Use the max sublink speed attributes reported in the gadget structure to write to the super-speed-plus BOS descriptor if available. Signed-off-by: Thinh Nguyen <thinhn@xxxxxxxxxxxx> --- drivers/usb/gadget/composite.c | 76 +++++++++++++++++++++++++++++------------- 1 file changed, 52 insertions(+), 24 deletions(-) diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index a231ae382ac3..d9fb29a72f94 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -729,45 +729,73 @@ static int bos_desc(struct usb_composite_dev *cdev) /* The SuperSpeedPlus USB Device Capability descriptor */ if (gadget_is_superspeed_plus(cdev->gadget)) { struct usb_ssp_cap_descriptor *ssp_cap; + unsigned int ssac = 1; + unsigned int ssic = 0; + unsigned int min_ssid = 0; + int i; + + if (cdev->gadget->ssac) { + ssac = cdev->gadget->ssac; + + /* + * Paired RX and TX sublink speed attributes share + * the same SSID. + */ + ssic = (ssac + 1) / 2 - 1; + min_ssid = cdev->gadget->min_speed_ssid; + } ssp_cap = cdev->req->buf + le16_to_cpu(bos->wTotalLength); bos->bNumDeviceCaps++; - /* - * Report typical values. - */ - - le16_add_cpu(&bos->wTotalLength, USB_DT_USB_SSP_CAP_SIZE(1)); - ssp_cap->bLength = USB_DT_USB_SSP_CAP_SIZE(1); + le16_add_cpu(&bos->wTotalLength, USB_DT_USB_SSP_CAP_SIZE(ssac)); + ssp_cap->bLength = USB_DT_USB_SSP_CAP_SIZE(ssac); ssp_cap->bDescriptorType = USB_DT_DEVICE_CAPABILITY; ssp_cap->bDevCapabilityType = USB_SSP_CAP_TYPE; ssp_cap->bReserved = 0; ssp_cap->wReserved = 0; ssp_cap->bmAttributes = - cpu_to_le32(FIELD_PREP(USB_SSP_SUBLINK_SPEED_ATTRIBS, 1) | - FIELD_PREP(USB_SSP_SUBLINK_SPEED_IDS, 0)); + cpu_to_le32(FIELD_PREP(USB_SSP_SUBLINK_SPEED_ATTRIBS, ssac) | + FIELD_PREP(USB_SSP_SUBLINK_SPEED_IDS, ssic)); ssp_cap->wFunctionalitySupport = - cpu_to_le16(FIELD_PREP(USB_SSP_MIN_SUBLINK_SPEED_ATTRIBUTE_ID, 0) | + cpu_to_le16(FIELD_PREP(USB_SSP_MIN_SUBLINK_SPEED_ATTRIBUTE_ID, min_ssid) | FIELD_PREP(USB_SSP_MIN_RX_LANE_COUNT, 1) | FIELD_PREP(USB_SSP_MIN_TX_LANE_COUNT, 1)); - ssp_cap->bmSublinkSpeedAttr[0] = - cpu_to_le32(FIELD_PREP(USB_SSP_SUBLINK_SPEED_SSID, 0) | - FIELD_PREP(USB_SSP_SUBLINK_SPEED_LSE, USB_LSE_GBPS) | - FIELD_PREP(USB_SSP_SUBLINK_SPEED_ST, - USB_ST_SYMMETRIC_RX) | - FIELD_PREP(USB_SSP_SUBLINK_SPEED_LP, USB_LP_SSP) | - FIELD_PREP(USB_SSP_SUBLINK_SPEED_LSM, 10)); - - ssp_cap->bmSublinkSpeedAttr[1] = - cpu_to_le32(FIELD_PREP(USB_SSP_SUBLINK_SPEED_SSID, 0) | - FIELD_PREP(USB_SSP_SUBLINK_SPEED_LSE, USB_LSE_GBPS) | - FIELD_PREP(USB_SSP_SUBLINK_SPEED_ST, - USB_ST_SYMMETRIC_TX) | - FIELD_PREP(USB_SSP_SUBLINK_SPEED_LP, USB_LP_SSP) | - FIELD_PREP(USB_SSP_SUBLINK_SPEED_LSM, 10)); + /* + * If the sublink speed attributes are not specified, then the + * default will be a pair symmetric RX/TX sublink speed + * attributes of 10 Gbps. + */ + for (i = 0; i < ssac + 1; i++) { + struct usb_sublink_speed default_ssa; + struct usb_sublink_speed *ptr; + + if (cdev->gadget->ssac) { + ptr = &cdev->gadget->sublink_speed[i]; + } else { + default_ssa.id = i / 2; + default_ssa.protocol = USB_LP_SSP; + default_ssa.exponent = USB_LSE_GBPS; + default_ssa.mantissa = 10; + + if (i % 2) + default_ssa.type = USB_ST_SYMMETRIC_TX; + else + default_ssa.type = USB_ST_SYMMETRIC_RX; + + ptr = &default_ssa; + } + + ssp_cap->bmSublinkSpeedAttr[i] = + cpu_to_le32(FIELD_PREP(USB_SSP_SUBLINK_SPEED_SSID, ptr->id) | + FIELD_PREP(USB_SSP_SUBLINK_SPEED_LSE, ptr->exponent) | + FIELD_PREP(USB_SSP_SUBLINK_SPEED_ST, ptr->type) | + FIELD_PREP(USB_SSP_SUBLINK_SPEED_LP, ptr->protocol) | + FIELD_PREP(USB_SSP_SUBLINK_SPEED_LSM, ptr->mantissa)); + } } return le16_to_cpu(bos->wTotalLength); -- 2.11.0