: ttyACM: disabled by hub (EMI?), re-enabling... Causes garbage chars & disconnect
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• Re: [PATCH 5/8] usb: phy: fsl: Use the new device_to_pm() helper to access struct dev_pm_ops
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH 2/8] ACPI: PM: Use the new device_to_pm() helper to access struct dev_pm_ops
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH 7/8] PM: Use the new device_to_pm() helper to access struct dev_pm_ops
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [GIT PULL] usb: chipidea: changes for v5.8-rc1
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: Kernel Oops in cdc_acm
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• Re: [PATCH 8/8] net/iucv: Use the new device_to_pm() helper to access struct dev_pm_ops
  • From: Ursula Braun <ubraun@xxxxxxxxxxxxx>
• Microchip USB2642 Hub not resuming from USB autosuspend
  • From: Martin Kepplinger <martin.kepplinger@xxxxxxx>
• Re: [PATCH 8/8] net/iucv: Use the new device_to_pm() helper to access struct dev_pm_ops
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/8] driver core: Add helper for accessing Power Management callbacs
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• usb: dwc2: screaming interrupt after kexec reboot
  • From: Frank Mori Hess <fmh6jj@xxxxxxxxx>
• [GIT PULL] usb: chipidea: changes for v5.8-rc1
  • From: Peter Chen <peter.chen@xxxxxxx>
• Re: [PATCH v2 2/9] usb: cdns3: add runtime PM support
  • From: Peter Chen <peter.chen@xxxxxxx>
• Re: [PATCH v2 7/9] usb: host: xhci-plat: add priv flag for skip_phy_initialization
  • From: Peter Chen <peter.chen@xxxxxxx>
• Re: USB Security in the Linux Kernel
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Kernel Oops in cdc_acm
  • From: Jean Rene Dawin <jdawin@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 1/8] driver core: Add helper for accessing Power Management callbacs
  • From: Krzysztof Wilczyński <kw@xxxxxxxxx>
• [PATCH 3/8] greybus: Use the new device_to_pm() helper to access struct dev_pm_ops
  • From: Krzysztof Wilczyński <kw@xxxxxxxxx>
• [PATCH 8/8] net/iucv: Use the new device_to_pm() helper to access struct dev_pm_ops
  • From: Krzysztof Wilczyński <kw@xxxxxxxxx>
• [PATCH 7/8] PM: Use the new device_to_pm() helper to access struct dev_pm_ops
  • From: Krzysztof Wilczyński <kw@xxxxxxxxx>
• [PATCH 5/8] usb: phy: fsl: Use the new device_to_pm() helper to access struct dev_pm_ops
  • From: Krzysztof Wilczyński <kw@xxxxxxxxx>
• [PATCH 6/8] PCI/PM: Use the new device_to_pm() helper to access struct dev_pm_ops
  • From: Krzysztof Wilczyński <kw@xxxxxxxxx>
• [PATCH 4/8] scsi: pm: Use the new device_to_pm() helper to access struct dev_pm_ops
  • From: Krzysztof Wilczyński <kw@xxxxxxxxx>
• [PATCH 2/8] ACPI: PM: Use the new device_to_pm() helper to access struct dev_pm_ops
  • From: Krzysztof Wilczyński <kw@xxxxxxxxx>
• [PATCH 0/8] Add helper for accessing Power Management callbacs
  • From: Krzysztof Wilczyński <kw@xxxxxxxxx>
• Re: ttyACM: disabled by hub (EMI?), re-enabling... Causes garbage chars & disconnect
  • From: Joakim Tjernlund <Joakim.Tjernlund@xxxxxxxxxxxx>
• [Bug 207887] USB devices connected to Thinkpad Dock hangs after a while
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [Bug 207887] New: USB devices connected to Thinkpad Dock hangs after a while
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• Re: ttyACM: disabled by hub (EMI?), re-enabling... Causes garbage chars & disconnect
  • From: Joakim Tjernlund <Joakim.Tjernlund@xxxxxxxxxxxx>
• Re: ttyACM: disabled by hub (EMI?), re-enabling... Causes garbage chars & disconnect
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• ttyACM: disabled by hub (EMI?), re-enabling... Causes garbage chars & disconnect
  • From: Joakim Tjernlund <Joakim.Tjernlund@xxxxxxxxxxxx>
• Re: [PATCH 2/2] usb: serial: xr_serial: Add gpiochip support
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: cdc-wdm: Call wake_up_all() when clearing WDM_IN_USE bit.
  • From: Tetsuo Handa <penguin-kernel@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] usb: serial: xr_serial: Add gpiochip support
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• RE: [PATCH v2 7/9] usb: host: xhci-plat: add priv flag for skip_phy_initialization
  • From: Jun Li <jun.li@xxxxxxx>
• Re: Kernel Oops in cdc_acm
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• RE: [PATCH v2 2/9] usb: cdns3: add runtime PM support
  • From: Jun Li <jun.li@xxxxxxx>
• Re: [PATCH] USB: cdc-wdm: Call wake_up_all() when clearing WDM_IN_USE bit.
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• Kernel Oops in cdc_acm
  • From: Jean Rene Dawin <jdawin@xxxxxxxxxxxxxxxxxxxxx>
• Re: [GIT PULL] USB for v5.8 merge window
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• Re: [GIT PULL] USB for v5.8 merge window
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] usb: serial: xr_serial: Add gpiochip support
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] USB: serial: qcserial: Add DW5816e QDL support
  • From: Matt Jolly <kangie@footclan.ninja>
• Re: [PATCH 8/8] ARM: dts: r8a7742: Add xhci support
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 7/8] ARM: dts: r8a7742: Add USB-DMAC and HSUSB device nodes
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 6/8] ARM: dts: r8a7742: Add USB 2.0 host support
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 5/8] dt-bindings: usb: usb-xhci: Document r8a7742 support
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 4/8] dt-bindings: dmaengine: renesas,usb-dmac: Add binding for r8a7742
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 3/8] dt-bindings: usb: renesas,usbhs: Add support for r8a7742
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [GIT PULL] USB for v5.8 merge window
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• Re: [PATCH 2/8] dt-bindings: PCI: pci-rcar-gen2: Add device tree support for r8a7742
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 1/8] dt-bindings: phy: rcar-gen2: Add r8a7742 support
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v2] USB: serial: qcserial: Add DW5816e QDL support
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: XHCI vs PCM2903B/PCM2904 part 2
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/9] usb: cdns3: imx: add glue layer runtime pm implementation
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH 2/2] usb: serial: xr_serial: Add gpiochip support
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 1/1] thunderbolt: add trivial .shutdown
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: next/master bisection: baseline.login on meson-sm1-sei610
  • From: Guillaume Tucker <guillaume.tucker@xxxxxxxxxxxxx>
• Re: [PATCH v2 0/2] usb: dwc3: keystone: Turn on USB3 PHY before controller
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• [PATCH v2 2/2] usb: dwc3: keystone: Turn on USB3 PHY before controller
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v2 1/2] dt-bindings: usb: ti,keystone-dwc3.yaml: Add USB3.0 PHY property
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH v2 0/2] usb: dwc3: keystone: Turn on USB3 PHY before controller
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 3/3] usb: dwc3: keystone: Turn on USB3 PHY before controller
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 3/3] usb: dwc3: keystone: Turn on USB3 PHY before controller
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v2 3/9] usb: cdns3: imx: add glue layer runtime pm implementation
  • From: Peter Chen <peter.chen@xxxxxxx>
• Re: [PATCH v2 3/9] usb: cdns3: imx: add glue layer runtime pm implementation
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 7/9] usb: host: xhci-plat: add priv flag for skip_phy_initialization
  • From: Peter Chen <peter.chen@xxxxxxx>
• Re: [PATCH v2 3/9] usb: cdns3: imx: add glue layer runtime pm implementation
  • From: Peter Chen <peter.chen@xxxxxxx>
• Re: [PATCH v2 2/9] usb: cdns3: add runtime PM support
  • From: Peter Chen <peter.chen@xxxxxxx>
• [PATCH 4/6] usb: musb: mediatek: add reset FADDR to zero in reset interrupt handle
  • From: Bin Liu <b-liu@xxxxxx>
• [PATCH 2/6] usb: musb: start session in resume for host port
  • From: Bin Liu <b-liu@xxxxxx>
• [PATCH 6/6] usb: musb: Fix runtime PM imbalance on error
  • From: Bin Liu <b-liu@xxxxxx>
• [PATCH 5/6] usb: musb: jz4740: Prevent lockup when CONFIG_SMP is set
  • From: Bin Liu <b-liu@xxxxxx>
• [PATCH 3/6] usb: musb: use true for 'use_dma'
  • From: Bin Liu <b-liu@xxxxxx>
• [PATCH 1/6] usb: musb: return -ESHUTDOWN in urb when three-strikes error happened
  • From: Bin Liu <b-liu@xxxxxx>
• [PATCH 0/6] musb patches for v5.8-rc1
  • From: Bin Liu <b-liu@xxxxxx>
• [Bug 207871] nullpointer dereference in uvc_video_stop_streaming
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• Re: INFO: task hung in locks_remove_posix
  • From: syzbot <syzbot+f5bc30abd8916982419c@xxxxxxxxxxxxxxxxxxxxxxxxx>
• [Bug 207871] nullpointer dereference in uvc_video_stop_streaming
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• Re: WARNING in dlfb_submit_urb/usb_submit_urb
  • From: syzbot <syzbot+53ce4a4246d0fe0fee34@xxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 8/8] ARM: dts: r8a7742: Add xhci support
  • From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
• [PATCH 7/8] ARM: dts: r8a7742: Add USB-DMAC and HSUSB device nodes
  • From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
• [PATCH 6/8] ARM: dts: r8a7742: Add USB 2.0 host support
  • From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
• [PATCH 5/8] dt-bindings: usb: usb-xhci: Document r8a7742 support
  • From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
• [PATCH 4/8] dt-bindings: dmaengine: renesas,usb-dmac: Add binding for r8a7742
  • From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
• [PATCH 3/8] dt-bindings: usb: renesas,usbhs: Add support for r8a7742
  • From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
• [PATCH 2/8] dt-bindings: PCI: pci-rcar-gen2: Add device tree support for r8a7742
  • From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
• [PATCH 1/8] dt-bindings: phy: rcar-gen2: Add r8a7742 support
  • From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
• [PATCH 0/8] R8A7742 add support for HSUSB and USB2.0/3.0
  • From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
• [Bug 207871] nullpointer dereference in uvc_video_stop_streaming
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• Re: Ext. HDDs not working under Linux via USB 3.0 but under Windows
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [usb:usb-testing] BUILD SUCCESS 14f3a5ccacdb4268764474d834ee353219dbd1a2
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [Bug 207871] nullpointer dereference in uvc_video_stop_streaming
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• Re: Ext. HDDs not working under Linux via USB 3.0 but under Windows
  • From: Till Dörges <doerges@xxxxxxxxxxxx>
• RE: [PATCH v2 7/9] usb: host: xhci-plat: add priv flag for skip_phy_initialization
  • From: Jun Li <jun.li@xxxxxxx>
• RE: [PATCH v2 6/9] usb: host: xhci-plat: delete the unnecessary code
  • From: Jun Li <jun.li@xxxxxxx>
• RE: [PATCH v2 3/9] usb: cdns3: imx: add glue layer runtime pm implementation
  • From: Jun Li <jun.li@xxxxxxx>
• RE: [PATCH v2 2/9] usb: cdns3: add runtime PM support
  • From: Jun Li <jun.li@xxxxxxx>
• RE: [PATCH v2 2/9] usb: cdns3: add runtime PM support
  • From: Jun Li <jun.li@xxxxxxx>
• RE: [PATCH v2 1/9] usb: cdns3: introduce cdns3_set_phy_power API
  • From: Jun Li <jun.li@xxxxxxx>
• [PATCH v2 9/9] usb: cdns3: host: add xhci_plat_priv's flag skip_phy_initialization
  • From: Peter Chen <peter.chen@xxxxxxx>
• [PATCH v2 8/9] usb: cdns3: host: add .suspend_quirk for xhci-plat.c
  • From: Peter Chen <peter.chen@xxxxxxx>
• [PATCH v2 7/9] usb: host: xhci-plat: add priv flag for skip_phy_initialization
  • From: Peter Chen <peter.chen@xxxxxxx>
• [PATCH v2 6/9] usb: host: xhci-plat: delete the unnecessary code
  • From: Peter Chen <peter.chen@xxxxxxx>
• [PATCH v2 5/9] usb: host: xhci-plat: add .suspend_quirk for struct xhci_plat_priv
  • From: Peter Chen <peter.chen@xxxxxxx>
• [PATCH v2 4/9] usb: host: xhci-plat: add platform data support
  • From: Peter Chen <peter.chen@xxxxxxx>
• [PATCH v2 3/9] usb: cdns3: imx: add glue layer runtime pm implementation
  • From: Peter Chen <peter.chen@xxxxxxx>
• [PATCH v2 2/9] usb: cdns3: add runtime PM support
  • From: Peter Chen <peter.chen@xxxxxxx>
• [PATCH v2 1/9] usb: cdns3: introduce cdns3_set_phy_power API
  • From: Peter Chen <peter.chen@xxxxxxx>
• [PATCH v2 0/9] usb: some PM changes for cdns3 and xhci-plat
  • From: Peter Chen <peter.chen@xxxxxxx>
• Re: Ext. HDDs not working under Linux via USB 3.0 but under Windows
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Ext. HDDs not working under Linux via USB 3.0 but under Windows
  • From: Till Dörges <doerges@xxxxxxxxxxxx>
• [Bug 207871] New: nullpointer dereference in uvc_video_stop_streaming
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• Re: Ext. HDDs not working under Linux via USB 3.0 but under Windows
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Ext. HDDs not working under Linux via USB 3.0 but under Windows
  • From: Till Dörges <doerges@xxxxxxxxxxxx>
• Re: [PATCH] USB: sisusbvga: Fix left shifting a possible negative value
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] usb: gadget: fix potential double-free in m66592_probe.
  • From: wu000273@xxxxxxx
• [RFC PATCH 1/1] usb: dwc3: of-simple: Add extcon support
  • From: Prashant Malani <pmalani@xxxxxxxxxxxx>
• [RFC PATCH 0/1] usb: dwc3: Extcon hotplug support to of-simple
  • From: Prashant Malani <pmalani@xxxxxxxxxxxx>
• [Bug 207859] unhandled paging request
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• Re: KASAN: slab-out-of-bounds Read in ath9k_hif_usb_rx_cb
  • From: syzbot <syzbot+c15a0a825788b6ba2bc4@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: KASAN: slab-out-of-bounds Read in dlfb_usb_probe
  • From: syzbot <syzbot+ed94135f896a14d75284@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: gadget: fsl: Fix a wrong judgment in fsl_udc_probe()
  • From: Li Yang <leoyang.li@xxxxxxx>
• RE: [PATCH] USB: sisusbvga: Fix left shifting a possible negative value
  • From: Changming Liu <liu.changm@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/3] Re-introduce TX FIFO resize for larger EP bursting
  • From: Wesley Cheng <wcheng@xxxxxxxxxxxxxx>
• Re: [RFC PATCH v2 4/4] usb: xhci: Use temporary buffer to consolidate SG
  • From: Tejas Joglekar <Tejas.Joglekar@xxxxxxxxxxxx>
• Re: [PATCH] [v3] usb: musb: Fix runtime PM imbalance on error
  • From: Bin Liu <b-liu@xxxxxx>
• [usb:usb-next] BUILD SUCCESS e9ccc35b86653cb15e9bffbe2cbef8781ea2c1dd
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [PATCH AUTOSEL 5.6 24/41] usb: gadget: legacy: fix redundant initialization warnings
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 18/32] usb: dwc3: pci: Enable extcon driver for Intel Merrifield
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 19/32] usb: phy: twl6030-usb: Fix a resource leak in an error handling path in 'twl6030_usb_probe()'
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 20/32] usb: gadget: legacy: fix redundant initialization warnings
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 13/19] usb: dwc3: pci: Enable extcon driver for Intel Merrifield
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 14/19] usb: gadget: legacy: fix redundant initialization warnings
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 7/8] usb: gadget: legacy: fix redundant initialization warnings
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 4/5] usb: gadget: legacy: fix redundant initialization warnings
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 10/13] usb: gadget: legacy: fix redundant initialization warnings
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.6 23/41] usb: phy: twl6030-usb: Fix a resource leak in an error handling path in 'twl6030_usb_probe()'
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.6 22/41] usb: dwc3: pci: Enable extcon driver for Intel Merrifield
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [RFC PATCH v2 4/4] usb: xhci: Use temporary buffer to consolidate SG
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 8/8] usb: cdns3: host: add xhci_plat_priv's flag skip_phy_initialization
  • From: Peter Chen <peter.chen@xxxxxxx>
• [PATCH 7/8] usb: cdns3: host: add .suspend_quirk for xhci-plat.c
  • From: Peter Chen <peter.chen@xxxxxxx>
• [PATCH 6/8] usb: host: xhci-plat: add priv flag for skip_phy_initialization
  • From: Peter Chen <peter.chen@xxxxxxx>
• [PATCH 5/8] usb: host: xhci-plat: delete the unnecessary code
  • From: Peter Chen <peter.chen@xxxxxxx>
• [PATCH 4/8] usb: host: xhci-plat: add .suspend_quirk for struct xhci_plat_priv
  • From: Peter Chen <peter.chen@xxxxxxx>
• [PATCH 2/8] usb: cdns3: imx: add glue layer runtime pm implementation
  • From: Peter Chen <peter.chen@xxxxxxx>
• [PATCH 3/8] usb: host: xhci-plat: add platform data support
  • From: Peter Chen <peter.chen@xxxxxxx>
• [PATCH 1/8] usb: cdns3: add runtime PM support
  • From: Peter Chen <peter.chen@xxxxxxx>
• [PATCH 0/8] usb: cdns3: add runtime PM support
  • From: Peter Chen <peter.chen@xxxxxxx>
• Re: [PATCH v2 0/3] Re-introduce TX FIFO resize for larger EP bursting
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• Re: [PATCH] usb: bdc: Fix return value of bdc_probe()
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: cdc-wdm: Call wake_up_all() when clearing WDM_IN_USE bit.
  • From: Tetsuo Handa <penguin-kernel@xxxxxxxxxxxxxxxxxxx>
• [PATCH] usb: bdc: Fix return value of bdc_probe()
  • From: Tiezhu Yang <yangtiezhu@xxxxxxxxxxx>
• Re: [PATCH] USB: cdc-wdm: Call wake_up_all() when clearing WDM_IN_USE bit.
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• Re: [PATCH] USB: sisusbvga: Fix left shifting a possible negative value
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1] usb: musb: dsps: set MUSB_DA8XX quirk for AM335x
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH] [v3] usb: musb: Fix runtime PM imbalance on error
  • From: Dinghao Liu <dinghao.liu@xxxxxxxxxx>
• Re: Re: [PATCH] [v2] usb: musb: Fix runtime PM imbalance on error
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: Re: [PATCH] [v2] usb: musb: Fix runtime PM imbalance on error
  • From: dinghao.liu@xxxxxxxxxx
• Re: [PATCH] [v2] usb: musb: Fix runtime PM imbalance on error
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] [v2] usb: musb: Fix runtime PM imbalance on error
  • From: Dinghao Liu <dinghao.liu@xxxxxxxxxx>
• Re: [RFC PATCH v2 4/4] usb: xhci: Use temporary buffer to consolidate SG
  • From: Tejas Joglekar <Tejas.Joglekar@xxxxxxxxxxxx>
• Re: Re: [PATCH] usb: musb: Fix runtime PM imbalance on error
  • From: dinghao.liu@xxxxxxxxxx
• Re: [PATCH v3 0/7] add support USB for MT8183
  • From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
• Re: [PATCH] usb: cdns3: Fix runtime PM imbalance on error
  • From: Peter Chen <hzpeterchen@xxxxxxxxx>
• Re: [PATCH] USB: cdc-wdm: Call wake_up_all() when clearing WDM_IN_USE bit.
  • From: Tetsuo Handa <penguin-kernel@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: musb: jz4740: Prevent lockup when CONFIG_SMP is set
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCH] usb: musb: jz4740: Prevent lockup when CONFIG_SMP is set
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCH] usb: musb: jz4740: Prevent lockup when CONFIG_SMP is set
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCH] usb: musb: jz4740: Prevent lockup when CONFIG_SMP is set
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH] usb: musb: Fix runtime PM imbalance on error
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCH] usb: musb: jz4740: Prevent lockup when CONFIG_SMP is set
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCH] USB: cdc-wdm: Call wake_up_all() when clearing WDM_IN_USE bit.
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• Re: WARNING in media_create_pad_link
  • From: syzbot <syzbot+dd320d114deb3f5bb79b@xxxxxxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH] USB: sisusbvga: Fix left shifting a possible negative value
  • From: Changming Liu <liu.changm@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/3] Re-introduce TX FIFO resize for larger EP bursting
  • From: Wesley Cheng <wcheng@xxxxxxxxxxxxxx>
• [PATCH v7 0/2] Add USB DWC3 support for SC7180
  • From: Sandeep Maheswaram <sanm@xxxxxxxxxxxxxx>
• [PATCH v7 1/2] dt-bindings: usb: qcom,dwc3: Convert USB DWC3 bindings
  • From: Sandeep Maheswaram <sanm@xxxxxxxxxxxxxx>
• [PATCH v7 2/2] dt-bindings: usb: qcom,dwc3: Add compatible for SC7180
  • From: Sandeep Maheswaram <sanm@xxxxxxxxxxxxxx>
• Re: [PATCH v10 1/5] usb: xhci: Change the XHCI link order in the Makefile
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• [PATCH] usb: gadget: lpc32xx_udc: don't dereference ep pointer before null check
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• Re: [PATCH v3 5/7] arm64: dts: mt8183: add usb and phy nodes
  • From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
• Re: INFO: task hung in locks_remove_posix
  • From: Tetsuo Handa <penguin-kernel@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 0/7] add support USB for MT8183
  • From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
• [PATCH] [v2] xhci: Fix runtime PM imbalance on error
  • From: Dinghao Liu <dinghao.liu@xxxxxxxxxx>
• Re: [PATCH] xhci: Fix runtime PM imbalance on error
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH] USB: cdc-wdm: Call wake_up_all() when clearing WDM_IN_USE bit.
  • From: Tetsuo Handa <penguin-kernel@xxxxxxxxxxxxxxxxxxx>
• [PATCH] usb: dwc3: Increase timeout for CmdAct cleared by device controller
  • From: Li Jun <jun.li@xxxxxxx>
• [PATCH v2 3/3] dt-bindings: usb: dwc3: Add entry for tx-fifo-resize
  • From: Wesley Cheng <wcheng@xxxxxxxxxxxxxx>
• [PATCH v2 1/3] usb: dwc3: Resize TX FIFOs to meet EP bursting requirements
  • From: Wesley Cheng <wcheng@xxxxxxxxxxxxxx>
• [PATCH v2 0/3] Re-introduce TX FIFO resize for larger EP bursting
  • From: Wesley Cheng <wcheng@xxxxxxxxxxxxxx>
• [PATCH v2 2/3] arm64: boot: dts: qcom: sm8150: Enable dynamic TX FIFO resize logic
  • From: Wesley Cheng <wcheng@xxxxxxxxxxxxxx>
• RE: [PATCH v4 3/9] usb: dwc3: Increase timeout for CmdAct cleared by device controller
  • From: Jun Li <jun.li@xxxxxxx>
• [PATCH] usb: cdns3: Fix runtime PM imbalance on error
  • From: Dinghao Liu <dinghao.liu@xxxxxxxxxx>
• Re: [PATCH] USB: sisusbvga: Fix left shifting a possible negative value
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] usb: musb: Fix runtime PM imbalance on error
  • From: Dinghao Liu <dinghao.liu@xxxxxxxxxx>
• RE: [PATCH v4 3/9] usb: dwc3: Increase timeout for CmdAct cleared by device controller
  • From: Jun Li <jun.li@xxxxxxx>
• Re: [PATCH] USB: cdc-wdm: Call wake_up_all() when clearing WDM_IN_USE bit.
  • From: Greg KH <greg@xxxxxxxxx>
• [PATCH] xhci: Fix runtime PM imbalance on error
  • From: Dinghao Liu <dinghao.liu@xxxxxxxxxx>
• Re: [PATCH v4 3/9] usb: dwc3: Increase timeout for CmdAct cleared by device controller
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• Re: [PATCH v4 3/9] usb: dwc3: Increase timeout for CmdAct cleared by device controller
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• Re: [PATCH v10 1/5] usb: xhci: Change the XHCI link order in the Makefile
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2] usb: dwc2: Update Core Reset programming flow.
  • From: Minas Harutyunyan <Minas.Harutyunyan@xxxxxxxxxxxx>
• [balbi-usb:next 69/89] drivers/usb/dwc3/core.c:292:2: note: in expansion of macro 'if'
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: XHCI vs PCM2903B/PCM2904 part 2
  • From: Rik van Riel <riel@xxxxxxxxxxx>
• Re: [PATCH v4 3/9] usb: dwc3: Increase timeout for CmdAct cleared by device controller
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [PATCH v4 3/9] usb: dwc3: Increase timeout for CmdAct cleared by device controller
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [PATCH v2] USB: serial: qcserial: Add DW5816e QDL support
  • From: Matt Jolly <Kangie@footclan.ninja>
• [balbi-usb:next 81/89] drivers/usb/gadget/udc/atmel_usba_udc.c:2106:22: warning: variable 'pp' set but not used
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [PATCH] USB: cdc-wdm: Call wake_up_all() when clearing WDM_IN_USE bit.
  • From: Tetsuo Handa <penguin-kernel@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: dwc2: Update Core Reset programming flow.
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH] USB: serial: qcserial: Add DW5816e QDL support
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH] USB: serial: qcserial: Add DW5816e QDL support
  • From: kbuild test robot <lkp@xxxxxxxxx>
• INFO: task hung in locks_remove_posix
  • From: syzbot <syzbot+f5bc30abd8916982419c@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: XHCI vs PCM2903B/PCM2904 part 2
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: XHCI vs PCM2903B/PCM2904 part 2
  • From: Rik van Riel <riel@xxxxxxxxxxx>
• Re: XHCI vs PCM2903B/PCM2904 part 2
  • From: Rik van Riel <riel@xxxxxxxxxxx>
• Re: [PATCH] usb: musb: return -ESHUTDOWN in urb when three-strikes error happened
  • From: Bin Liu <b-liu@xxxxxx>
• [PATCH 1/1] thunderbolt: add trivial .shutdown
  • From: Maxim Levitsky <mlevitsk@xxxxxxxxxx>
• [PATCH 0/1] RFC: Make thunderbolt NHI driver work with kexec [RESEND]
  • From: Maxim Levitsky <mlevitsk@xxxxxxxxxx>
• Re: [PATCH 1/1] thunderbolt: add trivial .shutdown
  • From: Maxim Levitsky <mlevitsk@xxxxxxxxxx>
• Re: [PATCH] usb: musb: return -ESHUTDOWN in urb when three-strikes error happened
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: typec: Ensure USB_ROLE_SWITCH is a dependency for tps6598x
  • From: kbuild test robot <lkp@xxxxxxxxx>
• RE: [PATCH] USB: sisusbvga: Fix left shifting a possible negative value
  • From: Changming Liu <liu.changm@xxxxxxxxxxxxxxxx>
• [PATCH 1/1] thunderbolt: add trivial .shutdown
  • From: Maxim Levitsky <mlevitsk@xxxxxxxxxx>
• [PATCH 0/1] RFC: Make thunderbolt NHI driver work with kexec
  • From: Maxim Levitsky <mlevitsk@xxxxxxxxxx>
• [PATCH] USB: sisusbvga: Fix left shifting a possible negative value
  • From: Changming Liu <liu.changm@xxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: musb: return -ESHUTDOWN in urb when three-strikes error happened
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [RFC PATCH v2 4/4] usb: xhci: Use temporary buffer to consolidate SG
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v10 1/5] usb: xhci: Change the XHCI link order in the Makefile
  • From: Alan Cooper <alcooperx@xxxxxxxxx>
• Re: [RFC PATCH v2 4/4] usb: xhci: Use temporary buffer to consolidate SG
  • From: Tejas Joglekar <Tejas.Joglekar@xxxxxxxxxxxx>
• [balbi-usb:next 69/89] drivers/usb/dwc3/gadget.c:1885:7: note: in expansion of macro 'DWC3_VER_IS_WITHIN'
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [RFC PATCH v2 4/4] usb: xhci: Use temporary buffer to consolidate SG
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: sisusbvga: Fix left shifting a possible negative value
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] usb: musb: return -ESHUTDOWN in urb when three-strikes error happened
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: XHCI vs PCM2903B/PCM2904 part 2
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] USB: sisusbvga: Fix left shifting a possible negative value
  • From: Changming Liu <liu.changm@xxxxxxxxxxxxxxxx>
• Unable to open(2) ep0 in ConfigFG FunctionFS Gadget
  • From: "Sid Spry" <sid@xxxxxxx>
• Re: [PATCH v3] usb: typec: Ensure USB_ROLE_SWITCH is set as a dependency for tps6598x
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH v3] usb: typec: Ensure USB_ROLE_SWITCH is set as a dependency for tps6598x
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v2 1/2] usb: typec: Ensure USB_ROLE_SWITCH is selected for tps6598x
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH] usb: musb: jz4740: Prevent lockup when CONFIG_SMP is set
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH v1] usb: musb: dsps: set MUSB_DA8XX quirk for AM335x
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCH] usb: musb: return -ESHUTDOWN in urb when three-strikes error happened
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCH v2 1/8] drivers: most: add usb adapter driver
  • From: <Christian.Gromm@xxxxxxxxxxxxx>
• Re: XHCI vs PCM2903B/PCM2904 part 2
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] usb: typec: Ensure USB_ROLE_SWITCH is selected for tps6598x
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] usb: typec: Ensure USB_ROLE_SWITCH is selected for tps6598x
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH] usb: dwc2: Update Core Reset programming flow.
  • From: Minas Harutyunyan <Minas.Harutyunyan@xxxxxxxxxxxx>
• Re: ttyACM strange chars appearing at connect
  • From: Joakim Tjernlund <Joakim.Tjernlund@xxxxxxxxxxxx>
• Re: [PATCH v13 2/5] usb: renesas-xhci: Add the renesas xhci driver
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] usb: typec: Ensure USB_ROLE_SWITCH is selected for tps6598x
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v2 1/8] drivers: most: add usb adapter driver
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v2 1/2] usb: typec: Ensure USB_ROLE_SWITCH is selected for tps6598x
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] usb: typec: Ensure USB_ROLE_SWITCH is selected for hd3ss3220
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH] usb: typec: Ensure USB_ROLE_SWITCH is a dependency for tps6598x
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: ttyACM strange chars appearing at connect
  • From: Dan Williams <dcbw@xxxxxxxxxx>
• Re: ttyACM strange chars appearing at connect
  • From: Joakim Tjernlund <Joakim.Tjernlund@xxxxxxxxxxxx>
• [PATCH v2 2/2] usb: typec: Ensure USB_ROLE_SWITCH is selected for hd3ss3220
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v2 0/2] Fix role-switch selection in type-c drivers
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v2 1/2] usb: typec: Ensure USB_ROLE_SWITCH is selected for tps6598x
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH] usb: typec: Ensure USB_ROLE_SWITCH is a dependency for tps6598x
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: XHCI vs PCM2903B/PCM2904 part 2
  • From: Takashi Iwai <tiwai@xxxxxxx>
• [PATCH] USB: serial: qcserial: Add DW5816e QDL support
  • From: Matt Jolly <Kangie@footclan.ninja>
• XHCI vs PCM2903B/PCM2904 part 2
  • From: Rik van Riel <riel@xxxxxxxxxxx>
• Re: [PATCH] usb: typec: Ensure USB_ROLE_SWITCH is a dependency for tps6598x
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH] usb: typec: Ensure USB_ROLE_SWITCH is a dependency for tps6598x
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH] usb: typec: Ensure USB_ROLE_SWITCH is a dependency for tps6598x
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH] usb: typec: Ensure USB_ROLE_SWITCH is a dependency for tps6598x
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH 2/2] xhci: Poll for U0 after disabling USB2 LPM
  • From: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
• [PATCH 1/2] xhci: Return if xHCI doesn't support LPM
  • From: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
• [PATCH] usb: typec: Ensure USB_ROLE_SWITCH is a dependency for tps6598x
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: question on tty_operations->flush_char()
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [RFC PATCH v2 4/4] usb: xhci: Use temporary buffer to consolidate SG
  • From: Tejas Joglekar <Tejas.Joglekar@xxxxxxxxxxxx>
• Re: question on tty_operations->flush_char()
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: Documentation for Raw USB ConfigFS
  • From: "Sid Spry" <sid@xxxxxxx>
• Re: [Bug Report] drivers/usb/misc/sisusbvga: undefined result when left shift a possible negative value in sisusb_write_mem_bulk
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH v1] usb: musb: dsps: set MUSB_DA8XX quirk for AM335x
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [Bug Report] drivers/usb/misc/sisusbvga: undefined result when left shift a possible negative value in sisusb_write_mem_bulk
  • From: Changming Liu <liu.changm@xxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: musb: mediatek: add reset FADDR to zero in reset interrupt handle
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCH] usb: musb: use true for 'use_dma'
  • From: Bin Liu <b-liu@xxxxxx>
• [usb:usb-testing] BUILD SUCCESS d49292025f79693d3348f8e2029a8b4703be0f0a
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v1] usb: musb: dsps: set MUSB_DA8XX quirk for AM335x
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCH v13 2/5] usb: renesas-xhci: Add the renesas xhci driver
  • From: Christian Lamparter <chunkeey@xxxxxxxxx>
• Re: [PATCH] usb: musb: return -ESHUTDOWN in urb when three-strikes error happened
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Documentation for Raw USB ConfigFS
  • From: Krzysztof Opasiak <k.opasiak@xxxxxxxxxxx>
• Re: Documentation for Raw USB ConfigFS
  • From: "Sid Spry" <sid@xxxxxxx>
• Re: Documentation for Raw USB ConfigFS
  • From: "Sid Spry" <sid@xxxxxxx>
• [PATCH v2] usb: musb: return -ESHUTDOWN in urb when three-strikes error happened
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCH] usb: musb: return -ESHUTDOWN in urb when three-strikes error happened
  • From: Bin Liu <b-liu@xxxxxx>
• question on tty_operations->flush_char()
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• [usb:usb-testing] BUILD SUCCESS df00731cffa0edb454ee0c490696ce0c1745e680
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 5/8] drivers: most: usb: use dev_dbg function
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v2 2/8] drivers: most: usb: use dev_*() functions to print messages
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: ttyACM strange chars appearing at connect
  • From: Joakim Tjernlund <Joakim.Tjernlund@xxxxxxxxxxxx>
• Re: [PATCH v3 2/2] usb: serial: xr_serial: Add gpiochip support
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: ttyACM strange chars appearing at connect
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v13 2/5] usb: renesas-xhci: Add the renesas xhci driver
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH v13 3/5] usb: xhci: Add support for Renesas controller with memory
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v3 1/2] usb: serial: Add MaxLinear/Exar USB to Serial driver
  • From: Johan Hovold <johan@xxxxxxxxxx>
• ttyACM strange chars appearing at connect
  • From: Joakim Tjernlund <Joakim.Tjernlund@xxxxxxxxxxxx>
• Re: [PATCH v13 2/5] usb: renesas-xhci: Add the renesas xhci driver
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v13 2/5] usb: renesas-xhci: Add the renesas xhci driver
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH] usb: xhci: make symbols static
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [usb:usb-testing 57/64] drivers/usb/host/xhci-pci.h:13:5: warning: no previous prototype for 'renesas_xhci_check_request_fw'
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [no subject]
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH 2/2] usb: serial: xr_serial: Add gpiochip support
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH 2/2] usb: serial: xr_serial: Add gpiochip support
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] usb: usb_wwan: do not resubmit rx urb on fatal errors in rx callback
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v13 3/5] usb: xhci: Add support for Renesas controller with memory
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• RE: [PATCH v4 3/9] usb: dwc3: Increase timeout for CmdAct cleared by device controller
  • From: Jun Li <jun.li@xxxxxxx>
• Re: [PATCH v4 3/9] usb: dwc3: Increase timeout for CmdAct cleared by device controller
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [PATCH v4 3/9] usb: dwc3: Increase timeout for CmdAct cleared by device controller
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [PATCH] usb: xhci: fix USB_XHCI_PCI depends
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH] usb: xhci: fix USB_XHCI_PCI depends
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v13 3/5] usb: xhci: Add support for Renesas controller with memory
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• RE: [PATCH 1/1] usb: cdns3: ep0: delete the redundant status stage
  • From: Pawel Laszczak <pawell@xxxxxxxxxxx>
• Re: [PATCH v7 2/4] usb: dwc3: qcom: Add interconnect support in dwc3 driver
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• RE: [PATCH v4 3/9] usb: dwc3: Increase timeout for CmdAct cleared by device controller
  • From: Jun Li <jun.li@xxxxxxx>
• [usb:usb-testing] BUILD SUCCESS 16bdc04cc98ab0c74392ceef2475ecc5e73fcf49
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2] usb: gadget: Fix issue with config_ep_by_speed function.
  • From: Peter Chen <peter.chen@xxxxxxx>
• RE: Documentation for Raw USB ConfigFS
  • From: Peter Chen <peter.chen@xxxxxxx>
• KASAN: use-after-free Read in em28xx_release_resources
  • From: syzbot <syzbot+83803be25e647b7e40b0@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v13 3/5] usb: xhci: Add support for Renesas controller with memory
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v13 3/5] usb: xhci: Add support for Renesas controller with memory
  • From: Anders Roxell <anders.roxell@xxxxxxxxxx>
• Re: usbmisc_imx: charger detection errors
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: Documentation for Raw USB ConfigFS
  • From: "Sid Spry" <sid@xxxxxxx>
• Re: [PATCH v13 3/5] usb: xhci: Add support for Renesas controller with memory
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v7 2/4] usb: dwc3: qcom: Add interconnect support in dwc3 driver
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH 4.14 097/114] usb: core: hub: limit HUB_QUIRK_DISABLE_AUTOSUSPEND to USB5534B
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 4.19 56/80] usb: core: hub: limit HUB_QUIRK_DISABLE_AUTOSUSPEND to USB5534B
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v13 3/5] usb: xhci: Add support for Renesas controller with memory
  • From: Anders Roxell <anders.roxell@xxxxxxxxxx>
• [PATCH 4.19 67/80] dwc3: Remove check for HWO flag in dwc3_gadget_ep_reclaim_trb_sg()
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 5.4 125/147] dwc3: Remove check for HWO flag in dwc3_gadget_ep_reclaim_trb_sg()
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 5.6 142/194] usb: core: hub: limit HUB_QUIRK_DISABLE_AUTOSUSPEND to USB5534B
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 5.6 162/194] dwc3: Remove check for HWO flag in dwc3_gadget_ep_reclaim_trb_sg()
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 5.4 109/147] usb: core: hub: limit HUB_QUIRK_DISABLE_AUTOSUSPEND to USB5534B
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH v2 4/4] usb: xhci: Use temporary buffer to consolidate SG
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [RESEND] [PATCH v2 3/3] usb/ehci-platform: Set PM runtime as active on resume
  • From: Qais Yousef <qais.yousef@xxxxxxx>
• [RESEND] [PATCH v2 2/3] usb/xhci-plat: Set PM runtime as active on resume
  • From: Qais Yousef <qais.yousef@xxxxxxx>
• [RESEND] [PATCH v2 1/3] usb/ohci-platform: Fix a warning when hibernating
  • From: Qais Yousef <qais.yousef@xxxxxxx>
• Re: [PATCH 1/3] usb/ohci-platform: Fix a warning when hibernating
  • From: Qais Yousef <qais.yousef@xxxxxxx>
• Re: [PATCH 1/3] usb/ohci-platform: Fix a warning when hibernating
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 28/28] dt-bindings: usb: Convert ehci-mv to json-schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/3] usb/ohci-platform: Fix a warning when hibernating
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 25/28] dt-bindings: rtc: Convert sa1100-rtc to json-schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• [usb:usb-testing] BUILD REGRESSION 48a789079a146ecd916e29cc5e47410d9cb05fbe
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [kbuild-all] Re: [balbi-usb:testing/fixes 2/8] WARNING: simple_strtoul is obsolete, use kstrtoul instead
  • From: Philip Li <philip.li@xxxxxxxxx>
• Re: [PATCH 1/3] usb/ohci-platform: Fix a warning when hibernating
  • From: Qais Yousef <qais.yousef@xxxxxxx>
• Re: [PATCH v6 1/2] dt-bindings: usb: qcom,dwc3: Convert USB DWC3 bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [balbi-usb:testing/fixes 2/8] WARNING: simple_strtoul is obsolete, use kstrtoul instead
  • From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
• Re: your mail
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH v3] drivers: most: add USB adapter driver
  • From: Christian Gromm <christian.gromm@xxxxxxxxxxxxx>
• Re: [PATCH V3 5/8] phy: tegra: xusb: Add soc ops API to enable UTMI PAD protection
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• RE: usbmisc_imx: charger detection errors
  • From: Jun Li <jun.li@xxxxxxx>
• RE: [PATCH 1/1] usb: cdns3: ep0: delete the redundant status stage
  • From: Peter Chen <peter.chen@xxxxxxx>
• [PATCH v2] usb: gadget: Fix issue with config_ep_by_speed function.
  • From: Pawel Laszczak <pawell@xxxxxxxxxxx>
• Re: [RFC PATCH v2 4/4] usb: xhci: Use temporary buffer to consolidate SG
  • From: Tejas Joglekar <Tejas.Joglekar@xxxxxxxxxxxx>
• RE: [PATCH 1/1] usb: cdns3: ep0: delete the redundant status stage
  • From: Pawel Laszczak <pawell@xxxxxxxxxxx>
• Re: [PATCH 1/1] usb: cdns3: ep0: delete the redundant status stage
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• Re: [PATCH] usblp: poison URBs upon disconnect
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• Re: [PATCH 1/1] usb: cdns3: ep0: delete the redundant status stage
  • From: Peter Chen <peter.chen@xxxxxxx>
• Re: [PATCH v3 1/2] usb: serial: Add MaxLinear/Exar USB to Serial driver
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: Documentation for Raw USB ConfigFS
  • From: Peter Chen <peter.chen@xxxxxxx>
• RE: [PATCH 1/1] usb: cdns3: ep0: delete the redundant status stage
  • From: Pawel Laszczak <pawell@xxxxxxxxxxx>
• Re: [PATCH 1/1] usb: cdns3: ep0: delete the redundant status stage
  • From: Peter Chen <peter.chen@xxxxxxx>
• [balbi-usb:testing/fixes 2/8] WARNING: simple_strtoul is obsolete, use kstrtoul instead
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [GIT PULL] USB driver fixes for 5.7-rc6
  • From: pr-tracker-bot@xxxxxxxxxx
• Re: [PATCH 28/28] dt-bindings: usb: Convert ehci-mv to json-schema
  • From: Lubomir Rintel <lkundrak@xxxxx>
• Re: [PATCH 26/28] dt-bindings: spi: Convert spi-pxa2xx to json-schema
  • From: Lubomir Rintel <lkundrak@xxxxx>
• Re: [PATCH 25/28] dt-bindings: rtc: Convert sa1100-rtc to json-schema
  • From: Lubomir Rintel <lkundrak@xxxxx>
• Re: [PATCH 24/28] dt-bindings: media: Convert marvell,mmp2-ccic to json-schema
  • From: Lubomir Rintel <lkundrak@xxxxx>
• Re: [PATCH 23/28] dt-bindings: interrupt-controller: Convert mrvl,intc to json-schema
  • From: Lubomir Rintel <lkundrak@xxxxx>
• Re: [PATCH 21/28] dt-bindings: gpio: Convert mrvl-gpio to json-schema
  • From: Lubomir Rintel <lkundrak@xxxxx>
• Re: [PATCH 19/28] dt-bindings: mmc: Convert sdhci-pxa to json-schema
  • From: Lubomir Rintel <lkundrak@xxxxx>
• Locating commit which fixed xhci-hcd: Ring expansion failed
  • From: "Michael Hoogasian" <michael.hoogasian@xxxxxxxxxxx>
• KASAN: slab-out-of-bounds Read in ath9k_hif_usb_rx_cb
  • From: syzbot <syzbot+c15a0a825788b6ba2bc4@xxxxxxxxxxxxxxxxxxxxxxxxx>
• [GIT PULL] USB driver fixes for 5.7-rc6
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: KASAN: use-after-free Read in f_hidg_poll
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v9 2/6] arm: dts: mt2701: Add usb2 device nodes
  • From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
• [PATCH] usb: renesas-xhci: include correct header for get_unaligned_le16()
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [usb:usb-next 56/58] include/linux/unaligned/access_ok.h:8:28: error: redefinition of 'get_unaligned_le16'
  • From: Vinod Koul <vinod.koul@xxxxxxxxxx>
• [usb:usb-next 56/58] include/linux/unaligned/access_ok.h:13:28: error: redefinition of 'get_unaligned_le32'
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [balbi-usb:testing/next 86/89] FATAL ERROR: Unable to parse input tree
  • From: kbuild test robot <lkp@xxxxxxxxx>
• RE: [PATCH v4 3/9] usb: dwc3: Increase timeout for CmdAct cleared by device controller
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• Re: usbmisc_imx: charger detection errors
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: [usb:usb-next 56/58] include/linux/unaligned/access_ok.h:8:28: error: redefinition of 'get_unaligned_le16'
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [balbi-usb:testing/next 86/89] Error: arch/arm64/boot/dts/qcom/sc7180.dtsi:1450.33-34 syntax error
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [usb:usb-next 56/58] include/linux/unaligned/access_ok.h:8:28: error: redefinition of 'get_unaligned_le16'
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH][next] USB: EHCI: ehci-mv: fix less than zero comparison of an unsigned int
  • From: Colin Ian King <colin.king@xxxxxxxxxxxxx>
• RE: [PATCH v4 3/9] usb: dwc3: Increase timeout for CmdAct cleared by device controller
  • From: Jun Li <jun.li@xxxxxxx>
• Re: [PATCH v4 3/9] usb: dwc3: Increase timeout for CmdAct cleared by device controller
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• Re: [PATCH v3 0/2] Add support for MaxLinear/Exar USB to serial converters
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• RE: usbmisc_imx: charger detection errors
  • From: Jun Li <jun.li@xxxxxxx>
• Re: [PATCH][next] USB: EHCI: ehci-mv: fix less than zero comparison of an unsigned int
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: Documentation for Raw USB ConfigFS
  • From: "Sid Spry" <sid@xxxxxxx>
• Re: [PATCH] usb: dwc3: gadget: Check for prepared TRBs
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH] usb: dwc3: gadget: Check for prepared TRBs
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [PATCH][next] USB: EHCI: ehci-mv: fix less than zero comparisonof an unsigned int
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 3/9] usb: dwc3: Increase timeout for CmdAct cleared by device controller
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [PATCH] usb: dwc3: gadget: Check for prepared TRBs
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [PATCH][next] USB: EHCI: ehci-mv: fix less than zero comparisonof an unsigned int
  • From: Tang Bin <tangbin@xxxxxxxxxxxxxxxxxxxx>
• [usb:usb-linus] BUILD SUCCESS 15753588bcd4bbffae1cca33c8ced5722477fe1f
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [usb:usb-testing] BUILD SUCCESS 2478be82de44bee4346eb1f48d4cfa28cd99d2d0
  • From: kbuild test robot <lkp@xxxxxxxxx>
• usbmisc_imx: charger detection errors
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: [PATCH] usblp: poison URBs upon disconnect
  • From: Pete Zaitcev <zaitcev@xxxxxxxxxx>
• Re: [PATCH][next] USB: EHCI: ehci-mv: fix less than zero comparison of an unsigned int
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC 3/3] dt-bindings: usb: dwc3: Add entry for tx-fifo-resize
  • From: Wesley Cheng <wcheng@xxxxxxxxxxxxxx>
• [balbi-usb:testing/next] BUILD SUCCESS a65a1ec70639afa5ff7990cf33213dd41f3c7176
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH][next] USB: EHCI: ehci-mv: fix less than zero comparison of an unsigned int
  • From: Colin Ian King <colin.king@xxxxxxxxxxxxx>
• Re: [PATCH][next] USB: EHCI: ehci-mv: fix less than zero comparison of an unsigned int
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH][next] USB: EHCI: ehci-mv: fix less than zero comparison of an unsigned int
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/7] usb: gadget: udc: atmel: use of_find_matching_node_and_match
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• Re: [PATCH v2 0/7] usb: gadget: udc: atmel: add usb device support for SAM9x60 SoC
  • From: <Cristian.Birsan@xxxxxxxxxxxxx>
• Re: [PATCH v2 0/7] usb: gadget: udc: atmel: add usb device support for SAM9x60 SoC
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [GIT PULL] USB fixes for v5.7-rc6
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 0/8] Add MA USB Host driver
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 3/8] usb: mausb_host: HCD initialization
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [External] Re: [PATCH v5 0/8] Add MA USB Host driver
  • From: Vladimir Stankovic <vladimir.stankovic@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 3/8] usb: mausb_host: HCD initialization
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 1/8] usb: Add MA-USB Host kernel module
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 1/8] usb: Add MA-USB Host kernel module
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH v6 4/8] usb: mausb_host: Implement initial hub handlers
  • From: Vladimir Stankovic <vladimir.stankovic@xxxxxxxxxxxxxxx>
• [PATCH v6 2/8] usb: mausb_host: Add link layer implementation
  • From: Vladimir Stankovic <vladimir.stankovic@xxxxxxxxxxxxxxx>
• [PATCH v6 8/8] usb: mausb_host: Process MA-USB data packets
  • From: Vladimir Stankovic <vladimir.stankovic@xxxxxxxxxxxxxxx>
• [PATCH v6 5/8] usb: mausb_host: Introduce PAL processing
  • From: Vladimir Stankovic <vladimir.stankovic@xxxxxxxxxxxxxxx>
• [PATCH v6 1/8] usb: Add MA-USB Host kernel module
  • From: Vladimir Stankovic <vladimir.stankovic@xxxxxxxxxxxxxxx>
• [PATCH v6 7/8] usb: mausb_host: MA-USB PAL events processing
  • From: Vladimir Stankovic <vladimir.stankovic@xxxxxxxxxxxxxxx>
• [PATCH v6 6/8] usb: mausb_host: Add logic for PAL-to-PAL communication
  • From: Vladimir Stankovic <vladimir.stankovic@xxxxxxxxxxxxxxx>
• [PATCH v6 3/8] usb: mausb_host: HCD initialization
  • From: Vladimir Stankovic <vladimir.stankovic@xxxxxxxxxxxxxxx>
• [PATCH v6 0/8] Add MA USB Host driver
  • From: Vladimir Stankovic <vladimir.stankovic@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/4] usb: typec: mux: intel_pmc_mux: Support for static SBU/HSL orientation
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH v2 6/7] usb: gadget: udc: atmel: update endpoint allocation for sam9x60
  • From: <cristian.birsan@xxxxxxxxxxxxx>
• [PATCH v2 7/7] ARM: dts: at91: sam9x60ek: enable usb device
  • From: <cristian.birsan@xxxxxxxxxxxxx>
• [PATCH v2 4/7] usb: gadget: udc: atmel: use 1 bank endpoints for control transfers
  • From: <cristian.birsan@xxxxxxxxxxxxx>
• [PATCH v2 1/7] usb: gadget: udc: atmel: use of_find_matching_node_and_match
  • From: <cristian.birsan@xxxxxxxxxxxxx>
• [PATCH v2 5/7] usb: gadget: udc: atmel: rename errata into caps
  • From: <cristian.birsan@xxxxxxxxxxxxx>
• [PATCH v2 3/7] usb: gadget: udc: atmel: simplify endpoint allocation
  • From: <cristian.birsan@xxxxxxxxxxxxx>
• [PATCH v2 2/7] dt-bindings: usb: atmel: Update DT bindings documentation for sam9x60
  • From: <cristian.birsan@xxxxxxxxxxxxx>
• [PATCH v2 0/7] usb: gadget: udc: atmel: add usb device support for SAM9x60 SoC
  • From: <cristian.birsan@xxxxxxxxxxxxx>
• RE: [PATCH v4 3/9] usb: dwc3: Increase timeout for CmdAct cleared by device controller
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• RE: [PATCH v4 3/9] usb: dwc3: Increase timeout for CmdAct cleared by device controller
  • From: Jun Li <jun.li@xxxxxxx>
• Re: [PATCH 1/1] usb: cdns3: ep0: delete the redundant status stage
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• Re: [PATCH v4 3/9] usb: dwc3: Increase timeout for CmdAct cleared by device controller
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• [PATCH v6 1/2] dt-bindings: usb: qcom,dwc3: Convert USB DWC3 bindings
  • From: Sandeep Maheswaram <sanm@xxxxxxxxxxxxxx>
• [PATCH v6 0/2] Add USB DWC3 support for SC7180
  • From: Sandeep Maheswaram <sanm@xxxxxxxxxxxxxx>
• [PATCH v6 2/2] dt-bindings: usb: qcom,dwc3: Add compatible for SC7180
  • From: Sandeep Maheswaram <sanm@xxxxxxxxxxxxxx>
• Re: [PATCH] usb: dwc3: Remove old comment
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• [GIT PULL] USB fixes for v5.7-rc6
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• Re: [PATCH] xhci: Fix log mistake of xhci_start
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH v3 5/7] staging: most: fix typo in Kconfig
  • From: Christian Gromm <christian.gromm@xxxxxxxxxxxxx>
• [PATCH v3 4/7] staging: most: usb: use dev_dbg function
  • From: Christian Gromm <christian.gromm@xxxxxxxxxxxxx>
• [PATCH v3 7/7] Documentation: ABI: correct sysfs attribute description of MOST driver
  • From: Christian Gromm <christian.gromm@xxxxxxxxxxxxx>
• [PATCH v3 2/7] staging: most: usb: remove reference to USB error codes
  • From: Christian Gromm <christian.gromm@xxxxxxxxxxxxx>
• [PATCH v3 1/7] staging: most: usb: use dev_*() functions to print messages
  • From: Christian Gromm <christian.gromm@xxxxxxxxxxxxx>
• [PATCH v3 0/7] staging: most: usb: fix issues found in code audit
  • From: Christian Gromm <christian.gromm@xxxxxxxxxxxxx>
• [PATCH v3 6/7] staging: most: usb: use macro ATTRIBUTE_GROUPS
  • From: Christian Gromm <christian.gromm@xxxxxxxxxxxxx>
• [PATCH v3 3/7] staging: most: usb: check number of reported endpoints
  • From: Christian Gromm <christian.gromm@xxxxxxxxxxxxx>
• Re: [PATCH 00/13] usb: dwc3: meson: add OTG support for GXL/GXM
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• Re: [PATCH v2 1/1] phy: phy-cadence-salvo: add phy .init API
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH] [RFC] usb: dwc2: Run the core connect in dwc2_hcd_init()
  • From: Minas Harutyunyan <Minas.Harutyunyan@xxxxxxxxxxxx>
• Re: [PATCH] xhci: Fix log mistake of xhci_start
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: [PATCH v7 2/4] usb: dwc3: qcom: Add interconnect support in dwc3 driver
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• Re: [PATCH v7 2/4] usb: dwc3: qcom: Add interconnect support in dwc3 driver
  • From: Georgi Djakov <georgi.djakov@xxxxxxxxxx>
• Re: [PATCH v7 2/4] usb: dwc3: qcom: Add interconnect support in dwc3 driver
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• [PATCH] xhci: Fix log mistake of xhci_start
  • From: jiahao <jiahao243@xxxxxxxxx>
• Re: [PATCH v7 2/4] usb: dwc3: qcom: Add interconnect support in dwc3 driver
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v7 2/4] usb: dwc3: qcom: Add interconnect support in dwc3 driver
  • From: Manu Gautam <mgautam@xxxxxxxxxxxxxx>
• Re: [PATCH v7 2/4] usb: dwc3: qcom: Add interconnect support in dwc3 driver
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v3 20/20] dt-bindings: ehci/ohci: Allow iommus property
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [RFC 3/3] dt-bindings: usb: dwc3: Add entry for tx-fifo-resize
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: usb: Add TI tps6598x device tree binding documentation
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] usb: core: hub: limit HUB_QUIRK_DISABLE_AUTOSUSPEND to USB5534B
  • From: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
• Re: [PATCH v2 3/7] staging: most: usb: check number of reported endpoints
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH 4/5] usb: dwc3: gadget: Handle transfer completion
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• RE: Documentation for Raw USB ConfigFS
  • From: Peter Chen <peter.chen@xxxxxxx>
• [balbi-usb:testing/next] BUILD SUCCESS 55f322974cbe2878bcfaec3804257c68ac90ee6f
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [PATCH] usb: dwc3: Remove old comment
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [PATCH] usb: core: hub: limit HUB_QUIRK_DISABLE_AUTOSUSPEND to USB5534B
  • From: Eugeniu Rosca <erosca@xxxxxxxxxxxxxx>
• Re: [PATCH v2 4/8] drivers: most: usb: check number of reported endpoints
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v7 2/4] usb: dwc3: qcom: Add interconnect support in dwc3 driver
  • From: Georgi Djakov <georgi.djakov@xxxxxxxxxx>
• Re: [PATCH 2/4] usb: typec: mux: intel_pmc_mux: Support for static SBU/HSL orientation
  • From: Prashant Malani <pmalani@xxxxxxxxxxxx>
• WARNING in carl9170_usb_submit_cmd_urb/usb_submit_urb
  • From: syzbot <syzbot+9468df99cb63a4a4c4e1@xxxxxxxxxxxxxxxxxxxxxxxxx>
• WARNING in media_create_pad_link
  • From: syzbot <syzbot+dd320d114deb3f5bb79b@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH net/next] r8152: Use MAC address from device tree if available
  • From: David Miller <davem@xxxxxxxxxxxxx>
• [PATCH AUTOSEL 5.4 34/49] USB: core: Fix misleading driver bug report
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 26/31] USB: core: Fix misleading driver bug report
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 32/39] net: usb: qmi_wwan: add support for DW5816e
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH] usb: musb: return -ESHUTDOWN in urb when three-strikes error happened
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH AUTOSEL 4.9 21/27] net: usb: qmi_wwan: add support for DW5816e
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 24/27] USB: core: Fix misleading driver bug report
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 11/14] USB: core: Fix misleading driver bug report
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 35/39] USB: core: Fix misleading driver bug report
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.6 38/62] USB: core: Fix misleading driver bug report
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [balbi-usb:testing/fixes] BUILD SUCCESS 172b14b48ca10b280482b164506892ea09edb946
  • From: kbuild test robot <lkp@xxxxxxxxx>
• XHCI vs PCM2903B/PCM2904 babble error
  • From: Rik van Riel <riel@xxxxxxxxxxx>
• Re: [PATCH v7 2/4] usb: dwc3: qcom: Add interconnect support in dwc3 driver
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH] usb: musb: return -ESHUTDOWN in urb when three-strikes error happened
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCH 3/7] staging: most: usb: check number of reported endpoints
  • From: <Christian.Gromm@xxxxxxxxxxxxx>
• Re: Documentation for Raw USB ConfigFS
  • From: "Sid Spry" <sid@xxxxxxx>
• Re: [PATCH] usb: musb: return -ESHUTDOWN in urb when three-strikes error happened
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: musb: return -ESHUTDOWN in urb when three-strikes error happened
  • From: Bin Liu <b-liu@xxxxxx>
• [PATCH v2 7/7] Documentation: ABI: correct sysfs attribute description of MOST driver
  • From: Christian Gromm <christian.gromm@xxxxxxxxxxxxx>
• [PATCH v2 6/7] staging: most: usb: use macro ATTRIBUTE_GROUPS
  • From: Christian Gromm <christian.gromm@xxxxxxxxxxxxx>
• [PATCH v2 5/7] staging: most: fix typo in Kconfig
  • From: Christian Gromm <christian.gromm@xxxxxxxxxxxxx>
• [PATCH v2 4/7] staging: most: usb: use dev_dbg function
  • From: Christian Gromm <christian.gromm@xxxxxxxxxxxxx>
• [PATCH v2 3/7] staging: most: usb: check number of reported endpoints
  • From: Christian Gromm <christian.gromm@xxxxxxxxxxxxx>
• [PATCH v2 2/7] staging: most: usb: remove reference to USB error codes
  • From: Christian Gromm <christian.gromm@xxxxxxxxxxxxx>
• [PATCH v2 1/7] staging: most: usb: use dev_*() functions to print messages
  • From: Christian Gromm <christian.gromm@xxxxxxxxxxxxx>
• [PATCH v2 0/7] staging: most: usb: fix issues found in code audit
  • From: Christian Gromm <christian.gromm@xxxxxxxxxxxxx>
• Re: [PATCH] usb: musb: return -ESHUTDOWN in urb when three-strikes error happened
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCH v2 6/6] USB: serial: ch341: Simulate break condition if not supported
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] usb: musb: return -ESHUTDOWN in urb when three-strikes error happened
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: usbfs: fix mmap dma mismatch
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH] usb: musb: return -ESHUTDOWN in urb when three-strikes error happened
  • From: Bin Liu <b-liu@xxxxxx>
• Re: [PATCH v2 4/6] USB: serial: ch341: Name prescaler, divisor registers
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] usb: gadget: u_serial: fix coverity warning: negative index at array
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: dummy-hcd: use configurable endpoint naming scheme
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/6] USB: serial: ch341: Limit prescaler on quirky chips
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH REPOST v13 0/4] usb: xhci: Add support for Renesas USB controllers
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/6] USB: serial: ch341: Add basis for quirk detection
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH 3/7] staging: most: usb: check number of reported endpoints
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/7] staging: most: usb: remove reference to USB error codes
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/6] USB: serial: ch341: Add support for limited chips (was: Add support for HL340 devices)
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH 6/7] staging: most: usb: use macro ATTRIBUTE_GROUPS
  • From: Christian Gromm <christian.gromm@xxxxxxxxxxxxx>
• [PATCH 3/7] staging: most: usb: check number of reported endpoints
  • From: Christian Gromm <christian.gromm@xxxxxxxxxxxxx>
• [PATCH 7/7] Documentation: ABI: correct sysfs attribute description of MOST driver
  • From: Christian Gromm <christian.gromm@xxxxxxxxxxxxx>
• [PATCH 5/7] staging: most: fix typo in Kconfig
  • From: Christian Gromm <christian.gromm@xxxxxxxxxxxxx>
• [PATCH 1/7] staging: most: usb: use dev_*() functions to print messages
  • From: Christian Gromm <christian.gromm@xxxxxxxxxxxxx>
• [PATCH 4/7] staging: most: usb: use dev_dbg function
  • From: Christian Gromm <christian.gromm@xxxxxxxxxxxxx>
• [PATCH 2/7] staging: most: usb: remove reference to USB error codes
  • From: Christian Gromm <christian.gromm@xxxxxxxxxxxxx>
• [PATCH 0/7] staging: most: usb: fix issues found in code audit
  • From: Christian Gromm <christian.gromm@xxxxxxxxxxxxx>
• Re: [PATCH 00/15] Fix STM32 DT issues on v5.7-rc4
  • From: Alexandre Torgue <alexandre.torgue@xxxxxx>
• Re: sound over USB
  • From: Subhashini Rao Beerisetty <subhashbeerisetty@xxxxxxxxx>
• Re: [PATCH 00/13] usb: dwc3: meson: add OTG support for GXL/GXM
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• Re: [PATCH 00/13] usb: dwc3: meson: add OTG support for GXL/GXM
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [PATCH net/next] r8152: Use MAC address from device tree if available
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• [PATCH REPOST v13 4/4] usb: renesas-xhci: Add ROM loader for uPD720201
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH REPOST v13 3/4] usb: xhci: Add support for Renesas controller with memory
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH REPOST v13 2/4] usb: renesas-xhci: Add the renesas xhci driver
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH REPOST v13 1/4] usb: hci: add hc_driver as argument for usb_hcd_pci_probe
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH REPOST v13 0/4] usb: xhci: Add support for Renesas USB controllers
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v13 5/5] usb: xhci: provide a debugfs hook for erasing rom
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH] USB: usbfs: fix mmap dma mismatch
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [balbi-usb:testing/next 78/89] drivers/usb/dwc3/gadget.c:2842:7: error: implicit declaration of function 'DWC3_VER_IS_WITHIN'
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• [balbi-usb:testing/next 78/89] drivers/usb/dwc3/gadget.c:2842:7: error: implicit declaration of function 'DWC3_VER_IS_WITHIN'
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH] USB: usbfs: fix mmap dma mismatch
  • From: Christoph Hellwig <hch@xxxxxx>
• RE: [PATCH] usb: dwc3: allow dual role switch by defautl for new IP w/o OTG
  • From: Jun Li <jun.li@xxxxxxx>
• Re: [PATCH v13 5/5] usb: xhci: provide a debugfs hook for erasing rom
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: usbfs: fix mmap dma mismatch
  • From: Jeremy Linton <jeremy.linton@xxxxxxx>
• Re: [PATCH v7 2/4] usb: dwc3: qcom: Add interconnect support in dwc3 driver
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• Re: [PATCH v7 2/4] usb: dwc3: qcom: Add interconnect support in dwc3 driver
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• [PATCH] USB: usbfs: fix mmap dma mismatch
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v13 5/5] usb: xhci: provide a debugfs hook for erasing rom
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: Validating dma_mmap_coherent() parameters before calling (was Re: WARNING in memtype_reserve)
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: Validating dma_mmap_coherent() parameters before calling (was Re: WARNING in memtype_reserve)
  • From: Jeremy Linton <jeremy.linton@xxxxxxx>
• Re: Validating dma_mmap_coherent() parameters before calling (was Re: WARNING in memtype_reserve)
  • From: Jeremy Linton <jeremy.linton@xxxxxxx>
• Re: Validating dma_mmap_coherent() parameters before calling (was Re: WARNING in memtype_reserve)
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: Validating dma_mmap_coherent() parameters before calling (was Re: WARNING in memtype_reserve)
  • From: Jeremy Linton <jeremy.linton@xxxxxxx>
• [PATCH 2/2] usb: host: xhci-plat: keep runtime active when removing host
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [PATCH 1/2] usb: xhci: Fix NULL pointer dereference when enqueuing trbs from urb sg list
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• [PATCH 0/2] xhci fixes for usb-linus
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: [PATCH] usb: dwc3: allow dual role switch by defautl for new IP w/o OTG
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• Re: [PATCH v7 0/4] ADD interconnect support for Qualcomm DWC3 driver
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• Re: WARNING in memtype_reserve
  • From: syzbot <syzbot+353be47c9ce21b68b7ed@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 00/11] usb: dwc3: gadget: Handle streams
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• Re: [PATCH v2] usb: host: xhci-plat: keep runtime active when remove host
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: [PATCH v3] usb: dwc3: support continuous runtime PM with dual role
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• Re: [PATCH 4/5] usb: dwc3: gadget: Handle transfer completion
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• Re: WARNING in memtype_reserve
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/8] drivers: most: add usb adapter driver
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v13 5/5] usb: xhci: provide a debugfs hook for erasing rom
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 00/13] usb: dwc3: meson: add OTG support for GXL/GXM
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• Re: [PATCH 3/3] usb: dwc3: keystone: Turn on USB3 PHY before controller
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• [PATCH v2] usb: host: xhci-plat: keep runtime active when remove host
  • From: Li Jun <jun.li@xxxxxxx>
• [PATCH v2 8/8] Documentation: ABI: correct sysfs attribute description of MOST driver
  • From: Christian Gromm <christian.gromm@xxxxxxxxxxxxx>
• [PATCH v2 7/8] drivers: most: usb: use macro ATTRIBUTE_GROUPS
  • From: Christian Gromm <christian.gromm@xxxxxxxxxxxxx>
• [PATCH v2 5/8] drivers: most: usb: use dev_dbg function
  • From: Christian Gromm <christian.gromm@xxxxxxxxxxxxx>
• [PATCH v2 6/8] drivers: most: fix typo in Kconfig
  • From: Christian Gromm <christian.gromm@xxxxxxxxxxxxx>
• [PATCH v2 4/8] drivers: most: usb: check number of reported endpoints
  • From: Christian Gromm <christian.gromm@xxxxxxxxxxxxx>
• [PATCH v2 3/8] drivers: most: usb: remove reference to USB error codes
  • From: Christian Gromm <christian.gromm@xxxxxxxxxxxxx>
• [PATCH v2 2/8] drivers: most: usb: use dev_*() functions to print messages
  • From: Christian Gromm <christian.gromm@xxxxxxxxxxxxx>
• [PATCH v2 1/8] drivers: most: add usb adapter driver
  • From: Christian Gromm <christian.gromm@xxxxxxxxxxxxx>
• [PATCH v2 0/8] staging: most: move USB adapter driver to stable branch
  • From: Christian Gromm <christian.gromm@xxxxxxxxxxxxx>
• Re: [PATCH V3 0/8] Tegra XUSB charger detect support
  • From: Nagarjuna Kristam <nkristam@xxxxxxxxxx>
• Re: [PATCH V3 0/8] Tegra XUSB charger detect support
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• Re: [PATCH] usb: gadget: u_serial: fix coverity warning: negative index at array
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• Re: Options for forcing dwc3 gadget to only accept superspeed
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• RE: 回复: [PATCH 1/1] usb: host: xhci-plat: keep runtime active when remove host
  • From: Jun Li <jun.li@xxxxxxx>
• RE: 回复: [PATCH 1/1] usb: host: xhci-plat: keep runtime active when remove host
  • From: Peter Chen <peter.chen@xxxxxxx>
• Re: WARNING in memtype_reserve
  • From: syzbot <syzbot+353be47c9ce21b68b7ed@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: 回复: [PATCH 1/1] usb: host: xhci-plat: keep runtime active when remove host
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: Options for forcing dwc3 gadget to only accept superspeed
  • From: Claus Stovgaard <claus.stovgaard@xxxxxxxxx>
• [PATCH] usb: gadget: u_serial: fix coverity warning: negative index at array
  • From: Macpaul Lin <macpaul.lin@xxxxxxxxxxxx>
• Re: Validating dma_mmap_coherent() parameters before calling (was Re: WARNING in memtype_reserve)
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] usb: dwc3: keystone: Turn on USB3 PHY before controller
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH] usb: musb: mediatek: add reset FADDR to zero in reset interrupt handle
  • From: Min Guo <min.guo@xxxxxxxxxxxx>
• Re: Options for forcing dwc3 gadget to only accept superspeed
  • From: Claus Stovgaard <claus.stovgaard@xxxxxxxxx>
• Re: [PATCH V3 6/8] phy: tegra: xusb: Add support for charger detect
  • From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
• Re: Validating dma_mmap_coherent() parameters before calling (was Re: WARNING in memtype_reserve)
  • From: Christoph Hellwig <hch@xxxxxx>
• Validating dma_mmap_coherent() parameters before calling (was Re: WARNING in memtype_reserve)
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH V3 2/8] usb: gadget: tegra-xudc: Add vbus_draw support
  • From: Nagarjuna Kristam <nkristam@xxxxxxxxxx>
• [PATCH V3 5/8] phy: tegra: xusb: Add soc ops API to enable UTMI PAD protection
  • From: Nagarjuna Kristam <nkristam@xxxxxxxxxx>
• [PATCH V3 7/8] phy: tegra: xusb: Enable charger detect for Tegra186
  • From: Nagarjuna Kristam <nkristam@xxxxxxxxxx>
• [PATCH V3 8/8] phy: tegra: xusb: Enable charger detect for Tegra210
  • From: Nagarjuna Kristam <nkristam@xxxxxxxxxx>
• [PATCH V3 6/8] phy: tegra: xusb: Add support for charger detect
  • From: Nagarjuna Kristam <nkristam@xxxxxxxxxx>
• [PATCH V3 4/8] phy: tegra: xusb: Add USB2 pad power control support for Tegra210
  • From: Nagarjuna Kristam <nkristam@xxxxxxxxxx>
• [PATCH V3 3/8] phy: tegra: xusb: Add support for UTMI pad power control
  • From: Nagarjuna Kristam <nkristam@xxxxxxxxxx>
• [PATCH V3 1/8] dt-bindings: phy: tegra-xusb: Add charger-detect property
  • From: Nagarjuna Kristam <nkristam@xxxxxxxxxx>
• [PATCH V3 0/8] Tegra XUSB charger detect support
  • From: Nagarjuna Kristam <nkristam@xxxxxxxxxx>
• Re: WARNING in memtype_reserve
  • From: Dmitry Vyukov <dvyukov@xxxxxxxxxx>
• Re: WARNING in memtype_reserve
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH] usb: musb: mediatek: add reset FADDR to zero in reset interrupt handle
  • From: Macpaul Lin <macpaul.lin@xxxxxxxxxxxx>
• Re: [PATCH v2] USB: host: ehci-mxc: Add error handling in ehci_mxc_drv_probe()
  • From: Peter Chen <peter.chen@xxxxxxx>
• Re: [PATCH 3/3] usb: dwc3: keystone: Turn on USB3 PHY before controller
  • From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
• Re: 回复: [PATCH 1/1] usb: host: xhci-plat: keep runtime active when remove host
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: musb: return -ESHUTDOWN in urb when three-strikes error happened
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: 回复: [PATCH 1/1] usb: host: xhci-plat: keep runtime active when remove host
  • From: Peter Chen <peter.chen@xxxxxxx>
• Re: [PATCH] [RFC] usb: dwc2: Run the core connect in dwc2_hcd_init()
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH v4] USB: hub: Fix the broken detection of USB3 device in SMSC hub
  • From: Eugeniu Rosca <erosca@xxxxxxxxxxxxxx>
• [PATCH] usb: usb_wwan: do not resubmit rx urb on fatal errors in rx callback
  • From: Bin Liu <b-liu@xxxxxx>
• [PATCH] usb: musb: start session in resume for host port
  • From: Bin Liu <b-liu@xxxxxx>
• [PATCH] usb: musb: return -ESHUTDOWN in urb when three-strikes error happened
  • From: Bin Liu <b-liu@xxxxxx>
• [usb:usb-testing] BUILD SUCCESS c33f4f24b888236b725a9972e0fe5ac6575c68ec
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH 1/5] spi: dt-bindings: sifive: Add missing 2nd register region
  • From: Paul Walmsley <paul.walmsley@xxxxxxxxxx>
• [PATCH] USB: dummy-hcd: use configurable endpoint naming scheme
  • From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
• [usb:usb-linus] BUILD SUCCESS 5c4edcdbcd97fb3fb657898d0463afb84e4fbbb3
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v3] PCI: Use pcie_find_root_port() to get root port of both PCI/PCIe device
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v10 1/5] usb: xhci: Change the XHCI link order in the Makefile
  • From: Alan Cooper <alcooperx@xxxxxxxxx>
• Re: Testing endpoint halt support for raw-gadget
  • From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
• Re: Testing endpoint halt support for raw-gadget
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Testing endpoint halt support for raw-gadget
  • From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
• Re: [PATCH v3 20/20] dt-bindings: ehci/ohci: Allow iommus property
  • From: Sudeep Holla <sudeep.holla@xxxxxxx>
• Re: Testing endpoint halt support for raw-gadget
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>