Linux SPI

• Thread Index

• [PATCH 2/3] spi: spi-fsl-qspi: change i.MX7D RX FIFO size
  • From: han.xu@xxxxxxx
• [PATCH 3/3] spi: spi-fsl-qspi: dynamically alloc AHB memory for QSPI
  • From: han.xu@xxxxxxx
• [PATCH 1/3] spi: spi-nxp-fspi: dynamically alloc AHB memory for FSPI
  • From: han.xu@xxxxxxx
• [PATCH 0/3] dynamically alloc AHB memory
  • From: han.xu@xxxxxxx
• Re: [PATCH v14 2/2] dt-bindings: spi: Document Renesas R-Car Gen3 RPC-IF controller bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] spi: dt-bindings: spi-controller: remove unnecessary 'maxItems: 1' from reg
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [GIT PULL] SPI updates for v5.3
  • From: pr-tracker-bot@xxxxxxxxxx
• Re: [PATCH v2 17/28] drivers: Introduce bus_find_device_by_of_node() helper
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/5] drivers: spi: core: Add optional stall delay between cs_change transfers
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v5 08/15] spi: imx: add new i.mx6ul compatible name in binding doc
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 1/2] DTS: ARM: gta04: define chosen/stdout-path
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH 2/2] DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH 0/2] DTS: ARM: some minor updates and fixes for GTA04
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• glitch in spi-imx rxready irq assertion?
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [GIT PULL] SPI updates for v5.3
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: pxa2xx: Add support for Intel Elkhart Lake" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] Revert "spi: gpio: Don't request CS GPIO in DT use-case"
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] Revert "spi: gpio: Don't request CS GPIO in DT use-case"
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [spi:for-5.3 41/41] drivers/spi/spi-synquacer.c:153:3: error: implicit declaration of function 'readsb'; did you mean 'readb'?
  • From: Masahisa Kojima <masahisa.kojima@xxxxxxxxxx>
• [PATCH] spi: pxa2xx: Add support for Intel Elkhart Lake
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH] gpio/spi: Fix spi-gpio regression on active high CS
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: spi-bcm2835.c: Fix 3-wire mode
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• [PATCH for-5.3] spi: bcm2835: Fix 3-wire mode if DMA is enabled
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH] Revert "spi: gpio: Don't request CS GPIO in DT use-case"
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] gpio/spi: Fix spi-gpio regression on active high CS
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [spi:for-5.3 41/41] drivers/spi/spi-synquacer.c:153:3: error: implicit declaration of function 'readsb'; did you mean 'readb'?
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [spi:for-5.3 41/41] drivers/spi/spi-synquacer.c:153:3: error: implicit declaration of function 'readsb'; did you mean 'readb'?
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [spi:for-5.3 41/41] drivers/spi/spi-synquacer.c:153:3: error: implicit declaration of function 'readsb'; did you mean 'readb'?
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: spi-gpio too fast for some devices
  • From: Christian Mauderer <oss@xxxxxxxxxxxxx>
• Re: [PATCH] Revert "spi: gpio: Don't request CS GPIO in DT use-case"
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Applied "Revert "spi: gpio: Don't request CS GPIO in DT use-case"" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: atmel-quadspi: void return type for atmel_qspi_init()" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: atmel-quadspi: fix resume call" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: gpio: Fix handling of CS GPIO for DT systems" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: pxa2xx: Set minimum transfer speed" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: spi-gpio too fast for some devices
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] Revert "spi: gpio: Don't request CS GPIO in DT use-case"
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] Revert "spi: gpio: Don't request CS GPIO in DT use-case"
  • From: Mark Brown <broonie@xxxxxxxxxx>
• spi: xilinx: Reversion detected on userspace SPI
  • From: "Alvaro G. M." <alvaro.gamez@xxxxxxxxxx>
• Re: spi-gpio too fast for some devices
  • From: Christian Mauderer <oss@xxxxxxxxxxxxx>
• Re: spi-gpio too fast for some devices
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] Revert "spi: gpio: Don't request CS GPIO in DT use-case"
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: spi-gpio too fast for some devices
  • From: Christian Mauderer <oss@xxxxxxxxxxxxx>
• Re: spi-gpio too fast for some devices
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: spi-gpio too fast for some devices
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] spi: spi-bcm2835.c: Fix 3-wire mode
  • From: "Sa, Nuno" <Nuno.Sa@xxxxxxxxxx>
• Re: [PATCH] spi: spi-bcm2835.c: Fix 3-wire mode
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH] spi: spi-bcm2835.c: Fix 3-wire mode
  • From: "Sa, Nuno" <Nuno.Sa@xxxxxxxxxx>
• Re: [PATCH 3/5] docs: i2c: convert to ReST and add to driver-api bookset
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH 3/5] docs: i2c: convert to ReST and add to driver-api bookset
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: spi-gpio too fast for some devices
  • From: Christian Mauderer <oss@xxxxxxxxxxxxx>
• Re: [PATCH 3/5] docs: i2c: convert to ReST and add to driver-api bookset
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH 3/5] docs: i2c: convert to ReST and add to driver-api bookset
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH 3/5] docs: i2c: convert to ReST and add to driver-api bookset
  • From: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
• [PATCH 5/5] docs: spi: convert to ReST and add it to the kABI bookset
  • From: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
• [PATCH 3/5] docs: i2c: convert to ReST and add to driver-api bookset
  • From: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
• [PATCH 0/5] Convert misc-devices, i2c, w1, spi and some markdown files to ReST
  • From: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
• Re: [PATCH] spi: spi-bcm2835.c: Fix 3-wire mode
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Applied "dt-bindings: spi: stm32-qspi: add dma properties" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: stm32-qspi: remove signal sensitive on completion" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH 2/2] spi: atmel-quadspi: fix resume call
  • From: <Tudor.Ambarus@xxxxxxxxxxxxx>
• [PATCH 0/2] spi: atmel-quadspi: fix resume call
  • From: <Tudor.Ambarus@xxxxxxxxxxxxx>
• [PATCH 1/2] spi: atmel-quadspi: void return type for atmel_qspi_init()
  • From: <Tudor.Ambarus@xxxxxxxxxxxxx>
• Re: [PATCH] spi: spi-bcm2835.c: Fix 3-wire mode
  • From: Stefan Wahren <wahrenst@xxxxxxx>
• [PATCH] spi: spi-bcm2835.c: Fix 3-wire mode
  • From: Nuno Sá <nuno.sa@xxxxxxxxxx>
• [PATCH] spi: pxa2xx: Set minimum transfer speed
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH 4/5] iio: imu: Add support for the ADIS16460 IMU
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH 2/5] drivers: spi: core: Add optional stall delay between cs_change transfers
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH 1/5] MAINTAINERS: add ADIS IMU driver library entry
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• [PATCH] spi: stm32-qspi: remove signal sensitive on completion
  • From: Ludovic Barre <ludovic.Barre@xxxxxx>
• [PATCH] dt-bindings: spi: stm32-qspi: add dma properties
  • From: Ludovic Barre <ludovic.Barre@xxxxxx>
• Re: [PATCH 4/5] iio: imu: Add support for the ADIS16460 IMU
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/5] iio: imu: adis: Add support for SPI transfer cs_change_stall_delay_us
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/5] drivers: spi: core: Add optional stall delay between cs_change transfers
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/5] MAINTAINERS: add ADIS IMU driver library entry
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Applied "spi: uniphier: fix timeout error" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: uniphier: fix zero-length transfer" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [RFC PATCH 0/5] RFC for Zynq QSPI
  • From: naga suresh kumar <nagasureshkumarrelli@xxxxxxxxx>
• [PATCH AUTOSEL 5.1 06/51] spi: bitbang: Fix NULL pointer dereference in spi_unregister_master
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 05/34] spi: bitbang: Fix NULL pointer dereference in spi_unregister_master
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 03/21] spi: bitbang: Fix NULL pointer dereference in spi_unregister_master
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 2/6] spi: bitbang: Fix NULL pointer dereference in spi_unregister_master
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 03/11] spi: bitbang: Fix NULL pointer dereference in spi_unregister_master
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH RFC 2/2] mfd: add Renesas RPC-IF driver
  • From: masonccyang@xxxxxxxxxxx
• [PATCH 0/2] spi: fix spi driver for UniPhier SoC
  • From: Keiji Hayashibara <hayashibara.keiji@xxxxxxxxxxxxx>
• [PATCH 1/2] spi: uniphier: fix timeout error
  • From: Keiji Hayashibara <hayashibara.keiji@xxxxxxxxxxxxx>
• [PATCH 2/2] spi: uniphier: fix zero-length transfer
  • From: Keiji Hayashibara <hayashibara.keiji@xxxxxxxxxxxxx>
• [PATCH 2/5] drivers: spi: core: Add optional stall delay between cs_change transfers
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 3/5] iio: imu: adis: Add support for SPI transfer cs_change_stall_delay_us
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 4/5] iio: imu: Add support for the ADIS16460 IMU
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 1/5] MAINTAINERS: add ADIS IMU driver library entry
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Applied "spi: spi-stm32-qspi: Remove CR_FTHRES_MASK usage" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• RE: [PATCH v5 00/15] add ecspi ERR009165 for i.mx6/7 soc family
  • From: Robin Gong <yibin.gong@xxxxxxx>
• Re: spi-gpio too fast for some devices
  • From: Christian Mauderer <oss@xxxxxxxxxxxxx>
• Re: [PATCH] spi: spi-gpio: Make probe function __init_or_module
  • From: "Enrico Weigelt, metux IT consult" <lkml@xxxxxxxxx>
• Re: spi-gpio too fast for some devices
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH RFC 2/2] mfd: add Renesas RPC-IF driver
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v3 2/4] mtd: rawnand: Add Macronix MX25F0A NAND controller
  • From: masonccyang@xxxxxxxxxxx
• Re: [PATCH v3 2/4] mtd: rawnand: Add Macronix MX25F0A NAND controller
  • From: masonccyang@xxxxxxxxxxx
• Re: [PATCH v5 00/15] add ecspi ERR009165 for i.mx6/7 soc family
  • From: Shawn Guo <shawnguo@xxxxxxxxxx>
• Re: spi-gpio too fast for some devices
  • From: Christian Mauderer <oss@xxxxxxxxxxxxx>
• Re: [PATCH RFC 2/2] mfd: add Renesas RPC-IF driver
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v5 00/15] add ecspi ERR009165 for i.mx6/7 soc family
  • From: Robin Gong <yibin.gong@xxxxxxx>
• Re: [PATCH RFC 2/2] mfd: add Renesas RPC-IF driver
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Applied "spi: spi-synquacer: Fixed build on architectures missing readsl/writesl series" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: fix ctrl->num_chipselect constraint" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH 1/1] spi: spi-stm32-qspi: Remove CR_FTHRES_MASK usage
  • From: <patrice.chotard@xxxxxx>
• Re: [PATCH] spi/acpi: avoid spurious matches during slave enumeration
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH] spi/acpi: avoid spurious matches during slave enumeration
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• [PATCH] spi/acpi: avoid spurious matches during slave enumeration
  • From: Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx>
• Re: [PATCH] spi/acpi: fix incorrect ACPI parent check
  • From: Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx>
• Re: [PATCH] spi/acpi: fix incorrect ACPI parent check
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH] spi/acpi: fix incorrect ACPI parent check
  • From: Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx>
• Re: [PATCH] spi/acpi: fix incorrect ACPI parent check
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi/acpi: fix incorrect ACPI parent check
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH] spi/acpi: fix incorrect ACPI parent check
  • From: Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx>
• [PATCH v14 2/2] dt-bindings: spi: Document Renesas R-Car Gen3 RPC-IF controller bindings
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• [PATCH v14 1/2] spi: Add Renesas R-Car Gen3 RPC-IF SPI controller driver
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• [PATCH v14 0/2] spi: Add Renesas R-Car Gen3 RPC-IF SPI driver
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• [PATCH v2] spi: spi-synquacer: Fixed build on architectures missing readsl/writesl series
  • From: Masahisa Kojima <masahisa.kojima@xxxxxxxxxx>
• Re: [PATCH RFC 2/2] mfd: add Renesas RPC-IF driver
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH RFC 2/2] mfd: add Renesas RPC-IF driver
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH RFC 2/2] mfd: add Renesas RPC-IF driver
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] spi/acpi: fix incorrect ACPI parent check
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH] spi: fix ctrl->num_chipselect constraint
  • From: <Tudor.Ambarus@xxxxxxxxxxxxx>
• Re: [PATCH] spi/acpi: fix incorrect ACPI parent check
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH] spi/acpi: fix incorrect ACPI parent check
  • From: Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx>
• Re: [PATCH] spi/acpi: fix incorrect ACPI parent check
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] include: linux: spi: more helpers for declaring spi drivers
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi/acpi: fix incorrect ACPI parent check
  • From: Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx>
• Re: [PATCH] spi/acpi: fix incorrect ACPI parent check
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH] spi/acpi: fix incorrect ACPI parent check
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH] spi/acpi: fix incorrect ACPI parent check
  • From: Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx>
• Re: [PATCH v3 2/4] mtd: rawnand: Add Macronix MX25F0A NAND controller
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
• Re: [PATCH v3 2/4] mtd: rawnand: Add Macronix MX25F0A NAND controller
  • From: masonccyang@xxxxxxxxxxx
• Re: [PATCH v3 2/4] mtd: rawnand: Add Macronix MX25F0A NAND controller
  • From: masonccyang@xxxxxxxxxxx
• Re: [PATCH v3 2/4] mtd: rawnand: Add Macronix MX25F0A NAND controller
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
• Re: [PATCH v3 2/4] mtd: rawnand: Add Macronix MX25F0A NAND controller
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH v3 2/4] mtd: rawnand: Add Macronix MX25F0A NAND controller
  • From: masonccyang@xxxxxxxxxxx
• Re: [PATCH RFC 2/2] mfd: add Renesas RPC-IF driver
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v13 3/3] dt-bindings: mfd: Document Renesas R-Car Gen3 RPC-IF controller bindings
  • From: masonccyang@xxxxxxxxxxx
• Re: [PATCH RFC 2/2] mfd: add Renesas RPC-IF driver
  • From: masonccyang@xxxxxxxxxxx
• Re: [PATCH RFC 2/2] mfd: add Renesas RPC-IF driver
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH RFC 2/2] mfd: add Renesas RPC-IF driver
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH RFC 2/2] mfd: add Renesas RPC-IF driver
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Applied "spi: don't open code list_for_each_entry_safe_reverse()" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH RFC 2/2] mfd: add Renesas RPC-IF driver
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH] spi: don't open code list_for_each_entry_safe_reverse()
  • From: Vladimir Zapolskiy <vz@xxxxxxxxx>
• Re: [PATCH 2/3] drivers: gpio: pcf857x: use subsys_spi_driver()
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v13 3/3] dt-bindings: mfd: Document Renesas R-Car Gen3 RPC-IF controller bindings
  • From: Marek Vasut <marek.vasut@xxxxxxxxx>
• Re: [PATCH RFC 2/2] mfd: add Renesas RPC-IF driver
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH] spi: Kconfig: spi-synquacer: Added ARM and ARM64 dependence
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: Kconfig: spi-synquacer: Added ARM and ARM64 dependence
  • From: Masahisa Kojima <masahisa.kojima@xxxxxxxxxx>
• Re: [PATCH RFC 2/2] mfd: add Renesas RPC-IF driver
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] spi: Kconfig: spi-synquacer: Added ARM and ARM64 dependence
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH RFC 2/2] mfd: add Renesas RPC-IF driver
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH RFC 2/2] mfd: add Renesas RPC-IF driver
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH RFC 2/2] mfd: add Renesas RPC-IF driver
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH RFC 2/2] mfd: add Renesas RPC-IF driver
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v2 09/28] drivers: Add generic match helper by ACPI_COMPANION device
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH v2 09/28] drivers: Add generic match helper by ACPI_COMPANION device
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• Re: [PATCH] spi: Kconfig: spi-synquacer: Added ARM and ARM64 dependence
  • From: Masahisa Kojima <masahisa.kojima@xxxxxxxxxx>
• Re: [PATCH v3 2/4] mtd: rawnand: Add Macronix MX25F0A NAND controller
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
• Re: [PATCH v3 2/4] mtd: rawnand: Add Macronix MX25F0A NAND controller
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
• Re: [PATCH v3 2/4] mtd: rawnand: Add Macronix MX25F0A NAND controller
  • From: masonccyang@xxxxxxxxxxx
• Re: [PATCH v2 09/28] drivers: Add generic match helper by ACPI_COMPANION device
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• [PATCH 2/3] drivers: gpio: pcf857x: use subsys_spi_driver()
  • From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
• [PATCH 3/3] drivers: gpio: mc33880: use subsys_spi_driver()
  • From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
• [PATCH 1/3] include: linux: spi: more helpers for declaring spi drivers
  • From: "Enrico Weigelt, metux IT consult" <info@xxxxxxxxx>
• Applied "spi: Add a prototype for exported spi_set_cs_timing()" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: No need to assign dummy value in spi_unregister_controller()" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v3 2/4] mtd: rawnand: Add Macronix MX25F0A NAND controller
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH] spi: Kconfig: spi-synquacer: Added ARM and ARM64 dependence
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: Kconfig: spi-synquacer: Added ARM and ARM64 dependence
  • From: Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx>
• Re: [PATCH] spi: Kconfig: spi-synquacer: Added ARM and ARM64 dependence
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 06/28] drivers: Add generic helper to match by of_node
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 06/28] drivers: Add generic helper to match by of_node
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• Re: [PATCH RFC 2/2] mfd: add Renesas RPC-IF driver
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH] spi: Kconfig: spi-synquacer: Added ARM and ARM64 dependence
  • From: Masahisa Kojima <masahisa.kojima@xxxxxxxxxx>
• Re: [RFC v2 00/11] DVFS in the OPP core
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [RFC v2 01/11] OPP: Don't overwrite rounded clk rate
  • From: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
• Re: [RFC v2 01/11] OPP: Don't overwrite rounded clk rate
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [RFC v2 01/11] OPP: Don't overwrite rounded clk rate
  • From: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
• Re: [RFC v2 02/11] OPP: Make dev_pm_opp_set_rate() with freq=0 as valid
  • From: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
• Re: [RFC v2 01/11] OPP: Don't overwrite rounded clk rate
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• [PATCH v1] spi: Add a prototype for exported spi_set_cs_timing()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1] spi: No need to assign dummy value in spi_unregister_controller()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 17/28] drivers: Introduce bus_find_device_by_of_node() helper
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 06/28] drivers: Add generic helper to match by of_node
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH RFC 2/2] mfd: add Renesas RPC-IF driver
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH v2 17/28] drivers: Introduce bus_find_device_by_of_node() helper
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• [PATCH v2 09/28] drivers: Add generic match helper by ACPI_COMPANION device
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• [PATCH v2 06/28] drivers: Add generic helper to match by of_node
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• Re: SPI regression with today's build
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: SPI regression with today's build
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• Re: SPI regression with today's build
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• Re: SPI regression with today's build
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: SPI regression with today's build
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [RFC v2 02/11] OPP: Make dev_pm_opp_set_rate() with freq=0 as valid
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• [spi:for-5.3 41/45] drivers/spi/spi-synquacer.c:153:3: error: implicit declaration of function 'readsb'; did you mean 'readb'?
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [RFC v2 01/11] OPP: Don't overwrite rounded clk rate
  • From: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
• Re: [RFC v2 01/11] OPP: Don't overwrite rounded clk rate
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v2] spi/acpi: enumerate all SPI slaves in the namespace
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 07/13] drivers: Add generic match helper by ACPI_COMPANION device
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Applied "spi: qup: fix PIO/DMA transfers." to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [RFC v2 01/11] OPP: Don't overwrite rounded clk rate
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH 07/13] drivers: Add generic match helper by ACPI_COMPANION device
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• Re: [PATCH RFC 2/2] mfd: add Renesas RPC-IF driver
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [RFC v2 01/11] OPP: Don't overwrite rounded clk rate
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [RFC v2 01/11] OPP: Don't overwrite rounded clk rate
  • From: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
• Re: [PATCH v5 10/15] dma: imx-sdma: add i.mx6ul/6sx compatible name
  • From: Robin Gong <yibin.gong@xxxxxxx>
• Re: [PATCH v5 10/15] dma: imx-sdma: add i.mx6ul/6sx compatible name
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [RFC v2 01/11] OPP: Don't overwrite rounded clk rate
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH v5 15/15] dmaengine: imx-sdma: add uart rom script
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v5 15/15] dmaengine: imx-sdma: add uart rom script
  • From: Robin Gong <yibin.gong@xxxxxxx>
• Re: [GIT PULL] spi fixes for v5.2
  • From: pr-tracker-bot@xxxxxxxxxx
• spi-gpio too fast for some devices
  • From: Christian Mauderer <oss@xxxxxxxxxxxxx>
• [GIT PULL] spi fixes for v5.2
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v5 15/15] dmaengine: imx-sdma: add uart rom script
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH v5 01/15] Revert "ARM: dts: imx6q: Use correct SDMA script for SPI5 core"
  • From: yibin.gong@xxxxxxx
• [PATCH v5 04/15] dmaengine: imx-sdma: remove dupilicated sdma_load_context
  • From: yibin.gong@xxxxxxx
• [PATCH v5 03/15] Revert "dmaengine: imx-sdma: refine to load context only once"
  • From: yibin.gong@xxxxxxx
• [PATCH v5 02/15] Revert "ARM: dts: imx6: Use correct SDMA script for SPI cores"
  • From: yibin.gong@xxxxxxx
• [PATCH v5 00/15] add ecspi ERR009165 for i.mx6/7 soc family
  • From: yibin.gong@xxxxxxx
• [PATCH v5 05/15] dmaengine: imx-sdma: add mcu_2_ecspi script
  • From: yibin.gong@xxxxxxx
• [PATCH v5 06/15] spi: imx: fix ERR009165
  • From: yibin.gong@xxxxxxx
• [PATCH v5 08/15] spi: imx: add new i.mx6ul compatible name in binding doc
  • From: yibin.gong@xxxxxxx
• [PATCH v5 15/15] dmaengine: imx-sdma: add uart rom script
  • From: yibin.gong@xxxxxxx
• [PATCH v5 14/15] arm64: defconfig: Enable SDMA on i.mx8mq/8mm
  • From: yibin.gong@xxxxxxx
• [PATCH v5 13/15] ARM: dts: imx6sll: correct sdma compatible
  • From: yibin.gong@xxxxxxx
• [PATCH v5 12/15] ARM: dts: imx6ul: add dma support on ecspi
  • From: yibin.gong@xxxxxxx
• [PATCH v5 11/15] dmaengine: imx-sdma: fix ecspi1 rx dma not work on i.mx8mm
  • From: yibin.gong@xxxxxxx
• [PATCH v5 09/15] dmaengine: imx-sdma: remove ERR009165 on i.mx6ul
  • From: yibin.gong@xxxxxxx
• [PATCH v5 10/15] dma: imx-sdma: add i.mx6ul/6sx compatible name
  • From: yibin.gong@xxxxxxx
• [PATCH v5 07/15] spi: imx: remove ERR009165 workaround on i.mx6ul
  • From: yibin.gong@xxxxxxx
• [PATCH] spi: qup: fix PIO/DMA transfers.
  • From: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@xxxxxxxxxx>
• Re: [PATCH v2] spi/acpi: enumerate all SPI slaves in the namespace
  • From: "Life is hard, and then you die" <ronald@xxxxxxxxxxxxx>
• [PATCH] spi: Use struct_size() helper
  • From: "Gustavo A. R. Silva" <gustavo@xxxxxxxxxxxxxx>
• Re: [PATCH] spi: spi-gpio: Make probe function __init_or_module
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: spi-gpio: Make probe function __init_or_module
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH] spi: spi-gpio: Make probe function __init_or_module
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] spi: spi-gpio: Make probe function __init_or_module
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Applied "spi: mediatek: add SPI_LSB_FIRST support" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 07/13] drivers: Add generic match helper by ACPI_COMPANION device
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH 07/13] drivers: Add generic match helper by ACPI_COMPANION device
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• Re: [PATCH 07/13] drivers: Add generic match helper by ACPI_COMPANION device
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH v13 3/3] dt-bindings: mfd: Document Renesas R-Car Gen3 RPC-IF controller bindings
  • From: masonccyang@xxxxxxxxxxx
• Re: Applied "spi: rockchip: turn down tx dma bursts" to the spi tree
  • From: Emil Renner Berthing <kernel@xxxxxxxx>
• Re: Applied "spi: rockchip: turn down tx dma bursts" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: Applied "spi: rockchip: turn down tx dma bursts" to the spi tree
  • From: Emil Renner Berthing <kernel@xxxxxxxx>
• [PATCH 11/13] drivers: Introduce variants for bus_find_device()
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• [PATCH 07/13] drivers: Add generic match helper by ACPI_COMPANION device
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• [PATCH 04/13] drivers: Add generic helper to match by of_node
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• Re: [PATCH RFC] spi: add Renesas RPC-IF driver
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] spi-bcm2835: Always initialize local variable in bcm2835_wr_fifo_count
  • From: Michael Büsch <m@xxxxxxx>
• [PATCH] spi: mediatek: add SPI_LSB_FIRST support
  • From: Leilk Liu <leilk.liu@xxxxxxxxxxxx>
• Diolan DLN2 Linux SPI driver usage
  • From: Michael Tandy <lkml@xxxxxxxxx>
• [spi:for-5.3 41/41] drivers/spi/spi-synquacer.c:153:3: error: implicit declaration of function 'readsb'; did you mean 'readb'?
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH] spidev: Use dev_dbg() instead of pr_debug()
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: Add spi driver for Socionext SynQuacer platform" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: Add DT bindings for Synquacer" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "MAINTAINERS: Add entry for Synquacer SPI driver" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spidev: Use dev_dbg() instead of pr_debug()
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH v7 3/3] spi: Add spi driver for Socionext SynQuacer platform
  • From: Masahisa Kojima <masahisa.kojima@xxxxxxxxxx>
• [PATCH v7 2/3] dt-bindings: spi: Add DT bindings for Synquacer
  • From: Masahisa Kojima <masahisa.kojima@xxxxxxxxxx>
• [PATCH v7 1/3] MAINTAINERS: Add entry for Synquacer SPI driver
  • From: Masahisa Kojima <masahisa.kojima@xxxxxxxxxx>
• [PATCH v7 0/3] spi: support for Socionext Synquacer platform
  • From: Masahisa Kojima <masahisa.kojima@xxxxxxxxxx>
• Re: [PATCH v6 3/3] spi: Add spi driver for Socionext Synquacer platform
  • From: Masahisa Kojima <masahisa.kojima@xxxxxxxxxx>
• [PATCH] spidev: Use dev_dbg() instead of pr_debug()
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: [PATCH v13 1/3] mfd: Add Renesas R-Car Gen3 RPC-IF MFD driver
  • From: masonccyang@xxxxxxxxxxx
• Applied "spi: qup: remove unnecessary goto" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [RFC PATCH 23/57] drivers: spi: Use bus_find_device_by_acpi_dev match helper
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [RFC PATCH 08/57] drivers: spi: Use bus_find_device_by_of_node helper
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: spidev: Fix for reverting spi max speed value only on failure
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2] spi/acpi: enumerate all SPI slaves in the namespace
  • From: Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx>
• [RFC PATCH 08/57] drivers: spi: Use bus_find_device_by_of_node helper
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• [RFC PATCH 23/57] drivers: spi: Use bus_find_device_by_acpi_dev match helper
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• Re: [PATCH v13 3/3] dt-bindings: mfd: Document Renesas R-Car Gen3 RPC-IF controller bindings
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v13 3/3] dt-bindings: mfd: Document Renesas R-Car Gen3 RPC-IF controller bindings
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v13 1/3] mfd: Add Renesas R-Car Gen3 RPC-IF MFD driver
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v2] spi/acpi: enumerate all SPI slaves in the namespace
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH RFC 0/2] Add Renesas RPC-IF support
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH] spi: spidev: Fix for reverting spi max speed value only on failure
  • From: Vivek Pernamitta <pervivek@xxxxxxxxx>
• [PATCH AUTOSEL 4.4 52/56] dmaengine: idma64: Use actual device for DMA transfers
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH] spi: qup: remove unnecessary goto
  • From: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@xxxxxxxxxx>
• [PATCH RFC] spi: add Renesas RPC-IF driver
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH RFC 2/2] mfd: add Renesas RPC-IF driver
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH RFC 1/2] dt-bindings: mfd: document Renesas RPC-IF bindings
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH RFC 0/2] Add Renesas RPC-IF support
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH v2] spi/acpi: enumerate all SPI slaves in the namespace
  • From: Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx>
• Re: [PATCH v6 3/3] spi: Add spi driver for Socionext Synquacer platform
  • From: Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx>
• [PATCH 5.1 236/405] spi: Dont call spi_get_gpio_descs() before device name is set
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Applied "spidev: Add M53Menlo CPLD compatible" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] spidev: Add M53Menlo CPLD compatible
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [RFC PATCH] spi/acpi: enumerate all SPI slaves in the namespace
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/4] mtd: rawnand: Add Macronix MX25F0A NAND controller
  • From: masonccyang@xxxxxxxxxxx
• [RFC PATCH] spi/acpi: enumerate all SPI slaves in the namespace
  • From: Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx>
• Applied "spi: sh-msiof: Reduce delays in sh_msiof_modify_ctr_wait()" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: spi-meson-spifc: update with SPDX Licence identifier" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• Re: [PATCH V1 00/12] LP0 entry and exit support for Tegra210
  • From: Billy Laws <blaws05@xxxxxxxxx>
• [PATCH v6 3/3] spi: Add spi driver for Socionext Synquacer platform
  • From: Masahisa Kojima <masahisa.kojima@xxxxxxxxxx>
• [PATCH v6 2/3] dt-bindings: spi: Add DT bindings for Synquacer
  • From: Masahisa Kojima <masahisa.kojima@xxxxxxxxxx>
• [PATCH v6 1/3] MAINTAINERS: Add entry for Synquacer SPI driver
  • From: Masahisa Kojima <masahisa.kojima@xxxxxxxxxx>
• [PATCH v6 0/3] spi: support for Socionext Synquacer platform
  • From: Masahisa Kojima <masahisa.kojima@xxxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH v2] spi: spi-meson-spifc: update with SPDX Licence identifier
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• Re: 5.2-rc1 on droid4: spi crash
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: 5.2-rc1 on droid4: spi crash
  • From: Noralf Trønnes <notro@xxxxxxxxxxx>
• Re: [PATCH v3 2/4] mtd: rawnand: Add Macronix MX25F0A NAND controller
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH] spi: sh-msiof: Reduce delays in sh_msiof_modify_ctr_wait()
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• Re: [PATCH v5 3/3] spi: Add spi driver for Socionext Synquacer platform
  • From: Masahisa Kojima <masahisa.kojima@xxxxxxxxxx>
• Re: 5.2-rc1 on droid4: spi crash
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] spi: gpio: fix warning PTR_ERR_OR_ZERO can be used
  • From: Hariprasad Kelam <hariprasad.kelam@xxxxxxxxx>
• Re: [RFC v2 00/11] DVFS in the OPP core
  • From: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
• Applied "spi: tegra114: set master cleanup and also invoke it on probe error" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: Allow SPI devices to request the pumping thread be realtime" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: dt-bindings: Convert Arm pl022 to json-schema" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: spi-fsl-spi: call spi_finalize_current_message() at the end" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: abort spi_sync if failed to prepare_transfer_hardware" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: dt-bindings: Convert spi-gpio binding to json-schema" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v4 2/3] spi: Allow SPI devices to request the pumping thread be realtime
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v13 3/3] dt-bindings: mfd: Document Renesas R-Car Gen3 RPC-IF controller bindings
  • From: masonccyang@xxxxxxxxxxx
• Re: [PATCH v3 2/4] mtd: rawnand: Add Macronix MX25F0A NAND controller
  • From: masonccyang@xxxxxxxxxxx
• Re: [PATCH v4 11/14] dmaengine: imx-sdma: fix ecspi1 rx dma not work on i.mx8mm
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v5 3/3] spi: Add spi driver for Socionext Synquacer platform
  • From: Masahisa Kojima <masahisa.kojima@xxxxxxxxxx>
• RE:Re: [PATCH v4 00/14] add ecspi ERR009165 for i.mx6/7 soc family
  • From: Robin Gong <yibin.gong@xxxxxxx>
• RE: [EXT] Re: [PATCH v4 10/14] dma: imx-sdma: add i.mx6ul/6sx compatible name
  • From: Robin Gong <yibin.gong@xxxxxxx>
• Re: [PATCH V1 00/12] LP0 entry and exit support for Tegra210
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• [PATCH V1] spi: tegra114: set master cleanup and also invoke it on probe error
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• [PATCH V1 00/12] LP0 entry and exit support for Tegra210
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• Re: [PATCH V5 4/4] spi: tegra114: add support for TX and RX trimmers
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• Re: [PATCH V5 4/4] spi: tegra114: add support for TX and RX trimmers
  • From: Nathan Chancellor <natechancellor@xxxxxxxxx>
• [PATCH AUTOSEL 5.1 039/375] spi: pxa2xx: fix SCR (divisor) calculation
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.1 037/375] spi: atmel-quadspi: fix crash while suspending
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 026/244] spi: pxa2xx: fix SCR (divisor) calculation
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 017/167] spi: pxa2xx: fix SCR (divisor) calculation
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 010/114] spi: pxa2xx: fix SCR (divisor) calculation
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 06/92] spi: pxa2xx: fix SCR (divisor) calculation
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.0 034/317] spi: pxa2xx: fix SCR (divisor) calculation
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.0 032/317] spi: atmel-quadspi: fix crash while suspending
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH v12 3/3] dt-bindings: mfd: Document Renesas R-Car Gen3 RPC-IF MFD bindings
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v12 3/3] dt-bindings: mfd: Document Renesas R-Car Gen3 RPC-IF MFD bindings
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v12 3/3] dt-bindings: mfd: Document Renesas R-Car Gen3 RPC-IF MFD bindings
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v13 3/3] dt-bindings: mfd: Document Renesas R-Car Gen3 RPC-IF controller bindings
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v12 3/3] dt-bindings: mfd: Document Renesas R-Car Gen3 RPC-IF MFD bindings
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 10/14] dma: imx-sdma: add i.mx6ul/6sx compatible name
  • From: Rob Herring <robh@xxxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• Re: [PATCH] spi: dt-bindings: Convert Arm pl022 to json-schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v5 3/3] spi: Add spi driver for Socionext Synquacer platform
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] spi: spi-fsl-spi: call spi_finalize_current_message() at the end
  • From: Christophe Leroy <christophe.leroy@xxxxxx>
• Re: [PATCH] spi: dt-bindings: Convert Arm pl022 to json-schema
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• Re: [PATCH v4 00/14] add ecspi ERR009165 for i.mx6/7 soc family
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH v4 11/14] dmaengine: imx-sdma: fix ecspi1 rx dma not work on i.mx8mm
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v4 12/14] ARM: dts: imx6ul: add dma support on ecspi
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v4 13/14] ARM: dts: imx6sll: correct sdma compatible
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v4 14/14] arm64: defconfig: Enable SDMA on i.mx8mq/8mm
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v4 10/14] dma: imx-sdma: add i.mx6ul/6sx compatible name
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v4 09/14] dmaengine: imx-sdma: remove ERR009165 on i.mx6ul
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v4 08/14] spi: imx: add new i.mx6ul compatible name in binding doc
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v4 07/14] spi: imx: remove ERR009165 workaround on i.mx6ul
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v4 06/14] spi: imx: fix ERR009165
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v4 04/14] dmaengine: imx-sdma: remove dupilicated sdma_load_context
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v4 05/14] dmaengine: imx-sdma: add mcu_2_ecspi script
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v4 03/14] Revert "dmaengine: imx-sdma: refine to load context only once"
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v4 02/14] Revert "ARM: dts: imx6: Use correct SDMA script for SPI cores"
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v4 01/14] Revert "ARM: dts: imx6q: Use correct SDMA script for SPI5 core"
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v4 00/14] add ecspi ERR009165 for i.mx6/7 soc family
  • From: Robin Gong <yibin.gong@xxxxxxx>
• Re: [PATCH v5 3/3] spi: Add spi driver for Socionext Synquacer platform
  • From: Masahisa Kojima <masahisa.kojima@xxxxxxxxxx>
• [PATCH] spi: dt-bindings: Convert spi-gpio binding to json-schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] spi: dt-bindings: Convert Arm pl022 to json-schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] spi: spi-meson-spifc: update with SPDX Licence identifier
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: zynqmp: Fix build break
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Patchwork summary for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• Applied "spi: Add YAML schemas for the generic SPI options" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: sun6i: Add YAML schemas" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: sun4i: Add YAML schemas" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: spidev: Add dhcom-board to compatibility list" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v5 3/3] spi: Add spi driver for Socionext Synquacer platform
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v5 3/3] spi: Add spi driver for Socionext Synquacer platform
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v5 3/3] spi: Add spi driver for Socionext Synquacer platform
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 4/4] ARM: dts: sun6i: Add default address and size cells for SPI
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxx>
• Re: [PATCH v5 3/3] spi: Add spi driver for Socionext Synquacer platform
  • From: Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx>
• [PATCH v5 3/3] spi: Add spi driver for Socionext Synquacer platform
  • From: Masahisa Kojima <masahisa.kojima@xxxxxxxxxx>
• [PATCH v5 2/3] dt-bindings: spi: Add DT bindings for Synquacer
  • From: Masahisa Kojima <masahisa.kojima@xxxxxxxxxx>
• [PATCH v5 1/3] MAINTAINERS: Add entry for Synquacer SPI driver
  • From: Masahisa Kojima <masahisa.kojima@xxxxxxxxxx>
• [PATCH v5 0/3] spi: support for Socionext Synquacer platform
  • From: Masahisa Kojima <masahisa.kojima@xxxxxxxxxx>
• Re: [PATCH v4 2/3] spi: Allow SPI devices to request the pumping thread be realtime
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH v13 0/3] mfd: Add Renesas R-Car Gen3 RPC-IF MFD & SPI driver
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• [PATCH v13 2/3] spi: Add Renesas R-Car Gen3 RPC-IF SPI controller driver
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• [PATCH v13 3/3] dt-bindings: mfd: Document Renesas R-Car Gen3 RPC-IF controller bindings
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• [PATCH v13 1/3] mfd: Add Renesas R-Car Gen3 RPC-IF MFD driver
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• Re: [RFC v2 00/11] DVFS in the OPP core
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: Re: Re: [PATCH v3 11/14] dmaengine: imx-sdma: fix ecspi1 rx dma not work on i.mx8mm
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• RE: Re: Re: [PATCH v3 11/14] dmaengine: imx-sdma: fix ecspi1 rx dma not work on i.mx8mm
  • From: Robin Gong <yibin.gong@xxxxxxx>
• Re: Re: [PATCH v3 11/14] dmaengine: imx-sdma: fix ecspi1 rx dma not work on i.mx8mm
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• RE: Re: [PATCH v3 11/14] dmaengine: imx-sdma: fix ecspi1 rx dma not work on i.mx8mm
  • From: Robin Gong <yibin.gong@xxxxxxx>
• Re: [PATCH] spi: bcm2835: Drop assignment of dma_slave_config direction
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v3 11/14] dmaengine: imx-sdma: fix ecspi1 rx dma not work on i.mx8mm
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v3 09/14] dmaengine: imx-sdma: remove ERR009165 on i.mx6ul
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v3 05/14] dmaengine: imx-sdma: add mcu_2_ecspi script
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v3 04/14] dmaengine: imx-sdma: remove dupilicated sdma_load_context
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v12 3/3] dt-bindings: mfd: Document Renesas R-Car Gen3 RPC-IF MFD bindings
  • From: masonccyang@xxxxxxxxxxx
• Re: [PATCH v3 3/4] dt-bindings: spi: sun6i: Add YAML schemas
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH v3 2/4] dt-bindings: spi: sun4i: Add YAML schemas
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH v3 1/4] dt-bindings: spi: Add YAML schemas for the generic SPI options
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• [PATCH v3 4/4] ARM: dts: sun6i: Add default address and size cells for SPI
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxx>
• [PATCH v3 1/4] dt-bindings: spi: Add YAML schemas for the generic SPI options
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxx>
• [PATCH v3 3/4] dt-bindings: spi: sun6i: Add YAML schemas
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxx>
• [PATCH v3 2/4] dt-bindings: spi: sun4i: Add YAML schemas
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxx>
• [PATCH] spi: spi-meson-spifc: update with SPDX Licence identifier
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• Re: [PATCH v3 2/4] mtd: rawnand: Add Macronix MX25F0A NAND controller
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH v12 3/3] dt-bindings: mfd: Document Renesas R-Car Gen3 RPC-IF MFD bindings
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v12 3/3] dt-bindings: mfd: Document Renesas R-Car Gen3 RPC-IF MFD bindings
  • From: masonccyang@xxxxxxxxxxx
• RE: [PATCH] spi: spidev: Add dhcom-board to compatibility list [Klartext]
  • From: "Christoph Niedermaier" <cniedermaier@xxxxxxxxxxxxxxxxxx>
• Re: [EXT] Re: [PATCH v3 00/14] add ecspi ERR009165 for i.mx6/7 soc family
  • From: Robin Gong <yibin.gong@xxxxxxx>
• Re: [PATCH v3 2/4] mtd: rawnand: Add Macronix MX25F0A NAND controller
  • From: masonccyang@xxxxxxxxxxx
• Re: [PATCH] spi: spidev: Add dhcom-board to compatibility list [Klartext]
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: bitbang: Fix NULL pointer dereference in spi_unregister_master
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• Re: [PATCH] spi: spidev: Add dhcom-board to compatibility list [Klartext]
  • From: "Christoph Niedermaier" <cniedermaier@xxxxxxxxxxxxxxxxxx>
• Applied "ASoC: tlv320aic3x: Add support for high power analog output" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: spidev: Add dhcom-board to compatibility list [Klartext]
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• [PATCH] spi: spidev: Add dhcom-board to compatibility list [Klartext]
  • From: Christoph Niedermaier <cniedermaier@xxxxxxxxxxxxxxxxxx>
• Applied "spi: bitbang: Fix NULL pointer dereference in spi_unregister_master" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: bitbang: Fix NULL pointer dereference in spi_unregister_master
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: bitbang: Fix NULL pointer dereference in spi_unregister_master
  • From: Mukesh Ojha <mojha@xxxxxxxxxxxxxx>
• Re: [PATCH] spi: bitbang: Fix NULL pointer dereference in spi_unregister_master
  • From: Axel Lin <axel.lin@xxxxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: spi: Add YAML schemas for the generic SPI options
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxx>
• Re: [PATCH] spi: bitbang: Fix NULL pointer dereference in spi_unregister_master
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH] spi: bitbang: Fix NULL pointer dereference in spi_unregister_master
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH v4 2/3] spi: Allow SPI devices to request the pumping thread be realtime
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v4 0/3] spi: A better solution for cros_ec_spi reliability
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v3 2/4] mtd: rawnand: Add Macronix MX25F0A NAND controller
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Applied "spi: tegra114: add support for hw based cs" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: tegra114: add support for TX and RX trimmers" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: tegra114: add support for HW CS timing" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: tegra114: add support for gpio based CS" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH V5 1/4] spi: tegra114: add support for gpio based CS
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• Re: [PATCH V5 1/4] spi: tegra114: add support for gpio based CS
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH V5 1/4] spi: tegra114: add support for gpio based CS
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH V5 1/4] spi: tegra114: add support for gpio based CS
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v3 2/4] mtd: rawnand: Add Macronix MX25F0A NAND controller
  • From: masonccyang@xxxxxxxxxxx
• Re: [PATCH v3 2/4] mtd: rawnand: Add Macronix MX25F0A NAND controller
  • From: masonccyang@xxxxxxxxxxx
• Re: [PATCH v3 4/4] dt-bindings: mfd: Document Macronix MX25F0A controller bindings
  • From: masonccyang@xxxxxxxxxxx
• Re: [PATCH v12 2/3] spi: Add Renesas R-Car Gen3 RPC-IF SPI controller driver
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v3 1/4] mfd: Add Macronix MX25F0A MFD controller driver
  • From: masonccyang@xxxxxxxxxxx
• Re: [PATCH v12 2/3] spi: Add Renesas R-Car Gen3 RPC-IF SPI controller driver
  • From: masonccyang@xxxxxxxxxxx
• Re: [PATCH v12 3/3] dt-bindings: mfd: Document Renesas R-Car Gen3 RPC-IF MFD bindings
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/3] spi: Allow SPI devices to request the pumping thread be realtime
  • From: Guenter Roeck <groeck@xxxxxxxxxx>
• Re: [PATCH v9 2/3] spi: Add Renesas R-Car Gen3 RPC-IF SPI controller driver
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v9 2/3] spi: Add Renesas R-Car Gen3 RPC-IF SPI controller driver
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH v3 2/3] spi: Allow SPI devices to request the pumping thread be realtime
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v3 0/3] spi: A better solution for cros_ec_spi reliability
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH V5 1/4] spi: tegra114: add support for gpio based CS
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• RE: [PATCH V5 1/4] spi: tegra114: add support for gpio based CS
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• Re: [PATCH 1/4] spi: For controllers that need realtime always use the pump thread
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 1/4] spi: For controllers that need realtime always use the pump thread
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v12 3/3] dt-bindings: mfd: Document Renesas R-Car Gen3 RPC-IF MFD bindings
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v12 3/3] dt-bindings: mfd: Document Renesas R-Car Gen3 RPC-IF MFD bindings
  • From: masonccyang@xxxxxxxxxxx
• Re: [PATCH v12 3/3] dt-bindings: mfd: Document Renesas R-Car Gen3 RPC-IF MFD bindings
  • From: masonccyang@xxxxxxxxxxx
• Re: [PATCH V5 1/4] spi: tegra114: add support for gpio based CS
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [PATCH 1/4] spi: For controllers that need realtime always use the pump thread
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [RFC v2 08/11] arm64: dts: sdm845: Add ufs opps and power-domains
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH v12 2/3] spi: Add Renesas R-Car Gen3 RPC-IF SPI controller driver
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH V5 2/4] spi: tegra114: add support for hw based cs
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• [PATCH V5 1/4] spi: tegra114: add support for gpio based CS
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• [PATCH V5 3/4] spi: tegra114: add support for HW CS timing
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• [PATCH V5 4/4] spi: tegra114: add support for TX and RX trimmers
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• [PATCH V5 0/4] additional features to Tegra SPI
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• [PATCH V4 0/4] additional features to Tegra SPI
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• [PATCH V4 1/4] spi: tegra114: add support for gpio based CS
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• [PATCH V4 3/4] spi: tegra114: add support for HW CS timing
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• [PATCH V4 2/4] spi: tegra114: add support for hw based cs
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• [PATCH V4 4/4] spi: tegra114: add support for TX and RX trimmers
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• Re: [PATCH v12 3/3] dt-bindings: mfd: Document Renesas R-Car Gen3 RPC-IF MFD bindings
  • From: masonccyang@xxxxxxxxxxx
• Re: [PATCH 1/4] spi: For controllers that need realtime always use the pump thread
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v2 1/3] spi: Allow SPI devices to force transfers on a realtime thread
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• [PATCH v2 0/3] spi: A better solution for cros_ec_spi reliability
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v12 3/3] dt-bindings: mfd: Document Renesas R-Car Gen3 RPC-IF MFD bindings
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: Regression: spi: core: avoid waking pump thread from spi_sync instead run teardown delayed
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v3 08/14] dt-bindings: spi: imx: add new i.mx6ul compatible name
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 4/5] spi: bcm2835: support effective_speed_hz
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [resend] [PATCH 5/5] spi: bcm2835aux: support effective_speed_hz
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] spi: bcm2835: Drop assignment of dma_slave_config direction
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• [PATCH] spi: bcm2835: Replace spi_master by spi_controller
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH v12 3/3] dt-bindings: mfd: Document Renesas R-Car Gen3 RPC-IF MFD bindings
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Applied "spi: bcm2835: Remove spi_alloc_master() error printing" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: bcm2835aux: Remove spi_alloc_master() error printing" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: bcm2835: only split transfers that exceed DLEN if DMA available" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: core: allow reporting the effectivly used speed_hz for a transfer" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: core: Fix build" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v3 00/14] add ecspi ERR009165 for i.mx6/7 soc family
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: Regression: spi: core: avoid waking pump thread from spi_sync instead run teardown delayed
  • From: kernel@xxxxxxxxxxxxxxxx
• Re: [PATCH v12 3/3] dt-bindings: mfd: Document Renesas R-Car Gen3 RPC-IF MFD bindings
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: Applied "dt-bindings: mfd: atmel-usart: add DMA bindings for USART in SPI mode" to the spi tree
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] spi: Added driver for CP2130 USB-to-SPI bridge
  • From: Jochen Henneberg <jh@xxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/4] spi: For controllers that need realtime always use the pump thread
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 2/4] spi: Allow SPI devices to specify that they are timing sensitive
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v3 08/14] dt-bindings: spi: imx: add new i.mx6ul compatible name
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v3 07/14] spi: imx: remove ERR009165 workaround on i.mx6ul
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v3 06/14] spi: imx: fix ERR009165
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: Applied "dt-bindings: mfd: atmel-usart: add DMA bindings for USART in SPI mode" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [spi:for-5.3 12/13] drivers//spi/spi.c:1134:12: error: 'struct spi_transfer' has no member named 'effective_speed_hz'
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: Regression: spi: core: avoid waking pump thread from spi_sync instead run teardown delayed
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: Added driver for CP2130 USB-to-SPI bridge
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v3 4/4] dt-bindings: mfd: Document Macronix MX25F0A controller bindings
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH v3 2/4] mtd: rawnand: Add Macronix MX25F0A NAND controller
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH v3 1/4] mfd: Add Macronix MX25F0A MFD controller driver
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH V3 5/9] spi: export spi core function spi_set_cs
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: Applied "spi: Add spi_is_bpw_supported()" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 2/4] spi: Allow SPI devices to specify that they are timing sensitive
  • From: Guenter Roeck <groeck@xxxxxxxxxx>
• Re: [PATCH 1/4] spi: For controllers that need realtime always use the pump thread
  • From: Guenter Roeck <groeck@xxxxxxxxxx>
• [PATCH 1/4] spi: For controllers that need realtime always use the pump thread
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• [PATCH 2/4] spi: Allow SPI devices to specify that they are timing sensitive
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• [PATCH 0/4] spi: A better solution for cros_ec_spi reliability
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• RE: [PATCH V3 5/9] spi: export spi core function spi_set_cs
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: spi: Add YAML schemas for the generic SPI options
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH] spi: bcm2835aux: Remove spi_alloc_master() error printing
  • From: Martin Sperl <martin@xxxxxxxxx>
• Re: [PATCH] spi: bcm2835: Remove spi_alloc_master() error printing
  • From: Martin Sperl <martin@xxxxxxxxx>
• Re: [PATCH] spi: bcm2835aux: Remove spi_alloc_master() error printing
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] spi: bcm2835: Remove spi_alloc_master() error printing
  • From: Hoan <na-hoan@xxxxxxxxxxx>
• [PATCH] spi: bcm2835aux: Remove spi_alloc_master() error printing
  • From: Nguyen An Hoan <na-hoan@xxxxxxxxxxx>
• Re: [PATCH] spi: bcm2835: Remove spi_alloc_master() error printing
  • From: Stefan Wahren <stefan.wahren@xxxxxxxx>
• Re: [PATCH] spi: bcm2835: Remove spi_alloc_master() error printing
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH] spi: bcm2835: Remove spi_alloc_master() error printing
  • From: Nguyen An Hoan <na-hoan@xxxxxxxxxxx>
• Re: [PATCH] spi: Allow selecting BCM2835 SPI controllers on ARCH_BRCMSTB
  • From: Eric Anholt <eric@xxxxxxxxxx>
• [PATCH] spi: Allow selecting BCM2835 SPI controllers on ARCH_BRCMSTB
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: Regression: spi: core: avoid waking pump thread from spi_sync instead run teardown delayed
  • From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
• Re: [PATCH v12 3/3] dt-bindings: mfd: Document Renesas R-Car Gen3 RPC-IF MFD bindings
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: Applied "spi: Add spi_is_bpw_supported()" to the spi tree
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• [PATCH] spi: bcm2835: only split transfers that exceed DLEN if DMA available
  • From: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
• Re: [PATCH V1 1/3] spi: core: resource: fix memory leak on error and place in "correct" sequence
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• Re: [PATCH V1 1/3] spi: core: resource: fix memory leak on error and place in "correct" sequence
  • From: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
• Re: [PATCH] spi: Fix Raspberry Pi breakage
  • From: kernel@xxxxxxxxxxxxxxxx
• [PATCH V1 3/3] spi: core: make unprepare_message part of spi_message.resource process
  • From: kernel@xxxxxxxxxxxxxxxx
• [PATCH V1 2/3] spi: core: add a warning when prepare_message uses spi_res and unprepare_message
  • From: kernel@xxxxxxxxxxxxxxxx
• [PATCH V1 1/3] spi: core: resource: fix memory leak on error and place in "correct" sequence
  • From: kernel@xxxxxxxxxxxxxxxx
• [PATCH V1 0/3] spi: core: correct ordering of unprepare and resources
  • From: kernel@xxxxxxxxxxxxxxxx
• [PATCH v2 4/4] ARM: dts: sun6i: Add default address and size cells for SPI
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxx>
• [PATCH v2 3/4] dt-bindings: spi: sun6i: Add YAML schemas
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxx>
• [PATCH v2 2/4] dt-bindings: spi: sun4i: Add YAML schemas
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxx>
• [PATCH v2 1/4] dt-bindings: spi: Add YAML schemas for the generic SPI options
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxx>
• Re: [PATCH] spi: Added driver for CP2130 USB-to-SPI bridge
  • From: Jochen Henneberg <jh@xxxxxxxxxxxxxxxxxxxxxxxxxx>
• Applied "spi: Fix Raspberry Pi breakage" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] spi: Fix Raspberry Pi breakage
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: SPI regression with today's build
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: SPI regression with today's build
  • From: kernel@xxxxxxxxxxxxxxxx
• Re: SPI regression with today's build
  • From: kernel@xxxxxxxxxxxxxxxx
• Re: SPI regression with today's build
  • From: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
• Re: SPI regression with today's build
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• Re: SPI regression with today's build
  • From: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
• SPI regression with today's build
  • From: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
• [spi:for-5.3 12/13] drivers//spi/spi.c:1134:12: error: 'struct spi_transfer' has no member named 'effective_speed_hz'
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH 2/2] spi: fsl: Convert to use CS GPIO descriptors
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH V2 5/6] spi: bcm2835: make the lower limit for dma mode configurable
  • From: kernel@xxxxxxxxxxxxxxxx
• Re: Applied "dt-bindings: mfd: atmel-usart: add DMA bindings for USART in SPI mode" to the spi tree
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Applied "spi: rockchip: turn down tx dma bursts" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [GIT PULL] spi updates for v5.2
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [GIT PULL] spi updates for v5.2
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• Re: [GIT PULL] spi updates for v5.2
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• RE: [EXT] Re: [PATCH v3 10/14] dt-bindings: dma: imx-sdma: add i.mx6ul/6sx compatible name
  • From: Robin Gong <yibin.gong@xxxxxxx>
• Applied "spi: core: allow defining time that cs is deasserted" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: core: allow defining time that cs is deasserted as a multiple of SCK" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: bcm2835: add driver stats to debugfs" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: at91-usart: add DMA support" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "dt-bindings: mfd: atmel-usart: add DMA bindings for USART in SPI mode" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: ep93xx: Drop unused variable" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: bcm2835: bcm2835_spi_transfer_one_poll remove unnecessary argument" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: bcm2835: added comment about different bus behaviour of DMA mode" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: bcm2835: Avoid 64-bit arithmetic in xfer len calc" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: bcm2835: make the polling duration limits configurable" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 2/2] spi: fsl: Convert to use CS GPIO descriptors
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH V2 5/6] spi: bcm2835: make the lower limit for dma mode configurable
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH V2 1/6] spi: bcm2835: bcm2835_spi_transfer_one_poll remove unnecessary argument
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: New driver for CP2130 USB-to-SPI bridge
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: Added driver for CP2130 USB-to-SPI bridge
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: spi: Add YAML schemas for the generic SPI options
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [GIT PULL] spi updates for v5.2
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [GIT PULL] spi updates for v5.2
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v12 3/3] dt-bindings: mfd: Document Renesas R-Car Gen3 RPC-IF MFD bindings
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v12 3/3] dt-bindings: mfd: Document Renesas R-Car Gen3 RPC-IF MFD bindings
  • From: Marek Vasut <marek.vasut@xxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: spi: Add YAML schemas for the generic SPI options
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: spi: Add YAML schemas for the generic SPI options
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxx>
• Re: [PATCH v3 10/14] dt-bindings: dma: imx-sdma: add i.mx6ul/6sx compatible name
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [GIT PULL] spi updates for v5.2
  • From: pr-tracker-bot@xxxxxxxxxx
• Re: [GIT PULL] spi updates for v5.2
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/4] dt-bindings: spi: sun6i: Add YAML schemas
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: spi: Add YAML schemas for the generic SPI options
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• [PATCH 4/4] ARM: dts: sun6i: Add default address and size cells for SPI
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxx>
• [PATCH 3/4] dt-bindings: spi: sun6i: Add YAML schemas
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxx>
• [PATCH 2/4] dt-bindings: spi: sun4i: Add YAML schemas
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxx>
• [PATCH 1/4] dt-bindings: spi: Add YAML schemas for the generic SPI options
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxx>
• Re: [PATCH v12 3/3] dt-bindings: mfd: Document Renesas R-Car Gen3 RPC-IF MFD bindings
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [GIT PULL] spi updates for v5.2
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [GIT PULL] spi updates for v5.2
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 3/5] spi: core: allow defining time that cs is deasserted as a multiple of SCK
  • From: kernel@xxxxxxxxxxxxxxxx
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH v3 11/14] dmaengine: imx-sdma: fix ecspi1 rx dma not work on i.mx8mm
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v3 07/14] spi: imx: remove ERR009165 workaround on i.mx6ul
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v3 06/14] spi: imx: fix ERR009165
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v3 10/14] dt-bindings: dma: imx-sdma: add i.mx6ul/6sx compatible name
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v3 12/14] ARM: dts: imx6ul: add dma support on ecspi
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v3 14/14] arm64: defconfig: Enable SDMA on i.mx8mq/8mm
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v3 13/14] ARM: dts: imx6sll: correct sdma compatible
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v3 09/14] dmaengine: imx-sdma: remove ERR009165 on i.mx6ul
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v3 08/14] dt-bindings: spi: imx: add new i.mx6ul compatible name
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v3 05/14] dmaengine: imx-sdma: add mcu_2_ecspi script
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v3 04/14] dmaengine: imx-sdma: remove dupilicated sdma_load_context
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v3 03/14] Revert "dmaengine: imx-sdma: refine to load context only once"
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v3 02/14] Revert "ARM: dts: imx6: Use correct SDMA script for SPI cores"
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v3 01/14] Revert "ARM: dts: imx6q: Use correct SDMA script for SPI5 core"
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v3 00/14] add ecspi ERR009165 for i.mx6/7 soc family
  • From: Robin Gong <yibin.gong@xxxxxxx>
• Re: [GIT PULL] spi updates for v5.2
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• Re: [GIT PULL] spi updates for v5.2
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [GIT PULL] spi updates for v5.2
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [GIT PULL] spi updates for v5.2
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• Re: [GIT PULL] spi updates for v5.2
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [GIT PULL] spi updates for v5.2
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• [PATCH] spi: atmel-quadspi: void return type for atmel_qspi_init()
  • From: <Tudor.Ambarus@xxxxxxxxxxxxx>
• [GIT PULL] spi updates for v5.2
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] spi: Added driver for CP2130 USB-to-SPI bridge
  • From: Jochen Henneberg <jh@xxxxxxxxxxxxxxxxxxxxxxxxxx>
• New driver for CP2130 USB-to-SPI bridge
  • From: Jochen Henneberg <jh@xxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH V3 5/9] spi: export spi core function spi_set_cs
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH V3 3/9] spi: add SPI_LSBYTE_FIRST mode
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: mfd: atmel-usart: add DMA bindings for USART in SPI mode
  • From: Radu Pirea <radu_nicolae.pirea@xxxxxx>
• [PATCH v2 2/2] spi: at91-usart: add DMA support
  • From: Radu Pirea <radu_nicolae.pirea@xxxxxx>
• [PATCH v2 0/2] DMA support for AT91 USART in SPI mode
  • From: Radu Pirea <radu_nicolae.pirea@xxxxxx>
• RE: [EXT] Re: [PATCH v2 08/15] dt-bindings: spi: imx: add i.mx6ul to state errata fixed
  • From: Robin Gong <yibin.gong@xxxxxxx>
• RE: [EXT] Re: [PATCH v2 08/15] dt-bindings: spi: imx: add i.mx6ul to state errata fixed
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH] spi: ep93xx: Drop unused variable
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2 08/15] dt-bindings: spi: imx: add i.mx6ul to state errata fixed
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• Re: [PATCH 0/3] spi: SPI bus multiplexer
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: Applied "spi: tegra114: fix PIO transfer" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v3 3/4] spi: Patch Macronix SPI controller driver according to MX25F0A MFD driver
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: Clear SPI_CS_HIGH flag from bad_bits for GPIO chip-select" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: ep93xx: Convert to use CS GPIO descriptors" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: tegra114: fix PIO transfer" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: rspi: Fix handling of QSPI code when transmit and receive" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: stm32: return the get_irq error" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: stm32-qspi: manage the get_irq error case" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: expand mode support" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: pxa2xx: Add support for Intel Comet Lake" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: pxa2xx: use a module softdep for dw_dmac" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: spi-mem: Fix build error without CONFIG_SPI_MEM" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: spi-mem: zynq-qspi: Fix build error on architectures missing readsl/writesl" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: spi-mem: Make spi_mem_default_supports_op() static inline" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: Remove one needless transfer speed fall back case" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: pxa2xx: fix SCR (divisor) calculation" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: sh-msiof: Document r8a77470 bindings" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "dt-bindings: spi: spi-mt65xx: add support for MT8516" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: AD ASoC: declare missing of table" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: atmel-quadspi: fix crash while suspending" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: Applied "spi: sh-msiof: Document r8a77470 bindings" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 10/15] dt-bindings: dma: imx-sdma: add i.mx6ul/6sx compatible name
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 08/15] dt-bindings: spi: imx: add i.mx6ul to state errata fixed
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: Applied "spi: sh-msiof: Document r8a77470 bindings" to the spi tree
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• RE: [PATCH V3 5/9] spi: export spi core function spi_set_cs
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• RE: Applied "spi: tegra114: fix PIO transfer" to the spi tree
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: spi: Add spi-mux-gpio
  • From: Rob Herring <robh@xxxxxxxxxx>