[PATCH RESEND v6 5/5] USB: PHY: JZ4770: Use the generic PHY framework.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Used the generic PHY framework API to create the PHY,
and move the driver to driver/phy/ingenic.

Tested-by: 周正 (Zhou Zheng) <sernia.zhou@xxxxxxxxxxx>
Suggested-by: Felipe Balbi <balbi@xxxxxxxxxx>
Co-developed-by: 漆鹏振 (Qi Pengzhen) <aric.pzqi@xxxxxxxxxxx>
Signed-off-by: 漆鹏振 (Qi Pengzhen) <aric.pzqi@xxxxxxxxxxx>
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@xxxxxxxxxxxxxx>
---

Notes:
    v6:
    New patch.

 drivers/phy/Kconfig                                |   1 +
 drivers/phy/Makefile                               |   1 +
 drivers/phy/ingenic/Kconfig                        |  12 ++
 drivers/phy/ingenic/Makefile                       |   2 +
 .../phy-jz4770.c => phy/ingenic/phy-ingenic-usb.c} | 208 ++++++++++++---------
 drivers/usb/phy/Kconfig                            |   8 -
 drivers/usb/phy/Makefile                           |   1 -
 7 files changed, 134 insertions(+), 99 deletions(-)
 create mode 100644 drivers/phy/ingenic/Kconfig
 create mode 100644 drivers/phy/ingenic/Makefile
 rename drivers/{usb/phy/phy-jz4770.c => phy/ingenic/phy-ingenic-usb.c} (67%)

diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index b3ed94b98d9b..96d7bb85f595 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -55,6 +55,7 @@ source "drivers/phy/broadcom/Kconfig"
 source "drivers/phy/cadence/Kconfig"
 source "drivers/phy/freescale/Kconfig"
 source "drivers/phy/hisilicon/Kconfig"
+source "drivers/phy/ingenic/Kconfig"
 source "drivers/phy/lantiq/Kconfig"
 source "drivers/phy/marvell/Kconfig"
 source "drivers/phy/mediatek/Kconfig"
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index 310c149a9df5..0f88724b4387 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -18,6 +18,7 @@ obj-y					+= broadcom/	\
 					   cadence/	\
 					   freescale/	\
 					   hisilicon/	\
+					   ingenic/	\
 					   intel/	\
 					   lantiq/	\
 					   marvell/	\
diff --git a/drivers/phy/ingenic/Kconfig b/drivers/phy/ingenic/Kconfig
new file mode 100644
index 000000000000..b9581eae89dd
--- /dev/null
+++ b/drivers/phy/ingenic/Kconfig
@@ -0,0 +1,12 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Phy drivers for Ingenic platforms
+#
+config PHY_INGENIC_USB
+	tristate "Ingenic SoCs USB PHY Driver"
+	depends on (MACH_INGENIC && MIPS) || COMPILE_TEST
+	depends on USB_SUPPORT
+	select GENERIC_PHY
+	help
+	  This driver provides USB PHY support for the USB controller found
+	  on the JZ-series and X-series SoCs from Ingenic.
diff --git a/drivers/phy/ingenic/Makefile b/drivers/phy/ingenic/Makefile
new file mode 100644
index 000000000000..65d5ea00fc9d
--- /dev/null
+++ b/drivers/phy/ingenic/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-y		+= phy-ingenic-usb.o
diff --git a/drivers/usb/phy/phy-jz4770.c b/drivers/phy/ingenic/phy-ingenic-usb.c
similarity index 67%
rename from drivers/usb/phy/phy-jz4770.c
rename to drivers/phy/ingenic/phy-ingenic-usb.c
index 23d38cbc150e..c43d53b235d3 100644
--- a/drivers/usb/phy/phy-jz4770.c
+++ b/drivers/phy/ingenic/phy-ingenic-usb.c
@@ -7,12 +7,12 @@
  */
 
 #include <linux/clk.h>
+#include <linux/delay.h>
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/phy.h>
+#include <linux/phy/phy.h>
 
 /* OTGPHY register offsets */
 #define REG_USBPCR_OFFSET			0x00
@@ -97,66 +97,48 @@ enum ingenic_usb_phy_version {
 struct ingenic_soc_info {
 	enum ingenic_usb_phy_version version;
 
-	void (*usb_phy_init)(struct usb_phy *phy);
+	void (*usb_phy_init)(struct phy *phy);
 };
 
-struct jz4770_phy {
+struct ingenic_usb_phy {
 	const struct ingenic_soc_info *soc_info;
 
-	struct usb_phy phy;
-	struct usb_otg otg;
+	struct phy *phy;
 	struct device *dev;
 	void __iomem *base;
 	struct clk *clk;
 	struct regulator *vcc_supply;
 };
 
-static inline struct jz4770_phy *otg_to_jz4770_phy(struct usb_otg *otg)
+static int ingenic_usb_phy_init(struct phy *phy)
 {
-	return container_of(otg, struct jz4770_phy, otg);
-}
-
-static inline struct jz4770_phy *phy_to_jz4770_phy(struct usb_phy *phy)
-{
-	return container_of(phy, struct jz4770_phy, phy);
-}
-
-static int ingenic_usb_phy_set_peripheral(struct usb_otg *otg,
-				     struct usb_gadget *gadget)
-{
-	struct jz4770_phy *priv = otg_to_jz4770_phy(otg);
-	u32 reg;
+	struct ingenic_usb_phy *priv = phy_get_drvdata(phy);
+	int err;
 
-	if (priv->soc_info->version >= ID_X1000) {
-		reg = readl(priv->base + REG_USBPCR1_OFFSET);
-		reg |= USBPCR1_BVLD_REG;
-		writel(reg, priv->base + REG_USBPCR1_OFFSET);
+	err = clk_prepare_enable(priv->clk);
+	if (err) {
+		dev_err(priv->dev, "Unable to start clock: %d\n", err);
+		return err;
 	}
 
-	reg = readl(priv->base + REG_USBPCR_OFFSET);
-	reg &= ~USBPCR_USB_MODE;
-	reg |= USBPCR_VBUSVLDEXT | USBPCR_VBUSVLDEXTSEL | USBPCR_OTG_DISABLE;
-	writel(reg, priv->base + REG_USBPCR_OFFSET);
+	priv->soc_info->usb_phy_init(phy);
 
 	return 0;
 }
 
-static int ingenic_usb_phy_set_host(struct usb_otg *otg, struct usb_bus *host)
+static int ingenic_usb_phy_exit(struct phy *phy)
 {
-	struct jz4770_phy *priv = otg_to_jz4770_phy(otg);
-	u32 reg;
+	struct ingenic_usb_phy *priv = phy_get_drvdata(phy);
 
-	reg = readl(priv->base + REG_USBPCR_OFFSET);
-	reg &= ~(USBPCR_VBUSVLDEXT | USBPCR_VBUSVLDEXTSEL | USBPCR_OTG_DISABLE);
-	reg |= USBPCR_USB_MODE;
-	writel(reg, priv->base + REG_USBPCR_OFFSET);
+	clk_disable_unprepare(priv->clk);
+	regulator_disable(priv->vcc_supply);
 
 	return 0;
 }
 
-static int ingenic_usb_phy_init(struct usb_phy *phy)
+static int ingenic_usb_phy_power_on(struct phy *phy)
 {
-	struct jz4770_phy *priv = phy_to_jz4770_phy(phy);
+	struct ingenic_usb_phy *priv = phy_get_drvdata(phy);
 	int err;
 
 	err = regulator_enable(priv->vcc_supply);
@@ -165,33 +147,71 @@ static int ingenic_usb_phy_init(struct usb_phy *phy)
 		return err;
 	}
 
-	err = clk_prepare_enable(priv->clk);
-	if (err) {
-		dev_err(priv->dev, "Unable to start clock: %d\n", err);
-		return err;
-	}
-
-	priv->soc_info->usb_phy_init(phy);
-
 	return 0;
 }
 
-static void ingenic_usb_phy_shutdown(struct usb_phy *phy)
+static int ingenic_usb_phy_power_off(struct phy *phy)
 {
-	struct jz4770_phy *priv = phy_to_jz4770_phy(phy);
+	struct ingenic_usb_phy *priv = phy_get_drvdata(phy);
 
-	clk_disable_unprepare(priv->clk);
 	regulator_disable(priv->vcc_supply);
+
+	return 0;
 }
 
-static void ingenic_usb_phy_remove(void *phy)
+static int ingenic_usb_phy_set_mode(struct phy *phy,
+				  enum phy_mode mode, int submode)
 {
-	usb_remove_phy(phy);
+	struct ingenic_usb_phy *priv = phy_get_drvdata(phy);
+	u32 reg;
+
+	switch (mode) {
+	case PHY_MODE_USB_HOST:
+		reg = readl(priv->base + REG_USBPCR_OFFSET);
+		reg &= ~(USBPCR_VBUSVLDEXT | USBPCR_VBUSVLDEXTSEL | USBPCR_OTG_DISABLE);
+		reg |= USBPCR_USB_MODE;
+		writel(reg, priv->base + REG_USBPCR_OFFSET);
+
+		break;
+	case PHY_MODE_USB_DEVICE:
+		if (priv->soc_info->version >= ID_X1000) {
+			reg = readl(priv->base + REG_USBPCR1_OFFSET);
+			reg |= USBPCR1_BVLD_REG;
+			writel(reg, priv->base + REG_USBPCR1_OFFSET);
+		}
+
+		reg = readl(priv->base + REG_USBPCR_OFFSET);
+		reg &= ~USBPCR_USB_MODE;
+		reg |= USBPCR_VBUSVLDEXT | USBPCR_VBUSVLDEXTSEL | USBPCR_OTG_DISABLE;
+		writel(reg, priv->base + REG_USBPCR_OFFSET);
+
+		break;
+	case PHY_MODE_USB_OTG:
+		reg = readl(priv->base + REG_USBPCR_OFFSET);
+		reg &= ~USBPCR_OTG_DISABLE;
+		reg |= USBPCR_VBUSVLDEXT | USBPCR_VBUSVLDEXTSEL | USBPCR_USB_MODE;
+		writel(reg, priv->base + REG_USBPCR_OFFSET);
+
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
 }
 
-static void jz4770_usb_phy_init(struct usb_phy *phy)
+static const struct phy_ops ingenic_usb_phy_ops = {
+	.init		= ingenic_usb_phy_init,
+	.exit		= ingenic_usb_phy_exit,
+	.power_on	= ingenic_usb_phy_power_on,
+	.power_off	= ingenic_usb_phy_power_off,
+	.set_mode	= ingenic_usb_phy_set_mode,
+	.owner		= THIS_MODULE,
+};
+
+static void jz4770_usb_phy_init(struct phy *phy)
 {
-	struct jz4770_phy *priv = phy_to_jz4770_phy(phy);
+	struct ingenic_usb_phy *priv = phy_get_drvdata(phy);
 	u32 reg;
 
 	reg = USBPCR_AVLD_REG | USBPCR_COMMONONN | USBPCR_IDPULLUP_ALWAYS |
@@ -206,9 +226,9 @@ static void jz4770_usb_phy_init(struct usb_phy *phy)
 	usleep_range(300, 1000);
 }
 
-static void jz4780_usb_phy_init(struct usb_phy *phy)
+static void jz4780_usb_phy_init(struct phy *phy)
 {
-	struct jz4770_phy *priv = phy_to_jz4770_phy(phy);
+	struct ingenic_usb_phy *priv = phy_get_drvdata(phy);
 	u32 reg;
 
 	reg = readl(priv->base + REG_USBPCR1_OFFSET) | USBPCR1_USB_SEL |
@@ -224,9 +244,9 @@ static void jz4780_usb_phy_init(struct usb_phy *phy)
 	usleep_range(300, 1000);
 }
 
-static void x1000_usb_phy_init(struct usb_phy *phy)
+static void x1000_usb_phy_init(struct phy *phy)
 {
-	struct jz4770_phy *priv = phy_to_jz4770_phy(phy);
+	struct ingenic_usb_phy *priv = phy_get_drvdata(phy);
 	u32 reg;
 
 	reg = readl(priv->base + REG_USBPCR1_OFFSET) | USBPCR1_WORD_IF_16BIT;
@@ -243,9 +263,9 @@ static void x1000_usb_phy_init(struct usb_phy *phy)
 	usleep_range(300, 1000);
 }
 
-static void x1830_usb_phy_init(struct usb_phy *phy)
+static void x1830_usb_phy_init(struct phy *phy)
 {
-	struct jz4770_phy *priv = phy_to_jz4770_phy(phy);
+	struct ingenic_usb_phy *priv = phy_get_drvdata(phy);
 	u32 reg;
 
 	/* rdt */
@@ -298,75 +318,83 @@ static const struct of_device_id ingenic_usb_phy_of_matches[] = {
 };
 MODULE_DEVICE_TABLE(of, ingenic_usb_phy_of_matches);
 
-static int jz4770_phy_probe(struct platform_device *pdev)
+static int ingenic_usb_phy_probe(struct platform_device *pdev)
 {
-	struct device *dev = &pdev->dev;
-	struct jz4770_phy *priv;
+	struct ingenic_usb_phy *priv;
+	struct phy_provider *provider;
 	int err;
 
-	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;
 
+	priv->dev = &pdev->dev;
+
 	priv->soc_info = device_get_match_data(&pdev->dev);
 	if (!priv->soc_info) {
 		dev_err(&pdev->dev, "Error: No device match found\n");
 		return -ENODEV;
 	}
 
-	platform_set_drvdata(pdev, priv);
-	priv->dev = dev;
-	priv->phy.dev = dev;
-	priv->phy.otg = &priv->otg;
-	priv->phy.label = "ingenic-usb-phy";
-	priv->phy.init = ingenic_usb_phy_init;
-	priv->phy.shutdown = ingenic_usb_phy_shutdown;
-
-	priv->otg.state = OTG_STATE_UNDEFINED;
-	priv->otg.usb_phy = &priv->phy;
-	priv->otg.set_host = ingenic_usb_phy_set_host;
-	priv->otg.set_peripheral = ingenic_usb_phy_set_peripheral;
-
 	priv->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(priv->base)) {
-		dev_err(dev, "Failed to map registers\n");
+		dev_err(priv->dev, "Failed to map registers\n");
 		return PTR_ERR(priv->base);
 	}
 
-	priv->clk = devm_clk_get(dev, NULL);
+	priv->clk = devm_clk_get(priv->dev, NULL);
 	if (IS_ERR(priv->clk)) {
 		err = PTR_ERR(priv->clk);
 		if (err != -EPROBE_DEFER)
-			dev_err(dev, "Failed to get clock\n");
+			dev_err(priv->dev, "Failed to get clock\n");
 		return err;
 	}
 
-	priv->vcc_supply = devm_regulator_get(dev, "vcc");
+	priv->vcc_supply = devm_regulator_get(priv->dev, "vcc");
 	if (IS_ERR(priv->vcc_supply)) {
 		err = PTR_ERR(priv->vcc_supply);
 		if (err != -EPROBE_DEFER)
-			dev_err(dev, "Failed to get regulator\n");
+			dev_err(priv->dev, "Failed to get regulator\n");
 		return err;
 	}
 
-	err = usb_add_phy(&priv->phy, USB_PHY_TYPE_USB2);
-	if (err) {
-		if (err != -EPROBE_DEFER)
-			dev_err(dev, "Unable to register PHY\n");
-		return err;
+	priv->phy = devm_phy_create(priv->dev, NULL, &ingenic_usb_phy_ops);
+	if (IS_ERR(priv)) {
+		dev_err(priv->dev, "Failed to create PHY: %ld\n",	PTR_ERR(priv));
+		return PTR_ERR(priv);
 	}
 
-	return devm_add_action_or_reset(dev, ingenic_usb_phy_remove, &priv->phy);
+	provider = devm_of_phy_provider_register(priv->dev, of_phy_simple_xlate);
+	if (IS_ERR(provider)) {
+		dev_err(priv->dev, "Failed to register PHY provider: %ld\n", PTR_ERR(provider));
+		return PTR_ERR(provider);
+	}
+
+	platform_set_drvdata(pdev, priv);
+	phy_set_drvdata(priv->phy, priv);
+
+	return 0;
+}
+
+static int ingenic_usb_phy_remove(struct platform_device *pdev)
+{
+	struct ingenic_usb_phy *priv = platform_get_drvdata(pdev);
+
+	clk_disable_unprepare(priv->clk);
+	regulator_disable(priv->vcc_supply);
+
+	return 0;
 }
 
-static struct platform_driver ingenic_phy_driver = {
-	.probe		= jz4770_phy_probe,
+static struct platform_driver ingenic_usb_phy_driver = {
+	.probe		= ingenic_usb_phy_probe,
+	.remove		= ingenic_usb_phy_remove,
 	.driver		= {
-		.name	= "jz4770-phy",
+		.name	= "ingenic-usb-phy",
 		.of_match_table = of_match_ptr(ingenic_usb_phy_of_matches),
 	},
 };
-module_platform_driver(ingenic_phy_driver);
+module_platform_driver(ingenic_usb_phy_driver);
 
 MODULE_AUTHOR("周琰杰 (Zhou Yanjie) <zhouyanjie@xxxxxxxxxxxxxx>");
 MODULE_AUTHOR("漆鹏振 (Qi Pengzhen) <aric.pzqi@xxxxxxxxxxx>");
diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index ef4787cd3d37..ff24fca0a2d9 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -184,12 +184,4 @@ config USB_ULPI_VIEWPORT
 	  Provides read/write operations to the ULPI phy register set for
 	  controllers with a viewport register (e.g. Chipidea/ARC controllers).
 
-config JZ4770_PHY
-	tristate "Ingenic SoCs Transceiver Driver"
-	depends on MIPS || COMPILE_TEST
-	select USB_PHY
-	help
-	  This driver provides PHY support for the USB controller found
-	  on the JZ-series and X-series SoCs from Ingenic.
-
 endmenu
diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
index b352bdbe8712..df1d99010079 100644
--- a/drivers/usb/phy/Makefile
+++ b/drivers/usb/phy/Makefile
@@ -24,4 +24,3 @@ obj-$(CONFIG_USB_MXS_PHY)		+= phy-mxs-usb.o
 obj-$(CONFIG_USB_ULPI)			+= phy-ulpi.o
 obj-$(CONFIG_USB_ULPI_VIEWPORT)		+= phy-ulpi-viewport.o
 obj-$(CONFIG_KEYSTONE_USB_PHY)		+= phy-keystone.o
-obj-$(CONFIG_JZ4770_PHY)		+= phy-jz4770.o
-- 
2.11.0



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux