Re: [PATCH v2 4/7] usb: bdc: Adb shows offline after resuming from S2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 7/21/20 7:43 AM, Al Cooper wrote:
> On Android systems, After temporarily putting device to S2 by
> short pressing the power button on the remote, the display turns
> off. Then press the power button to turn the display back up. Adb
> devices would show the devices is offline. It needs a physical
> disconnect of the usb cable or power cycle to bring the device
> back online. The device is operational otherwise.
> 
> The problem is that during S2 resume, the ADB gadget driver could
> not link back with the BDC driver because the endpoint flags were
> cleared. The fix is to clear the endpoint flags for the disconnect
> case only and not for S2 exit.
> 
> Signed-off-by: Al Cooper <alcooperx@xxxxxxxxx>

Acked-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
-- 
Florian



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux