Linux SPI

• Thread Index

• Re: [PATCH v2 2/5] spi: spi-fsl-dspi: Exit the ISR with IRQ_NONE when it's not ours
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 0/1] Fix shared IRQ behavior in spi-fsl-dspi
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 2/5] spi: spi-fsl-dspi: Exit the ISR with IRQ_NONE when it's not ours
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: spi-fsl-dspi: Exit the ISR with IRQ_NONE when it's not ours" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH spi for-5.4 0/5] Deterministic SPI latency with NXP DSPI driver
  • From: Richard Cochran <richardcochran@xxxxxxxxx>
• [PATCH 1/1] spi: spi-fsl-dspi: Exit the ISR with IRQ_NONE when it's not ours
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH 0/1] Fix shared IRQ behavior in spi-fsl-dspi
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH v2 1/5] spi: spi-fsl-dspi: Reduce indentation level in dspi_interrupt
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH v2 3/5] spi: spi-fsl-dspi: Remove impossible to reach error check
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH v2 5/5] ARM: dts: ls1021a-tsn: Use the DSPI controller in poll mode
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH v2 4/5] spi: spi-fsl-dspi: Use poll mode in case the platform IRQ is missing
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH v2 2/5] spi: spi-fsl-dspi: Exit the ISR with IRQ_NONE when it's not ours
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH v2 0/5] Poll mode for NXP DSPI driver
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Applied "spi: fsl-qspi: Enhance binding to extend example for flash entry" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: spi-fsl-qspi: Add ls2080a compatibility string to bindings" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: Is there a "spimon" anywhere? Also spi flash data rate question
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [EXT] Re: [Patch v4 1/3] dt-bindings: spi: spi-fsl-qspi: Add ls2080a compatibility string to bindings
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [EXT] Re: [Patch v4 1/3] dt-bindings: spi: spi-fsl-qspi: Add ls2080a compatibility string to bindings
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH spi for-5.4 3/5] spi: spi-fsl-dspi: Use poll mode in case the platform IRQ is missing
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH spi for-5.4 2/5] spi: Add a PTP system timestamp to the transfer structure
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH spi for-5.4 0/5] Deterministic SPI latency with NXP DSPI driver
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Re: [PATCH spi for-5.4 0/5] Deterministic SPI latency with NXP DSPI driver
  • From: Richard Cochran <richardcochran@xxxxxxxxx>
• Re: [PATCH spi for-5.4 0/5] Deterministic SPI latency with NXP DSPI driver
  • From: Richard Cochran <richardcochran@xxxxxxxxx>
• Re: [PATCH spi for-5.4 0/5] Deterministic SPI latency with NXP DSPI driver
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Re: [PATCH spi for-5.4 0/5] Deterministic SPI latency with NXP DSPI driver
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH spi for-5.4 0/5] Deterministic SPI latency with NXP DSPI driver
  • From: Richard Cochran <richardcochran@xxxxxxxxx>
• RE: [EXT] Re: [Patch v4 1/3] dt-bindings: spi: spi-fsl-qspi: Add ls2080a compatibility string to bindings
  • From: Ashish Kumar <ashish.kumar@xxxxxxx>
• Re: [PATCH v2 1/2] dt-binding: spi: add NPCM FIU controller
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH spi for-5.4 0/5] Deterministic SPI latency with NXP DSPI driver
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: fsl: dspi: Add fsl,ls1088a-dspi compatible string
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 00/10] Raspberry Pi SPI speedups
  • From: kernel@xxxxxxxxxxxxxxxx
• RE: [EXT] Re: [Patch v4 1/3] dt-bindings: spi: spi-fsl-qspi: Add ls2080a compatibility string to bindings
  • From: Ashish Kumar <ashish.kumar@xxxxxxx>
• Re: [PATCH spi for-5.4 0/5] Deterministic SPI latency with NXP DSPI driver
  • From: Richard Cochran <richardcochran@xxxxxxxxx>
• Re: [Patch v4 1/3] dt-bindings: spi: spi-fsl-qspi: Add ls2080a compatibility string to bindings
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH spi for-5.4 1/5] spi: Use an abbreviated pointer to ctlr->cur_msg in __spi_pump_messages
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH spi for-5.4 13/14] spi: spi-fsl-dspi: Reduce indentation level in dspi_interrupt
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH spi for-5.4 0/5] Deterministic SPI latency with NXP DSPI driver
  • From: Richard Cochran <richardcochran@xxxxxxxxx>
• Re: [PATCH spi for-5.4 0/5] Deterministic SPI latency with NXP DSPI driver
  • From: Richard Cochran <richardcochran@xxxxxxxxx>
• Re: [PATCH spi for-5.4 13/14] spi: spi-fsl-dspi: Reduce indentation level in dspi_interrupt
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Re: [PATCH spi for-5.4 13/14] spi: spi-fsl-dspi: Reduce indentation level in dspi_interrupt
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Is there a "spimon" anywhere? Also spi flash data rate question
  • From: Daniel Santos <daniel@xxxxxxx>
• Re: [PATCH spi for-5.4 1/5] spi: Use an abbreviated pointer to ctlr->cur_msg in __spi_pump_messages
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Re: [PATCH spi for-5.4 1/5] spi: Use an abbreviated pointer to ctlr->cur_msg in __spi_pump_messages
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH spi for-5.4 0/5] Deterministic SPI latency with NXP DSPI driver
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [RFC PATCH net-next 03/11] spi: Add a PTP system timestamp to the transfer structure
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH spi for-5.4 0/5] Deterministic SPI latency with NXP DSPI driver
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Re: [RFC PATCH net-next 03/11] spi: Add a PTP system timestamp to the transfer structure
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Applied "spi: spi-fsl-dspi: Fix code alignment" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: spi-fsl-dspi: Replace legacy spi_master names with spi_controller" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: spi-fsl-dspi: Remove pointless assignment of master->transfer to NULL" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: spi-fsl-dspi: Use reverse Christmas tree declaration order" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: spi-fsl-dspi: Reduce indentation in dspi_release_dma()" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: spi-fsl-dspi: Change usage pattern of SPI_MCR_* and SPI_CTAR_* macros" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: spi-fsl-dspi: Remove unused defines and includes" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: spi-fsl-dspi: Use BIT() and GENMASK() macros" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: spi-fsl-dspi: Demistify magic value in SPI_SR_CLEAR" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: spi-fsl-dspi: Remove unused initialization of 'ret' in dspi_probe" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: spi-fsl-dspi: Move dspi_interrupt above dspi_transfer_one_message" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: spi-fsl-dspi: Fix typos" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH spi for-5.4 13/14] spi: spi-fsl-dspi: Reduce indentation level in dspi_interrupt
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH spi for-5.4 14/14] spi: spi-fsl-dspi: Remove impossible to reach error check
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [RFC PATCH net-next 03/11] spi: Add a PTP system timestamp to the transfer structure
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: zynq-qspi: Fix missing spi_unregister_controller when unload module" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: Fix the number of CS lines documented as an example" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: spi: Fix the number of CS lines documented as an example
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] dt-bindings: spi: Fix the number of CS lines documented as an example
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH] spi: pxa2xx: restore lpss state after resume
  • From: Curtis Malainey <cujomalainey@xxxxxxxxxx>
• Re: [PATCH 00/10] Raspberry Pi SPI speedups
  • From: Stefan Wahren <wahrenst@xxxxxxx>
• Re: [PATCH 05/10] spi: bcm2835: Work around DONE bit erratum
  • From: Stefan Wahren <wahrenst@xxxxxxx>
• Re: [PATCH spi for-5.4 00/14] NXP DSPI driver cleanup
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Re: [PATCH spi for-5.4 00/14] NXP DSPI driver cleanup
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: zynq-qspi: Fix missing spi_unregister_controller when unload module
  • From: Michal Simek <michal.simek@xxxxxxxxxx>
• Re: [PATCH] spi: pxa2xx: restore lpss state after resume
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [RFC PATCH net-next 03/11] spi: Add a PTP system timestamp to the transfer structure
  • From: Andrew Lunn <andrew@xxxxxxx>
• [PATCH spi for-5.4 2/5] spi: Add a PTP system timestamp to the transfer structure
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH spi for-5.4 5/5] spi: spi-fsl-dspi: Disable interrupts and preemption during poll mode transfer
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH spi for-5.4 3/5] spi: spi-fsl-dspi: Use poll mode in case the platform IRQ is missing
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH spi for-5.4 4/5] spi: spi-fsl-dspi: Implement the PTP system timestamping for TCFQ mode
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH spi for-5.4 0/5] Deterministic SPI latency with NXP DSPI driver
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH spi for-5.4 1/5] spi: Use an abbreviated pointer to ctlr->cur_msg in __spi_pump_messages
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH spi for-5.4 14/14] spi: spi-fsl-dspi: Remove impossible to reach error check
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH spi for-5.4 13/14] spi: spi-fsl-dspi: Reduce indentation level in dspi_interrupt
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH spi for-5.4 12/14] spi: spi-fsl-dspi: Move dspi_interrupt above dspi_transfer_one_message
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH spi for-5.4 11/14] spi: spi-fsl-dspi: Fix typos
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH spi for-5.4 09/14] spi: spi-fsl-dspi: Replace legacy spi_master names with spi_controller
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH spi for-5.4 10/14] spi: spi-fsl-dspi: Use reverse Christmas tree declaration order
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH spi for-5.4 08/14] spi: spi-fsl-dspi: Remove pointless assignment of master->transfer to NULL
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH spi for-5.4 07/14] spi: spi-fsl-dspi: Remove unused initialization of 'ret' in dspi_probe
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH spi for-5.4 06/14] spi: spi-fsl-dspi: Reduce indentation in dspi_release_dma()
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH spi for-5.4 05/14] spi: spi-fsl-dspi: Change usage pattern of SPI_MCR_* and SPI_CTAR_* macros
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH spi for-5.4 04/14] spi: spi-fsl-dspi: Demistify magic value in SPI_SR_CLEAR
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH spi for-5.4 01/14] spi: spi-fsl-dspi: Fix code alignment
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH spi for-5.4 03/14] spi: spi-fsl-dspi: Use BIT() and GENMASK() macros
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH spi for-5.4 02/14] spi: spi-fsl-dspi: Remove unused defines and includes
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH spi for-5.4 00/14] NXP DSPI driver cleanup
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH] spi: zynq-qspi: Fix missing spi_unregister_controller when unload module
  • From: Axel Lin <axel.lin@xxxxxxxxxx>
• Re: [RFC PATCH net-next 04/11] spi: spi-fsl-dspi: Cosmetic cleanup
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH] spi: pxa2xx: restore lpss state after resume
  • From: Curtis Malainey <cujomalainey@xxxxxxxxxxxx>
• Re: [PATCH] gpio: of: fix Freescale SPI CS quirk handling
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] gpio: of: fix Freescale SPI CS quirk handling
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: [RFC PATCH net-next 03/11] spi: Add a PTP system timestamp to the transfer structure
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Re: [RFC PATCH net-next 04/11] spi: spi-fsl-dspi: Cosmetic cleanup
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [RFC PATCH net-next 03/11] spi: Add a PTP system timestamp to the transfer structure
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [RFC PATCH net-next 04/11] spi: spi-fsl-dspi: Cosmetic cleanup
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Re: [RFC PATCH net-next 03/11] spi: Add a PTP system timestamp to the transfer structure
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Re: [RFC PATCH net-next 04/11] spi: spi-fsl-dspi: Cosmetic cleanup
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [RFC PATCH net-next 03/11] spi: Add a PTP system timestamp to the transfer structure
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [RFC PATCH net-next 02/11] net: dsa: sja1105: Implement the .gettimex64 system call for PTP
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [RFC PATCH net-next 06/11] spi: spi-fsl-dspi: Implement the PTP system timestamping
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [RFC PATCH net-next 08/11] spi: spi-fsl-dspi: Disable interrupts and preemption during poll mode transfer
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [RFC PATCH net-next 09/11] ARM: dts: ls1021a-tsn: Add debugging GPIOs for the SJA1105 and DSPI drivers
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [RFC PATCH net-next 10/11] ARM: dts: ls1021a-tsn: Use the DSPI controller in poll mode
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [RFC PATCH net-next 11/11] ARM: dts: ls1021a-tsn: Reduce the SJA1105 SPI frequency for debug
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [RFC PATCH net-next 07/11] spi: spi-fsl-dspi: Add a debugging GPIO for monitoring latency
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [RFC PATCH net-next 04/11] spi: spi-fsl-dspi: Cosmetic cleanup
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [RFC PATCH net-next 05/11] spi: spi-fsl-dspi: Use poll mode in case the platform IRQ is missing
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [RFC PATCH net-next 03/11] spi: Add a PTP system timestamp to the transfer structure
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [RFC PATCH net-next 00/11] Deterministic SPI latency on NXP
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [RFC PATCH net-next 01/11] net: dsa: sja1105: Add a debugging GPIO for monitoring SPI latency
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• [PATCH AUTOSEL 5.2 024/123] spi: pxa2xx: Balance runtime PM enable/disable on error
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.2 074/123] spi: pxa2xx: Add support for Intel Tiger Lake
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH 0/9] dt-bindings: first tentative of conversion to yaml format
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH 1/2] DTS: ARM: gta04: define chosen/stdout-path
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [Patch v4 3/3] dt-bindings: Enhance binding to extend example for flash entry
  • From: Ashish Kumar <Ashish.Kumar@xxxxxxx>
• [Patch v4 1/3] dt-bindings: spi: spi-fsl-qspi: Add ls2080a compatibility string to bindings
  • From: Ashish Kumar <Ashish.Kumar@xxxxxxx>
• [Patch v4 2/3] dt-bindings: spi: spi-fsl-qspi: Add bindings of ls1088a and ls1012a
  • From: Ashish Kumar <Ashish.Kumar@xxxxxxx>
• Re: [PATCH v4] spi: bcm2835: Convert to use CS GPIO descriptors
  • From: Stefan Wahren <stefan.wahren@xxxxxxxx>
• Applied "spi: dw-pci: Add support for Intel Elkhart Lake PSE SPI" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 07/16] spi: remove w90x900 driver
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 07/16] spi: remove w90x900 driver
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] spi: dw-pci: Add support for Intel Elkhart Lake PSE SPI
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH 05/10] spi: bcm2835: Work around DONE bit erratum
  • From: Eric Anholt <eric@xxxxxxxxxx>
• Re: [PATCH 05/10] spi: bcm2835: Work around DONE bit erratum
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH 00/10] Raspberry Pi SPI speedups
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH 00/10] Raspberry Pi SPI speedups
  • From: Stefan Wahren <wahrenst@xxxxxxx>
• Re: [PATCH 05/10] spi: bcm2835: Work around DONE bit erratum
  • From: Stefan Wahren <wahrenst@xxxxxxx>
• Re: [PATCH 00/16] ARM: remove ks8695 and w90x900 platforms
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 00/16] ARM: remove ks8695 and w90x900 platforms
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 07/16] spi: remove w90x900 driver
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v2 2/2] spi: npcm-fiu: add NPCM FIU controller driver
  • From: Benjamin Fair <benjaminfair@xxxxxxxxxx>
• Re: [PATCH v2 2/2] spi: npcm-fiu: add NPCM FIU controller driver
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] spi: npcm-fiu: add NPCM FIU controller driver
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
• Re: [PATCH 07/22] ARM: omap1: move perseus spi pinconf to board file
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 07/22] ARM: omap1: move perseus spi pinconf to board file
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 07/22] ARM: omap1: move perseus spi pinconf to board file
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH 07/22] ARM: omap1: move perseus spi pinconf to board file
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Applied "spi: Rename of_spi_register_master() function" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 2/2] spi: npcm-fiu: add NPCM FIU controller driver
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 2/2] spi: npcm-fiu: add NPCM FIU controller driver
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
• [PATCH] spi: Rename of_spi_register_master() function
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2 2/2] spi: npcm-fiu: add NPCM FIU controller driver
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH v2 1/2] dt-binding: spi: add NPCM FIU controller
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• [PATCH v2 0/2] spi: add NPCM FIU controller driver
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• [PATCH v2 2/2] spi: npcm-fiu: add NPCM FIU controller driver
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• Re: [PATCH 09/10] dmaengine: bcm2835: Avoid accessing memory when copying zeroes
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH 08/10] dmaengine: bcm2835: Document struct bcm2835_dmadev
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH 01/10] dmaengine: bcm2835: Allow reusable descriptors
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH 02/10] dmaengine: bcm2835: Allow cyclic transactions without interrupt
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH 3/9] dt-bindings: spi: meson: convert to yaml
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [PATCH 0/9] dt-bindings: first tentative of conversion to yaml format
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• Re: [PATCH v6 41/57] spi: Remove dev_err() usage after platform_get_irq()
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Applied "spi: bcm-qspi: Fix BSPI QUAD and DUAL mode support when using flex mode" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: sh-msiof: Use devm_platform_ioremap_resource() helper" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] spi: sh-msiof: Use devm_platform_ioremap_resource() helper
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• Re: [PATCH v1 1/1] spi: bcm-qspi: Make BSPI default mode
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH v1 1/1] spi: bcm-qspi: Make BSPI default mode
  • From: Rayagonda Kokatanur <rayagonda.kokatanur@xxxxxxxxxxxx>
• [PATCH v1 1/1] spi: bcm-qspi: Fix BSPI QUAD and DUAL mode support when using flex mode
  • From: Rayagonda Kokatanur <rayagonda.kokatanur@xxxxxxxxxxxx>
• Re: [RFCv2 0/9] dt-bindings: first tentative of conversion to yaml format
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH v17 1/2] spi: Add Renesas R-Car Gen3 RPC-IF SPI controller driver
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• [PATCH v17 2/2] dt-bindings: spi: Document Renesas R-Car Gen3 RPC-IF controller bindings
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• [PATCH v17 0/2] spi: Add Renesas R-Car Gen3 RPC-IF SPI driver
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• Re: [RFCv2 0/9] dt-bindings: first tentative of conversion to yaml format
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [RFCv2 3/9] dt-bindings: spi: meson: convert to yaml
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [GIT PULL] SPI fixes for v5.3
  • From: pr-tracker-bot@xxxxxxxxxx
• [GIT PULL] SPI fixes for v5.3
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [RFCv2 3/9] dt-bindings: spi: meson: convert to yaml
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [RFCv2 0/9] dt-bindings: first tentative of conversion to yaml format
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• Re: [PATCH 2/2] DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v16 1/2] spi: Add Renesas R-Car Gen3 RPC-IF SPI controller driver
  • From: masonccyang@xxxxxxxxxxx
• [PATCH v4] spi: bcm2835: Convert to use CS GPIO descriptors
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH v2] spi: fsl: Convert to use CS GPIO descriptors
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 00/10] Raspberry Pi SPI speedups
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• [PATCH 10/10] spi: bcm2835: Speed up RX-only DMA transfers by zero-filling TX FIFO
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• [PATCH 09/10] dmaengine: bcm2835: Avoid accessing memory when copying zeroes
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• [PATCH 08/10] dmaengine: bcm2835: Document struct bcm2835_dmadev
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• [PATCH 03/10] spi: Guarantee cacheline alignment of driver-private data
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• [PATCH 07/10] spi: bcm2835: Speed up TX-only DMA transfers by clearing RX FIFO
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• [PATCH 06/10] spi: bcm2835: Cache CS register value for ->prepare_message()
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• [PATCH 05/10] spi: bcm2835: Work around DONE bit erratum
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• [PATCH 04/10] spi: bcm2835: Drop dma_pending flag
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• [PATCH 01/10] dmaengine: bcm2835: Allow reusable descriptors
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• [PATCH 02/10] dmaengine: bcm2835: Allow cyclic transactions without interrupt
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• [PATCH 00/10] Raspberry Pi SPI speedups
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH v16 1/2] spi: Add Renesas R-Car Gen3 RPC-IF SPI controller driver
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Applied "spi: Reduce kthread priority" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: Remove dev_err() usage after platform_get_irq()" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: pxa2xx: Add support for Intel Tiger Lake" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: atmel: add tracing to custom .transfer_one_message callback
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [RFC PATCH] spi: tle620x: remove stale driver
  • From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
• Re: [PATCH] spi: atmel: add tracing to custom .transfer_one_message callback
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• Re: [PATCH] spi: atmel: add tracing to custom .transfer_one_message callback
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] spi: atmel: add tracing to custom .transfer_one_message callback
  • From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 5/5] spi: Reduce kthread priority
  • From: Doug Anderson <dianders@xxxxxxxxxx>
• Re: [RFC 0/9] dt-bindings: first tentative of conversion to yaml format
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [RFC 3/9] dt-bindings: spi: meson: convert to yaml
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• [PATCH v1 2/2] spi: npcm-fiu: add NPCM FIU controller driver
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• [PATCH v1 0/2] spi: add NPCM FIU controller driver
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• [PATCH v1 1/2] dt-binding: spi: add NPCM FIU controller
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• [RFC 3/9] dt-bindings: spi: meson: convert to yaml
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [RFC 0/9] dt-bindings: first tentative of conversion to yaml format
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [PATCH] spi: pxa2xx: Add support for Intel Tiger Lake
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Applied "spi: core: Use DEVICE_ATTR_RW() for SPI slave control sysfs attribute" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 3/3][V4] dt-bindings: iio: imu: add bindings for ADIS16460
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH 5/5] spi: Reduce kthread priority
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v3 5/7] drivers: Introduce device lookup variants by ACPI_COMPANION device
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v3 5/7] drivers: Introduce device lookup variants by ACPI_COMPANION device
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 5/5] spi: Reduce kthread priority
  • From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
• Re: [PATCH 5/5] spi: Reduce kthread priority
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 5/5] spi: Reduce kthread priority
  • From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
• Re: [PATCH v3 5/7] drivers: Introduce device lookup variants by ACPI_COMPANION device
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 5/5] spi: Reduce kthread priority
  • From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
• Re: [PATCH v3 5/7] drivers: Introduce device lookup variants by ACPI_COMPANION device
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 5/5] spi: Reduce kthread priority
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 5/5] spi: Reduce kthread priority
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• Re: [PATCH 5/5] spi: Reduce kthread priority
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH 5/5] spi: Reduce kthread priority
  • From: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
• [PATCH 2/3] arm64: dts: ls1088a: Add the DSPI controller node
  • From: Chuanhua Han <chuanhua.han@xxxxxxx>
• [PATCH 3/3] arm64: dts: ls1088a-qds: Add the spi-flash nodes under the DSPI controller
  • From: Chuanhua Han <chuanhua.han@xxxxxxx>
• [PATCH 1/3] dt-bindings: fsl: dspi: Add fsl,ls1088a-dspi compatible string
  • From: Chuanhua Han <chuanhua.han@xxxxxxx>
• Re: [RFC v1 0/3] *spi-mem: adding setup and callback function
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• Re: [PATCH 0/6] ReST conversion patches not applied yet
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 0/6] ReST conversion patches not applied yet
  • From: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
• Re: [PATCH 0/6] ReST conversion patches not applied yet
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 0/6] ReST conversion patches not applied yet
  • From: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
• Re: [PATCH 0/6] ReST conversion patches not applied yet
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 0/6] ReST conversion patches not applied yet
  • From: Jonathan Corbet <corbet@xxxxxxx>
• [PATCH 3/6] spi: docs: convert to ReST and add it to the kABI bookset
  • From: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
• [PATCH 0/6] ReST conversion patches not applied yet
  • From: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
• [PATCH] spi: core: Use DEVICE_ATTR_RW() for SPI slave control sysfs attribute
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH v16 2/2] dt-bindings: spi: Document Renesas R-Car Gen3 RPC-IF controller bindings
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• [PATCH v16 1/2] spi: Add Renesas R-Car Gen3 RPC-IF SPI controller driver
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• [PATCH v16 0/2] spi: Add Renesas R-Car Gen3 RPC-IF SPI driver
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• [PATCH v6 41/57] spi: Remove dev_err() usage after platform_get_irq()
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [RFC v1 0/3] *spi-mem: adding setup and callback function
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
• Re: [RFC v1 0/3] *spi-mem: adding setup and callback function
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• Re: [RFC v1 0/3] *spi-mem: adding setup and callback function
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/7] drivers: Introduce device lookup variants by of_node
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC v1 0/3] *spi-mem: adding setup and callback function
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
• Re: [PATCH 3/3][V4] dt-bindings: iio: imu: add bindings for ADIS16460
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [RFC v1 0/3] *spi-mem: adding setup and callback function
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
• [RFC v1 1/3] spi: spi-mem: add spi-mem setup function
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• [RFC v1 0/3] *spi-mem: adding setup and callback function
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• [RFC v1 2/3] spi: spi-mem: add callback function to spi-mem device
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• [RFC v1 3/3] mtd: m25p80: add get Flash size callback support
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• Re: [RFC PATCH] spi: tle620x: remove stale driver
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v15 2/2] dt-bindings: spi: Document Renesas R-Car Gen3 RPC-IF controller bindings
  • From: masonccyang@xxxxxxxxxxx
• Re: [PATCH v15 2/2] dt-bindings: spi: Document Renesas R-Car Gen3 RPC-IF controller bindings
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v15 2/2] dt-bindings: spi: Document Renesas R-Car Gen3 RPC-IF controller bindings
  • From: masonccyang@xxxxxxxxxxx
• Re: [PATCH v15 2/2] dt-bindings: spi: Document Renesas R-Car Gen3 RPC-IF controller bindings
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [RFC PATCH] spi: tle620x: remove stale driver
  • From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
• Re: [PATCH 3/3][V4] dt-bindings: iio: imu: add bindings for ADIS16460
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/3][V4] iio: imu: Add support for the ADIS16460 IMU
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3][V4] iio: imu: adis: Add support for SPI transfer cs_change_delay
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 5/7] drivers: Introduce device lookup variants by ACPI_COMPANION device
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v3 5/7] drivers: Introduce device lookup variants by ACPI_COMPANION device
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v3 2/7] drivers: Introduce device lookup variants by of_node
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH 5.2 49/66] Revert "gpio/spi: Fix spi-gpio regression on active high CS"
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 00/26] ReST conversion of text files without .txt extension
  • From: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
• [PATCH v2 06/26] docs: i2c: convert to ReST and add to driver-api bookset
  • From: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
• [PATCH v2 00/26] ReST conversion of text files without .txt extension
  • From: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
• [PATCH v2 08/26] spi: docs: convert to ReST and add it to the kABI bookset
  • From: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
• Applied "spi: sprd: adi: Add a reset reason for factory test mode" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: sprd: adi: Change hwlock to be optional" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: sprd: adi: Add a reset reason for TOS panic" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: sprd: adi: Add a reset reason for watchdog mode" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: sprd: Change the hwlock support to be optional" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: sprd: adi: Remove redundant address bits setting" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 6/6] dt-bindings: spi: sprd: Change the hwlock support to be optional
  • From: Baolin Wang <baolin.wang@xxxxxxxxxx>
• Re: [PATCH 6/6] dt-bindings: spi: sprd: Change the hwlock support to be optional
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH 4/6] spi: sprd: adi: Add a reset reason for watchdog mode
  • From: Baolin Wang <baolin.wang@xxxxxxxxxx>
• [PATCH 6/6] dt-bindings: spi: sprd: Change the hwlock support to be optional
  • From: Baolin Wang <baolin.wang@xxxxxxxxxx>
• [PATCH 5/6] spi: sprd: adi: Change hwlock to be optional
  • From: Baolin Wang <baolin.wang@xxxxxxxxxx>
• [PATCH 3/6] spi: sprd: adi: Add a reset reason for factory test mode
  • From: Baolin Wang <baolin.wang@xxxxxxxxxx>
• [PATCH 2/6] spi: sprd: adi: Add a reset reason for TOS panic
  • From: Baolin Wang <baolin.wang@xxxxxxxxxx>
• [PATCH 1/6] spi: sprd: adi: Remove redundant address bits setting
  • From: Baolin Wang <baolin.wang@xxxxxxxxxx>
• [PATCH 0/6] Optimize Spreadtrum ADI driver
  • From: Baolin Wang <baolin.wang@xxxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH v15 1/2] spi: Add Renesas R-Car Gen3 RPC-IF SPI controller driver
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• [PATCH v15 0/2] spi: Add Renesas R-Car Gen3 RPC-IF SPI driver
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• [PATCH v15 2/2] dt-bindings: spi: Document Renesas R-Car Gen3 RPC-IF controller bindings
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• Re: [PATCH 2/2] DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 2/7] drivers: Introduce device lookup variants by of_node
  • From: Moritz Fischer <mdf@xxxxxxxxxx>
• Re: [PATCH v3 2/7] drivers: Introduce device lookup variants by of_node
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v3 2/7] drivers: Introduce device lookup variants by of_node
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 2/2] DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again
  • From: Rob Herring <robh@xxxxxxxxxx>
• Applied "spi: dw-pci: Use dev_get_drvdata" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] spi: dw-pci: Use dev_get_drvdata
  • From: Chuhong Yuan <hslester96@xxxxxxxxx>
• Re: [PATCH for-5.3] spi: bcm2835: Fix 3-wire mode if DMA is enabled
  • From: Stefan Wahren <wahrenst@xxxxxxx>
• RE: [PATCH v5 12/15] ARM: dts: imx6ul: add dma support on ecspi
  • From: Robin Gong <yibin.gong@xxxxxxx>
• Re: [PATCH v5 12/15] ARM: dts: imx6ul: add dma support on ecspi
  • From: Shawn Guo <shawnguo@xxxxxxxxxx>
• [PATCH v3 2/7] drivers: Introduce device lookup variants by of_node
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• [PATCH v3 5/7] drivers: Introduce device lookup variants by ACPI_COMPANION device
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• RE: [PATCH v5 12/15] ARM: dts: imx6ul: add dma support on ecspi
  • From: Robin Gong <yibin.gong@xxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH 2/3][V4] iio: imu: Add support for the ADIS16460 IMU
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 3/3][V4] dt-bindings: iio: imu: add bindings for ADIS16460
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 0/3][V4] iio: imu: Add support for the ADIS16460 IMU
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 1/3][V4] iio: imu: adis: Add support for SPI transfer cs_change_delay
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Re: [PATCH 1/4][V3] spi: Add optional stall delay between cs_change transfers
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH 1/4][V3] spi: Add optional stall delay between cs_change transfers
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 04/22] docs: spi: convert to ReST and add it to the kABI bookset
  • From: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
• Re: [PATCH 04/22] docs: spi: convert to ReST and add it to the kABI bookset
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 04/22] docs: spi: convert to ReST and add it to the kABI bookset
  • From: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH 0/4][V3] iio: imu: Add support for the ADIS16460 IMU
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 4/4][V3] dt-bindings: iio: imu: add bindings for ADIS16460
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 3/4][V3] iio: imu: Add support for the ADIS16460 IMU
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 2/4][V3] iio: imu: adis: Add support for SPI transfer cs_change_delay
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 1/4][V3] spi: Add optional stall delay between cs_change transfers
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Patchwork summary for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• Applied "spi: pxa2xx: Balance runtime PM enable/disable on error" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: dw-mmio: Use devm_platform_ioremap_resource()" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: dw-mmio: Clock should be shut when error occurs" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 04/22] docs: spi: convert to ReST and add it to the kABI bookset
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH 02/22] docs: i2c: convert to ReST and add to driver-api bookset
  • From: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
• [PATCH 04/22] docs: spi: convert to ReST and add it to the kABI bookset
  • From: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
• [PATCH 00/22] ReST conversion of text files without .txt extension
  • From: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
• Re: [PATCH 4/4][V2] dt-bindings: iio: imu: add bindings for ADIS16460
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• [PATCH] spi: pxa2xx: Balance runtime PM enable/disable on error
  • From: Lubomir Rintel <lkundrak@xxxxx>
• Re: [PATCH v14 2/2] dt-bindings: spi: Document Renesas R-Car Gen3 RPC-IF controller bindings
  • From: masonccyang@xxxxxxxxxxx
• Re: [PATCH] dt-bindings: Ensure child nodes are of type 'object'
  • From: Alexandre Torgue <alexandre.torgue@xxxxxx>
• Re: [PATCH 1/4][V2] drivers: spi: core: Add optional delay between cs_change transfers
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH 1/4][V2] drivers: spi: core: Add optional delay between cs_change transfers
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: gpio: Add SPI_MASTER_GPIO_SS flag" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH 3/4][V2] iio: imu: Add support for the ADIS16460 IMU
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 0/4][V2] iio: imu: Add support for the ADIS16460 IMU
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 4/4][V2] dt-bindings: iio: imu: add bindings for ADIS16460
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 1/4][V2] drivers: spi: core: Add optional delay between cs_change transfers
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 2/4][V2] iio: imu: adis: Add support for SPI transfer cs_change_delay_usecs
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Re: [PATCH 2/5] drivers: spi: core: Add optional stall delay between cs_change transfers
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH] spi: remove redundant put_device
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] spi: remove redundant put_device
  • From: Ding Xiang <dingxiang@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 14/15] arm64: defconfig: Enable SDMA on i.mx8mq/8mm
  • From: Shawn Guo <shawnguo@xxxxxxxxxx>
• Re: [PATCH v5 13/15] ARM: dts: imx6sll: correct sdma compatible
  • From: Shawn Guo <shawnguo@xxxxxxxxxx>
• Re: [PATCH v5 12/15] ARM: dts: imx6ul: add dma support on ecspi
  • From: Shawn Guo <shawnguo@xxxxxxxxxx>
• [PATCH] spi: gpio: Use core CS GPIO handling for everything
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] spi: gpio: Add SPI_MASTER_GPIO_SS flag
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: Ensure child nodes are of type 'object'
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] Revert "gpio/spi: Fix spi-gpio regression on active high CS"
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: Ensure child nodes are of type 'object'
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxx>
• Re: [PATCH] dt-bindings: Ensure child nodes are of type 'object'
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH] dt-bindings: Ensure child nodes are of type 'object'
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] Revert "gpio/spi: Fix spi-gpio regression on active high CS"
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH AUTOSEL 5.1 007/219] spi: rockchip: turn down tx dma bursts
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.1 115/219] spi: fix ctrl->num_chipselect constraint
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.2 131/249] spi: fix ctrl->num_chipselect constraint
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.2 007/249] spi: rockchip: turn down tx dma bursts
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.1 007/219] spi: rockchip: turn down tx dma bursts
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.2 007/249] spi: rockchip: turn down tx dma bursts
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH 5/5] docs: spi: convert to ReST and add it to the kABI bookset
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/5] docs: i2c: convert to ReST and add to driver-api bookset
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• RE: [EXT] Re: [PATCH 1/3] spi: spi-nxp-fspi: dynamically alloc AHB memory for FSPI
  • From: Han Xu <han.xu@xxxxxxx>
• Re: [EXT] Re: [PATCH 1/3] spi: spi-nxp-fspi: dynamically alloc AHB memory for FSPI
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Patchwork summary for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• RE: [EXT] Re: [PATCH 1/3] spi: spi-nxp-fspi: dynamically alloc AHB memory for FSPI
  • From: Han Xu <han.xu@xxxxxxx>
• Applied "spi: dt-bindings: spi-controller: remove unnecessary 'maxItems: 1' from reg" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: spi-fsl-qspi: change i.MX7D RX FIFO size" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 1/3] spi: spi-nxp-fspi: dynamically alloc AHB memory for FSPI
  • From: Mark Brown <broonie@xxxxxxxxxx>
• RE: [PATCH v1] spi: dw-mmio: Clock should be shut when error occurs
  • From: Gareth Williams <gareth.williams.jx@xxxxxxxxxxx>
• [PATCH v1] spi: dw-mmio: Clock should be shut when error occurs
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1] spi: dw-mmio: Use devm_platform_ioremap_resource()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v14 2/2] dt-bindings: spi: Document Renesas R-Car Gen3 RPC-IF controller bindings
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH 2/3] spi: spi-fsl-qspi: change i.MX7D RX FIFO size
  • From: han.xu@xxxxxxx
• [PATCH 3/3] spi: spi-fsl-qspi: dynamically alloc AHB memory for QSPI
  • From: han.xu@xxxxxxx
• [PATCH 1/3] spi: spi-nxp-fspi: dynamically alloc AHB memory for FSPI
  • From: han.xu@xxxxxxx
• [PATCH 0/3] dynamically alloc AHB memory
  • From: han.xu@xxxxxxx
• Re: [PATCH v14 2/2] dt-bindings: spi: Document Renesas R-Car Gen3 RPC-IF controller bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] spi: dt-bindings: spi-controller: remove unnecessary 'maxItems: 1' from reg
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [GIT PULL] SPI updates for v5.3
  • From: pr-tracker-bot@xxxxxxxxxx
• Re: [PATCH v2 17/28] drivers: Introduce bus_find_device_by_of_node() helper
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/5] drivers: spi: core: Add optional stall delay between cs_change transfers
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v5 08/15] spi: imx: add new i.mx6ul compatible name in binding doc
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 1/2] DTS: ARM: gta04: define chosen/stdout-path
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH 2/2] DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH 0/2] DTS: ARM: some minor updates and fixes for GTA04
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• glitch in spi-imx rxready irq assertion?
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [GIT PULL] SPI updates for v5.3
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: pxa2xx: Add support for Intel Elkhart Lake" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] Revert "spi: gpio: Don't request CS GPIO in DT use-case"
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] Revert "spi: gpio: Don't request CS GPIO in DT use-case"
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [spi:for-5.3 41/41] drivers/spi/spi-synquacer.c:153:3: error: implicit declaration of function 'readsb'; did you mean 'readb'?
  • From: Masahisa Kojima <masahisa.kojima@xxxxxxxxxx>
• [PATCH] spi: pxa2xx: Add support for Intel Elkhart Lake
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH] gpio/spi: Fix spi-gpio regression on active high CS
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: spi-bcm2835.c: Fix 3-wire mode
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• [PATCH for-5.3] spi: bcm2835: Fix 3-wire mode if DMA is enabled
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH] Revert "spi: gpio: Don't request CS GPIO in DT use-case"
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] gpio/spi: Fix spi-gpio regression on active high CS
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [spi:for-5.3 41/41] drivers/spi/spi-synquacer.c:153:3: error: implicit declaration of function 'readsb'; did you mean 'readb'?
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [spi:for-5.3 41/41] drivers/spi/spi-synquacer.c:153:3: error: implicit declaration of function 'readsb'; did you mean 'readb'?
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [spi:for-5.3 41/41] drivers/spi/spi-synquacer.c:153:3: error: implicit declaration of function 'readsb'; did you mean 'readb'?
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: spi-gpio too fast for some devices
  • From: Christian Mauderer <oss@xxxxxxxxxxxxx>
• Re: [PATCH] Revert "spi: gpio: Don't request CS GPIO in DT use-case"
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Applied "Revert "spi: gpio: Don't request CS GPIO in DT use-case"" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: atmel-quadspi: void return type for atmel_qspi_init()" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: atmel-quadspi: fix resume call" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: gpio: Fix handling of CS GPIO for DT systems" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: pxa2xx: Set minimum transfer speed" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: spi-gpio too fast for some devices
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] Revert "spi: gpio: Don't request CS GPIO in DT use-case"
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] Revert "spi: gpio: Don't request CS GPIO in DT use-case"
  • From: Mark Brown <broonie@xxxxxxxxxx>
• spi: xilinx: Reversion detected on userspace SPI
  • From: "Alvaro G. M." <alvaro.gamez@xxxxxxxxxx>
• Re: spi-gpio too fast for some devices
  • From: Christian Mauderer <oss@xxxxxxxxxxxxx>
• Re: spi-gpio too fast for some devices
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] Revert "spi: gpio: Don't request CS GPIO in DT use-case"
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: spi-gpio too fast for some devices
  • From: Christian Mauderer <oss@xxxxxxxxxxxxx>
• Re: spi-gpio too fast for some devices
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: spi-gpio too fast for some devices
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] spi: spi-bcm2835.c: Fix 3-wire mode
  • From: "Sa, Nuno" <Nuno.Sa@xxxxxxxxxx>
• Re: [PATCH] spi: spi-bcm2835.c: Fix 3-wire mode
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH] spi: spi-bcm2835.c: Fix 3-wire mode
  • From: "Sa, Nuno" <Nuno.Sa@xxxxxxxxxx>
• Re: [PATCH 3/5] docs: i2c: convert to ReST and add to driver-api bookset
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH 3/5] docs: i2c: convert to ReST and add to driver-api bookset
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: spi-gpio too fast for some devices
  • From: Christian Mauderer <oss@xxxxxxxxxxxxx>
• Re: [PATCH 3/5] docs: i2c: convert to ReST and add to driver-api bookset
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH 3/5] docs: i2c: convert to ReST and add to driver-api bookset
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH 3/5] docs: i2c: convert to ReST and add to driver-api bookset
  • From: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
• [PATCH 5/5] docs: spi: convert to ReST and add it to the kABI bookset
  • From: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
• [PATCH 3/5] docs: i2c: convert to ReST and add to driver-api bookset
  • From: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
• [PATCH 0/5] Convert misc-devices, i2c, w1, spi and some markdown files to ReST
  • From: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
• Re: [PATCH] spi: spi-bcm2835.c: Fix 3-wire mode
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Applied "dt-bindings: spi: stm32-qspi: add dma properties" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: stm32-qspi: remove signal sensitive on completion" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH 2/2] spi: atmel-quadspi: fix resume call
  • From: <Tudor.Ambarus@xxxxxxxxxxxxx>
• [PATCH 0/2] spi: atmel-quadspi: fix resume call
  • From: <Tudor.Ambarus@xxxxxxxxxxxxx>
• [PATCH 1/2] spi: atmel-quadspi: void return type for atmel_qspi_init()
  • From: <Tudor.Ambarus@xxxxxxxxxxxxx>
• Re: [PATCH] spi: spi-bcm2835.c: Fix 3-wire mode
  • From: Stefan Wahren <wahrenst@xxxxxxx>
• [PATCH] spi: spi-bcm2835.c: Fix 3-wire mode
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH] spi: pxa2xx: Set minimum transfer speed
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH 4/5] iio: imu: Add support for the ADIS16460 IMU
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH 2/5] drivers: spi: core: Add optional stall delay between cs_change transfers
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH 1/5] MAINTAINERS: add ADIS IMU driver library entry
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• [PATCH] spi: stm32-qspi: remove signal sensitive on completion
  • From: Ludovic Barre <ludovic.Barre@xxxxxx>
• [PATCH] dt-bindings: spi: stm32-qspi: add dma properties
  • From: Ludovic Barre <ludovic.Barre@xxxxxx>
• Re: [PATCH 4/5] iio: imu: Add support for the ADIS16460 IMU
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/5] iio: imu: adis: Add support for SPI transfer cs_change_stall_delay_us
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/5] drivers: spi: core: Add optional stall delay between cs_change transfers
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/5] MAINTAINERS: add ADIS IMU driver library entry
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Applied "spi: uniphier: fix timeout error" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: uniphier: fix zero-length transfer" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [RFC PATCH 0/5] RFC for Zynq QSPI
  • From: naga suresh kumar <nagasureshkumarrelli@xxxxxxxxx>
• [PATCH AUTOSEL 5.1 06/51] spi: bitbang: Fix NULL pointer dereference in spi_unregister_master
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 05/34] spi: bitbang: Fix NULL pointer dereference in spi_unregister_master
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 03/21] spi: bitbang: Fix NULL pointer dereference in spi_unregister_master
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 2/6] spi: bitbang: Fix NULL pointer dereference in spi_unregister_master
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 03/11] spi: bitbang: Fix NULL pointer dereference in spi_unregister_master
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH RFC 2/2] mfd: add Renesas RPC-IF driver
  • From: masonccyang@xxxxxxxxxxx
• [PATCH 0/2] spi: fix spi driver for UniPhier SoC
  • From: Keiji Hayashibara <hayashibara.keiji@xxxxxxxxxxxxx>
• [PATCH 1/2] spi: uniphier: fix timeout error
  • From: Keiji Hayashibara <hayashibara.keiji@xxxxxxxxxxxxx>
• [PATCH 2/2] spi: uniphier: fix zero-length transfer
  • From: Keiji Hayashibara <hayashibara.keiji@xxxxxxxxxxxxx>
• [PATCH 2/5] drivers: spi: core: Add optional stall delay between cs_change transfers
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 3/5] iio: imu: adis: Add support for SPI transfer cs_change_stall_delay_us
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 4/5] iio: imu: Add support for the ADIS16460 IMU
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 1/5] MAINTAINERS: add ADIS IMU driver library entry
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Applied "spi: spi-stm32-qspi: Remove CR_FTHRES_MASK usage" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• RE: [PATCH v5 00/15] add ecspi ERR009165 for i.mx6/7 soc family
  • From: Robin Gong <yibin.gong@xxxxxxx>
• Re: spi-gpio too fast for some devices
  • From: Christian Mauderer <oss@xxxxxxxxxxxxx>
• Re: [PATCH] spi: spi-gpio: Make probe function __init_or_module
  • From: "Enrico Weigelt, metux IT consult" <lkml@xxxxxxxxx>
• Re: spi-gpio too fast for some devices
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH RFC 2/2] mfd: add Renesas RPC-IF driver
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v3 2/4] mtd: rawnand: Add Macronix MX25F0A NAND controller
  • From: masonccyang@xxxxxxxxxxx
• Re: [PATCH v3 2/4] mtd: rawnand: Add Macronix MX25F0A NAND controller
  • From: masonccyang@xxxxxxxxxxx
• Re: [PATCH v5 00/15] add ecspi ERR009165 for i.mx6/7 soc family
  • From: Shawn Guo <shawnguo@xxxxxxxxxx>
• Re: spi-gpio too fast for some devices
  • From: Christian Mauderer <oss@xxxxxxxxxxxxx>
• Re: [PATCH RFC 2/2] mfd: add Renesas RPC-IF driver
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v5 00/15] add ecspi ERR009165 for i.mx6/7 soc family
  • From: Robin Gong <yibin.gong@xxxxxxx>
• Re: [PATCH RFC 2/2] mfd: add Renesas RPC-IF driver
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Applied "spi: spi-synquacer: Fixed build on architectures missing readsl/writesl series" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: fix ctrl->num_chipselect constraint" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH 1/1] spi: spi-stm32-qspi: Remove CR_FTHRES_MASK usage
  • From: <patrice.chotard@xxxxxx>
• Re: [PATCH] spi/acpi: avoid spurious matches during slave enumeration
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH] spi/acpi: avoid spurious matches during slave enumeration
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• [PATCH] spi/acpi: avoid spurious matches during slave enumeration
  • From: Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx>
• Re: [PATCH] spi/acpi: fix incorrect ACPI parent check
  • From: Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx>
• Re: [PATCH] spi/acpi: fix incorrect ACPI parent check
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH] spi/acpi: fix incorrect ACPI parent check
  • From: Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx>
• Re: [PATCH] spi/acpi: fix incorrect ACPI parent check
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi/acpi: fix incorrect ACPI parent check
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH] spi/acpi: fix incorrect ACPI parent check
  • From: Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx>
• [PATCH v14 2/2] dt-bindings: spi: Document Renesas R-Car Gen3 RPC-IF controller bindings
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• [PATCH v14 1/2] spi: Add Renesas R-Car Gen3 RPC-IF SPI controller driver
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• [PATCH v14 0/2] spi: Add Renesas R-Car Gen3 RPC-IF SPI driver
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• [PATCH v2] spi: spi-synquacer: Fixed build on architectures missing readsl/writesl series
  • From: Masahisa Kojima <masahisa.kojima@xxxxxxxxxx>
• Re: [PATCH RFC 2/2] mfd: add Renesas RPC-IF driver
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH RFC 2/2] mfd: add Renesas RPC-IF driver
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH RFC 2/2] mfd: add Renesas RPC-IF driver
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] spi/acpi: fix incorrect ACPI parent check
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH] spi: fix ctrl->num_chipselect constraint
  • From: <Tudor.Ambarus@xxxxxxxxxxxxx>
• Re: [PATCH] spi/acpi: fix incorrect ACPI parent check
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH] spi/acpi: fix incorrect ACPI parent check
  • From: Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx>
• Re: [PATCH] spi/acpi: fix incorrect ACPI parent check
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] include: linux: spi: more helpers for declaring spi drivers
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi/acpi: fix incorrect ACPI parent check
  • From: Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx>
• Re: [PATCH] spi/acpi: fix incorrect ACPI parent check
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH] spi/acpi: fix incorrect ACPI parent check
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH] spi/acpi: fix incorrect ACPI parent check
  • From: Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx>
• Re: [PATCH v3 2/4] mtd: rawnand: Add Macronix MX25F0A NAND controller
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
• Re: [PATCH v3 2/4] mtd: rawnand: Add Macronix MX25F0A NAND controller
  • From: masonccyang@xxxxxxxxxxx
• Re: [PATCH v3 2/4] mtd: rawnand: Add Macronix MX25F0A NAND controller
  • From: masonccyang@xxxxxxxxxxx
• Re: [PATCH v3 2/4] mtd: rawnand: Add Macronix MX25F0A NAND controller
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
• Re: [PATCH v3 2/4] mtd: rawnand: Add Macronix MX25F0A NAND controller
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH v3 2/4] mtd: rawnand: Add Macronix MX25F0A NAND controller
  • From: masonccyang@xxxxxxxxxxx
• Re: [PATCH RFC 2/2] mfd: add Renesas RPC-IF driver
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v13 3/3] dt-bindings: mfd: Document Renesas R-Car Gen3 RPC-IF controller bindings
  • From: masonccyang@xxxxxxxxxxx
• Re: [PATCH RFC 2/2] mfd: add Renesas RPC-IF driver
  • From: masonccyang@xxxxxxxxxxx
• Re: [PATCH RFC 2/2] mfd: add Renesas RPC-IF driver
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH RFC 2/2] mfd: add Renesas RPC-IF driver
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH RFC 2/2] mfd: add Renesas RPC-IF driver
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Applied "spi: don't open code list_for_each_entry_safe_reverse()" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH RFC 2/2] mfd: add Renesas RPC-IF driver
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH] spi: don't open code list_for_each_entry_safe_reverse()
  • From: Vladimir Zapolskiy <vz@xxxxxxxxx>
• Re: [PATCH 2/3] drivers: gpio: pcf857x: use subsys_spi_driver()
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v13 3/3] dt-bindings: mfd: Document Renesas R-Car Gen3 RPC-IF controller bindings
  • From: Marek Vasut <marek.vasut@xxxxxxxxx>
• Re: [PATCH RFC 2/2] mfd: add Renesas RPC-IF driver
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH] spi: Kconfig: spi-synquacer: Added ARM and ARM64 dependence
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: Kconfig: spi-synquacer: Added ARM and ARM64 dependence
  • From: Masahisa Kojima <masahisa.kojima@xxxxxxxxxx>
• Re: [PATCH RFC 2/2] mfd: add Renesas RPC-IF driver
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] spi: Kconfig: spi-synquacer: Added ARM and ARM64 dependence
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH RFC 2/2] mfd: add Renesas RPC-IF driver
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH RFC 2/2] mfd: add Renesas RPC-IF driver
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH RFC 2/2] mfd: add Renesas RPC-IF driver
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH RFC 2/2] mfd: add Renesas RPC-IF driver
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v2 09/28] drivers: Add generic match helper by ACPI_COMPANION device
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH v2 09/28] drivers: Add generic match helper by ACPI_COMPANION device
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• Re: [PATCH] spi: Kconfig: spi-synquacer: Added ARM and ARM64 dependence
  • From: Masahisa Kojima <masahisa.kojima@xxxxxxxxxx>
• Re: [PATCH v3 2/4] mtd: rawnand: Add Macronix MX25F0A NAND controller
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
• Re: [PATCH v3 2/4] mtd: rawnand: Add Macronix MX25F0A NAND controller
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
• Re: [PATCH v3 2/4] mtd: rawnand: Add Macronix MX25F0A NAND controller
  • From: masonccyang@xxxxxxxxxxx
• Re: [PATCH v2 09/28] drivers: Add generic match helper by ACPI_COMPANION device
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• [PATCH 2/3] drivers: gpio: pcf857x: use subsys_spi_driver()
  • From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
• [PATCH 3/3] drivers: gpio: mc33880: use subsys_spi_driver()
  • From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
• [PATCH 1/3] include: linux: spi: more helpers for declaring spi drivers
  • From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
• Applied "spi: Add a prototype for exported spi_set_cs_timing()" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: No need to assign dummy value in spi_unregister_controller()" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v3 2/4] mtd: rawnand: Add Macronix MX25F0A NAND controller
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH] spi: Kconfig: spi-synquacer: Added ARM and ARM64 dependence
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: Kconfig: spi-synquacer: Added ARM and ARM64 dependence
  • From: Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx>
• Re: [PATCH] spi: Kconfig: spi-synquacer: Added ARM and ARM64 dependence
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 06/28] drivers: Add generic helper to match by of_node
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 06/28] drivers: Add generic helper to match by of_node
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• Re: [PATCH RFC 2/2] mfd: add Renesas RPC-IF driver
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH] spi: Kconfig: spi-synquacer: Added ARM and ARM64 dependence
  • From: Masahisa Kojima <masahisa.kojima@xxxxxxxxxx>
• Re: [RFC v2 00/11] DVFS in the OPP core
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [RFC v2 01/11] OPP: Don't overwrite rounded clk rate
  • From: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
• Re: [RFC v2 01/11] OPP: Don't overwrite rounded clk rate
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [RFC v2 01/11] OPP: Don't overwrite rounded clk rate
  • From: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
• Re: [RFC v2 02/11] OPP: Make dev_pm_opp_set_rate() with freq=0 as valid
  • From: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
• Re: [RFC v2 01/11] OPP: Don't overwrite rounded clk rate
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• [PATCH v1] spi: Add a prototype for exported spi_set_cs_timing()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1] spi: No need to assign dummy value in spi_unregister_controller()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 17/28] drivers: Introduce bus_find_device_by_of_node() helper
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 06/28] drivers: Add generic helper to match by of_node
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH RFC 2/2] mfd: add Renesas RPC-IF driver
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH v2 17/28] drivers: Introduce bus_find_device_by_of_node() helper
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• [PATCH v2 09/28] drivers: Add generic match helper by ACPI_COMPANION device
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• [PATCH v2 06/28] drivers: Add generic helper to match by of_node
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• Re: SPI regression with today's build
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: SPI regression with today's build
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• Re: SPI regression with today's build
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• Re: SPI regression with today's build
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: SPI regression with today's build
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [RFC v2 02/11] OPP: Make dev_pm_opp_set_rate() with freq=0 as valid
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• [spi:for-5.3 41/45] drivers/spi/spi-synquacer.c:153:3: error: implicit declaration of function 'readsb'; did you mean 'readb'?
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [RFC v2 01/11] OPP: Don't overwrite rounded clk rate
  • From: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
• Re: [RFC v2 01/11] OPP: Don't overwrite rounded clk rate
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v2] spi/acpi: enumerate all SPI slaves in the namespace
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 07/13] drivers: Add generic match helper by ACPI_COMPANION device
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Applied "spi: qup: fix PIO/DMA transfers." to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [RFC v2 01/11] OPP: Don't overwrite rounded clk rate
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH 07/13] drivers: Add generic match helper by ACPI_COMPANION device
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• Re: [PATCH RFC 2/2] mfd: add Renesas RPC-IF driver
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [RFC v2 01/11] OPP: Don't overwrite rounded clk rate
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [RFC v2 01/11] OPP: Don't overwrite rounded clk rate
  • From: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
• Re: [PATCH v5 10/15] dma: imx-sdma: add i.mx6ul/6sx compatible name
  • From: Robin Gong <yibin.gong@xxxxxxx>
• Re: [PATCH v5 10/15] dma: imx-sdma: add i.mx6ul/6sx compatible name
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [RFC v2 01/11] OPP: Don't overwrite rounded clk rate
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v5 15/15] dmaengine: imx-sdma: add uart rom script
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v5 15/15] dmaengine: imx-sdma: add uart rom script
  • From: Robin Gong <yibin.gong@xxxxxxx>
• Re: [GIT PULL] spi fixes for v5.2
  • From: pr-tracker-bot@xxxxxxxxxx
• spi-gpio too fast for some devices
  • From: Christian Mauderer <oss@xxxxxxxxxxxxx>
• [GIT PULL] spi fixes for v5.2
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v5 15/15] dmaengine: imx-sdma: add uart rom script
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH v5 01/15] Revert "ARM: dts: imx6q: Use correct SDMA script for SPI5 core"
  • From: yibin.gong@xxxxxxx
• [PATCH v5 04/15] dmaengine: imx-sdma: remove dupilicated sdma_load_context
  • From: yibin.gong@xxxxxxx
• [PATCH v5 03/15] Revert "dmaengine: imx-sdma: refine to load context only once"
  • From: yibin.gong@xxxxxxx
• [PATCH v5 02/15] Revert "ARM: dts: imx6: Use correct SDMA script for SPI cores"
  • From: yibin.gong@xxxxxxx
• [PATCH v5 00/15] add ecspi ERR009165 for i.mx6/7 soc family
  • From: yibin.gong@xxxxxxx
• [PATCH v5 05/15] dmaengine: imx-sdma: add mcu_2_ecspi script
  • From: yibin.gong@xxxxxxx
• [PATCH v5 06/15] spi: imx: fix ERR009165
  • From: yibin.gong@xxxxxxx
• [PATCH v5 08/15] spi: imx: add new i.mx6ul compatible name in binding doc
  • From: yibin.gong@xxxxxxx
• [PATCH v5 15/15] dmaengine: imx-sdma: add uart rom script
  • From: yibin.gong@xxxxxxx
• [PATCH v5 14/15] arm64: defconfig: Enable SDMA on i.mx8mq/8mm
  • From: yibin.gong@xxxxxxx
• [PATCH v5 13/15] ARM: dts: imx6sll: correct sdma compatible
  • From: yibin.gong@xxxxxxx
• [PATCH v5 12/15] ARM: dts: imx6ul: add dma support on ecspi
  • From: yibin.gong@xxxxxxx
• [PATCH v5 11/15] dmaengine: imx-sdma: fix ecspi1 rx dma not work on i.mx8mm
  • From: yibin.gong@xxxxxxx
• [PATCH v5 09/15] dmaengine: imx-sdma: remove ERR009165 on i.mx6ul
  • From: yibin.gong@xxxxxxx
• [PATCH v5 10/15] dma: imx-sdma: add i.mx6ul/6sx compatible name
  • From: yibin.gong@xxxxxxx
• [PATCH v5 07/15] spi: imx: remove ERR009165 workaround on i.mx6ul
  • From: yibin.gong@xxxxxxx
• [PATCH] spi: qup: fix PIO/DMA transfers.
  • From: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@xxxxxxxxxx>
• Re: [PATCH v2] spi/acpi: enumerate all SPI slaves in the namespace
  • From: "Life is hard, and then you die" <ronald@xxxxxxxxxxxxx>
• [PATCH] spi: Use struct_size() helper
  • From: "Gustavo A. R. Silva" <gustavo@xxxxxxxxxxxxxx>
• Re: [PATCH] spi: spi-gpio: Make probe function __init_or_module
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: spi-gpio: Make probe function __init_or_module
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH] spi: spi-gpio: Make probe function __init_or_module
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] spi: spi-gpio: Make probe function __init_or_module
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Applied "spi: mediatek: add SPI_LSB_FIRST support" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 07/13] drivers: Add generic match helper by ACPI_COMPANION device
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH 07/13] drivers: Add generic match helper by ACPI_COMPANION device
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• Re: [PATCH 07/13] drivers: Add generic match helper by ACPI_COMPANION device
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH v13 3/3] dt-bindings: mfd: Document Renesas R-Car Gen3 RPC-IF controller bindings
  • From: masonccyang@xxxxxxxxxxx
• Re: Applied "spi: rockchip: turn down tx dma bursts" to the spi tree
  • From: Emil Renner Berthing <kernel@xxxxxxxx>
• Re: Applied "spi: rockchip: turn down tx dma bursts" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: Applied "spi: rockchip: turn down tx dma bursts" to the spi tree
  • From: Emil Renner Berthing <kernel@xxxxxxxx>
• [PATCH 11/13] drivers: Introduce variants for bus_find_device()
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• [PATCH 07/13] drivers: Add generic match helper by ACPI_COMPANION device
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• [PATCH 04/13] drivers: Add generic helper to match by of_node
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• Re: [PATCH RFC] spi: add Renesas RPC-IF driver
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] spi-bcm2835: Always initialize local variable in bcm2835_wr_fifo_count
  • From: Michael Büsch <m@xxxxxxx>
• [PATCH] spi: mediatek: add SPI_LSB_FIRST support
  • From: Leilk Liu <leilk.liu@xxxxxxxxxxxx>
• Diolan DLN2 Linux SPI driver usage
  • From: Michael Tandy <lkml@xxxxxxxxx>
• [spi:for-5.3 41/41] drivers/spi/spi-synquacer.c:153:3: error: implicit declaration of function 'readsb'; did you mean 'readb'?
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH] spidev: Use dev_dbg() instead of pr_debug()
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: Add spi driver for Socionext SynQuacer platform" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: Add DT bindings for Synquacer" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "MAINTAINERS: Add entry for Synquacer SPI driver" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spidev: Use dev_dbg() instead of pr_debug()
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH v7 3/3] spi: Add spi driver for Socionext SynQuacer platform
  • From: Masahisa Kojima <masahisa.kojima@xxxxxxxxxx>
• [PATCH v7 2/3] dt-bindings: spi: Add DT bindings for Synquacer
  • From: Masahisa Kojima <masahisa.kojima@xxxxxxxxxx>
• [PATCH v7 1/3] MAINTAINERS: Add entry for Synquacer SPI driver
  • From: Masahisa Kojima <masahisa.kojima@xxxxxxxxxx>
• [PATCH v7 0/3] spi: support for Socionext Synquacer platform
  • From: Masahisa Kojima <masahisa.kojima@xxxxxxxxxx>
• Re: [PATCH v6 3/3] spi: Add spi driver for Socionext Synquacer platform
  • From: Masahisa Kojima <masahisa.kojima@xxxxxxxxxx>
• [PATCH] spidev: Use dev_dbg() instead of pr_debug()
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: [PATCH v13 1/3] mfd: Add Renesas R-Car Gen3 RPC-IF MFD driver
  • From: masonccyang@xxxxxxxxxxx
• Applied "spi: qup: remove unnecessary goto" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [RFC PATCH 23/57] drivers: spi: Use bus_find_device_by_acpi_dev match helper
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [RFC PATCH 08/57] drivers: spi: Use bus_find_device_by_of_node helper
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: spidev: Fix for reverting spi max speed value only on failure
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2] spi/acpi: enumerate all SPI slaves in the namespace
  • From: Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx>
• [RFC PATCH 08/57] drivers: spi: Use bus_find_device_by_of_node helper
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• [RFC PATCH 23/57] drivers: spi: Use bus_find_device_by_acpi_dev match helper
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• Re: [PATCH v13 3/3] dt-bindings: mfd: Document Renesas R-Car Gen3 RPC-IF controller bindings
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v13 3/3] dt-bindings: mfd: Document Renesas R-Car Gen3 RPC-IF controller bindings
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v13 1/3] mfd: Add Renesas R-Car Gen3 RPC-IF MFD driver
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v2] spi/acpi: enumerate all SPI slaves in the namespace
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH RFC 0/2] Add Renesas RPC-IF support
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH] spi: spidev: Fix for reverting spi max speed value only on failure
  • From: Vivek Pernamitta <pervivek@xxxxxxxxx>
• [PATCH AUTOSEL 4.4 52/56] dmaengine: idma64: Use actual device for DMA transfers
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH] spi: qup: remove unnecessary goto
  • From: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@xxxxxxxxxx>
• [PATCH RFC] spi: add Renesas RPC-IF driver
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH RFC 2/2] mfd: add Renesas RPC-IF driver
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH RFC 1/2] dt-bindings: mfd: document Renesas RPC-IF bindings
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>