It doesn't need to enable/disable L1 on the fly for EP0 transfer,
we only need to enable L1 after SET_CONFIGURATION.
This code may be introduced by careless.
Cc: Pawel Laszczak <pawell@xxxxxxxxxxx>
Signed-off-by: Peter Chen <peter.chen@xxxxxxx>
---
drivers/usb/cdns3/ep0.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/drivers/usb/cdns3/ep0.c b/drivers/usb/cdns3/ep0.c
index a2b9af5a80cc..5104414ce243 100644
--- a/drivers/usb/cdns3/ep0.c
+++ b/drivers/usb/cdns3/ep0.c
@@ -122,8 +122,6 @@ static void cdns3_ep0_complete_setup(struct cdns3_device *priv_dev,
priv_dev->ep0_stage = CDNS3_SETUP_STAGE;
writel((send_erdy ? EP_CMD_ERDY : 0) | EP_CMD_REQ_CMPL,
&priv_dev->regs->ep_cmd);
-
- cdns3_allow_enable_l1(priv_dev, 1);
}
/**
@@ -639,7 +637,6 @@ void cdns3_check_ep0_interrupt_proceed(struct cdns3_device *priv_dev, int dir)
if (priv_dev->wait_for_setup && ep_sts_reg & EP_STS_IOC) {
priv_dev->wait_for_setup = 0;
- cdns3_allow_enable_l1(priv_dev, 0);
cdns3_ep0_setup_phase(priv_dev);
} else if ((ep_sts_reg & EP_STS_IOC) || (ep_sts_reg & EP_STS_ISP)) {
priv_dev->ep0_data_dir = dir;
--
2.17.1
