Magic numbers are difficult to read. Use macros for super-speed-plus BOS descriptor attributes in the composite driver. They're self-documented. So there's no need to provide comments as we did previously for the magic numbers. Signed-off-by: Thinh Nguyen <thinhn@xxxxxxxxxxxx> --- Changes in v4: - None Changes in v3: - None Changes in v2: - None drivers/usb/gadget/composite.c | 41 ++++++++++++++++++++--------------------- 1 file changed, 20 insertions(+), 21 deletions(-) diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index 05b176c82cc5..0aa4cb49aa53 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -13,6 +13,7 @@ #include <linux/module.h> #include <linux/device.h> #include <linux/utsname.h> +#include <linux/bitfield.h> #include <linux/usb/composite.h> #include <linux/usb/otg.h> @@ -743,32 +744,30 @@ static int bos_desc(struct usb_composite_dev *cdev) ssp_cap->bReserved = 0; ssp_cap->wReserved = 0; - /* SSAC = 1 (2 attributes) */ - ssp_cap->bmAttributes = cpu_to_le32(1); + ssp_cap->bmAttributes = + cpu_to_le32(FIELD_PREP(USB_SSP_SUBLINK_SPEED_ATTRIBS, 1) | + FIELD_PREP(USB_SSP_SUBLINK_SPEED_IDS, 0)); - /* Min RX/TX Lane Count = 1 */ ssp_cap->wFunctionalitySupport = - cpu_to_le16((1 << 8) | (1 << 12)); + cpu_to_le16(FIELD_PREP(USB_SSP_MIN_SUBLINK_SPEED_ATTRIBUTE_ID, 0) | + FIELD_PREP(USB_SSP_MIN_RX_LANE_COUNT, 1) | + FIELD_PREP(USB_SSP_MIN_TX_LANE_COUNT, 1)); - /* - * bmSublinkSpeedAttr[0]: - * ST = Symmetric, RX - * LSE = 3 (Gbps) - * LP = 1 (SuperSpeedPlus) - * LSM = 10 (10 Gbps) - */ ssp_cap->bmSublinkSpeedAttr[0] = - cpu_to_le32((3 << 4) | (1 << 14) | (0xa << 16)); - /* - * bmSublinkSpeedAttr[1] = - * ST = Symmetric, TX - * LSE = 3 (Gbps) - * LP = 1 (SuperSpeedPlus) - * LSM = 10 (10 Gbps) - */ + cpu_to_le32(FIELD_PREP(USB_SSP_SUBLINK_SPEED_SSID, 0) | + FIELD_PREP(USB_SSP_SUBLINK_SPEED_LSE, USB_LSE_GBPS) | + FIELD_PREP(USB_SSP_SUBLINK_SPEED_ST, + USB_ST_SYMMETRIC_RX) | + FIELD_PREP(USB_SSP_SUBLINK_SPEED_LP, USB_LP_SSP) | + FIELD_PREP(USB_SSP_SUBLINK_SPEED_LSM, 10)); + ssp_cap->bmSublinkSpeedAttr[1] = - cpu_to_le32((3 << 4) | (1 << 14) | - (0xa << 16) | (1 << 7)); + cpu_to_le32(FIELD_PREP(USB_SSP_SUBLINK_SPEED_SSID, 0) | + FIELD_PREP(USB_SSP_SUBLINK_SPEED_LSE, USB_LSE_GBPS) | + FIELD_PREP(USB_SSP_SUBLINK_SPEED_ST, + USB_ST_SYMMETRIC_TX) | + FIELD_PREP(USB_SSP_SUBLINK_SPEED_LP, USB_LP_SSP) | + FIELD_PREP(USB_SSP_SUBLINK_SPEED_LSM, 10)); } return le16_to_cpu(bos->wTotalLength); -- 2.11.0
