From: Cristian Birsan <cristian.birsan@xxxxxxxxxxxxx> This patch set adds usb device support for SAM9x60 SoC. The DPRAM memory for the USB High Speed Device Port (UDPHS) hardware block was increased and the allocation method is changed. This patch series simplifies the endpoint allocation scheme to acomodate this SoC and the old ones. Changes in v4: - rebase on top of testing/next - add pp variable to access pmc Changes in v3: - rebase on top of testing/next - depends on https://lore.kernel.org/linux-arm-kernel/cover.1594231056.git.mirq-linux@xxxxxxxxxxxx/ - extend usba_udc_config structure with endpoint preallocaion flag - collect acked-by tags Changes in v2: - drop the patch that adds reference to pmc for sam9x60 - use dt-bindings: usb prefix - enable usb device in device tree Claudiu Beznea (1): usb: gadget: udc: atmel: use of_find_matching_node_and_match Cristian Birsan (5): dt-bindings: usb: atmel: Update DT bindings documentation for sam9x60 usb: gadget: udc: atmel: simplify endpoint allocation usb: gadget: udc: atmel: use 1 bank endpoints for control transfers usb: gadget: udc: atmel: update endpoint allocation for sam9x60 ARM: dts: at91: sam9x60ek: enable usb device .../devicetree/bindings/usb/atmel-usb.txt | 1 + arch/arm/boot/dts/at91-sam9x60ek.dts | 13 ++++ arch/arm/boot/dts/sam9x60.dtsi | 14 ++++ drivers/usb/gadget/udc/atmel_usba_udc.c | 68 ++++++++++++------- drivers/usb/gadget/udc/atmel_usba_udc.h | 3 +- 5 files changed, 75 insertions(+), 24 deletions(-) -- 2.25.1
