On 7/17/20 5:16 AM, jaap aarts wrote: > Adds fan/pwm support for H100i platinum. > Custom temp/fan curves are not supported, however > the presets found in the proprietary drivers are available. > > Signed-off-by: Jaap Aarts <jaap.aarts1@xxxxxxxxx> Most of my comments have not been addressed. Change log is missing. 0-day feedback has not been adressed. Guenter > --- > drivers/hwmon/Kconfig | 6 + > drivers/hwmon/Makefile | 1 + > drivers/hwmon/corsair_hydro_i_pro.c | 791 ++++++++++++++++++++++++++++ > 3 files changed, 798 insertions(+) > create mode 100644 drivers/hwmon/corsair_hydro_i_pro.c > > diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig > index 288ae9f63588..9831a40fb05f 100644 > --- a/drivers/hwmon/Kconfig > +++ b/drivers/hwmon/Kconfig > @@ -378,6 +378,12 @@ config SENSORS_ARM_SCPI > and power sensors available on ARM Ltd's SCP based platforms. The > actual number and type of sensors exported depend on the platform. > > +config SENSORS_CORSAIR_HYDRO_I_PRO > + tristate "Corsair hydro HXXXi pro driver" > + help > + If you say yes here you get support for the corsair hydro HXXXi pro > + range of devices. > + > config SENSORS_ASB100 > tristate "Asus ASB100 Bach" > depends on X86 && I2C > diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile > index 3e32c21f5efe..ec63294b3ef1 100644 > --- a/drivers/hwmon/Makefile > +++ b/drivers/hwmon/Makefile > @@ -20,6 +20,7 @@ obj-$(CONFIG_SENSORS_W83793) += w83793.o > obj-$(CONFIG_SENSORS_W83795) += w83795.o > obj-$(CONFIG_SENSORS_W83781D) += w83781d.o > obj-$(CONFIG_SENSORS_W83791D) += w83791d.o > +obj-$(CONFIG_SENSORS_CORSAIR_HYDRO_I_PRO) += corsair_hydro_i_pro.o > > obj-$(CONFIG_SENSORS_AB8500) += abx500.o ab8500.o > obj-$(CONFIG_SENSORS_ABITUGURU) += abituguru.o > diff --git a/drivers/hwmon/corsair_hydro_i_pro.c b/drivers/hwmon/corsair_hydro_i_pro.c > new file mode 100644 > index 000000000000..43bf52d8d365 > --- /dev/null > +++ b/drivers/hwmon/corsair_hydro_i_pro.c > @@ -0,0 +1,791 @@ > +// SPDX-License-Identifier: GPL-2.0-or-later > +/* > + * A hwmon driver for all corsair hyxro HXXXi pro all-in-one liquid coolers. > + * Copyright (c) Jaap Aarts 2020 > + * > + * Protocol reverse engineered by audiohacked > + * https://github.com/audiohacked/OpendriverLink > + */ > + > +/* > + * Supports following liquid coolers: > + * H100i platinum > + * > + * Other products should work with this driver but no testing has been done. > + * > + * Note: platinum is the codename name for pro within the driver, so H100i platinum = H100i pro. > + * But some products are actually calles platinum, these are not intended to be supported. > + * > + * Note: fan curve control has not been implemented > + */ > +#include <linux/errno.h> > +#include <linux/hwmon.h> > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/slab.h> > +#include <linux/usb.h> > + > +struct hydro_i_pro_device { > + struct usb_device *udev; > + > + unsigned char *bulk_out_buffer; > + char *bulk_in_buffer; > + size_t bulk_out_size; > + size_t bulk_in_size; > + char bulk_in_endpointAddr; > + char bulk_out_endpointAddr; > + > + struct usb_interface *interface; /* the interface for this device */ > + struct semaphore > + limit_sem; /* limiting the number of writes in progress */ > +}; > + > +struct curve_point { > + uint8_t temp; > + uint8_t pwm; > +}; > + > +struct hwmon_fan_data { > + char fan_channel; > + long fan_target; > + unsigned char fan_pwm_target; > + long mode; > + struct curve_point curve[7]; > +}; > + > +struct hwmon_data { > + struct hydro_i_pro_device *hdev; > + int channel_count; > + void **channel_data; > +}; > + > +struct curve_point quiet_curve[] = { > + { > + .temp = 0x1F, > + .pwm = 0x15, > + }, > + { > + .temp = 0x21, > + .pwm = 0x1E, > + }, > + { > + .temp = 0x24, > + .pwm = 0x25, > + }, > + { > + .temp = 0x27, > + .pwm = 0x2D, > + }, > + { > + .temp = 0x29, > + .pwm = 0x38, > + }, > + { > + .temp = 0x2C, > + .pwm = 0x4A, > + }, > + { > + .temp = 0x2F, > + .pwm = 0x64, > + }, > +}; > + > +struct curve_point balanced_curve[] = { > + { > + .temp = 0x1C, > + .pwm = 0x15, > + }, > + { > + .temp = 0x1E, > + .pwm = 0x1B, > + }, > + { > + .temp = 0x20, > + .pwm = 0x23, > + }, > + { > + .temp = 0x22, > + .pwm = 0x28, > + }, > + { > + .temp = 0x24, > + .pwm = 0x32, > + }, > + { > + .temp = 0x27, > + .pwm = 0x48, > + }, > + { > + .temp = 0x29, > + .pwm = 0x64, > + }, > +}; > + > +struct curve_point extreme_curve[] = { > + { > + .temp = 0x19, > + .pwm = 0x28, > + }, > + { > + .temp = 0x1B, > + .pwm = 0x2E, > + }, > + { > + .temp = 0x1D, > + .pwm = 0x37, > + }, > + { > + .temp = 0x1E, > + .pwm = 0x41, > + }, > + { > + .temp = 0x1F, > + .pwm = 0x4C, > + }, > + { > + .temp = 0x20, > + .pwm = 0x56, > + }, > + { > + .temp = 0x21, > + .pwm = 0x64, > + }, > +}; > + > +#define default_curve quiet_curve > + > +enum opcodes { > + PWM_FAN_CURVE_CMD = 0x40, > + PWM_GET_CURRENT_CMD = 0x41, > + PWM_FAN_TARGET_CMD = 0x42, > + RPM_FAN_TARGET_CMD = 0x43, > +}; > + > +#define SUCCES_LENGTH 3 > +#define SUCCES_CODE (0x12, 0x34) > +static const char SUCCESS[SUCCES_LENGTH - 1] = { 0x12, 0x34 }; > + > +static bool check_succes(enum opcodes command, char ret[SUCCES_LENGTH]) > +{ > + char success[SUCCES_LENGTH] = { command, SUCCES_CODE }; > + > + return strncmp(ret, success, SUCCES_LENGTH) == 0; > +} > + > +int set_fan_pwm_curve(struct hydro_i_pro_device *hdev, > + struct hwmon_fan_data *fan_data, > + struct curve_point point[7]) > +{ > + int retval; > + int wrote; > + int sndpipe = usb_sndbulkpipe(hdev->udev, hdev->bulk_out_endpointAddr); > + int rcvpipe = usb_rcvbulkpipe(hdev->udev, hdev->bulk_in_endpointAddr); > + unsigned char *send_buf = hdev->bulk_out_buffer; > + unsigned char *recv_buf = hdev->bulk_in_buffer; > + > + memcpy(fan_data->curve, point, sizeof(fan_data->curve)); > + > + send_buf[0] = PWM_FAN_CURVE_CMD; > + send_buf[1] = fan_data->fan_channel; > + send_buf[2] = point[0].temp; > + send_buf[3] = point[1].temp; > + send_buf[4] = point[2].temp; > + send_buf[5] = point[3].temp; > + send_buf[6] = point[4].temp; > + send_buf[7] = point[5].temp; > + send_buf[8] = point[6].temp; > + send_buf[9] = point[0].pwm; > + send_buf[10] = point[1].pwm; > + send_buf[11] = point[2].pwm; > + send_buf[12] = point[3].pwm; > + send_buf[13] = point[4].pwm; > + send_buf[14] = point[5].pwm; > + send_buf[15] = point[6].pwm; > + > + retval = usb_bulk_msg(hdev->udev, sndpipe, send_buf, 16, &wrote, 100); > + if (retval != 0) > + return retval; > + > + retval = usb_bulk_msg(hdev->udev, rcvpipe, recv_buf, 4, &wrote, 100); > + if (retval != 0) > + return retval; > + > + if (!check_succes(send_buf[0], recv_buf)) { > + dev_info(&hdev->udev->dev, > + "[*] failed setting fan curve %d,%d,%d/%d\n", > + recv_buf[0], recv_buf[1], recv_buf[2], recv_buf[3]); > + return -EINVAL; > + } > + return 0; > +} > + > +int set_fan_target_rpm(struct hydro_i_pro_device *hdev, > + struct hwmon_fan_data *fan_data, long val) > +{ > + int retval; > + int wrote; > + int sndpipe = usb_sndbulkpipe(hdev->udev, hdev->bulk_out_endpointAddr); > + int rcvpipe = usb_rcvbulkpipe(hdev->udev, hdev->bulk_in_endpointAddr); > + > + unsigned char *send_buf = hdev->bulk_out_buffer; > + unsigned char *recv_buf = hdev->bulk_in_buffer; > + > + fan_data->fan_target = val; > + fan_data->fan_pwm_target = 0; > + > + send_buf[0] = RPM_FAN_TARGET_CMD; > + send_buf[1] = fan_data->fan_channel; > + send_buf[2] = (fan_data->fan_target >> 8); > + send_buf[3] = fan_data->fan_target; > + > + retval = usb_bulk_msg(hdev->udev, sndpipe, send_buf, 4, &wrote, 100); > + if (retval != 0) > + return retval; > + > + retval = usb_bulk_msg(hdev->udev, rcvpipe, recv_buf, 6, &wrote, 100); > + if (retval != 0) > + return retval; > + > + if (!check_succes(send_buf[0], recv_buf)) { > + dev_info(&hdev->udev->dev, > + "[*] failed setting fan rpm %d,%d,%d/%d\n", > + recv_buf[0], recv_buf[1], recv_buf[2], recv_buf[3]); > + return -EINVAL; > + } > + return 0; > +} > + > +int get_fan_current_rpm(struct hydro_i_pro_device *hdev, > + struct hwmon_fan_data *fan_data, long *val) > +{ > + int retval; > + int wrote; > + int sndpipe = usb_sndbulkpipe(hdev->udev, hdev->bulk_out_endpointAddr); > + int rcvpipe = usb_rcvbulkpipe(hdev->udev, hdev->bulk_in_endpointAddr); > + > + unsigned char *send_buf = hdev->bulk_out_buffer; > + unsigned char *recv_buf = hdev->bulk_in_buffer; > + > + send_buf[0] = PWM_GET_CURRENT_CMD; > + send_buf[1] = fan_data->fan_channel; > + > + retval = usb_bulk_msg(hdev->udev, sndpipe, send_buf, 2, &wrote, 100); > + if (retval != 0) > + return retval; > + > + retval = usb_bulk_msg(hdev->udev, rcvpipe, recv_buf, 6, &wrote, 100); > + if (retval != 0) > + return retval; > + > + if (!check_succes(send_buf[0], recv_buf) || > + recv_buf[3] != fan_data->fan_channel) { > + dev_info(&hdev->udev->dev, > + "[*] failed retrieving fan rmp %d,%d,%d/%d\n", > + recv_buf[0], recv_buf[1], recv_buf[2], recv_buf[3]); > + return -EINVAL; > + } > + > + *val = ((recv_buf[4]) << 8) + recv_buf[5]; > + return 0; > +} > + > +int set_fan_target_pwm(struct hydro_i_pro_device *hdev, > + struct hwmon_fan_data *fan_data, long val) > +{ > + int retval; > + int wrote; > + int sndpipe = usb_sndbulkpipe(hdev->udev, hdev->bulk_out_endpointAddr); > + int rcvpipe = usb_rcvbulkpipe(hdev->udev, hdev->bulk_in_endpointAddr); > + > + unsigned char *send_buf = hdev->bulk_out_buffer; > + unsigned char *recv_buf = hdev->bulk_in_buffer; > + > + fan_data->fan_pwm_target = val; > + fan_data->fan_target = 0; > + > + send_buf[0] = PWM_FAN_TARGET_CMD; > + send_buf[1] = fan_data->fan_channel; > + send_buf[3] = fan_data->fan_pwm_target; > + > + retval = usb_bulk_msg(hdev->udev, sndpipe, send_buf, 4, &wrote, 100); > + if (retval != 0) > + return retval; > + > + retval = usb_bulk_msg(hdev->udev, rcvpipe, recv_buf, 6, &wrote, 100000); > + if (retval != 0) > + return retval; > + > + if (!check_succes(send_buf[0], recv_buf)) { > + dev_info(&hdev->udev->dev, > + "[*] failed setting fan pwm %d,%d,%d/%d\n", > + recv_buf[0], recv_buf[1], recv_buf[2], recv_buf[3]); > + return -EINVAL; > + } > + return 0; > +} > + > +umode_t hwmon_is_visible(const void *d, enum hwmon_sensor_types type, u32 attr, > + int channel) > +{ > + switch (type) { > + case hwmon_fan: > + switch (attr) { > + case hwmon_fan_input: > + return 0444; > + break; > + case hwmon_fan_target: > + return 0644; > + break; > + case hwmon_fan_min: > + return 0444; > + break; > + default: > + break; > + } > + break; > + case hwmon_pwm: > + switch (attr) { > + case hwmon_pwm_input: > + return 0200; > + break; > + case hwmon_pwm_enable: > + return 0644; > + break; > + default: > + break; > + } > + break; > + default: > + break; > + } > + return 0; > +} > + > +static int hwmon_write(struct device *dev, enum hwmon_sensor_types type, > + u32 attr, int channel, long val) > +{ > + struct hwmon_data *data = dev_get_drvdata(dev); > + struct hydro_i_pro_device *hdev = data->hdev; > + struct hwmon_fan_data *fan_data; > + int retval = 0; > + > + switch (type) { > + case hwmon_fan: > + switch (attr) { > + case hwmon_fan_target: > + fan_data = data->channel_data[channel]; > + if (fan_data->mode != 1) > + return -EINVAL; > + > + retval = usb_autopm_get_interface(hdev->interface); > + if (retval) > + goto exit; > + > + if (down_trylock(&hdev->limit_sem)) { > + retval = -EAGAIN; > + goto cleanup_interface; > + } > + > + retval = set_fan_target_rpm(hdev, fan_data, val); > + if (retval) > + goto cleanup; > + > + break; > + default: > + return -EINVAL; > + } > + goto exit; > + case hwmon_pwm: > + switch (attr) { > + case hwmon_pwm_input: > + fan_data = data->channel_data[channel]; > + if (fan_data->mode != 1) > + return -EINVAL; > + > + retval = usb_autopm_get_interface(hdev->interface); > + if (retval) > + goto exit; > + > + if (down_trylock(&hdev->limit_sem)) { > + retval = -EAGAIN; > + goto cleanup_interface; > + } > + > + retval = set_fan_target_pwm(hdev, fan_data, val); > + if (retval) > + goto cleanup; > + > + break; > + case hwmon_pwm_enable: > + fan_data = data->channel_data[channel]; > + > + retval = usb_autopm_get_interface(hdev->interface); > + if (retval) > + goto exit; > + > + if (down_trylock(&hdev->limit_sem)) { > + retval = -EAGAIN; > + goto cleanup_interface; > + } > + fan_data->mode = val; > + > + switch (val) { > + case 0: > + set_fan_pwm_curve(hdev, fan_data, > + default_curve); > + break; > + case 1: > + if (fan_data->fan_target != 0) { > + retval = set_fan_target_rpm( > + hdev, fan_data, > + fan_data->fan_target); > + if (retval) > + goto cleanup; > + } else if (fan_data->fan_pwm_target != 0) { > + retval = set_fan_target_pwm( > + hdev, fan_data, > + fan_data->fan_pwm_target); > + if (retval) > + goto cleanup; > + } > + break; > + case 2: > + set_fan_pwm_curve(hdev, fan_data, quiet_curve); > + break; > + case 3: > + set_fan_pwm_curve(hdev, fan_data, > + balanced_curve); > + break; > + case 4: > + set_fan_pwm_curve(hdev, fan_data, > + extreme_curve); > + break; > + } > + break; > + default: > + return -EINVAL; > + } > + goto exit; > + default: > + return -EINVAL; > + } > + > +cleanup: > + up(&hdev->limit_sem); > +cleanup_interface: > + usb_autopm_put_interface(hdev->interface); > +exit: > + return retval; > +} > + > +int hwmon_read(struct device *dev, enum hwmon_sensor_types type, u32 attr, > + int channel, long *val) > +{ > + struct hwmon_data *data = dev_get_drvdata(dev); > + struct hydro_i_pro_device *hdev = data->hdev; > + struct hwmon_fan_data *fan_data; > + int retval = 0; > + > + if (channel >= data->channel_count) > + return -EAGAIN; > + > + switch (type) { > + case hwmon_fan: > + switch (attr) { > + case hwmon_fan_input: > + fan_data = data->channel_data[channel]; > + > + retval = usb_autopm_get_interface(hdev->interface); > + if (retval) > + goto exit; > + > + if (down_trylock(&hdev->limit_sem)) { > + retval = -EAGAIN; > + goto cleanup_interface; > + } > + > + retval = get_fan_current_rpm(hdev, fan_data, val); > + if (retval) > + goto cleanup; > + > + goto cleanup; > + case hwmon_fan_target: > + fan_data = data->channel_data[channel]; > + if (fan_data->mode != 1) { > + *val = 0; > + goto exit; > + } > + *val = fan_data->fan_target; > + goto exit; > + case hwmon_fan_min: > + *val = 200; > + goto exit; > + > + default: > + return -EINVAL; > + } > + goto exit; > + > + case hwmon_pwm: > + switch (attr) { > + case hwmon_pwm_enable: > + fan_data = data->channel_data[channel]; > + *val = fan_data->mode; > + goto exit; > + default: > + return -EINVAL; > + } > + goto exit; > + > + default: > + return -EINVAL; > + } > + > +cleanup: > + up(&hdev->limit_sem); > +cleanup_interface: > + usb_autopm_put_interface(hdev->interface); > +exit: > + return retval; > +} > + > +#define fan_config (HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_MIN) > +#define pwm_config (HWMON_PWM_INPUT | HWMON_PWM_ENABLE) > + > +static const struct hwmon_ops i_pro_ops = { > + .is_visible = hwmon_is_visible, > + .read = hwmon_read, > + .write = hwmon_write, > +}; > + > +bool does_fan_exist(struct hydro_i_pro_device *hdev, int channel) > +{ > + int retval; > + int wrote; > + int sndpipe = usb_sndbulkpipe(hdev->udev, hdev->bulk_out_endpointAddr); > + int rcvpipe = usb_rcvbulkpipe(hdev->udev, hdev->bulk_in_endpointAddr); > + > + unsigned char *send_buf = hdev->bulk_out_buffer; > + unsigned char *recv_buf = hdev->bulk_in_buffer; > + > + send_buf[0] = RPM_FAN_TARGET_CMD; > + send_buf[1] = channel; > + send_buf[2] = (600 >> 8); > + send_buf[3] = (unsigned char)600; > + > + retval = usb_bulk_msg(hdev->udev, sndpipe, send_buf, 4, &wrote, 100); > + if (retval != 0) > + return false; > + > + retval = usb_bulk_msg(hdev->udev, rcvpipe, recv_buf, 6, &wrote, 100000); > + if (retval != 0) > + return false; > + > + if (!check_succes(send_buf[0], recv_buf)) > + return false; > + return true; > +} > + > +int get_fan_count(struct hydro_i_pro_device *hdev) > +{ > + int fan; > + > + for (fan = 0; does_fan_exist(hdev, fan); fan += 1) > + ; > + return fan; > +} > + > +void hwmon_init(struct hydro_i_pro_device *hdev) > +{ > + int fan_id; > + struct device *hwmon_dev; > + struct hwmon_fan_data *fan; > + struct hwmon_data *data = devm_kzalloc( > + &hdev->udev->dev, sizeof(struct hwmon_data), GFP_KERNEL); > + struct hwmon_chip_info *hwmon_info = devm_kzalloc( > + &hdev->udev->dev, sizeof(struct hwmon_chip_info), GFP_KERNEL); > + //Allocate the info table > + struct hwmon_channel_info **aio_info = > + devm_kzalloc(&hdev->udev->dev, > + sizeof(struct hwmon_channel_info *) * 2, > + GFP_KERNEL); //2 for each channel info. > + > + //Allocate the fan and PWM configuration > + u32 *fans_config = devm_kzalloc(&hdev->udev->dev, > + sizeof(u32) * (data->channel_count + 1), > + GFP_KERNEL); > + u32 *pwms_config = devm_kzalloc(&hdev->udev->dev, > + sizeof(u32) * (data->channel_count + 1), > + GFP_KERNEL); > + > + data->channel_count = get_fan_count(hdev); //amount of fans > + data->channel_data = > + devm_kzalloc(&hdev->udev->dev, > + sizeof(char *) * data->channel_count, GFP_KERNEL); > + > + //For each fan create a data channel a fan config entry and a pwm config entry > + for (fan_id = 0; fan_id <= data->channel_count; fan_id++) { > + fan = devm_kzalloc(&hdev->udev->dev, > + sizeof(struct hwmon_fan_data), GFP_KERNEL); > + fan->fan_channel = fan_id; > + fan->mode = 2; > + data->channel_data[fan_id] = fan; > + fans_config[fan_id] = fan_config; > + pwms_config[fan_id] = pwm_config; > + } > + fans_config[data->channel_count] = 0; > + pwms_config[data->channel_count] = 0; > + > + aio_info[0] = > + devm_kzalloc(&hdev->udev->dev, > + sizeof(struct hwmon_channel_info), GFP_KERNEL); > + aio_info[0]->type = hwmon_fan; > + aio_info[0]->config = fans_config; > + > + aio_info[1] = > + devm_kzalloc(&hdev->udev->dev, > + sizeof(struct hwmon_channel_info), GFP_KERNEL); > + aio_info[1]->type = hwmon_pwm; > + aio_info[1]->config = pwms_config; > + > + hwmon_info->ops = &i_pro_ops; > + hwmon_info->info = (const struct hwmon_channel_info **)aio_info; > + > + data->hdev = hdev; > + hwmon_dev = devm_hwmon_device_register_with_info( > + &hdev->udev->dev, "driver_fan", data, hwmon_info, NULL); > + dev_info(&hdev->udev->dev, "[*] Setup hwmon\n"); > +} > + > +/* > + * Devices that work with this driver. > + * More devices should work, however none have been tested. > + */ > +static const struct usb_device_id astk_table[] = { > + { USB_DEVICE(0x1b1c, 0x0c15) }, > + {}, > +}; > + > +MODULE_DEVICE_TABLE(usb, astk_table); > + > +int init_device(struct usb_device *udev) > +{ > + int retval; > + > + //This is needed because when running windows in a vm with proprietary driver > + //and you switch to this driver, the device will not respond unless you run this. > + retval = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x00, 0x40, > + 0xffff, 0x0000, 0, 0, 0); > + //this always returns error > + if (retval != 0) > + ; > + > + retval = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x02, 0x40, > + 0x0002, 0x0000, 0, 0, 0); > + return retval; > +} > + > +int deinit_device(struct usb_device *udev) > +{ > + return usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x02, 0x40, > + 0x0004, 0x0000, 0, 0, 0); > +} > + > +static void astk_delete(struct hydro_i_pro_device *hdev) > +{ > + usb_put_intf(hdev->interface); > + usb_put_dev(hdev->udev); > + kfree(hdev->bulk_in_buffer); > + kfree(hdev->bulk_out_buffer); > + kfree(hdev); > +} > + > +static int astk_probe(struct usb_interface *interface, > + const struct usb_device_id *id) > +{ > + struct hydro_i_pro_device *hdev; > + int retval; > + struct usb_endpoint_descriptor *bulk_in, *bulk_out; > + > + hdev = kzalloc(sizeof(*hdev), GFP_KERNEL); > + if (!hdev) { > + retval = -ENOMEM; > + goto exit; > + } > + > + retval = usb_find_common_endpoints(interface->cur_altsetting, &bulk_in, > + &bulk_out, NULL, NULL); > + if (retval != 0) > + goto exit; > + > + hdev->udev = usb_get_dev(interface_to_usbdev(interface)); > + hdev->interface = usb_get_intf(interface); > + > + /* set up the endpoint information */ > + /* use only the first bulk-in and bulk-out endpoints */ > + hdev->bulk_in_size = usb_endpoint_maxp(bulk_in); > + hdev->bulk_in_buffer = kmalloc(hdev->bulk_in_size, GFP_KERNEL); > + hdev->bulk_in_endpointAddr = bulk_in->bEndpointAddress; > + hdev->bulk_out_size = usb_endpoint_maxp(bulk_out); > + hdev->bulk_out_buffer = kmalloc(hdev->bulk_out_size, GFP_KERNEL); > + hdev->bulk_out_endpointAddr = bulk_out->bEndpointAddress; > + > + retval = init_device(hdev->udev); > + if (retval) { > + dev_err(&interface->dev, "failed initialising this device.\n"); > + goto exit; > + } > + > + hwmon_init(hdev); > + > + usb_set_intfdata(interface, hdev); > + sema_init(&hdev->limit_sem, 8); > +exit: > + return retval; > +} > + > +static void astk_disconnect(struct usb_interface *interface) > +{ > + struct hydro_i_pro_device *hdev = usb_get_intfdata(interface); > + > + dev_info(&hdev->udev->dev, "[*] DEINIT DEVICE\n"); > + usb_set_intfdata(interface, NULL); > + astk_delete(hdev); > + deinit_device(hdev->udev); > +} > +static int astk_resume(struct usb_interface *intf) > +{ > + return 0; > +} > + > +static int astk_suspend(struct usb_interface *intf, pm_message_t message) > +{ > + return 0; > +} > + > +static struct usb_driver hydro_i_pro_driver = { > + .name = "hydro_i_pro_device", > + .id_table = astk_table, > + .probe = astk_probe, > + .disconnect = astk_disconnect, > + .resume = astk_resume, > + .suspend = astk_suspend, > + .supports_autosuspend = 1, > +}; > + > +static int __init hydro_i_pro_init(void) > +{ > + return usb_register(&hydro_i_pro_driver); > +} > + > +static void __exit hydro_i_pro_exit(void) > +{ > + usb_deregister(&hydro_i_pro_driver); > +} > + > +module_init(hydro_i_pro_init); > +module_exit(hydro_i_pro_exit); > + > +MODULE_LICENSE("GPL"); > +MODULE_AUTHOR("Jaap Aarts <jaap.aarts1@xxxxxxxxx>"); > +MODULE_DESCRIPTION("Corsair HXXXi pro device driver"); >
