Linux USB Users

• Thread Index

• [PATCH V3 2/8] usb: gadget: tegra-xudc: Add vbus_draw support
  • From: Nagarjuna Kristam <nkristam@xxxxxxxxxx>
• [PATCH V3 5/8] phy: tegra: xusb: Add soc ops API to enable UTMI PAD protection
  • From: Nagarjuna Kristam <nkristam@xxxxxxxxxx>
• [PATCH V3 7/8] phy: tegra: xusb: Enable charger detect for Tegra186
  • From: Nagarjuna Kristam <nkristam@xxxxxxxxxx>
• [PATCH V3 8/8] phy: tegra: xusb: Enable charger detect for Tegra210
  • From: Nagarjuna Kristam <nkristam@xxxxxxxxxx>
• [PATCH V3 6/8] phy: tegra: xusb: Add support for charger detect
  • From: Nagarjuna Kristam <nkristam@xxxxxxxxxx>
• [PATCH V3 4/8] phy: tegra: xusb: Add USB2 pad power control support for Tegra210
  • From: Nagarjuna Kristam <nkristam@xxxxxxxxxx>
• [PATCH V3 3/8] phy: tegra: xusb: Add support for UTMI pad power control
  • From: Nagarjuna Kristam <nkristam@xxxxxxxxxx>
• [PATCH V3 1/8] dt-bindings: phy: tegra-xusb: Add charger-detect property
  • From: Nagarjuna Kristam <nkristam@xxxxxxxxxx>
• [PATCH V3 0/8] Tegra XUSB charger detect support
  • From: Nagarjuna Kristam <nkristam@xxxxxxxxxx>
• Re: WARNING in memtype_reserve
  • From: Dmitry Vyukov <dvyukov@xxxxxxxxxx>
• Re: WARNING in memtype_reserve
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH] usb: musb: mediatek: add reset FADDR to zero in reset interrupt handle
  • From: Macpaul Lin <macpaul.lin@xxxxxxxxxxxx>
• Re: [PATCH v2] USB: host: ehci-mxc: Add error handling in ehci_mxc_drv_probe()
  • From: Peter Chen <peter.chen@xxxxxxx>
• Re: [PATCH 3/3] usb: dwc3: keystone: Turn on USB3 PHY before controller
  • From: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
• Re: 回复: [PATCH 1/1] usb: host: xhci-plat: keep runtime active when remove host
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: musb: return -ESHUTDOWN in urb when three-strikes error happened
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: 回复: [PATCH 1/1] usb: host: xhci-plat: keep runtime active when remove host
  • From: Peter Chen <peter.chen@xxxxxxx>
• Re: [PATCH] [RFC] usb: dwc2: Run the core connect in dwc2_hcd_init()
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH v4] USB: hub: Fix the broken detection of USB3 device in SMSC hub
  • From: Eugeniu Rosca <erosca@xxxxxxxxxxxxxx>
• [PATCH] usb: usb_wwan: do not resubmit rx urb on fatal errors in rx callback
  • From: Bin Liu <b-liu@xxxxxx>
• [PATCH] usb: musb: start session in resume for host port
  • From: Bin Liu <b-liu@xxxxxx>
• [PATCH] usb: musb: return -ESHUTDOWN in urb when three-strikes error happened
  • From: Bin Liu <b-liu@xxxxxx>
• [usb:usb-testing] BUILD SUCCESS c33f4f24b888236b725a9972e0fe5ac6575c68ec
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH 1/5] spi: dt-bindings: sifive: Add missing 2nd register region
  • From: Paul Walmsley <paul.walmsley@xxxxxxxxxx>
• [PATCH] USB: dummy-hcd: use configurable endpoint naming scheme
  • From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
• [usb:usb-linus] BUILD SUCCESS 5c4edcdbcd97fb3fb657898d0463afb84e4fbbb3
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v3] PCI: Use pcie_find_root_port() to get root port of both PCI/PCIe device
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v10 1/5] usb: xhci: Change the XHCI link order in the Makefile
  • From: Alan Cooper <alcooperx@xxxxxxxxx>
• Re: Testing endpoint halt support for raw-gadget
  • From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
• Re: Testing endpoint halt support for raw-gadget
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Testing endpoint halt support for raw-gadget
  • From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
• Re: [PATCH v3 20/20] dt-bindings: ehci/ohci: Allow iommus property
  • From: Sudeep Holla <sudeep.holla@xxxxxxx>
• Re: Testing endpoint halt support for raw-gadget
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH USB] usb: raw-gadget: fix null-ptr-deref when reenabling endpoints
  • From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
• Re: [PATCH v10 1/5] usb: xhci: Change the XHCI link order in the Makefile
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH v10 1/5] usb: xhci: Change the XHCI link order in the Makefile
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Testing endpoint halt support for raw-gadget
  • From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
• Re: [PATCH v10 1/5] usb: xhci: Change the XHCI link order in the Makefile
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: WARNING in memtype_reserve
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] thunderbolt: Update Kconfig to allow building on other architectures.
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v10 1/5] usb: xhci: Change the XHCI link order in the Makefile
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH v10 1/5] usb: xhci: Change the XHCI link order in the Makefile
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: WARNING in memtype_reserve
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: WARNING in memtype_reserve
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [PATCH v5 1/2] dt-bindings: usb: qcom,dwc3: Convert USB DWC3 bindings
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH v8 0/4] USB: pci-quirks: Add Raspberry Pi 4 quirk
  • From: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
• Re: [PATCH v10 1/5] usb: xhci: Change the XHCI link order in the Makefile
  • From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
• Re: [PATCH v10 1/5] usb: xhci: Change the XHCI link order in the Makefile
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: sound over USB
  • From: "Sid Spry" <sid@xxxxxxx>
• Re: [PATCH v10 1/5] usb: xhci: Change the XHCI link order in the Makefile
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• [PATCH 02/15] ARM: dts: stm32: update pwm pinctrl node names for stm32f4
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
• [PATCH 01/15] ARM: dts: stm32: remove useless interrupt-names property on stm32f429
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
• [PATCH 03/15] ARM: dts: stm32: update led nodes names for stm32f249-disco
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
• [PATCH 04/15] ARM: dts: stm32: update led nodes names for stm32f469-disco
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
• [PATCH 11/15] ARM: dts: stm32: Update nodes names for stm32mp15 pinctrl
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
• [PATCH 05/15] ARM: dts: stm32: remove useless interrupt-names property on stm32f746
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
• [PATCH 06/15] ARM: dts: stm32: update led nodes names for stm32f429-eval
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
• [PATCH 08/15] ARM: dts: stm32: update led nodes names for stm32f746-eval
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
• [PATCH 00/15] Fix STM32 DT issues on v5.7-rc4
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
• [PATCH 10/15] ARM: dts: stm32: Update nodes names for stm32h743 pinctrl
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
• [PATCH 12/15] ARM: dts: stm32: Add missing #address and #size cells on spi node for stm32mp151
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
• [PATCH 15/15] dt-bindings: usb: dwc2: Fix issues for stm32mp15x SoC
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
• [PATCH 13/15] ARM: dts: stm32: update led nodes names for stm32f746-eval
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
• [PATCH 14/15] dt-bindings: pinctrl: stm32: Add missing interrupts property
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
• [PATCH 09/15] ARM: dts: stm32: remove useless interrupt-names property on stm32f743
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
• [PATCH 07/15] ARM: dts: stm32: update led nodes names for stm32f769-disco
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
• Re: [PATCH 1/1] usb: host: xhci-plat: keep runtime active when remove host
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• 回复: [PATCH 1/1] usb: host: xhci-plat: keep runtime active when remove host
  • From: Jun Li <jun.li@xxxxxxx>
• Re: [PATCH v3 1/1] usb: typec: tps6598x: Add USB role switching logic
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/5] spi: dt-bindings: sifive: Add missing 2nd register region
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH v2] USB: host: ehci-mxc: Add error handling in ehci_mxc_drv_probe()
  • From: Tang Bin <tangbin@xxxxxxxxxxxxxxxxxxxx>
• Re: sound over USB
  • From: Ricard Wanderlof <ricardw@xxxxxxxx>
• [PATCH 3/3] usb: dwc3: keystone: Turn on USB3 PHY before controller
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 2/3] dt-bindings: usb: ti,keystone-dwc3.yaml: Add USB3.0 PHY property
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 1/3] dt-bindings: usb: convert keystone-usb.txt to YAML
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 0/3] usb: dwc3: keystone: Convert binding to YAML
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 1/5] spi: dt-bindings: sifive: Add missing 2nd register region
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] USB: host: ehci: Add error handling in ehci_mxc_drv_probe()
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: host: ehci: Add error handling in ehci_mxc_drv_probe()
  • From: Tang Bin <tangbin@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v13 0/5] usb: xhci: Add support for Renesas USB controllers
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH v2 1/1] phy: phy-cadence-salvo: add phy .init API
  • From: Peter Chen <peter.chen@xxxxxxx>
• Re: [PATCH v13 0/5] usb: xhci: Add support for Renesas USB controllers
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v13 0/5] usb: xhci: Add support for Renesas USB controllers
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: [PATCH v13 5/5] usb: xhci: provide a debugfs hook for erasing rom
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: WARNING in memtype_reserve
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: WARNING in memtype_reserve
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v13 0/5] usb: xhci: Add support for Renesas USB controllers
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [GIT PULL] USB fixes for v5.7-rc
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v13 5/5] usb: xhci: provide a debugfs hook for erasing rom
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: [PATCH v10 1/5] usb: xhci: Change the XHCI link order in the Makefile
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v13 0/5] usb: xhci: Add support for Renesas USB controllers
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/5] spi: dt-bindings: sifive: Add missing 2nd register region
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 2/5] dt-bindings: usb: ehci: Add missing 2nd register region
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v8 0/4] USB: pci-quirks: Add Raspberry Pi 4 quirk
  • From: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
• Re: [PATCH v8 0/4] USB: pci-quirks: Add Raspberry Pi 4 quirk
  • From: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
• RE: [PATCH 1/1] usb: host: xhci-plat: keep runtime active when remove host
  • From: Peter Chen <peter.chen@xxxxxxx>
• Re: [PATCH 1/1] phy: phy-cadence-salvo: add phy .init API
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH 1/1] phy: phy-cadence-salvo: add phy .init API
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH 1/1] phy: phy-cadence-salvo: add phy .init API
  • From: Peter Chen <peter.chen@xxxxxxx>
• [PATCH v3 20/20] dt-bindings: ehci/ohci: Allow iommus property
  • From: Andre Przywara <andre.przywara@xxxxxxx>
• Re: Documentation for Raw USB ConfigFS
  • From: Peter Chen <peter.chen@xxxxxxx>
• [PATCH 5.4 47/90] usb: chipidea: msm: Ensure proper controller reset using role switch API
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 5.6 063/118] usb: chipidea: msm: Ensure proper controller reset using role switch API
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH 1/1] usb: host: xhci-plat: keep runtime active when remove host
  • From: Peter Chen <peter.chen@xxxxxxx>
• Re: [PATCH 4/5] dt-bindings: ufs: ti: Add missing 'additionalProperties: false'
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• Re: [PATCH 3/5] dt-bindings: ufs: ti: Fix address properties handling
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• Re: Documentation for Raw USB ConfigFS
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• Re: Options for forcing dwc3 gadget to only accept superspeed
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• Re: [PATCH 5/5] dt-bindings: Fix incorrect 'reg' property sizes
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v8 4/4] USB: pci-quirks: Add Raspberry Pi 4 quirk
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: Options for forcing dwc3 gadget to only accept superspeed
  • From: "Sid Spry" <sid@xxxxxxx>
• Re: Options for forcing dwc3 gadget to only accept superspeed
  • From: "Sid Spry" <sid@xxxxxxx>
• Re: [PATCH 1/1] usb: host: xhci-plat: keep runtime active when remove host
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: [PATCH 5/5] dt-bindings: Fix incorrect 'reg' property sizes
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• [PATCH 1/5] spi: dt-bindings: sifive: Add missing 2nd register region
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 5/5] dt-bindings: Fix incorrect 'reg' property sizes
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 3/5] dt-bindings: ufs: ti: Fix address properties handling
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 4/5] dt-bindings: ufs: ti: Add missing 'additionalProperties: false'
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 2/5] dt-bindings: usb: ehci: Add missing 2nd register region
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: Options for forcing dwc3 gadget to only accept superspeed
  • From: Claus Stovgaard <claus.stovgaard@xxxxxxxxx>
• Re: Options for forcing dwc3 gadget to only accept superspeed
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Options for forcing dwc3 gadget to only accept superspeed
  • From: Claus Stovgaard <claus.stovgaard@xxxxxxxxx>
• Re: [PATCH 2/4] usb: typec: mux: intel_pmc_mux: Support for static SBU/HSL orientation
  • From: Prashant Malani <pmalani@xxxxxxxxxxxx>
• Re: [PATCH] thunderbolt: Replace zero-length array with flexible-array
  • From: "Gustavo A. R. Silva" <gustavoars@xxxxxxxxxx>
• Re: sound over USB
  • From: Greg KH <greg@xxxxxxxxx>
• sound over USB
  • From: Subhashini Rao Beerisetty <subhashbeerisetty@xxxxxxxxx>
• [balbi-usb:testing/fixes] BUILD SUCCESS 07aa17095faf7d57587349ad3817b0d7985ebde3
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: Documentation for Raw USB ConfigFS
  • From: "Sid Spry" <sid@xxxxxxx>
• [PATCH v10 5/5] usb: host: Add ability to build new Broadcom STB USB drivers
  • From: Al Cooper <alcooperx@xxxxxxxxx>
• [PATCH v10 3/5] usb: xhci: xhci-plat: Add support for Broadcom STB SoC's
  • From: Al Cooper <alcooperx@xxxxxxxxx>
• [PATCH v10 1/5] usb: xhci: Change the XHCI link order in the Makefile
  • From: Al Cooper <alcooperx@xxxxxxxxx>
• [PATCH v10 4/5] usb: ehci: Add new EHCI driver for Broadcom STB SoC's
  • From: Al Cooper <alcooperx@xxxxxxxxx>
• [PATCH v10 2/5] dt-bindings: Add Broadcom STB USB support
  • From: Al Cooper <alcooperx@xxxxxxxxx>
• [PATCH v10 0/5] Add XHCI, EHCI and OHCI support for Broadcom STB SoS's
  • From: Al Cooper <alcooperx@xxxxxxxxx>
• Re: [PATCH v9 4/5] usb: ehci: Add new EHCI driver for Broadcom STB SoC's
  • From: Alan Cooper <alcooperx@xxxxxxxxx>
• Re: [PATCH 2/4] usb: typec: mux: intel_pmc_mux: Support for static SBU/HSL orientation
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH v4] USB: hub: Fix the broken detection of USB3 device in SMSC hub
  • From: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
• Re: [PATCH 1/1] usb: host: xhci-plat: keep runtime active when remove host
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH RFC] drivers: most: add USB adapter driver
  • From: <Christian.Gromm@xxxxxxxxxxxxx>
• [PATCH] usb: dwc3: allow dual role switch by defautl for new IP w/o OTG
  • From: Li Jun <jun.li@xxxxxxx>
• Re: [PATCH RFC] drivers: most: add USB adapter driver
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] usb: raw-gadget: fix gadget endpoint selection
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• RE: [PATCH 1/1] usb: host: xhci-plat: keep runtime active when remove host
  • From: Peter Chen <peter.chen@xxxxxxx>
• Re: [PATCH 1/1] usb: host: xhci-plat: keep runtime active when remove host
  • From: Manu Gautam <mgautam@xxxxxxxxxxxxxx>
• [PATCH 1/1] usb: host: xhci-plat: keep runtime active when remove host
  • From: Peter Chen <peter.chen@xxxxxxx>
• [PATCH -next] usb: gadget: udc: atmel: Make some symbols static
  • From: Samuel Zou <zou_wei@xxxxxxxxxx>
• [PATCH v3 0/1] Add USB role switch to tps6598x
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v3 1/1] usb: typec: tps6598x: Add USB role switching logic
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: usb: dwc2: add power-domains property
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] thunderbolt: Update Kconfig to allow building on other architectures.
  • From: David Manouchehri <david.manouchehri@xxxxxxxxxx>
• Accept our Outstanding Invoice Settlement
  • From: Silvina Portillo <sportillo@xxxxxxxxxxx>
• Re: [PATCH v9 4/5] usb: ehci: Add new EHCI driver for Broadcom STB SoC's
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH v9 0/5] Add XHCI, EHCI and OHCI support for Broadcom STB SoS's
  • From: Al Cooper <alcooperx@xxxxxxxxx>
• [PATCH v9 2/5] dt-bindings: Add Broadcom STB USB support
  • From: Al Cooper <alcooperx@xxxxxxxxx>
• [PATCH v9 5/5] usb: host: Add ability to build new Broadcom STB USB drivers
  • From: Al Cooper <alcooperx@xxxxxxxxx>
• [PATCH v9 4/5] usb: ehci: Add new EHCI driver for Broadcom STB SoC's
  • From: Al Cooper <alcooperx@xxxxxxxxx>
• [PATCH v9 3/5] usb: xhci: xhci-plat: Add support for Broadcom STB SoC's
  • From: Al Cooper <alcooperx@xxxxxxxxx>
• [PATCH v9 1/5] usb: xhci: Change the XHCI link order in the Makefile
  • From: Al Cooper <alcooperx@xxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: usb: ti,tps6598x: add dt binding doc
  • From: Angus Ainslie <angus@xxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: usb: ti,tps6598x: add dt binding doc
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/4] usb: typec: mux: intel_pmc_mux: Support for static SBU/HSL orientation
  • From: Prashant Malani <pmalani@xxxxxxxxxxxx>
• [usb:usb-testing] BUILD SUCCESS 2ca23ae59e997f1b6df7662d8ef10d9c471b46d0
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH RFC] drivers: most: add USB adapter driver
  • From: <Christian.Gromm@xxxxxxxxxxxxx>
• Re: [PATCH RFC] drivers: most: add USB adapter driver
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: [PATCH v8 4/4] USB: pci-quirks: Add Raspberry Pi 4 quirk
  • From: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
• Re: your mail
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 2/4] usb: typec: mux: intel_pmc_mux: Support for static SBU/HSL orientation
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: your mail
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH RFC] drivers: most: add USB adapter driver
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: your mail
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: your mail
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• RE: [PATCH v8 1/5] usb: xhci: Change the XHCI link order in the Makefile
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• Re: [PATCH v2] usb: typec: tps6598x: Add USB role switching logic
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH] thunderbolt: Replace zero-length array with flexible-array
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] usb: typec: tps6598x: Add OF probe binding
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH v3] usb: typec: mux: intel: Fix DP_HPD_LVL bit field
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH RFC] drivers: most: add USB adapter driver
  • From: Christian Gromm <christian.gromm@xxxxxxxxxxxxx>
• [PATCH v3] usb: typec: mux: intel: Fix DP_HPD_LVL bit field
  • From: Prashant Malani <pmalani@xxxxxxxxxxxx>
• Re: [PATCH v2] usb: typec: mux: intel: Fix DP_HPD_LVL bit field
  • From: Prashant Malani <pmalani@xxxxxxxxxxxx>
• Re: [PATCH v2] usb: typec: mux: intel: Fix DP_HPD_LVL bit field
  • From: Lars Melin <larsm17@xxxxxxxxx>
• Re: [PATCH v2 01/10] backlight: Add backlight_device_get_by_name()
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH V2 6/8] phy: tegra: xusb: Add support for charger detect
  • From: Nagarjuna Kristam <nkristam@xxxxxxxxxx>
• Re: [PATCH v2 01/10] backlight: Add backlight_device_get_by_name()
  • From: Jingoo Han <jingoohan1@xxxxxxxxx>
• [PATCH v2] usb: typec: mux: intel: Fix DP_HPD_LVL bit field
  • From: Prashant Malani <pmalani@xxxxxxxxxxxx>
• Re: [PATCH] usb: typec: mux: intel: Fix DP_HPD_LVL bit field
  • From: Benson Leung <bleung@xxxxxxxxxx>
• [PATCH] usb: typec: mux: intel: Fix DP_HPD_LVL bit field
  • From: Prashant Malani <pmalani@xxxxxxxxxxxx>
• [PATCH] r8152: support additional Microsoft Surface Ethernet Adapter variant
  • From: Marc Payne <marc.payne@xxxxxxxxxxxx>
• Re: [PATCH] net: usb: qmi_wwan: remove redundant assignment to variable status
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• Re: USB Attached SCSI breakage due no udev involvement
  • From: Dio Putra <dioput12@xxxxxxxxx>
• Re: USB Attached SCSI breakage due no udev involvement
  • From: Dio Putra <dioput12@xxxxxxxxx>
• Re: USB Attached SCSI breakage due no udev involvement
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: USB Attached SCSI breakage due no udev involvement
  • From: Dio Putra <dioput12@xxxxxxxxx>
• Re: [PATCH] net: usb: qmi_wwan: remove redundant assignment to variable status
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: USB Attached SCSI breakage due no udev involvement
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: USB Attached SCSI breakage due no udev involvement
  • From: Dio Putra <dioput12@xxxxxxxxx>
• Re: USB Attached SCSI breakage due no udev involvement
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: USB Attached SCSI breakage due no udev involvement
  • From: Dio Putra <dioput12@xxxxxxxxx>
• Re: USB Attached SCSI breakage due no udev involvement
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] usb: cdns3: gadget: assign interrupt number to USB gadget structure
  • From: Peter Chen <peter.chen@xxxxxxx>
• [PATCH 1/2] usb: gadget: core: sync interrupt before unbind the udc
  • From: Peter Chen <peter.chen@xxxxxxx>
• USB Attached SCSI breakage due no udev involvement
  • From: Dio Putra <dioput12@xxxxxxxxx>
• [PATCH] net: usb: qmi_wwan: remove redundant assignment to variable status
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• [PATCH] net: usb: qmi_wwan: remove redundant assignment to variable status
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• [PATCH] net: huawei_cdc_ncm: remove redundant assignment to variable ret
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• [PATCH] net: usb: ax88179_178a: remove redundant assignment to variable ret
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• Re: [PATCH v8 2/4] firmware: raspberrypi: Introduce vl805 init routine
  • From: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
• Re: WARNING in memtype_reserve
  • From: Jeremy Linton <jeremy.linton@xxxxxxx>
• Re: [GIT PULL] USB fixes for v5.7-rc
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] usb: raw-gadget: fix gadget endpoint selection
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: roles: Switch on role-switch uevent reporting
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [balbi-usb:testing/fixes] BUILD SUCCESS 6e507644209b4a043363e165855a3a3050c4d40e
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [PATCH v2 08/10] drm: Add Generic USB Display driver
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• [PATCH v2 09/10] drm/gud: Add functionality for the USB gadget side
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• [PATCH v2 10/10] usb: gadget: function: Add Generic USB Display support
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• [PATCH v2 07/10] drm/format-helper: Add drm_fb_swab()
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• [PATCH v2 01/10] backlight: Add backlight_device_get_by_name()
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• [PATCH v2 05/10] drm/client: Add drm_client_modeset_disable()
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• [PATCH v2 04/10] drm/client: Add drm_client_modeset_check()
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• [PATCH v2 06/10] drm/client: Add a way to set modeset, properties and rotation
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• [PATCH v2 00/10] Generic USB Display driver
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• [PATCH v2 03/10] drm/client: Add drm_client_framebuffer_flush()
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• [PATCH v2 02/10] drm/client: Add drm_client_init_from_id()
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• Re: WARNING in memtype_reserve
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH USB v3 3/5] usb: raw-gadget: fix gadget endpoint selection
  • From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
• Re: [PATCH v8 4/5] usb: ehci: Add new EHCI driver for Broadcom STB SoC's
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v3] PCI: Use pcie_find_root_port() to get root port of both PCI/PCIe device
  • From: Yicong Yang <yangyicong@xxxxxxxxxxxxx>
• Re: [PATCH v8 2/4] firmware: raspberrypi: Introduce vl805 init routine
  • From: Stefan Wahren <stefan.wahren@xxxxxxxx>
• Re: [PATCH v8 2/4] firmware: raspberrypi: Introduce vl805 init routine
  • From: Stefan Wahren <wahrenst@xxxxxxx>
• Re: WARNING in memtype_reserve
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [RFC 1/3] usb: dwc3: Resize TX FIFOs to meet EP bursting requirements
  • From: Wesley Cheng <wcheng@xxxxxxxxxxxxxx>
• Re: [PATCH v4 3/9] usb: dwc3: Increase timeout for CmdAct cleared by device controller
  • From: Jun Li <lijun.kernel@xxxxxxxxx>
• [GIT PULL] USB fixes for v5.7-rc
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• Re: [PATCH v4 3/9] usb: dwc3: Increase timeout for CmdAct cleared by device controller
  • From: Jun Li <lijun.kernel@xxxxxxxxx>
• Re: [PATCH v2] usb: raw-gadget: fix gadget endpoint selection
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• Re: [PATCH v2 2/2] usb: typec: tps6598x: Add OF probe binding
  • From: Martin Kepplinger <martin.kepplinger@xxxxxxx>
• Re: [PATCH USB v3 3/5] usb: raw-gadget: fix gadget endpoint selection
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• Re: [PATCH] USB: gadget: fix illegal array access in binding with UDC
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• Re: WARNING in memtype_reserve
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• WARNING in memtype_reserve
  • From: syzbot <syzbot+353be47c9ce21b68b7ed@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: roles: Switch on role-switch uevent reporting
  • From: Wen Yang <wenyang@xxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: host: ehci: Add error handlinginehci_mxc_drv_probe()
  • From: Tang Bin <tangbin@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v8 4/5] usb: ehci: Add new EHCI driver for Broadcom STB SoC's
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v8 5/5] usb: host: Add ability to build new Broadcom STB USB drivers
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH v8 4/5] usb: ehci: Add new EHCI driver for Broadcom STB SoC's
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH v8 3/5] usb: xhci: xhci-plat: Add support for Broadcom STB SoC's
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH v8 2/5] dt-bindings: Add Broadcom STB USB support
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH v8 1/5] usb: xhci: Change the XHCI link order in the Makefile
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• [PATCH] usb: mtu3: constify struct debugfs_reg32
  • From: Rikard Falkeborn <rikard.falkeborn@xxxxxxxxx>
• [PATCH v8 1/5] usb: xhci: Change the XHCI link order in the Makefile
  • From: Al Cooper <alcooperx@xxxxxxxxx>
• [PATCH v8 4/5] usb: ehci: Add new EHCI driver for Broadcom STB SoC's
  • From: Al Cooper <alcooperx@xxxxxxxxx>
• [PATCH v8 2/5] dt-bindings: Add Broadcom STB USB support
  • From: Al Cooper <alcooperx@xxxxxxxxx>
• [PATCH v8 5/5] usb: host: Add ability to build new Broadcom STB USB drivers
  • From: Al Cooper <alcooperx@xxxxxxxxx>
• [PATCH v8 3/5] usb: xhci: xhci-plat: Add support for Broadcom STB SoC's
  • From: Al Cooper <alcooperx@xxxxxxxxx>
• [PATCH v8 0/5] Add XHCI, EHCI and OHCI support for Broadcom STB SoS's
  • From: Al Cooper <alcooperx@xxxxxxxxx>
• Re: [PATCH v7 4/5] usb: ehci: Add new EHCI driver for Broadcom STB SoC's
  • From: Alan Cooper <alcooperx@xxxxxxxxx>
• Re: [PATCH] USB: host: ehci: Add error handling in ehci_mxc_drv_probe()
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: host: ehci: Add error handlinginehci_mxc_drv_probe()
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v7 4/5] usb: ehci: Add new EHCI driver for Broadcom STB SoC's
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] USB: host: ehci-mxc: Use the defined variable to simplify code
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] USB: EHCI: ehci-mv: Fix unused assignment in mv_ehci_probe()
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] usb: roles: Switch on role-switch uevent reporting
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v2 0/2] Add TI tps6598x DT binding and probe
  • From: Angus Ainslie <angus@xxxxxxxx>
• Re: [GIT PULL] USB driver fixes for 5.7-rc5
  • From: pr-tracker-bot@xxxxxxxxxx
• Re: [PATCH v2] PCI: Use pci_pcie_find_root_port() to get root port
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH] USB: host: ehci: Add error handlinginehci_mxc_drv_probe()
  • From: Tang Bin <tangbin@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/2] Add TI tps6598x DT binding and probe
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v2] USB: host: ehci-mxc: Use the defined variable to simplify code
  • From: Tang Bin <tangbin@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: host: ehci: Add error handling inehci_mxc_drv_probe()
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: host: ehci: Use the defined variable to simplifycode
  • From: Tang Bin <tangbin@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/2] Add TI tps6598x DT binding and probe
  • From: Angus Ainslie <angus@xxxxxxxx>
• [PATCH v2] USB: EHCI: ehci-mv: Fix unused assignment in mv_ehci_probe()
  • From: Tang Bin <tangbin@xxxxxxxxxxxxxxxxxxxx>
• [GIT PULL] USB driver fixes for 5.7-rc5
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: EHCI: ehci-mv: Fix unused assignment in mv_ehci_probe()
  • From: Tang Bin <tangbin@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/2] Add TI tps6598x DT binding and probe
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH] USB: host: ehci: Use the defined variable to simplify code
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: host: ehci: Add error handling inehci_mxc_drv_probe()
  • From: Tang Bin <tangbin@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: host: ehci: Add error handling in ehci_mxc_drv_probe()
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: KASAN: slab-out-of-bounds Read in hfa384x_usbin_callback
  • From: Dmitry Vyukov <dvyukov@xxxxxxxxxx>
• Re: [PATCH] USB: EHCI: ehci-mv: Fix unused assignment in mv_ehci_probe()
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] PCI: Use pci_pcie_find_root_port() to get root port
  • From: Yicong Yang <yangyicong@xxxxxxxxxxxxx>
• Re: [RFC 1/3] usb: dwc3: Resize TX FIFOs to meet EP bursting requirements
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• Re: [PATCH] usb: dwc3: use readl_poll_timeout_atomic for register polling
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• Re: [PATCH v4 3/9] usb: dwc3: Increase timeout for CmdAct cleared by device controller
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• Re: [PATCH v4 3/9] usb: dwc3: Increase timeout for CmdAct cleared by device controller
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• Re: [PATCH v4 3/9] usb: dwc3: Increase timeout for CmdAct cleared by device controller
  • From: Jun Li <lijun.kernel@xxxxxxxxx>
• [PATCH] USB: host: ehci: Use the defined variable to simplify code
  • From: Tang Bin <tangbin@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: host: ehci: Add error handling in ehci_mxc_drv_probe()
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] USB: host: ehci: Add error handling in ehci_mxc_drv_probe()
  • From: Tang Bin <tangbin@xxxxxxxxxxxxxxxxxxxx>
• [PATCH] USB: EHCI: ehci-mv: Fix unused assignment in mv_ehci_probe()
  • From: Tang Bin <tangbin@xxxxxxxxxxxxxxxxxxxx>
• [PATCH] USB: EHCI: ehci-mv: fix error handling in mv_ehci_probe()
  • From: Tang Bin <tangbin@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/4] usb: typec: mux: intel_pmc_mux: Support for static SBU/HSL orientation
  • From: Prashant Malani <pmalani@xxxxxxxxxxxx>
• Re: [PATCH 2/4] usb: typec: mux: intel_pmc_mux: Support for static SBU/HSL orientation
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: KASAN: slab-out-of-bounds Read in hfa384x_usbin_callback
  • From: Dmitry Vyukov <dvyukov@xxxxxxxxxx>
• Re: KASAN: slab-out-of-bounds Read in hfa384x_usbin_callback
  • From: Dmitry Vyukov <dvyukov@xxxxxxxxxx>
• [PATCH] usb: dwc3: use readl_poll_timeout_atomic for register polling
  • From: Li Jun <jun.li@xxxxxxx>
• Re: [PATCH v7 0/4] ADD interconnect support for Qualcomm DWC3 driver
  • From: "Sandeep Maheswaram (Temp)" <sanm@xxxxxxxxxxxxxx>
• Re: [PATCH 2/4] usb: typec: mux: intel_pmc_mux: Support for static SBU/HSL orientation
  • From: Prashant Malani <pmalani@xxxxxxxxxxxx>
• [RFC 2/3] arm64: boot: dts: qcom: sm8150: Enable dynamic TX FIFO resize logic
  • From: Wesley Cheng <wcheng@xxxxxxxxxxxxxx>
• [RFC 3/3] dt-bindings: usb: dwc3: Add entry for tx-fifo-resize
  • From: Wesley Cheng <wcheng@xxxxxxxxxxxxxx>
• [RFC 1/3] usb: dwc3: Resize TX FIFOs to meet EP bursting requirements
  • From: Wesley Cheng <wcheng@xxxxxxxxxxxxxx>
• [RFC 0/3] Re-introduce TX FIFO resize for larger EP bursting
  • From: Wesley Cheng <wcheng@xxxxxxxxxxxxxx>
• [PATCH v2] usb: typec: tps6598x: Add USB role switching logic
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v2 0/1] Add USB role switch to tps6598x
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v8 4/4] USB: pci-quirks: Add Raspberry Pi 4 quirk
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v8 3/4] PCI: brcmstb: Wait for Raspberry Pi's firmware when present
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v8 2/4] firmware: raspberrypi: Introduce vl805 init routine
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v8 1/4] soc: bcm2835: Add notify xHCI reset property
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v2 0/2] Add TI tps6598x DT binding and probe
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: usb: Add TI tps6598x device tree binding documentation
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v2 2/2] usb: typec: tps6598x: Add OF probe binding
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH] thunderbolt: Replace zero-length array with flexible-array
  • From: "Gustavo A. R. Silva" <gustavoars@xxxxxxxxxx>
• [PATCH v7 3/5] usb: xhci: xhci-plat: Add support for Broadcom STB SoC's
  • From: Al Cooper <alcooperx@xxxxxxxxx>
• [PATCH v7 2/5] dt-bindings: Add Broadcom STB USB support
  • From: Al Cooper <alcooperx@xxxxxxxxx>
• [PATCH v7 1/5] usb: xhci: Change the XHCI link order in the Makefile
  • From: Al Cooper <alcooperx@xxxxxxxxx>
• [PATCH v7 5/5] usb: host: Add ability to build new Broadcom STB USB drivers
  • From: Al Cooper <alcooperx@xxxxxxxxx>
• [PATCH v7 4/5] usb: ehci: Add new EHCI driver for Broadcom STB SoC's
  • From: Al Cooper <alcooperx@xxxxxxxxx>
• [PATCH v7 0/5] Add XHCI, EHCI and OHCI support for Broadcom STB SoS's
  • From: Al Cooper <alcooperx@xxxxxxxxx>
• [PATCH USB v3 1/5] usb: raw-gadget: fix return value of ep read ioctls
  • From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
• [PATCH USB v3 2/5] usb: raw-gadget: improve uapi headers comments
  • From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
• [PATCH USB v3 5/5] usb: raw-gadget: documentation updates
  • From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
• [PATCH USB v3 4/5] usb: raw-gadget: support stalling/halting/wedging endpoints
  • From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
• [PATCH USB v3 3/5] usb: raw-gadget: fix gadget endpoint selection
  • From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
• [PATCH USB v3 0/5] usb: raw-gadget: fixes for 5.7-rcN
  • From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
• [usb:usb-linus] BUILD SUCCESS 91edf63d5022bd0464788ffb4acc3d5febbaf81d
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [RFC PATCH v2 1/4] dt-bindings: usb: Add documentation for SG trb cache size quirk
  • From: Tejas Joglekar <Tejas.Joglekar@xxxxxxxxxxxx>
• Re: [RFC PATCH v2 1/4] dt-bindings: usb: Add documentation for SG trb cache size quirk
  • From: Tejas Joglekar <Tejas.Joglekar@xxxxxxxxxxxx>
• Re: [PATCH v2 0/3] Remove the USB EP configuration from device tree
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx>
• [PATCH v2 1/3] usb: gadget: udc: atmel: Don't use DT to configure end point
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx>
• [PATCH v2 0/3]
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx>
• [PATCH v2 3/3] ARM: dts: at91: Remove the USB EP child node
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx>
• [PATCH v2 2/3] dt-bindings: usb: atmel: Mark EP child node as deprecated
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx>
• Re: KASAN: slab-out-of-bounds Read in hfa384x_usbin_callback
  • From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
• [PATCH 0/4] usb: typec: Intel PMC driver changes
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH 1/4] usb: typec: Add typec_find_orientation()
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH 3/4] usb: typec: Add firmware documentation for the Intel PMC mux control
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH 4/4] MAINTAINERS: Add entry for Intel PMC mux driver
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH 2/4] usb: typec: mux: intel_pmc_mux: Support for static SBU/HSL orientation
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] usb: raw-gadget: fix gadget endpoint selection
  • From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
• Re: [PATCH 0/1] Add USB role switch to tps6598x
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH] USB: uas: Add US_FL_NO_REPORT_OPCODES for LaCie 2Big Quadra USB3 external disk
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH] USB: uas: Add US_FL_NO_REPORT_OPCODES for LaCie 2Big Quadra USB3 external disk
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/1] Add USB role switch to tps6598x
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] USB: Remove dead code in usb_choose_configuration()
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] USB: uas: Add US_FL_NO_REPORT_OPCODES for LaCie 2Big Quadra USB3 external disk
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: unusual_uas.h additional entry
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 1/1] usb: typec: tps6598x: Add USB role switching logic
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH 0/1] Add USB role switch to tps6598x
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH 2/2] usb: typec: tps6598x: Add OF probe binding
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: usb: Add TI tps6598x device tree binding documentation
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH 2/2] usb: typec: tps6598x: Add OF probe binding
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH 1/2] dt-bindings: usb: Add TI tps6598x device tree binding documentation
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH 0/2] Add TI tps6598x DT binding and probe
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v2 17/17] dt-bindings: ehci/ohci: Allow iommus property
  • From: Andre Przywara <andre.przywara@xxxxxxx>
• [PATCH] USB: Remove dead code in usb_choose_configuration()
  • From: Jason Yan <yanaijie@xxxxxxxxxx>
• Re: [PATCH] xhci: Make debug message consistent with bus and port number
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 3/4] usb: ehci: Add new EHCI driver for Broadcom STB SoC's
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH] usblp: poison URBs upon disconnect
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• Re: [PATCH] xhci: Make debug message consistent with bus and port number
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] xhci: Make debug message consistent with bus and port number
  • From: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
• Re: [PATCH] xhci: Make debug message consistent with bus and port number
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] xhci: Make debug message consistent with bus and port number
  • From: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
• RE: [PATCH 1/1] usb: chipidea: msm: Ensure proper controller reset using role switch API
  • From: Peter Chen <peter.chen@xxxxxxx>
• Re: [PATCH 1/1] usb: chipidea: msm: Ensure proper controller reset using role switch API
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/1] usb: chipidea: msm: Ensure proper controller reset using role switch API
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] xhci: Make debug message consistent with bus and port number
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 3/4] usb: ehci: Add new EHCI driver for Broadcom STB SoC's
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 3/4] usb: ehci: Add new EHCI driver for Broadcom STB SoC's
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] usb: devio: fix mmap() on non-coherent DMA architectures
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] xhci: Make debug message consistent with bus and port number
  • From: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
• [PATCH 1/1] phy: phy-cadence-salvo: add phy .init API
  • From: Peter Chen <peter.chen@xxxxxxx>
• Re: [PATCH v2 1/2] usb: dwc3: Add support for DWC_usb32 IP
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [PATCH -next] usb: gadget: legacy: fix error return code in cdc_bind()
  • From: Wei Yongjun <weiyongjun1@xxxxxxxxxx>
• [PATCH -next] usb: gadget: legacy: fix error return code in gncm_bind()
  • From: Wei Yongjun <weiyongjun1@xxxxxxxxxx>
• Re: [PATCH v2] xhci: Set port link to RxDetect if port is not enabled after resume
  • From: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
• Re: [PATH v4 1/2] phy: cadence: salvo: add salvo phy driver
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATH v4 1/2] phy: cadence: salvo: add salvo phy driver
  • From: Peter Chen <hzpeterchen@xxxxxxxxx>
• Re: [PATCH v4 3/9] usb: dwc3: Increase timeout for CmdAct cleared by device controller
  • From: Jun Li <lijun.kernel@xxxxxxxxx>
• Re: [PATCH v2] usb: devio: fix mmap() on non-coherent DMA architectures
  • From: Gavin Li <gavinli@xxxxxxxxxxxxxx>
• [PATCH v2] usb: devio: fix mmap() on non-coherent DMA architectures
  • From: gavinli@xxxxxxxxxxxxxx
• [PATCH 1/1] usb: chipidea: msm: Ensure proper controller reset using role switch API
  • From: Peter Chen <peter.chen@xxxxxxxxxx>
• [PATCH 0/1] usb: chipidea: fixes for v5.7
  • From: Peter Chen <peter.chen@xxxxxxxxxx>
• [usb:usb-linus] BUILD SUCCESS 084d7e78467534eedaf0d6c72086a6817023d839
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v4 3/9] usb: dwc3: Increase timeout for CmdAct cleared by device controller
  • From: John Stultz <john.stultz@xxxxxxxxxx>
• Re: [PATCH v6 3/4] usb: ehci: Add new EHCI driver for Broadcom STB SoC's
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v6 3/4] usb: ehci: Add new EHCI driver for Broadcom STB SoC's
  • From: Alan Cooper <alcooperx@xxxxxxxxx>
• Re: [RFC PATCH v2 1/4] dt-bindings: usb: Add documentation for SG trb cache size quirk
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [RFC PATCH v2 1/4] dt-bindings: usb: Add documentation for SG trb cache size quirk
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: KASAN: use-after-free Read in usblp_bulk_read
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] PCI: Use pci_pcie_find_root_port() to get root port
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• [PATCH 0/2] tps6598x: add device tree hooks and document
  • From: Angus Ainslie <angus@xxxxxxxx>
• [PATCH 2/2] dt-bindings: usb: ti,tps6598x: add dt binding doc
  • From: Angus Ainslie <angus@xxxxxxxx>
• [PATCH 1/2] usb: typec: tps6598x: add device tree hooks
  • From: Angus Ainslie <angus@xxxxxxxx>
• Re: [PATCH v6 4/4] usb: host: Add ability to build new Broadcom STB USB drivers
  • From: Alan Cooper <alcooperx@xxxxxxxxx>
• Re: [PATCH] usb: gadget: tegra-xudc: Fix idle suspend/resume
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: KASAN: use-after-free Read in usblp_bulk_read
  • From: Pete Zaitcev <zaitcev@xxxxxxxxxx>
• Re: [GIT PULL] USB-serial fixes for 5.7-rc5
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• AW: [PATCH -next] USB: ohci-sm501: fix error return code in ohci_hcd_sm501_drv_probe()
  • From: Walter Harms <wharms@xxxxxx>
• [GIT PULL] USB-serial fixes for 5.7-rc5
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH -next] USB: ohci-sm501: fix error return code in ohci_hcd_sm501_drv_probe()
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: KASAN: use-after-free Read in usblp_bulk_read
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH -next] USB: ohci-sm501: fix error return code in ohci_hcd_sm501_drv_probe()
  • From: Wei Yongjun <weiyongjun1@xxxxxxxxxx>
• [PATCH v2] PCI: Use pci_pcie_find_root_port() to get root port
  • From: Yicong Yang <yangyicong@xxxxxxxxxxxxx>
• Re: KASAN: slab-out-of-bounds Read in hfa384x_usbin_callback
  • From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
• Re: Documentation for Raw USB ConfigFS
  • From: Peter Chen <peter.chen@xxxxxxx>
• Re: KASAN: use-after-free Read in usblp_bulk_read
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• Re: [PATCH] usb: gadget: audio: Fix a missing error return value in audio_bind()
  • From: Peter Chen <peter.chen@xxxxxxx>
• Re: [PATCH v4 3/9] usb: dwc3: Increase timeout for CmdAct cleared by device controller
  • From: Jun Li <lijun.kernel@xxxxxxxxx>
• Re: KASAN: slab-out-of-bounds Read in hfa384x_usbin_callback
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• Re: [PATCH v2] usb: usbfs: correct kernel->user page attribute mismatch
  • From: Peter Chen <peter.chen@xxxxxxx>
• [PATCH v13 5/5] usb: xhci: provide a debugfs hook for erasing rom
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH v13 4/5] usb: renesas-xhci: Add ROM loader for uPD720201
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH v13 3/5] usb: xhci: Add support for Renesas controller with memory
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH v13 2/5] usb: renesas-xhci: Add the renesas xhci driver
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH v13 1/5] usb: hci: add hc_driver as argument for usb_hcd_pci_probe
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH v13 0/5] usb: xhci: Add support for Renesas USB controllers
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: KASAN: slab-out-of-bounds Read in gadget_dev_desc_UDC_store
  • From: Kyungtae Kim <kt0755@xxxxxxxxx>
• [PATCH] USB: gadget: fix illegal array access in binding with UDC
  • From: Kyungtae Kim <kt0755@xxxxxxxxx>
• [PATCH v2 11/11] usb: dwc3: gadget: Use SET_EP_PRIME for NoStream
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [PATCH v2 10/11] usb: dwc3: gadget: Handle stream transfers
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [PATCH v2 09/11] usb: dwc3: gadget: Don't prepare beyond a transfer
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [PATCH v2 08/11] usb: dwc3: gadget: Wait for transfer completion
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [PATCH v2 07/11] usb: dwc3: gadget: Handle XferComplete for streams
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [PATCH v2 06/11] usb: dwc3: gadget: Enable XferComplete event
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [PATCH v2 05/11] usb: dwc3: gadget: Refactor TRB completion handler
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [PATCH v2 04/11] usb: dwc3: gadget: Check for in-progress END_TRANSFER
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [PATCH v2 03/11] usb: dwc3: gadget: Continue to process pending requests
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [PATCH v2 02/11] usb: gadget: f_tcm: Inform last stream request
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [PATCH v2 01/11] usb: gadget: Introduce usb_request->is_last
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [PATCH v2 00/11] usb: dwc3: gadget: Handle streams
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [PATCH 0/2] ChipIdea USB role-switch fixes and tweaks
  • From: Peter Chen <peter.chen@xxxxxxx>
• Re: [PATCH 00/16] dts/dt-bindings: Fix Arm Ltd. ARMv8 "boards"
  • From: Rob Herring <robh@xxxxxxxxxx>
• [usb:usb-linus] BUILD SUCCESS 7990be48ef4d87163940d6c04c349c93f0bd9ae7
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH net-next] net: sierra_net: Remove unused inline function
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH 03/16] dt-bindings: ehci/ohci: Allow iommus property (fixed subject line)
  • From: André Przywara <andre.przywara@xxxxxxx>
• Re: [PATCH 00/16] dts/dt-bindings: Fix Arm Ltd. ARMv8 "boards"
  • From: Robin Murphy <robin.murphy@xxxxxxx>
• Re: [PATCH 00/16] dts/dt-bindings: Fix Arm Ltd. ARMv8 "boards"
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [balbi-usb:testing/fixes] BUILD SUCCESS 3c1b14c147ebadd4f7ca3b519202dc5d580b971d
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [balbi-usb:testing/next] BUILD SUCCESS f7ac582effc6ee416eb51e0c3e55836aaf7231ac
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [PATCH 00/16] dts/dt-bindings: Fix Arm Ltd. ARMv8 "boards"
  • From: Andre Przywara <andre.przywara@xxxxxxx>
• Re: Testing endpoint halt support for raw-gadget
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [PATCH v8 0/4] USB: pci-quirks: Add Raspberry Pi 4 quirk
  • From: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
• [PATCH v8 2/4] firmware: raspberrypi: Introduce vl805 init routine
  • From: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
• [PATCH v8 4/4] USB: pci-quirks: Add Raspberry Pi 4 quirk
  • From: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
• [PATCH v8 3/4] PCI: brcmstb: Wait for Raspberry Pi's firmware when present
  • From: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
• [PATCH v8 1/4] soc: bcm2835: Add notify xHCI reset property
  • From: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
• Re: [PATCH] sierra-ms: do not call scsi_get_host_dev()
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 00/29] Convert files to ReST - part 2
  • From: Jonathan Corbet <corbet@xxxxxxx>
• Re: [PATCH v2] usb: raw-gadget: fix gadget endpoint selection
  • From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
• [PATCH] sierra-ms: do not call scsi_get_host_dev()
  • From: Hannes Reinecke <hare@xxxxxxx>
• [PATCH] usb: dwc3: select USB_ROLE_SWITCH
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: KASAN: slab-out-of-bounds Write in betop_probe
  • From: Dmitry Vyukov <dvyukov@xxxxxxxxxx>
• Re: KASAN: slab-out-of-bounds Write in betop_probe
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• Re: [PATCH USB 2/2] usb: raw-gadget: fix typo in uapi headers
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: Testing endpoint halt support for raw-gadget
  • From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
• Re: [PATCH USB 2/2] usb: raw-gadget: fix typo in uapi headers
  • From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
• Re: [PATCH v2] usb: raw-gadget: fix gadget endpoint selection
  • From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
• Re: [PATCH v12 2/5] usb: renesas-xhci: Add the renesas xhci driver
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: KASAN: slab-out-of-bounds Read in hfa384x_usbin_callback
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• Re: [PATCH v12 2/5] usb: renesas-xhci: Add the renesas xhci driver
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v12 2/5] usb: renesas-xhci: Add the renesas xhci driver
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 3/4] usb: ehci: Add new EHCI driver for Broadcom STB SoC's
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 4/4] usb: host: Add ability to build new Broadcom STB USB drivers
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3] usb: dwc3: support continuous runtime PM with dual role
  • From: Martin Kepplinger <martin.kepplinger@xxxxxxx>
• [PATCH net-next] net: sierra_net: Remove unused inline function
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• Re: [PATCH] usb: xhci: Fix NULL pointer dereference as part of completion
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: [PATCH USB 2/2] usb: raw-gadget: fix typo in uapi headers
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• Re: [PATCH 1/1] usb: cdns3: ep0: delete the redundant status stage
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• Re: [PATCH v2] usb: raw-gadget: fix gadget endpoint selection
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• Re: Testing endpoint halt support for raw-gadget
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• Re: Testing endpoint halt support for raw-gadget
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• [PATCH] usb: xhci: Fix NULL pointer dereference as part of completion
  • From: Sriharsha Allenki <sallenki@xxxxxxxxxxxxxx>
• [RESEND][PATCH] dwc3: Remove check for HWO flag in dwc3_gadget_ep_reclaim_trb_sg()
  • From: John Stultz <john.stultz@xxxxxxxxxx>
• Re: [PATCH v7 2/4] firmware: raspberrypi: Introduce vl805 init routine
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• [PATCH 2/2] usb: chipidea: Enable user-space triggered role-switching
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH 1/2] usb: chipidea: msm: Ensure proper controller reset using role switch API
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH 0/2] ChipIdea USB role-switch fixes and tweaks
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v2] usb: usbfs: correct kernel->user page attribute mismatch
  • From: Jeremy Linton <jeremy.linton@xxxxxxx>
• Re: [PATCH v7 2/4] firmware: raspberrypi: Introduce vl805 init routine
  • From: Stefan Wahren <wahrenst@xxxxxxx>
• [PATCH v3] xhci: Prevent runtime suspend on Etron EJ168
  • From: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
• Re: [PATCH] USB: serial: qcserial: Add DW5816e support
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH 02/10] drm: Add backlight helper
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• Re: [PATCH V2 6/8] phy: tegra: xusb: Add support for charger detect
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: Testing endpoint halt support for raw-gadget
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Testing endpoint halt support for raw-gadget
  • From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
• Re: [PATCH v12 2/5] usb: renesas-xhci: Add the renesas xhci driver
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: general protection fault in go7007_usb_probe
  • From: syzbot <syzbot+cabfa4b5b05ff6be4ef0@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: Testing endpoint halt support for raw-gadget
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] xhci: Prevent runtime suspend on Etron EJ168
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Testing endpoint halt support for raw-gadget
  • From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
• Re: general protection fault in go7007_usb_probe
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• Re: [PATCH] usb: usbfs: correct kernel->user page attribute mismatch
  • From: Jeremy Linton <jeremy.linton@xxxxxxx>
• Re: [PATCH v12 2/5] usb: renesas-xhci: Add the renesas xhci driver
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: [PATCH 02/10] drm: Add backlight helper
  • From: Daniel Vetter <daniel@xxxxxxxx>
• [PATCH v2] xhci: Prevent runtime suspend on Etron EJ168
  • From: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
• Re: [PATCH V2 5/8] phy: tegra: xusb: Add soc ops API to enable UTMI PAD protection
  • From: Nagarjuna Kristam <nkristam@xxxxxxxxxx>
• Re: [PATCH] xhci: Prevent runtime suspend all the time with XHCI_RESET_ON_RESUME quirk
  • From: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
• Re: [PATCH] xhci: Prevent runtime suspend all the time with XHCI_RESET_ON_RESUME quirk
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxx>
• Re: [PATCH] xhci: Prevent runtime suspend all the time with XHCI_RESET_ON_RESUME quirk
  • From: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
• Re: [PATCH] xhci: Prevent runtime suspend all the time with XHCI_RESET_ON_RESUME quirk
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• [PATCH v1] usb: dwc3: pci: Enable extcon driver for Intel Merrifield
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH] xhci: Prevent runtime suspend all the time with XHCI_RESET_ON_RESUME quirk
  • From: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
• Re: [PATCH V2 6/8] phy: tegra: xusb: Add support for charger detect
  • From: Nagarjuna Kristam <nkristam@xxxxxxxxxx>
• Re: [PATCH v7 2/4] firmware: raspberrypi: Introduce vl805 init routine
  • From: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
• Re: [PATCH] usb: usbfs: correct kernel->user page attribute mismatch
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 01/10] backlight: Add backlight_device_get_by_name()
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH V2 3/3] usb: gadget: tegra-xudc: add port_speed_quirk
  • From: Nagarjuna Kristam <nkristam@xxxxxxxxxx>
• [PATCH V2 2/3] usb: gadget: tegra-xudc: Add Tegra194 support
  • From: Nagarjuna Kristam <nkristam@xxxxxxxxxx>
• [PATCH V2 1/3] dt-bindings: usb: tegra-xudc: Add Tegra194 XUSB controller support
  • From: Nagarjuna Kristam <nkristam@xxxxxxxxxx>
• [PATCH V2 0/3] Tegra XUDC support on Tegra194 Soc
  • From: Nagarjuna Kristam <nkristam@xxxxxxxxxx>
• Re: [PATCH V2 2/8] usb: gadget: tegra-xudc: Add vbus_draw support
  • From: Nagarjuna Kristam <nkristam@xxxxxxxxxx>
• Re: [PATCH V1 4/4] usb: gadget: tegra-xudc: add port_speed_quirk
  • From: Nagarjuna Kristam <nkristam@xxxxxxxxxx>
• Re: [PATCH] usb: dwc3: gadget: Don't setup more than requested
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [PATCH] net: usb: qmi_wwan: add support for DW5816e
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH 07/10] drm/format-helper: Add drm_fb_swab()
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• Re: [PATCH 06/10] drm/client: Add a way to set modeset, properties and rotation
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• [PATCH] usb: gadget: audio: Fix a missing error return value in audio_bind()
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH 07/10] drm/format-helper: Add drm_fb_swab()
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Re: [PATCH 05/10] drm/client: Add drm_client_modeset_check()
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• Re: [PATCH 04/10] drm/client: Add drm_client_framebuffer_flush()
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• Re: [PATCH 06/10] drm/client: Add a way to set modeset, properties and rotation
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Re: [PATCH 05/10] drm/client: Add drm_client_modeset_check()
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Re: [PATCH 04/10] drm/client: Add drm_client_framebuffer_flush()
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Re: [PATCH] net: usb: qmi_wwan: add support for DW5816e
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH 01/10] backlight: Add backlight_device_get_by_name()
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Re: [PATCH] net: usb: qmi_wwan: add support for DW5816e
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH 08/10] drm: Add Generic USB Display driver
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• [PATCH] net: usb: qmi_wwan: add support for DW5816e
  • From: Matt Jolly <Kangie@footclan.ninja>
• [PATCH] USB: serial: qcserial: Add DW5816e support
  • From: Matt Jolly <Kangie@footclan.ninja>
• Re: [PATCH 1/1] usb: storage: Add quirk for Samsung Fit flash
  • From: Jim Lin <jilin@xxxxxxxxxx>
• Re: [PATCH 1/1] usb: storage: Add quirk for Samsung Fit flash
  • From: Atanas Dinev <atanasd@xxxxxxxxx>
• Re: [PATCH v7 2/4] firmware: raspberrypi: Introduce vl805 init routine
  • From: Stefan Wahren <wahrenst@xxxxxxx>
• [Bug 207219] [BISECTED] Sony Vaio laptop built-in ricoh webcam no longer found on Fedora 31 with 5.4.11 kernel
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [Bug 207219] [BISECTED] Sony Vaio laptop built-in ricoh webcam no longer found on Fedora 31 with 5.4.11 kernel
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [PATCH] usb: dwc3: gadget: Don't setup more than requested
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [Bug 207219] [BISECTED] Sony Vaio laptop built-in ricoh webcam no longer found on Fedora 31 with 5.4.11 kernel
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• Re: [PATCH 08/15] usb: ehci: avoid gcc-10 zero-length-bounds warning
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] USB: core: Fix misleading driver bug report
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 08/15] usb: ehci: avoid gcc-10 zero-length-bounds warning
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [Bug 207219] [BISECTED] Sony Vaio laptop built-in ricoh webcam no longer found on Fedora 31 with 5.4.11 kernel
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• Re: [PATCH] usb: usbfs: correct kernel->user page attribute mismatch
  • From: Jeremy Linton <jeremy.linton@xxxxxxx>
• Re: [PATCH] usb: usbfs: correct kernel->user page attribute mismatch
  • From: Robin Murphy <robin.murphy@xxxxxxx>
• Re: [PATCH 00/10] Generic USB Display driver
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• Re: [PATCH] usb: usbfs: correct kernel->user page attribute mismatch
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: usbfs: correct kernel->user page attribute mismatch
  • From: Marc Zyngier <maz@xxxxxxxxxx>
• Re: [PATCH] usb: usbfs: correct kernel->user page attribute mismatch
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: KASAN: slab-out-of-bounds Read in gadget_dev_desc_UDC_store
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: usbfs: correct kernel->user page attribute mismatch
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 1/1] usb: chipidea: udc: add software sg list support
  • From: Peter Chen <peter.chen@xxxxxxxxxx>
• KASAN: slab-out-of-bounds Read in gadget_dev_desc_UDC_store
  • From: Kyungtae Kim <kt0755@xxxxxxxxx>
• Re: [PATCH 08/15] usb: ehci: avoid gcc-10 zero-length-bounds warning
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [Bug 207219] [BISECTED] Sony Vaio laptop built-in ricoh webcam no longer found on Fedora 31 with 5.4.11 kernel
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [PATCH 00/15] gcc-10 warning fixes
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 08/15] usb: ehci: avoid gcc-10 zero-length-bounds warning
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH] usb: usbfs: correct kernel->user page attribute mismatch
  • From: Jeremy Linton <jeremy.linton@xxxxxxx>
• Re: [External] Re: [PATCH v5 0/8] Add MA USB Host driver
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH v3 2/2] usb: serial: xr_serial: Add gpiochip support
  • From: mani@xxxxxxxxxx
• [PATCH v3 1/2] usb: serial: Add MaxLinear/Exar USB to Serial driver
  • From: mani@xxxxxxxxxx
• [PATCH v3 0/2] Add support for MaxLinear/Exar USB to serial converters
  • From: mani@xxxxxxxxxx
• Re: [PATCH 1/5] usb: gadget: Introduce usb_request->is_last field
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: [PATCH 1/5] usb: gadget: Introduce usb_request->is_last field
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] usb: serial: Add MaxLinear/Exar USB to Serial driver
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH 1/5] usb: gadget: Introduce usb_request->is_last field
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Documentation for Raw USB ConfigFS
  • From: "Sid Spry" <sid@xxxxxxx>
• [PATCH v12 5/5] usb: xhci: provide a debugfs hook for erasing rom
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH v12 4/5] usb: renesas-xhci: Add ROM loader for uPD720201
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH v12 3/5] usb: xhci: Add support for Renesas controller with memory
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH v12 2/5] usb: renesas-xhci: Add the renesas xhci driver
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH v12 1/5] usb: hci: add hc_driver as argument for usb_hcd_pci_probe
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH v12 0/5] usb: xhci: Add support for Renesas USB controllers
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [External] Re: [PATCH v5 0/8] Add MA USB Host driver
  • From: Vladimir Stankovic <vladimir.stankovic@xxxxxxxxxxxxxxx>
• [Bug 207219] [BISECTED] Sony Vaio laptop built-in ricoh webcam no longer found on Fedora 31 with 5.4.11 kernel
  • From: bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
• [usb:usb-linus] BUILD SUCCESS 9f04db234af691007bb785342a06abab5fb34474
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [External] Re: [PATCH v5 5/8] usb: mausb_host: Introduce PAL processing
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 02/10] drm: Add backlight helper
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v11 2/5] usb: renesas-xhci: Add the renesas xhci driver
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [External] Re: [PATCH v5 5/8] usb: mausb_host: Introduce PAL processing
  • From: Vladimir Stankovic <vladimir.stankovic@xxxxxxxxxxxxxxx>
• Re: [PATCH v11 2/5] usb: renesas-xhci: Add the renesas xhci driver
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [External] Re: [PATCH v5 5/8] usb: mausb_host: Introduce PAL processing
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: WARNING in usbhid_raw_request/usb_submit_urb (3)
  • From: syzbot <syzbot+db339689b2101f6f6071@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: KASAN: use-after-free Read in usblp_bulk_read
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: WARNING in usbhid_raw_request/usb_submit_urb (3)
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v11 2/5] usb: renesas-xhci: Add the renesas xhci driver
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v11 2/5] usb: renesas-xhci: Add the renesas xhci driver
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [External] Re: [PATCH v5 5/8] usb: mausb_host: Introduce PAL processing
  • From: Vladimir Stankovic <vladimir.stankovic@xxxxxxxxxxxxxxx>
• Re: [PATCH v11 2/5] usb: renesas-xhci: Add the renesas xhci driver
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/5] usb: gadget: Introduce usb_request->is_last field
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH AUTOSEL 5.6 28/79] usb: dwc3: gadget: Do link recovery for SS and SSP
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.6 34/79] usb: gadget: udc: atmel: Fix vbus disconnect handling
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.6 27/79] usb: dwc3: gadget: Properly set maxpacket limit
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 21/57] usb: gadget: udc: atmel: Fix vbus disconnect handling
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 15/57] usb: dwc3: gadget: Do link recovery for SS and SSP
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 08/30] usb: dwc3: gadget: Do link recovery for SS and SSP
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 07/30] usb: dwc3: gadget: Properly set maxpacket limit
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH 01/10] backlight: Add backlight_device_get_by_name()
  • From: Daniel Vetter <daniel@xxxxxxxx>
• [PATCH AUTOSEL 4.14 07/27] usb: dwc3: gadget: Do link recovery for SS and SSP
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH] usb: typec: intel_pmc_mux: Fix the property names
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH AUTOSEL 5.4 14/57] usb: dwc3: gadget: Properly set maxpacket limit
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: general protection fault in go7007_usb_probe
  • From: syzbot <syzbot+cabfa4b5b05ff6be4ef0@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: general protection fault in go7007_usb_probe
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• [PATCH v6 2/4] usb: xhci: xhci-plat: Add support for Broadcom STB SoC's
  • From: Al Cooper <alcooperx@xxxxxxxxx>
• [PATCH v6 4/4] usb: host: Add ability to build new Broadcom STB USB drivers
  • From: Al Cooper <alcooperx@xxxxxxxxx>
• [PATCH v6 3/4] usb: ehci: Add new EHCI driver for Broadcom STB SoC's
  • From: Al Cooper <alcooperx@xxxxxxxxx>
• [PATCH v6 1/4] dt-bindings: Add Broadcom STB USB support
  • From: Al Cooper <alcooperx@xxxxxxxxx>
• [PATCH v6 0/4] Add XHCI, EHCI and OHCI support for Broadcom STB SoS's
  • From: Al Cooper <alcooperx@xxxxxxxxx>
• Re: [PATCH 01/10] backlight: Add backlight_device_get_by_name()
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• Re: [PATCH 01/10] backlight: Add backlight_device_get_by_name()
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH v11 5/5] usb: xhci: provide a debugfs hook for erasing rom
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH v11 4/5] usb: renesas-xhci: Add ROM loader for uPD720201
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH v11 3/5] usb: xhci: Add support for Renesas controller with memory
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH v11 2/5] usb: renesas-xhci: Add the renesas xhci driver
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH v11 1/5] usb: hci: add hc_driver as argument for usb_hcd_pci_probe
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH v11 0/5] usb: xhci: Add support for Renesas USB controllers
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH 01/10] backlight: Add backlight_device_get_by_name()
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• Re: KASAN: use-after-free Read in usblp_bulk_read
  • From: Oliver Neukum <oneukum@xxxxxxxx>
• Re: [PATCH v10 4/5] usb: renesas-xhci: Add ROM loader for uPD720201
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v10 3/5] usb: xhci: Add support for Renesas controller with memory
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH 01/10] backlight: Add backlight_device_get_by_name()
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v10 3/5] usb: xhci: Add support for Renesas controller with memory
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: [PATCHv3] UAS: add quirk for LaCie 2Big Quadra
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 1/1] usb: cdns3: gadget: prev_req->trb is NULL for ep0
  • From: Peter Chen <peter.chen@xxxxxxx>
• Re: [PATCH v2 1/2] usb: serial: Add MaxLinear/Exar USB to Serial driver
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v10 3/5] usb: xhci: Add support for Renesas controller with memory
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH 1/5] usb: gadget: Introduce usb_request->is_last field
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [PATCH v2 2/2] usb: serial: xr_serial: Add gpiochip support
  • From: mani@xxxxxxxxxx
• [PATCH v2 1/2] usb: serial: Add MaxLinear/Exar USB to Serial driver
  • From: mani@xxxxxxxxxx
• [PATCH v2 0/2] Add support for MaxLinear/Exar USB to serial converters
  • From: mani@xxxxxxxxxx
• RE: [PATCH 1/5] usb: gadget: Introduce usb_request->is_last field
  • From: Peter Chen <peter.chen@xxxxxxx>
• Re: [PATCH 4/5] usb: dwc3: gadget: Handle transfer completion
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• [PATCH USB v2] usb: raw-gadget: support stalling/halting/wedging endpoints
  • From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
• Re: [PATCH USB] usb: raw-gadget: support stalling/halting/wedging endpoints
  • From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
• [PATCH USB] usb: raw-gadget: support stalling/halting/wedging endpoints
  • From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
• Re: [PATCH 1/5] usb: gadget: Introduce usb_request->is_last field
  • From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
• Re: WARNING in usbhid_raw_request/usb_submit_urb (3)
  • From: syzbot <syzbot+db339689b2101f6f6071@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: WARNING in usbhid_raw_request/usb_submit_urb (3)
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2] usb: raw-gadget: fix gadget endpoint selection
  • From: Andrey Konovalov <andreyknvl@xxxxxxxxxx>
• Re: [PATCH v5 1/4] dt-bindings: Add Broadcom STB USB support
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: WARNING in usbhid_raw_request/usb_submit_urb (3)
  • From: syzbot <syzbot+db339689b2101f6f6071@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 3/4] usb: ehci: Add new EHCI driver for Broadcom STB SoC's
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: WARNING in usbhid_raw_request/usb_submit_urb (3)
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH v5 0/4] Add XHCI, EHCI and OHCI support for Broadcom STB SoS's
  • From: Al Cooper <alcooperx@xxxxxxxxx>
• [PATCH v5 2/4] usb: xhci: xhci-plat: Add support for Broadcom STB SoC's
  • From: Al Cooper <alcooperx@xxxxxxxxx>
• [PATCH v5 4/4] usb: host: Add ability to build new Broadcom STB USB drivers
  • From: Al Cooper <alcooperx@xxxxxxxxx>
• [PATCH v5 3/4] usb: ehci: Add new EHCI driver for Broadcom STB SoC's
  • From: Al Cooper <alcooperx@xxxxxxxxx>
• [PATCH v5 1/4] dt-bindings: Add Broadcom STB USB support
  • From: Al Cooper <alcooperx@xxxxxxxxx>
• Re: ucsi and DRD controller interaction
  • From: "Shah, Nehal-bakulchandra" <nehal-bakulchandra.shah@xxxxxxx>
• Re: [PATCH v4 3/4] usb: ehci: Add new EHCI driver for Broadcom STB SoC's
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 02/10] drm: Add backlight helper
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• Re: [PATCH v7 0/4] ADD interconnect support for Qualcomm DWC3 driver
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH v2 10/14] arm64: dts: amlogic: use the new USB control driver for GXL and GXM
  • From: Kevin Hilman <khilman@xxxxxxxxxxxx>
• Re: [PATCH v4 0/4] Add XHCI, EHCI and OHCI support for Broadcom STB SoS's
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 3/4] usb: ehci: Add new EHCI driver for Broadcom STB SoC's
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 2/2] usb: serial: xr_serial: Add gpiochip support
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] usb: serial: xr_serial: Add gpiochip support
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• [PATCH v4 4/4] usb: host: Add ability to build new Broadcom STB USB drivers
  • From: Al Cooper <alcooperx@xxxxxxxxx>
• [PATCH v4 3/4] usb: ehci: Add new EHCI driver for Broadcom STB SoC's
  • From: Al Cooper <alcooperx@xxxxxxxxx>
• [PATCH v4 2/4] usb: xhci: xhci-plat: Add support for Broadcom STB SoC's
  • From: Al Cooper <alcooperx@xxxxxxxxx>
• [PATCH v4 1/4] dt-bindings: Add Broadcom STB USB support
  • From: Al Cooper <alcooperx@xxxxxxxxx>
• [PATCH v4 0/4] Add XHCI, EHCI and OHCI support for Broadcom STB SoS's
  • From: Al Cooper <alcooperx@xxxxxxxxx>
• Re: Adding tps65986 to your tps6598x driver
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: Recommended USB3/SuperSpeed gadget device
  • From: Felipe Balbi <balbi@xxxxxxxxxx>
• [PATCH v7 3/4] PCI: brcmstb: Wait for Raspberry Pi's firmware when present
  • From: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
• [PATCH v7 4/4] USB: pci-quirks: Add Raspberry Pi 4 quirk
  • From: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
• [PATCH v7 0/4] USB: pci-quirks: Add Raspberry Pi 4 quirk
  • From: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
• [PATCH v7 2/4] firmware: raspberrypi: Introduce vl805 init routine
  • From: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
• [PATCH v7 1/4] soc: bcm2835: Add notify xHCI reset property
  • From: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
• [PATCHv3] UAS: add quirk for LaCie 2Big Quadra
  • From: Oliver Neukum <oneukum@xxxxxxxx>