If usb-role-switch is present in the device tree, it means that ID and Vbus
signals are not connected to the OTG controller but to an external
component (GPIOs, Type-C controller). In this configuration, usb role
switch is used to force valid sessions on STM32MP15 SoCs.
Acked-by: Minas Harutyunyan <hminas@xxxxxxxxxxxx>
Signed-off-by: Amelie Delaunay <amelie.delaunay@xxxxxx>
---
No changes in v3.
---
drivers/usb/dwc2/params.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c
index ce736d67c7c3..d6690ee7af01 100644
--- a/drivers/usb/dwc2/params.c
+++ b/drivers/usb/dwc2/params.c
@@ -183,9 +183,11 @@ static void dwc2_set_stm32mp15_fsotg_params(struct dwc2_hsotg *hsotg)
static void dwc2_set_stm32mp15_hsotg_params(struct dwc2_hsotg *hsotg)
{
struct dwc2_core_params *p = &hsotg->params;
+ struct device_node *np = hsotg->dev->of_node;
p->otg_cap = DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE;
- p->activate_stm_id_vb_detection = true;
+ p->activate_stm_id_vb_detection =
+ !of_property_read_bool(np, "usb-role-switch");
p->host_rx_fifo_size = 440;
p->host_nperio_tx_fifo_size = 256;
p->host_perio_tx_fifo_size = 256;
--
2.17.1
