Linux SPI

• Thread Index

• RE: [PATCH V3 3/9] spi: add SPI_LSBYTE_FIRST mode
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• Re: [PATCH v3 4/4] dt-bindings: mfd: Document Macronix MX25F0A controller bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] spi: Clear SPI_CS_HIGH flag from bad_bits for GPIO chip-select
  • From: Serge Semin <fancer.lancer@xxxxxxxxx>
• Applied "spi: ep93xx: Convert to use CS GPIO descriptors" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [EXT] Re: [PATCH v2 06/15] spi: imx: fix ERR009165
  • From: Robin Gong <yibin.gong@xxxxxxx>
• Re: [EXT] Re: [PATCH v2 06/15] spi: imx: fix ERR009165
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [EXT] Re: [PATCH v2 07/15] spi: imx: remove ERR009165 workaround on i.mx6ul
  • From: Robin Gong <yibin.gong@xxxxxxx>
• Re: [EXT] Re: [PATCH v2 06/15] spi: imx: fix ERR009165
  • From: Robin Gong <yibin.gong@xxxxxxx>
• Re: [PATCH v2 07/15] spi: imx: remove ERR009165 workaround on i.mx6ul
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH v2 06/15] spi: imx: fix ERR009165
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [EXT] Re: [PATCH v2 00/15] add ecspi ERR009165 for i.mx6/7 soc family
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [EXT] Re: [PATCH v2 00/15] add ecspi ERR009165 for i.mx6/7 soc family
  • From: Robin Gong <yibin.gong@xxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• Re: [PATCH v2 00/15] add ecspi ERR009165 for i.mx6/7 soc family
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH v2 04/15] dmaengine: imx-sdma: remove dupilicated sdma_load_context
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v2 01/15] Revert "ARM: dts: imx6q: Use correct SDMA script for SPI5 core"
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v2 05/15] dmaengine: imx-sdma: add mcu_2_ecspi script
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v2 02/15] Revert "ARM: dts: imx6: Use correct SDMA script for SPI cores"
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v2 12/15] ARM64: dts: freescale: imx8mm/8mq: update new compatible name for ecspi and sdma
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v2 07/15] spi: imx: remove ERR009165 workaround on i.mx6ul
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v2 14/15] ARM: dts: imx6sll: correct ecspi/sdma compatible
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v2 13/15] ARM: dts: imx6ul: add dma support on ecspi
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v2 15/15] arm64: defconfig: Enable SDMA on i.mx8mq/8mm
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v2 11/15] dmaengine: imx-sdma: fix ecspi1 rx dma not work on i.mx8mm
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v2 08/15] dt-bindings: spi: imx: add i.mx6ul to state errata fixed
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v2 10/15] dt-bindings: dma: imx-sdma: add i.mx6ul/6sx compatible name
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v2 09/15] dmaengine: imx-sdma: remove ERR009165 on i.mx6ul
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v2 06/15] spi: imx: fix ERR009165
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v2 03/15] Revert "dmaengine: imx-sdma: refine to load context only once"
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v2 00/15] add ecspi ERR009165 for i.mx6/7 soc family
  • From: Robin Gong <yibin.gong@xxxxxxx>
• Re: [PATCH v12 3/3] dt-bindings: mfd: Document Renesas R-Car Gen3 RPC-IF MFD bindings
  • From: Marek Vasut <marek.vasut@xxxxxxxxx>
• Re: [PATCH v12 3/3] dt-bindings: mfd: Document Renesas R-Car Gen3 RPC-IF MFD bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 14/24] clk: mediatek: add clock driver for MT8516
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH 13/24] dt-bindings: mediatek: apmixedsys: add support for MT8516
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH 12/24] dt-bindings: mediatek: infracfg: add support for MT8516
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH 11/24] dt-bindings: mediatek: topckgen: add support for MT8516
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• Re: [PATCH] eeprom: at25: Convert the driver to the spi-mem interface
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Applied "spi: stm32-qspi: manage the get_irq error case" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: rspi: Fix handling of QSPI code when transmit and receive" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: AD ASoC: declare missing of table" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: spi-mem: zynq-qspi: Fix build error on architectures missing readsl/writesl" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: atmel-quadspi: fix crash while suspending" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: stm32: return the get_irq error" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: stm32-qspi: manage the get_irq error case" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: rspi: Fix handling of QSPI code when transmit and receive" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: stm32: return the get_irq error" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: AD ASoC: declare missing of table" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: spi-mem: zynq-qspi: Fix build error on architectures missing readsl/writesl" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: atmel-quadspi: fix crash while suspending" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 1/2] spi: Micrel eth switch: declare missing of table
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v12 3/3] dt-bindings: mfd: Document Renesas R-Car Gen3 RPC-IF MFD bindings
  • From: Marek Vasut <marek.vasut@xxxxxxxxx>
• Re: [PATCH v12 3/3] dt-bindings: mfd: Document Renesas R-Car Gen3 RPC-IF MFD bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] spi: stm32-qspi: manage the get_irq error case
  • From: Ludovic BARRE <ludovic.barre@xxxxxx>
• [PATCH] spi: stm32-qspi: manage the get_irq error case
  • From: Fabien Dessenne <fabien.dessenne@xxxxxx>
• Re: [PATCH] spi: stm32: return the get_irq error
  • From: Amelie DELAUNAY <amelie.delaunay@xxxxxx>
• [PATCH] spi: stm32: return the get_irq error
  • From: Fabien Dessenne <fabien.dessenne@xxxxxx>
• Re: [PATCH] spi: atmel-quadspi: fix crash while suspending
  • From: <Tudor.Ambarus@xxxxxxxxxxxxx>
• [PATCH] spi: atmel-quadspi: fix crash while suspending
  • From: <Claudiu.Beznea@xxxxxxxxxxxxx>
• Re: [EXT] Re: [PATCH v1 14/15] ARM: dts: imx6sll: correct ecspi/sdma compatible
  • From: Robin Gong <yibin.gong@xxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH v12 1/3] mfd: Add Renesas R-Car Gen3 RPC-IF MFD driver
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• [PATCH v12 2/3] spi: Add Renesas R-Car Gen3 RPC-IF SPI controller driver
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• [PATCH v12 3/3] dt-bindings: mfd: Document Renesas R-Car Gen3 RPC-IF MFD bindings
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• [PATCH v12 0/3] mfd: Add Renesas R-Car Gen3 RPC-IF MFD & SPI driver
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• Re: [PATCH V2 5/6] spi: bcm2835: make the lower limit for dma mode configurable
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH v1 14/15] ARM: dts: imx6sll: correct ecspi/sdma compatible
  • From: "s.hauer@xxxxxxxxxxxxxx" <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v1 07/15] spi: imx: remove ERR009165 workaround on i.mx6ul
  • From: "s.hauer@xxxxxxxxxxxxxx" <s.hauer@xxxxxxxxxxxxxx>
• Re: [EXT] Re: [PATCH v1 01/15] Revert "ARM: dts: imx6q: Use correct SDMA script for SPI5 core"
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH V2 6/6] spi: bcm2835: add driver stats to debugfs
  • From: kernel@xxxxxxxxxxxxxxxx
• [PATCH V2 5/6] spi: bcm2835: make the lower limit for dma mode configurable
  • From: kernel@xxxxxxxxxxxxxxxx
• [PATCH V2 4/6] spi: bcm2835: make the polling duration limits configurable
  • From: kernel@xxxxxxxxxxxxxxxx
• [PATCH V2 3/6] spi: bcm2835: added comment about different bus behaviour of DMA mode
  • From: kernel@xxxxxxxxxxxxxxxx
• [PATCH V2 2/6] spi: bcm2835: Avoid 64-bit arithmetic in xfer len calc
  • From: kernel@xxxxxxxxxxxxxxxx
• [PATCH V2 1/6] spi: bcm2835: bcm2835_spi_transfer_one_poll remove unnecessary argument
  • From: kernel@xxxxxxxxxxxxxxxx
• [PATCH V2 0/6] spi: bcm2835: improvements
  • From: kernel@xxxxxxxxxxxxxxxx
• Re: [PATCH 1/2] spi: Micrel eth switch: declare missing of table
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH] spi: bcm2835: Convert to use CS GPIO descriptors
  • From: kernel@xxxxxxxxxxxxxxxx
• Re: [PATCH v11 2/3] spi: Add Renesas R-Car Gen3 RPC-IF SPI controller driver
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 15/24] dt-bindings: pinctrl: pinctrl-mt65xx: add support for MT8516
  • From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
• Re: [PATCH v1 09/15] dmaengine: imx-sdma: remove ERR009165 on i.mx6ul
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: [PATCH v1 02/15] Revert "ARM: dts: imx6: Use correct SDMA script for SPI cores"
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: [PATCH v1 01/15] Revert "ARM: dts: imx6q: Use correct SDMA script for SPI5 core"
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• [PATCH v1 02/15] Revert "ARM: dts: imx6: Use correct SDMA script for SPI cores"
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v1 08/15] dt-bindings: spi: imx: add i.mx6ul to state errata fixed
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v1 09/15] dmaengine: imx-sdma: remove ERR009165 on i.mx6ul
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v1 07/15] spi: imx: remove ERR009165 workaround on i.mx6ul
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v1 10/15] dt-bindings: dma: imx-sdma: add i.mx6ul/6sx compatible name
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v1 15/15] arm64: defconfig: Enable SDMA on i.mx8mq/8mm
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v1 14/15] ARM: dts: imx6sll: correct ecspi/sdma compatible
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v1 12/15] ARM64: dts: freescale: imx8mm/8mq: update new compatible name for ecspi and sdma
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v1 13/15] ARM: dts: imx6ul: add dma support on ecspi
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v1 11/15] dmaengine: imx-sdma: fix ecspi1 rx dma not work on i.mx8mm
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v1 06/15] spi: imx: fix ERR009165
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v1 05/15] dma: engine: imx-sdma: add mcu_2_ecspi script
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v1 04/15] dmaengine: imx-sdma: remove dupilicated sdma_load_context
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v1 03/15] Revert "dmaengine: imx-sdma: refine to load context only once"
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v1 01/15] Revert "ARM: dts: imx6q: Use correct SDMA script for SPI5 core"
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v1 00/15] add ecspi ERR009165 for i.mx6/7 soc family
  • From: Robin Gong <yibin.gong@xxxxxxx>
• Re: [PATCH 1/2] spi: Micrel eth switch: declare missing of table
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH 2/3] spi: lpspi: add multi SS support in PIO mode
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: [PATCH 1/3] spi: lpspi: add NULL check when probe device
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: [PATCH 15/24] dt-bindings: pinctrl: pinctrl-mt65xx: add support for MT8516
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 1/3] spi: lpspi: add NULL check when probe device
  • From: Clark Wang <xiaoning.wang@xxxxxxx>
• [PATCH 2/3] spi: lpspi: add multi SS support in PIO mode
  • From: Clark Wang <xiaoning.wang@xxxxxxx>
• [PATCH 3/3] spi: lpspi: remove fsl_lpspi->chipselect
  • From: Clark Wang <xiaoning.wang@xxxxxxx>
• [PATCH 0/3] spi: lpspi: SS function related changes
  • From: Clark Wang <xiaoning.wang@xxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [v2 PATCH] spi: rspi: Fix handling of QSPI code when transmit and receive
  • From: Nguyen An Hoan <na-hoan@xxxxxxxxxxx>
• Re: [PATCH] spi: bcm2835: Convert to use CS GPIO descriptors
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v9 2/3] spi: Add Renesas R-Car Gen3 RPC-IF SPI controller driver
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] spi: Micrel eth switch: declare missing of table
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH v11 2/3] spi: Add Renesas R-Car Gen3 RPC-IF SPI controller driver
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v11 2/3] spi: Add Renesas R-Car Gen3 RPC-IF SPI controller driver
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] spi: bcm2835: Convert to use CS GPIO descriptors
  • From: kernel@xxxxxxxxxxxxxxxx
• Re: [PATCH v9 2/3] spi: Add Renesas R-Car Gen3 RPC-IF SPI controller driver
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v11 3/3] dt-bindings: mfd: Document Renesas R-Car Gen3 RPC-IF MFD bindings
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [LINUX PATCH] spi: spi-mem: zynq-qspi: Fix build error on architectures missing readsl/writesl
  • From: Naga Sureshkumar Relli <naga.sureshkumar.relli@xxxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH v11 2/3] spi: Add Renesas R-Car Gen3 RPC-IF SPI controller driver
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• [PATCH v11 3/3] dt-bindings: mfd: Document Renesas R-Car Gen3 RPC-IF MFD bindings
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• [PATCH v11 1/3] mfd: Add Renesas R-Car Gen3 RPC-IF MFD driver
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• [PATCH v11 0/3] mfd: Add Renesas R-Car Gen3 RPC-IF MFD & SPI driver
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• Re: [PATCH] spi: bcm2835: Convert to use CS GPIO descriptors
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] spi: bcm2835: Convert to use CS GPIO descriptors
  • From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
• Re: [PATCH] spi: bcm2835: Convert to use CS GPIO descriptors
  • From: Stefan Wahren <stefan.wahren@xxxxxxxx>
• Re: [PATCH] spi: bcm2835: Convert to use CS GPIO descriptors
  • From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
• [PATCH 2/2] spi: fsl: Convert to use CS GPIO descriptors
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 1/2] gpio: of: Handle the Freescale SPI CS
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] spi: bcm2835: Convert to use CS GPIO descriptors
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] spi: ep93xx: Convert to use CS GPIO descriptors
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v10 3/3] dt-bindings: mfd: Document Renesas R-Car Gen3 RPC-IF controller bindings
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 3/4] spi: Patch Macronix SPI controller driver according to MX25F0A MFD driver
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH V3 5/9] spi: export spi core function spi_set_cs
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH V3 3/9] spi: add SPI_LSBYTE_FIRST mode
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v9 2/3] spi: Add Renesas R-Car Gen3 RPC-IF SPI controller driver
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v10 3/3] dt-bindings: mfd: Document Renesas R-Car Gen3 RPC-IF controller bindings
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: 4-Byte addressing issue with IS25WP256D nor flash
  • From: <Tudor.Ambarus@xxxxxxxxxxxxx>
• Applied "spi: expand mode support" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 19/24] dt-bindings: spi: spi-mt65xx: add support for MT8516
  • From: lei liu <leilk.liu@xxxxxxxxxxxx>
• Re: [PATCH 19/24] dt-bindings: spi: spi-mt65xx: add support for MT8516
  • From: Fabien Parent <fparent@xxxxxxxxxxxx>
• Re: Issues with i.MX SPI DMA transfers
  • From: Robin Gong <yibin.gong@xxxxxxx>
• Re: Issues with i.MX SPI DMA transfers
  • From: Igor Plyatov <plyatov@xxxxxxxxx>
• RE: Issues with i.MX SPI DMA transfers
  • From: Robin Gong <yibin.gong@xxxxxxx>
• Re: [PATCH v10 1/3] mfd: Add Renesas R-Car Gen3 RPC-IF MFD controller driver
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v9 2/3] spi: Add Renesas R-Car Gen3 RPC-IF SPI controller driver
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Applied "dt-bindings: spi: spi-mt65xx: add support for MT8516" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: spi: spi-mt65xx: add support for MT8516
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: spi: spi-mt65xx: add support for MT8516
  • From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
• [PATCH] dt-bindings: spi: spi-mt65xx: add support for MT8516
  • From: Leilk Liu <leilk.liu@xxxxxxxxxxxx>
• Re: [PATCH 19/24] dt-bindings: spi: spi-mt65xx: add support for MT8516
  • From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
• Re: [PATCH v10 1/3] mfd: Add Renesas R-Car Gen3 RPC-IF MFD controller driver
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v10 2/3] spi: Add Renesas R-Car Gen3 RPC-IF SPI controller driver
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Applied "spi: pxa2xx: Add support for Intel Comet Lake" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: tegra114: fix PIO transfer" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 19/24] dt-bindings: spi: spi-mt65xx: add support for MT8516
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: pxa2xx: Add support for Intel Comet Lake
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH 22/24] dt-bindings: i2c: i2c-mtk: add support for MT8516
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 15/24] dt-bindings: pinctrl: pinctrl-mt65xx: add support for MT8516
  • From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
• Re: [PATCH 22/24] dt-bindings: i2c: i2c-mtk: add support for MT8516
  • From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
• Re: [PATCH 19/24] dt-bindings: spi: spi-mt65xx: add support for MT8516
  • From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
• Re: [PATCH 19/24] dt-bindings: spi: spi-mt65xx: add support for MT8516
  • From: lei liu <leilk.liu@xxxxxxxxxxxx>
• Re: [PATCH 22/24] dt-bindings: i2c: i2c-mtk: add support for MT8516
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 18/24] dt-bindings: timer: mtk-timer: add support for MT8516
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: [PATCH 23/24] arm64: dts: mediatek: add dtsi for MT8516
  • From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
• Re: [PATCH v10 3/3] dt-bindings: mfd: Document Renesas R-Car Gen3 RPC-IF controller bindings
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] spi: pxa2xx: Add support for Intel Comet Lake
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 22/24] dt-bindings: i2c: i2c-mtk: add support for MT8516
  • From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
• Re: [PATCH 21/24] dt-bindings: irq: mtk,sysirq: add support for MT8516
  • From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
• Re: [PATCH 20/24] dt-bindings: serial: mtk-uart: add support for MT8516
  • From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
• Re: [PATCH 19/24] dt-bindings: spi: spi-mt65xx: add support for MT8516
  • From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
• Re: [PATCH 18/24] dt-bindings: timer: mtk-timer: add support for MT8516
  • From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
• [PATCH] spi: pxa2xx: Add support for Intel Comet Lake
  • From: Evan Green <evgreen@xxxxxxxxxxxx>
• [PATCH V3 4/9] spi: tegra114: add support for Tegra SPI LSBYTE_FIRST
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• [PATCH V3 3/9] spi: add SPI_LSBYTE_FIRST mode
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• [PATCH V3 2/9] spi: expand mode support
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• [PATCH V3 0/9] bug fixes and more features to Tegra SPI
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• [PATCH V3 5/9] spi: export spi core function spi_set_cs
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• [PATCH V3 9/9] spi: tegra114: add support for TX and RX trimmers
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• [PATCH V3 8/9] spi: tegra114: add support for HW CS timing
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• [PATCH V3 7/9] spi: tegra114: add support for hw based cs
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• [PATCH V3 6/9] spi: tegra114: add support for gpio based CS
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• [PATCH V3 1/9] spi: tegra114: fix PIO transfer
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• Re: [PATCH v10 1/3] mfd: Add Renesas R-Car Gen3 RPC-IF MFD controller driver
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v10 3/3] dt-bindings: mfd: Document Renesas R-Car Gen3 RPC-IF controller bindings
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH v3 4/4] dt-bindings: mfd: Document Macronix MX25F0A controller bindings
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• [PATCH v3 3/4] spi: Patch Macronix SPI controller driver according to MX25F0A MFD driver
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• [PATCH v3 1/4] mfd: Add Macronix MX25F0A MFD controller driver
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• [PATCH v3 2/4] mtd: rawnand: Add Macronix MX25F0A NAND controller
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• [PATCH v3 0/4] Add Macronix MX25F0A MFD driver for raw nand and spi
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• Applied "spi: sh-msiof: Document r8a77470 bindings" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: pxa2xx: fix SCR (divisor) calculation" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: Remove one needless transfer speed fall back case" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH v10 2/3] spi: Add Renesas R-Car Gen3 RPC-IF SPI controller driver
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• [PATCH v10 3/3] dt-bindings: mfd: Document Renesas R-Car Gen3 RPC-IF controller bindings
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• [PATCH v10 1/3] mfd: Add Renesas R-Car Gen3 RPC-IF MFD controller driver
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• [PATCH v10 0/3] mfd: Add Renesas R-Car Gen3 RPC-IF MFD & SPI driver
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• Re: [PATCH] spi/trace: Cap buffer contents at 64 bytes
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• [PATCH] spi/trace: Cap buffer contents at 64 bytes
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• Re: [PATCH v5 3/4] spi/spi-bcm2835: Split transfers that exceed DLEN
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH v5 4/4] drm/tinydrm: Remove chunk splitting in tinydrm_spi_transfer
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• [PATCH v5 3/4] spi/spi-bcm2835: Split transfers that exceed DLEN
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• [PATCH v5 2/4] spi: Release spi_res after finalizing message
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• [PATCH v5 0/4] Chunk splitting of spi transfers
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• [PATCH v5 1/4] spi: Remove warning in spi_split_transfers_maxsize()
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• Re: [PATCH v9 2/3] spi: Add Renesas R-Car Gen3 RPC-IF SPI controller driver
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v9 2/3] spi: Add Renesas R-Car Gen3 RPC-IF SPI controller driver
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 05/24] soc: mediatek: pwrap: add support for MT8516 pwrap
  • From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
• Re: [PATCH 04/24] soc: mediatek: pwrap: add missing check on rstc
  • From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
• Re: [PATCH 03/24] dt-bindings: pwrap: mediatek: add pwrap support for MT8516
  • From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
• [PATCH] spi: Remove one needless transfer speed fall back case
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] spi: pxa2xx: fix SCR (divisor) calculation
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 2/4] spi: Split spi message into max_dma_len size chunks
  • From: Mark Brown <broonie@xxxxxxxxxx>
• WARNING in spi_register_controller
  • From: syzbot <syzbot+c60ddb60b685777d9d59@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 2/4] spi: Split spi message into max_dma_len size chunks
  • From: kernel@xxxxxxxxxxxxxxxx
• Re: [PATCH v4 2/4] spi: Split spi message into max_dma_len size chunks
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v4 2/4] spi: Split spi message into max_dma_len size chunks
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH v4 2/4] spi: Split spi message into max_dma_len size chunks
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v4 2/4] spi: Split spi message into max_dma_len size chunks
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• [PATCH] spi: rockchip: turn down tx dma bursts
  • From: Emil Renner Berthing <kernel@xxxxxxxx>
• Re: [PATCH v4 2/4] spi: Split spi message into max_dma_len size chunks
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH v4 2/4] spi: Split spi message into max_dma_len size chunks
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 1/2] spi: Add spi_is_bpw_supported()
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v4 2/4] spi: Split spi message into max_dma_len size chunks
  • From: kernel@xxxxxxxxxxxxxxxx
• Re: [PATCH v4 2/4] spi: Split spi message into max_dma_len size chunks
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH 2/2] drm/tinydrm: Use spi_is_bpw_supported()
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• [PATCH 1/2] spi: Add spi_is_bpw_supported()
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• Re: [PATCH v4 2/4] spi: Split spi message into max_dma_len size chunks
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: pxa2xx: use a module softdep for dw_dmac" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH V2 11/20] spi: expand mode support and add LSBYTE_FIRST mode
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 0/3] spi: SPI bus multiplexer
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH v2] spi: pxa2xx: fix SCR (divisor) calculation
  • From: Flavio Suligoi <f.suligoi@xxxxxxx>
• [PATCH 0/3] spi: SPI bus multiplexer
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH 2/3] spi: Make of_find_spi_controller_by_node visible
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH 3/3] spi: Add SPI bus gpio multiplexer
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH 1/3] dt-bindings: spi: Add spi-mux-gpio
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 2/4] spi: Split spi message into max_dma_len size chunks
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• Re: [PATCH v4 2/4] spi: Split spi message into max_dma_len size chunks
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• RE: [PATCH V2 11/20] spi: expand mode support and add LSBYTE_FIRST mode
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• Re: [PATCH v4 2/4] spi: Split spi message into max_dma_len size chunks
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• [PATCH v4 3/4] spi/spi-bcm2835: Remove DMA transfer size cap
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• [PATCH v4 4/4] drm/tinydrm: Remove chunk splitting in tinydrm_spi_transfer
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• [PATCH v4 2/4] spi: Split spi message into max_dma_len size chunks
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• [PATCH v4 1/4] spi: Remove warning in spi_split_transfers_maxsize()
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• [PATCH v4 0/4] Chunk splitting of spi transfers
  • From: Noralf Trønnes <noralf@xxxxxxxxxxx>
• RE: [PATCH 1/2] spi: pxa2xx: fix SCR (divisor) calculation
  • From: Flavio Suligoi <f.suligoi@xxxxxxx>
• Re: [PATCH 1/2] spi: pxa2xx: fix SCR (divisor) calculation
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• RE: [PATCH 2/2] spi: pxa2xx: use a module softdep for dw_dmac
  • From: Flavio Suligoi <f.suligoi@xxxxxxx>
• Re: [PATCH 2/2] spi: pxa2xx: use a module softdep for dw_dmac
  • From: Mark Brown <broonie@xxxxxxxxxx>
• RE: [PATCH 2/2] spi: pxa2xx: use a module softdep for dw_dmac
  • From: Flavio Suligoi <f.suligoi@xxxxxxx>
• Re: [PATCH v9 2/3] spi: Add Renesas R-Car Gen3 RPC-IF SPI controller driver
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v9 2/3] spi: Add Renesas R-Car Gen3 RPC-IF SPI controller driver
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Applied "spi: spi-mem: Make spi_mem_default_supports_op() static inline" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 2/2] spi: pxa2xx: use a module softdep for dw_dmac
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [spi:for-next 109/111] include/linux/spi/spi-mem.h:322: multiple definition of `spi_mem_default_supports_op'
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [spi:for-next 109/111] include/linux/spi/spi-mem.h:322: multiple definition of `spi_mem_default_supports_op'
  • From: kbuild test robot <lkp@xxxxxxxxx>
• RE: [PATCH 2/2] spi: pxa2xx: use a module softdep for dw_dmac
  • From: Flavio Suligoi <f.suligoi@xxxxxxx>
• [PATCH] spi: spi-mem: Make spi_mem_default_supports_op() static inline
  • From: Yue Haibing <yuehaibing@xxxxxxxxxx>
• Re: [LINUX PATCH v3] spi: spi-mem: Fix build error without CONFIG_SPI_MEM
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• Re: [PATCH 2/2] spi: pxa2xx: use a module softdep for dw_dmac
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH 2/2] spi: pxa2xx: use a module softdep for dw_dmac
  • From: Flavio Suligoi <f.suligoi@xxxxxxx>
• [PATCH 1/2] spi: pxa2xx: fix SCR (divisor) calculation
  • From: Flavio Suligoi <f.suligoi@xxxxxxx>
• Re: [LINUX PATCH v3] spi: spi-mem: Fix build error without CONFIG_SPI_MEM
  • From: Mark Brown <broonie@xxxxxxxxxx>
• RE: [LINUX PATCH v3] spi: spi-mem: Fix build error without CONFIG_SPI_MEM
  • From: Naga Sureshkumar Relli <nagasure@xxxxxxxxxx>
• Applied "spi: spi-mem: Fix build error without CONFIG_SPI_MEM" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [LINUX PATCH v3] spi: spi-mem: Fix build error without CONFIG_SPI_MEM
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [LINUX PATCH v3] spi: spi-mem: Fix build error without CONFIG_SPI_MEM
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• Re: [PATCH v2] spi: spi-mem: Fix build error without CONFIG_SPI_MEM
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH v2] spi: spi-mem: Fix build error without CONFIG_SPI_MEM
  • From: Yue Haibing <yuehaibing@xxxxxxxxxx>
• RE: [PATCH 1/1] spi: pxa2xx: add driver enabling message
  • From: Flavio Suligoi <f.suligoi@xxxxxxx>
• [LINUX PATCH v3] spi: spi-mem: Fix build error without CONFIG_SPI_MEM
  • From: Naga Sureshkumar Relli <naga.sureshkumar.relli@xxxxxxxxxx>
• Re: [PATCH 1/1] spi: pxa2xx: add driver enabling message
  • From: Mark Brown <broonie@xxxxxxxxxx>
• RE: [PATCH 1/1] spi: pxa2xx: add driver enabling message
  • From: Flavio Suligoi <f.suligoi@xxxxxxx>
• RE: [LINUX PATCH v2] spi: spi-mem: Fix build error without CONFIG_SPI_MEM
  • From: Naga Sureshkumar Relli <nagasure@xxxxxxxxxx>
• Re: [PATCH 1/1] spi: pxa2xx: add driver enabling message
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [LINUX PATCH v2] spi: spi-mem: Fix build error without CONFIG_SPI_MEM
  • From: Mark Brown <broonie@xxxxxxxxxx>
• RE: [PATCH v2 1/1] spi: pxa2xx: add driver enabling message
  • From: Flavio Suligoi <f.suligoi@xxxxxxx>
• Re: [PATCH v2 1/1] spi: pxa2xx: add driver enabling message
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• [PATCH v2 1/1] spi: pxa2xx: add driver enabling message
  • From: Flavio Suligoi <f.suligoi@xxxxxxx>
• Re: [PATCH v2 3/4] spi: Add MFD for Macronix MX25F0A SPI controller driver
  • From: Mark Brown <broonie@xxxxxxxxxx>
• RE: [PATCH 1/1] spi: pxa2xx: add driver enabling message
  • From: Flavio Suligoi <f.suligoi@xxxxxxx>
• Re: [PATCH 1/1] spi: pxa2xx: add driver enabling message
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• RE: [PATCH 1/1] spi: pxa2xx: add driver enabling message
  • From: Flavio Suligoi <f.suligoi@xxxxxxx>
• Re: [PATCH v9 2/3] spi: Add Renesas R-Car Gen3 RPC-IF SPI controller driver
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
• Re: [PATCH v9 2/3] spi: Add Renesas R-Car Gen3 RPC-IF SPI controller driver
  • From: Marek Vasut <marek.vasut@xxxxxxxxx>
• Re: [PATCH 1/1] spi: pxa2xx: add driver enabling message
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v9 2/3] spi: Add Renesas R-Car Gen3 RPC-IF SPI controller driver
  • From: Marek Vasut <marek.vasut@xxxxxxxxx>
• RE: linux-next: Tree for Apr 9 (spi/spi-zynq-qspi.c)
  • From: Naga Sureshkumar Relli <nagasure@xxxxxxxxxx>
• [LINUX PATCH v2] spi: spi-mem: Fix build error without CONFIG_SPI_MEM
  • From: Naga Sureshkumar Relli <naga.sureshkumar.relli@xxxxxxxxxx>
• RE: [PATCH] spi: spi-mem: Fix build error without CONFIG_SPI_MEM
  • From: Naga Sureshkumar Relli <nagasure@xxxxxxxxxx>
• RE: [PATCH] spi: spi-mem: Fix build error without CONFIG_SPI_MEM
  • From: Naga Sureshkumar Relli <nagasure@xxxxxxxxxx>
• Re: [RFC v2 00/11] DVFS in the OPP core
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [RFC v2 09/11] drm/msm/dpu: Use OPP API to set clk/perf state
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH] spi: spi-mem: Fix build error without CONFIG_SPI_MEM
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• Re: [PATCH v9 2/3] spi: Add Renesas R-Car Gen3 RPC-IF SPI controller driver
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] spi: spi-mem: Fix build error without CONFIG_SPI_MEM
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• Re: linux-next: Tree for Apr 9 (spi/spi-zynq-qspi.c)
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• RE: [PATCH 1/1] spi: pxa2xx: add driver enabling message
  • From: Flavio Suligoi <f.suligoi@xxxxxxx>
• Re: [PATCH 1/1] spi: pxa2xx: add driver enabling message
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v9 2/3] spi: Add Renesas R-Car Gen3 RPC-IF SPI controller driver
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] spi: rspi: Fix handling of QSPI code when transmit and receive
  • From: Hoan <na-hoan@xxxxxxxxxxx>
• RE: Issues with i.MX SPI DMA transfers
  • From: Robin Gong <yibin.gong@xxxxxxx>
• [PATCH v2 4/4] dt-bindings: mfd: Document Macronix MX25F0A controller bindings
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• [PATCH v2 3/4] spi: Add MFD for Macronix MX25F0A SPI controller driver
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• [PATCH v2 1/4] mfd: Add Macronix MX25F0A MFD controller driver
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• [PATCH v2 2/4] mtd: rawnand: Add Macronix MX25F0A NAND controller driver
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• [PATCH v2 0/4] Add Macronix MX25F0A MFD driver for raw nand and spi
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• Re: [PATCH] spi: rockchip: Revert "set min/max speed"
  • From: Vicente Bergas <vicencb@xxxxxxxxx>
• Re: [PATCH 15/24] dt-bindings: pinctrl: pinctrl-mt65xx: add support for MT8516
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v4 3/3] fpga: Add fpga manager driver for ARRI Altera FPP
  • From: Anatolij Gustschin <agust@xxxxxxx>
• Re: [PATCH v4 3/3] fpga: Add fpga manager driver for ARRI Altera FPP
  • From: Moritz Fischer <mdf@xxxxxxxxxx>
• Re: [LINUX PATCH v2 3/3] spi: spi-mem: Add support for Zynq QSPI controller
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v4 3/3] fpga: Add fpga manager driver for ARRI Altera FPP
  • From: Anatolij Gustschin <agust@xxxxxxx>
• [PATCH 1/1] spi: pxa2xx: add driver enabling message
  • From: Flavio Suligoi <f.suligoi@xxxxxxx>
• [PATCH] spi: spi-mem: Fix build error without CONFIG_SPI_MEM
  • From: Yue Haibing <yuehaibing@xxxxxxxxxx>
• Re: [BUG] Rockchip SPI: long burst writes produce unexpected result
  • From: Vicente Bergas <vicencb@xxxxxxxxx>
• Re: [PATCH] spi: Add missing error handling for CS GPIOs
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] spi: spi-gpio: Remove spi->controller_data comment
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• RE: Issues with i.MX SPI DMA transfers
  • From: Robin Gong <yibin.gong@xxxxxxx>
• Applied "spi: kill useless initializer in spi_register_controller()" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: bcm2835aux: Fix build error without CONFIG_DEBUG_FS" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi-mem: fix kernel-doc for spi_mem_dirmap_{read|write}()" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: fsl-lpspi: Fix problematic dev_set_drvdata call" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: fsl-lpspi: Fix build warning when !CONFIG_PM" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: pxa2xxx: change "no DMA channels..." msg from debug to warning" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: fsl-lpspi: Clean up fsl_lpspi_probe" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: gpio: Make sure spi_master_put() is called in every error path" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: bitbang: Introduce spi_bitbang_init()" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: gpio: Use devm_spi_register_master()" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: tegra114: add dual mode support" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: tegra114: add 3 wire transfer mode support" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi-summary: document set_cs_timing" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: tegra114: add support for interrupt mask" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: add a method for configuring CS timing" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: document tx/rx clock delay properties" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH V2 19/20] DT bindings: spi: document tx/rx clock delay properties
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH V2 14/20] spi: tegra114: add support for gpio based cs
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH V2 11/20] spi: expand mode support and add LSBYTE_FIRST mode
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: kill useless initializer in spi_register_master()
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH V2 10/20] Documentation: devicetree: spi: add spi-lsbyte-first propery
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [BUG] Rockchip SPI: long burst writes produce unexpected result
  • From: Emil Renner Berthing <emil.renner.berthing@xxxxxxxxx>
• [PATCH 3/3] spi: fsl-lpspi: Clean up fsl_lpspi_probe
  • From: Axel Lin <axel.lin@xxxxxxxxxx>
• [PATCH 2/3] spi: fsl-lpspi: Fix build warning when !CONFIG_PM
  • From: Axel Lin <axel.lin@xxxxxxxxxx>
• [PATCH 1/3] spi: fsl-lpspi: Fix problematic dev_set_drvdata call
  • From: Axel Lin <axel.lin@xxxxxxxxxx>
• [PATCH] spi: rockchip: Revert "set min/max speed"
  • From: Vicente Bergas <vicencb@xxxxxxxxx>
• Re: [BUG] Rockchip SPI: long burst writes produce unexpected result
  • From: Vicente Bergas <vicencb@xxxxxxxxx>
• Re: [BUG] Rockchip SPI: long burst writes produce unexpected result
  • From: Vicente Bergas <vicencb@xxxxxxxxx>
• Re: [PATCH v9 2/3] spi: Add Renesas R-Car Gen3 RPC-IF SPI controller driver
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] spi: bcm2835aux: Fix build error without CONFIG_DEBUG_FS
  • From: Mukesh Ojha <mojha@xxxxxxxxxxxxxx>
• [PATCH] spi-mem: fix kernel-doc for spi_mem_dirmap_{read|write}()
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [BUG] Rockchip SPI: long burst writes produce unexpected result
  • From: Vicente Bergas <vicencb@xxxxxxxxx>
• [PATCH] spi: bcm2835aux: Fix build error without CONFIG_DEBUG_FS
  • From: Yue Haibing <yuehaibing@xxxxxxxxxx>
• [PATCH v2] spi: kill useless initializer in spi_register_controller()
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH 1/1] spi: pxa2xxx: change "no DMA channels..." msg from debug to warning
  • From: Flavio Suligoi <f.suligoi@xxxxxxx>
• Re: [PATCH] spi: kill useless initializer in spi_register_master()
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [spi:for-5.2 70/75] drivers/spi/spi-gpio.c:313:1-3: WARNING: PTR_ERR_OR_ZERO can be used
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [LINUX PATCH v2 3/3] spi: spi-mem: Add support for Zynq QSPI controller
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• [PATCH] spi: rspi: Fix handling of QSPI code when transmit and receive
  • From: Nguyen An Hoan <na-hoan@xxxxxxxxxxx>
• RE: [LINUX PATCH v2 3/3] spi: spi-mem: Add support for Zynq QSPI controller
  • From: Naga Sureshkumar Relli <nagasure@xxxxxxxxxx>
• Re: [LINUX PATCH v2 3/3] spi: spi-mem: Add support for Zynq QSPI controller
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• [spi:for-5.2 75/75] drivers/spi/spi-zynq-qspi.c:410:3: error: implicit declaration of function 'writesl'; did you mean 'writel'?
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Applied "spi: tegra114: avoid reset call in atomic context" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: Don't call spi_get_gpio_descs() before device name is set" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: gpio: Drop mflags argument from spi_gpio_request()" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: tegra114: de-assert CS before SPI mode change" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: tegra114: dump SPI registers during timeout" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: tegra114: use unpacked mode for below 4 bytes" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: tegra114: set supported bits per word" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: tegra114: set bus number based on id" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: gpio: Don't request CS GPIO in DT use-case" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: spi-mem: Add support for Zynq QSPI controller" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "dt-bindings: spi: Add device tree binding documentation for Zynq QSPI controller" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: gpio: Drop unused pdev field in struct spi_gpio" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: kill useless initializer in spi_register_master()
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH V2 01/20] spi: tegra114: fix PIO transfer
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• [PATCH V2 04/20] spi: tegra114: avoid reset call in atomic context
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• [PATCH V2 03/20] spi: tegra114: de-assert CS before SPI mode change
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• [PATCH V2 02/20] spi: tegra114: use unpacked mode for below 4 bytes
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• [PATCH V2 07/20] spi: tegra114: set bus number based on id
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• [PATCH V2 05/20] spi: tegra114: dump SPI registers during timeout
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• [PATCH V2 10/20] Documentation: devicetree: spi: add spi-lsbyte-first propery
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• [PATCH V2 06/20] spi: tegra114: set supported bits per word
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• [PATCH V2 08/20] spi: tegra114: add dual mode support
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• [PATCH V2 09/20] spi: tegra114: add 3 wire transfer mode support
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• [PATCH V2 11/20] spi: expand mode support and add LSBYTE_FIRST mode
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• [PATCH V2 12/20] spi: tegra114: add support for LSBYTE_FIRST
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• [PATCH V2 13/20] spi: tegra114: add support for interrupt mask
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• [PATCH V2 16/20] spi-summary: document set_cs_timing
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• [PATCH V2 14/20] spi: tegra114: add support for gpio based cs
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• [PATCH V2 18/20] spi: tegra114: add support for HW CS timing
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• [PATCH V2 19/20] DT bindings: spi: document tx/rx clock delay properties
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• [PATCH V2 20/20] spi: tegra114: add support for tuning TX and RX trimmers
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• [PATCH V2 17/20] spi: add a method for configuring CS timing
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• [PATCH V2 15/20] spi: tegra114: add support for hw based cs
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• [PATCH] spi: kill useless initializer in spi_register_master()
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v9 2/3] spi: Add Renesas R-Car Gen3 RPC-IF SPI controller driver
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
• Re: [PATCH v9 2/3] spi: Add Renesas R-Car Gen3 RPC-IF SPI controller driver
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] spi: sh-msiof: Convert to use GPIO descriptors
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] spi: sh-msiof: Fix the limit of data length when calculating the length of words
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Applied "spi: bcm2835aux: polling_limit_us can be static" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: spi-gpio: Remove spi->controller_data comment" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: sh-msiof: Convert to use GPIO descriptors" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: Add missing error handling for CS GPIOs" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: sh-msiof: Fix the limit of data length when calculating the length of words
  • From: Hoan <na-hoan@xxxxxxxxxxx>
• [RFC PATCH spi] spi: bcm2835aux: polling_limit_us can be static
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [spi:for-5.2 53/62] drivers/spi/spi-bcm2835aux.c:40:14: sparse: symbol 'polling_limit_us' was not declared. Should it be static?
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: Issues with i.MX SPI DMA transfers
  • From: Igor Plyatov <plyatov@xxxxxxxxx>
• Re: [PATCH 1/4 v3] spi: Support high CS when using descriptors
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4 v3] spi: Support high CS when using descriptors
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: Issues with i.MX SPI DMA transfers
  • From: Igor Plyatov <plyatov@xxxxxxxxx>
• [PATCH] spi: sh-msiof: Convert to use GPIO descriptors
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH] spi: Add missing error handling for CS GPIOs
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH] spi: spi-gpio: Remove spi->controller_data comment
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• Re: [PATCH 4/7] dt-bindings: mfd: Document Macronix MX25F0A controller bindings
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH] spi: rspi: Add configuration for LSB/MSB
  • From: Nguyen An Hoan <na-hoan@xxxxxxxxxxx>
• Re: [PATCH] spi: sh-msiof: Fix the limit of data length when calculating the length of words
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4 v3] spi: Support high CS when using descriptors
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] spi: sh-msiof: Fix the limit of data length when calculating the length of words
  • From: Nguyen An Hoan <na-hoan@xxxxxxxxxxx>
• Re: [PATCH 1/4 v3] spi: Support high CS when using descriptors
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: Applied "spi: sh-msiof: Use readl_poll_timeout_atomic() instead of open-coding" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• RE: Issues with i.MX SPI DMA transfers
  • From: Robin Gong <yibin.gong@xxxxxxx>
• Re: Applied "spi: sh-msiof: Use readl_poll_timeout_atomic() instead of open-coding" to the spi tree
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Applied "spi: spi-mem: export spi_mem_default_supports_op()" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: sh-msiof: Use BIT() and GENMASK()" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: bcm2835aux: unifying code between polling and interrupt driven code" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: bcm2835aux: remove dangerous uncontrolled read of fifo" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: bcm2835aux: fix corruptions for longer spi transfers" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: bcm2835aux: remove dead code" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: bcm2835aux: setup gpio-cs to output and correct level during setup" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: bcm2835aux: fix driver to not allow 65535 (=-1) cs-gpios" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: bcm2835aux: warn in dmesg that native cs is not really supported" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: bcm2835aux: make the polling duration limits configurable" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: gpio: Drop unused spi_to_pdata()" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: gpio: Add local struct spi_bitbang pointer in spi_gpio_probe()" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: gpio: Simplify SPI_MASTER_NO_TX check in spi_gpio_probe()" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: gpio: Drop unused pdata copy in struct spi_gpio" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: gpio: Add local struct device pointer in spi_gpio_probe()" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: lpspi: add missing complete in abort func at dma mode" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: sh-msiof: Add reset of registers before starting transfer" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: sh-msiof: Use readl_poll_timeout_atomic() instead of open-coding" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: bcm2835aux: add driver stats to debugfs" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH V3 5/9] spi: bcm2835aux: fix driver to not allow 65535 (=-1) cs-gpios
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH 03/12] spi: gpio: Add local struct spi_bitbang pointer in spi_gpio_probe()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 02/12] spi: gpio: Add local struct device pointer in spi_gpio_probe()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 05/12] spi: gpio: Drop unused pdata copy in struct spi_gpio
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 06/12] spi: gpio: Don't request CS GPIO in DT use-case
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 08/12] spi: gpio: Drop mflags argument from spi_gpio_request()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 04/12] spi: gpio: Simplify SPI_MASTER_NO_TX check in spi_gpio_probe()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 10/12] spi: gpio: Make sure spi_master_put() is called in every error path
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 12/12] spi: gpio: Use devm_spi_register_master()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 11/12] spi: bitbang: Introduce spi_bitbang_init()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 09/12] spi: gpio: Drop unused pdev field in struct spi_gpio
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 07/12] spi: Don't call spi_get_gpio_descs() before device name is set
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 01/12] spi: gpio: Drop unused spi_to_pdata()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 00/12] SPI GPIO improvements
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• RE: [PATCH V1 21/26] DT bindings: spi: add tx/rx clock delay SPI client properties
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• Re: [PATCH v9 2/3] spi: Add Renesas R-Car Gen3 RPC-IF SPI controller driver
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH V3 0/9] spi: bcm2835aux: bug fixes and improvements
  • From: Stefan Wahren <stefan.wahren@xxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• Re: [PATCH v2 3/3] spi: sh-msiof: Add reset of registers before starting transfer
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 0/3] spi: sh-msiof: Add reset of registers before starting transfer
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/3] spi: sh-msiof: Use readl_poll_timeout_atomic() instead of open-coding
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] spi: sh-msiof: Use BIT() and GENMASK()
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 0/3] spi: sh-msiof: Add reset of registers before starting transfer
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH v2 0/3] spi: sh-msiof: Add reset of registers before starting transfer
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH v2 1/3] spi: sh-msiof: Use BIT() and GENMASK()
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH v2 3/3] spi: sh-msiof: Add reset of registers before starting transfer
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH v2 2/3] spi: sh-msiof: Use readl_poll_timeout_atomic() instead of open-coding
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH] spi: lpspi: add missing complete in abort func at dma mode
  • From: Clark Wang <xiaoning.wang@xxxxxxx>
• Re: Issues with i.MX SPI DMA transfers
  • From: Igor Plyatov <plyatov@xxxxxxxxx>
• Re: [BUG] gpiolib: spi chip select legacy support breaks modern chip select and whitens the GTA04 LCD panel
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [RFC PATCH 0/4] spi: spi-fsl-spi: try to make cpu-mode transfers faster
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [RFC PATCH 0/4] spi: spi-fsl-spi: try to make cpu-mode transfers faster
  • From: Rasmus Villemoes <rasmus.villemoes@xxxxxxxxx>
• RE: Issues with i.MX SPI DMA transfers
  • From: Robin Gong <yibin.gong@xxxxxxx>
• Re: Issues with i.MX SPI DMA transfers
  • From: Igor Plyatov <plyatov@xxxxxxxxx>
• Re: [BUG] gpiolib: spi chip select legacy support breaks modern chip select and whitens the GTA04 LCD panel
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [BUG] gpiolib: spi chip select legacy support breaks modern chip select and whitens the GTA04 LCD panel
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [BUG] gpiolib: spi chip select legacy support breaks modern chip select and whitens the GTA04 LCD panel
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH V1 24/26] spi: tegra114: de-assert CS before SPI mode is reset to its default
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH V1 19/26] DT bindings: spi: add spi client device properties
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2] spi: tegra20-slink: change chip select action order
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [Letux-kernel] [BUG] gpiolib: spi chip select legacy support breaks modern chip select and whitens the GTA04 LCD panel
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [BUG] gpiolib: spi chip select legacy support breaks modern chip select and whitens the GTA04 LCD panel
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 16/24] pinctrl: mediatek: Add MT8516 Pinctrl driver
  • From: Sean Wang <sean.wang@xxxxxxxxxx>
• RE: [PATCH V1 18/26] spi: tegra114: add support for hw based cs
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• RE: [PATCH V1 04/26] spi: tegra114: use packed mode for 32 bits per word
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• RE: [PATCH V1 24/26] spi: tegra114: de-assert CS before SPI mode is reset to its default
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• RE: [PATCH V1 19/26] DT bindings: spi: add spi client device properties
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• Re: [PATCH 4/7] dt-bindings: mfd: Document Macronix MX25F0A controller bindings
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH] eeprom: at25: Convert the driver to the spi-mem interface
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH] eeprom: at25: Convert the driver to the spi-mem interface
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH] eeprom: at25: Convert the driver to the spi-mem interface
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Applied "spi: spi-fsl-spi: remove always-true conditional in fsl_spi_do_one_msg" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: tegra114: reset controller on probe" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: tegra114: configure dma burst size to fifo trig level" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: spi-fsl-spi: relax message sanity checking a little" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: tegra114: use packed mode for 32 bits per word" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: tegra114: fix for unpacked mode transfers" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: tegra114: clear packed bit for unpacked mode" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: tegra114: terminate dma and reset on transfer timeout" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: pic32: fix dma channels termination" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: tegra114: flush fifos" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: tegra114: add SPI_LSB_FIRST support" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH V1 05/26] spi: tegra114: use unpacked mode for below 4 byte transfers
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [LINUX PATCH v2 3/3] spi: spi-mem: Add support for Zynq QSPI controller
  • From: Naga Sureshkumar Relli <naga.sureshkumar.relli@xxxxxxxxxx>
• [LINUX PATCH v2 2/3] spi: spi-mem: export spi_mem_default_supports_op()
  • From: Naga Sureshkumar Relli <naga.sureshkumar.relli@xxxxxxxxxx>
• [LINUX PATCH v2 1/3] dt-bindings: spi: Add device tree binding documentation for Zynq QSPI controller
  • From: Naga Sureshkumar Relli <naga.sureshkumar.relli@xxxxxxxxxx>
• [LINUX PATCH v2 0/3] Add support for Zynq QSPI controller driver
  • From: Naga Sureshkumar Relli <naga.sureshkumar.relli@xxxxxxxxxx>
• Re: [PATCH 3/7] spi: Patch Macronix MX25F0A SPI controller driver
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH V1 24/26] spi: tegra114: de-assert CS before SPI mode is reset to its default
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH V1 18/26] spi: tegra114: add support for hw based cs
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH V1 09/26] spi: tegra114: dump SPI registers during timeout
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH V1 04/26] spi: tegra114: use packed mode for 32 bits per word
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH V1 19/26] DT bindings: spi: add spi client device properties
  • From: Mark Brown <broonie@xxxxxxxxxx>
• RE: Issues with i.MX SPI DMA transfers
  • From: Robin Gong <yibin.gong@xxxxxxx>
• Re: [RFC PATCH 0/4] spi: spi-fsl-spi: try to make cpu-mode transfers faster
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: oc-tiny: fix negative loop bound error on for loop
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: bcm-qspi: when tx/rx buffer is NULL set to 0
  • From: Kamal Dasu <kdasu.kdev@xxxxxxxxx>
• Re: [PATCH] spi: oc-tiny: fix negative loop bound error on for loop
  • From: Mukesh Ojha <mojha@xxxxxxxxxxxxxx>
• Re: [PATCH] spi: oc-tiny: fix negative loop bound error on for loop
  • From: Mukesh Ojha <mojha@xxxxxxxxxxxxxx>
• Re: [PATCH V1 21/26] DT bindings: spi: add tx/rx clock delay SPI client properties
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [RFC][PATCH v1] spi: Introduce custom GPIO chip select for slave devices
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] spi: oc-tiny: fix negative loop bound error on for loop
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• Re: [Letux-kernel] [BUG] gpiolib: spi chip select legacy support breaks modern chip select and whitens the GTA04 LCD panel
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [Letux-kernel] [BUG] gpiolib: spi chip select legacy support breaks modern chip select and whitens the GTA04 LCD panel
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [PATCH] eeprom: at25: Convert the driver to the spi-mem interface
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH V3 8/9] spi: bcm2835aux: add driver stats to debugfs
  • From: kernel@xxxxxxxxxxxxxxxx
• [PATCH V3 9/9] spi: bcm2835aux: make the polling duration limits configurable
  • From: kernel@xxxxxxxxxxxxxxxx
• [PATCH V3 7/9] spi: bcm2835aux: setup gpio-cs to output and correct level during setup
  • From: kernel@xxxxxxxxxxxxxxxx
• [PATCH V3 6/9] spi: bcm2835aux: warn in dmesg that native cs is not really supported
  • From: kernel@xxxxxxxxxxxxxxxx
• [PATCH V3 5/9] spi: bcm2835aux: fix driver to not allow 65535 (=-1) cs-gpios
  • From: kernel@xxxxxxxxxxxxxxxx
• [PATCH V3 4/9] spi: bcm2835aux: remove dead code
  • From: kernel@xxxxxxxxxxxxxxxx
• [PATCH V3 3/9] spi: bcm2835aux: fix corruptions for longer spi transfers
  • From: kernel@xxxxxxxxxxxxxxxx
• [PATCH V3 2/9] spi: bcm2835aux: remove dangerous uncontrolled read of fifo
  • From: kernel@xxxxxxxxxxxxxxxx
• [PATCH V3 1/9] spi: bcm2835aux: unifying code between polling and interrupt driven code
  • From: kernel@xxxxxxxxxxxxxxxx
• [PATCH V3 0/9] spi: bcm2835aux: bug fixes and improvements
  • From: kernel@xxxxxxxxxxxxxxxx
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH v2] spi: tegra20-slink: change chip select action order
  • From: Randolph Maaßen <gaireg@xxxxxxxxx>
• Re: [PATCH v9 2/3] spi: Add Renesas R-Car Gen3 RPC-IF SPI controller driver
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v9 1/3] mfd: Add Renesas R-Car Gen3 RPC-IF MFD controller driver
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] spi: pxa2xx: Unify remaing prints in pxa2xx_spi_transfer_one()
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• [PATCH 1/2] spi: pxa2xx: Use struct spi_device directly in pxa2xx_spi_transfer_one()
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: Issues with i.MX SPI DMA transfers
  • From: Igor Plyatov <plyatov@xxxxxxxxx>
• RE: [LINUX PATCH 2/3] spi: spi-mem: call spi_mem_default_supports_op() first
  • From: Naga Sureshkumar Relli <nagasure@xxxxxxxxxx>
• Re: [LINUX PATCH 2/3] spi: spi-mem: call spi_mem_default_supports_op() first
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• Re: [LINUX PATCH 2/3] spi: spi-mem: call spi_mem_default_supports_op() first
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• Re: [PATCH v9 3/3] dt-bindings: mfd: Document Renesas R-Car Gen3 RPC-IF controller bindings
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v9 3/3] dt-bindings: mfd: Document Renesas R-Car Gen3 RPC-IF controller bindings
  • From: Marek Vasut <marek.vasut@xxxxxxxxx>
• Re: [PATCH v9 2/3] spi: Add Renesas R-Car Gen3 RPC-IF SPI controller driver
  • From: Marek Vasut <marek.vasut@xxxxxxxxx>
• Re: [PATCH v9 1/3] mfd: Add Renesas R-Car Gen3 RPC-IF MFD controller driver
  • From: Marek Vasut <marek.vasut@xxxxxxxxx>
• Re: [LINUX PATCH 2/3] spi: spi-mem: call spi_mem_default_supports_op() first
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
• Re: [LINUX PATCH 2/3] spi: spi-mem: call spi_mem_default_supports_op() first
  • From: Vignesh Raghavendra <vigneshr@xxxxxx>
• [PATCH v9 1/3] mfd: Add Renesas R-Car Gen3 RPC-IF MFD controller driver
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• [PATCH v9 0/3] mfd: Add Renesas R-Car Gen3 RPC-IF MFD driver
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• [PATCH v9 2/3] spi: Add Renesas R-Car Gen3 RPC-IF SPI controller driver
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• [PATCH v9 3/3] dt-bindings: mfd: Document Renesas R-Car Gen3 RPC-IF controller bindings
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• Re: [LINUX PATCH 2/3] spi: spi-mem: call spi_mem_default_supports_op() first
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
• Re: [PATCH 23/24] arm64: dts: mediatek: add dtsi for MT8516
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH 07/24] arm64: dts: mt6392: Add PMIC mt6392 dtsi
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH 01/24] dt-bindings: regulator: add support for MT6392
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH 17/24] dt-bindings: wdog: mtk-wdt: add support for MT851
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH 22/24] dt-bindings: i2c: i2c-mtk: add support for MT8516
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH 21/24] dt-bindings: irq: mtk,sysirq: add support for MT8516
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH 20/24] dt-bindings: serial: mtk-uart: add support for MT8516
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH 19/24] dt-bindings: spi: spi-mt65xx: add support for MT8516
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH 18/24] dt-bindings: timer: mtk-timer: add support for MT8516
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH 15/24] dt-bindings: pinctrl: pinctrl-mt65xx: add support for MT8516
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH 13/24] dt-bindings: mediatek: apmixedsys: add support for MT8516
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH 12/24] dt-bindings: mediatek: infracfg: add support for MT8516
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH 11/24] dt-bindings: mediatek: topckgen: add support for MT8516
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH 03/24] dt-bindings: pwrap: mediatek: add pwrap support for MT8516
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH] spi: tegra20-slink: change chip select action order
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• [LINUX PATCH 3/3] spi: spi-mem: Add support for Zynq QSPI controller
  • From: Naga Sureshkumar Relli <naga.sureshkumar.relli@xxxxxxxxxx>
• [LINUX PATCH 2/3] spi: spi-mem: call spi_mem_default_supports_op() first
  • From: Naga Sureshkumar Relli <naga.sureshkumar.relli@xxxxxxxxxx>
• [LINUX PATCH 1/3] dt-bindings: spi: Add device tree binding documentation for Zynq QSPI controller
  • From: Naga Sureshkumar Relli <naga.sureshkumar.relli@xxxxxxxxxx>
• [LINUX PATCH 0/3] Add support for Zynq QSPI controller driver
  • From: Naga Sureshkumar Relli <naga.sureshkumar.relli@xxxxxxxxxx>
• Re: Issues with i.MX SPI DMA transfers
  • From: Igor Plyatov <plyatov@xxxxxxxxx>
• [PATCH 7/7] mtd: rawnand: Add Macronix NAND block protection driver
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• [PATCH 6/7] mtd: rawnand: Add Macronix NAND read retry and randomizer support
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• [PATCH 5/7] spi: Add direct mapping mode for Macronix SPI controller
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• [PATCH 4/7] dt-bindings: mfd: Document Macronix MX25F0A controller bindings
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• [PATCH 3/7] spi: Patch Macronix MX25F0A SPI controller driver
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• [PATCH 2/7] mtd: rawnand: Add Macronix MX25F0A NAND controller driver
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• [PATCH 1/7] mfd: Add Macronix MX25F0A MFD controller driver
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• [PATCH 0/7] Add Macronix MX25F0A MFD driver and NAND function
  • From: Mason Yang <masonccyang@xxxxxxxxxxx>
• RE: Issues with i.MX SPI DMA transfers
  • From: Robin Gong <yibin.gong@xxxxxxx>
• Re: Issues with i.MX SPI DMA transfers
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• RE: Issues with i.MX SPI DMA transfers
  • From: Robin Gong <yibin.gong@xxxxxxx>
• Re: Issues with i.MX SPI DMA transfers
  • From: Igor Plyatov <plyatov@xxxxxxxxx>
• Re: Issues with i.MX SPI DMA transfers
  • From: Igor Plyatov <plyatov@xxxxxxxxx>
• Re: Issues with i.MX SPI DMA transfers
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• RE: Issues with i.MX SPI DMA transfers
  • From: Aisheng Dong <aisheng.dong@xxxxxxx>
• Issues with i.MX SPI DMA transfers
  • From: Igor Plyatov <plyatov@xxxxxxxxx>
• [RFC PATCH 4/4] spi: spi-fsl-spi: automatically adapt bits-per-word in cpu mode
  • From: Rasmus Villemoes <rasmus.villemoes@xxxxxxxxx>
• [RFC PATCH 1/4] spi: spi-fsl-spi: remove always-true conditional in fsl_spi_do_one_msg
  • From: Rasmus Villemoes <rasmus.villemoes@xxxxxxxxx>
• [RFC PATCH 3/4] spi: spi-fsl-spi: allow changing bits_per_word while CS is still active
  • From: Rasmus Villemoes <rasmus.villemoes@xxxxxxxxx>
• [RFC PATCH 2/4] spi: spi-fsl-spi: relax message sanity checking a little
  • From: Rasmus Villemoes <rasmus.villemoes@xxxxxxxxx>
• [RFC PATCH 0/4] spi: spi-fsl-spi: try to make cpu-mode transfers faster
  • From: Rasmus Villemoes <rasmus.villemoes@xxxxxxxxx>
• Re: [PATCH v8 1/2] spi: Add Renesas R-Car Gen3 RPC-IF SPI controller driver
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH V1 02/26] spi: tegra114: clear packed bit for unpacked mode
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• [PATCH V1 03/26] spi: tegra114: fix for unpacked mode transfers
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• [PATCH V1 04/26] spi: tegra114: use packed mode for 32 bits per word
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• [PATCH V1 09/26] spi: tegra114: dump SPI registers during timeout
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• [PATCH V1 05/26] spi: tegra114: use unpacked mode for below 4 byte transfers
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• [PATCH V1 06/26] spi: tegra114: terminate dma and reset on transfer timeout
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• [PATCH V1 10/26] spi: tegra114: avoid reset call in atomic context
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• [PATCH V1 11/26] spi: tegra114: reset controller on probe
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• [PATCH V1 12/26] spi: tegra114: add SPI_LSB_FIRST support
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• [PATCH V1 13/26] spi: tegra114: add dual mode support
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• [PATCH V1 14/26] spi: tegra114: add 3 wire transfer mode support
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• [PATCH V1 18/26] spi: tegra114: add support for hw based cs
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• [PATCH V1 17/26] spi: tegra114: add support for interrupt mask
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• [PATCH V1 15/26] spi: tegra114: set supported bits_per_word
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• [PATCH V1 19/26] DT bindings: spi: add spi client device properties
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• [PATCH V1 20/26] spi: tegra114: add support for tuning HW CS timing
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• [PATCH V1 21/26] DT bindings: spi: add tx/rx clock delay SPI client properties
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• [PATCH V1 26/26] spi: tegra114: add support for LSBYTE_FIRST
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• [PATCH V1 24/26] spi: tegra114: de-assert CS before SPI mode is reset to its default
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• [PATCH V1 23/26] spi: tegra114: add support for gpio based cs
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• [PATCH V1 25/26] spi: expand mode and mode_bits support
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• [PATCH V1 22/26] spi: tegra114: add support for tuning clock delay
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• [PATCH V1 16/26] spi: tegra114: set bus number based on id
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• [PATCH V1 07/26] spi: tegra114: flush fifos
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• [PATCH V1 08/26] spi: tegra114: configure dma burst size to fifo trig level
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• [PATCH V1 01/26] spi: tegra114: fix PIO transfer
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• [PATCH] spi: pic32: fix dma channels termination
  • From: cezary.gapinski@xxxxxxxxx
• [RFC][PATCH v1] spi: Introduce custom GPIO chip select for slave devices
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• RE: [PATCH] spi: tegra20-slink: change chip select action order
  • From: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
• Re: [PATCH v8 1/2] spi: Add Renesas R-Car Gen3 RPC-IF SPI controller driver
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 1/2] dt-bindings: spi: Add device tree binding documentation for Zynq QSPI controller
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] spi: tegra20-slink: change chip select action order
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Applied "spi: stm32-qspi: add dma support" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: stm32-qspi: add spi_master_put in release function" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] spi: tegra20-slink: change chip select action order
  • From: Randolph Maaßen <gaireg@xxxxxxxxx>
• Re: [PATCH v8 1/2] spi: Add Renesas R-Car Gen3 RPC-IF SPI controller driver
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH V2 2/2] spi: stm32-qspi: add dma support
  • From: Ludovic Barre <ludovic.Barre@xxxxxx>
• [PATCH V2 1/2] spi: stm32-qspi: add spi_master_put in release function
  • From: Ludovic Barre <ludovic.Barre@xxxxxx>
• [PATCH V2 0/2] spi: stm32-qspi: add dma support
  • From: Ludovic Barre <ludovic.Barre@xxxxxx>
• Re: [PATCH 1/2] spi: stm32-qspi: add spi_master_put in release function
  • From: Ludovic BARRE <ludovic.barre@xxxxxx>
• Re: [PATCH 1/2] spi: stm32-qspi: add spi_master_put in release function
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: atmel-quadspi: Make atmel_qspi_get_name static" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: at91-usart: Remove duplicated checking for spi->bits_per_word" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Applied "spi: mt7621: Move SPI driver out of staging" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] spi: mt7621: Move SPI driver out of staging
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH V2 8/9] spi: bcm2835aux: add driver stats to debugfs
  • From: Stefan Wahren <stefan.wahren@xxxxxxxx>
• Re: [PATCH V2 6/9] spi: bcm2835aux: warn in dmesg that native cs is not really supported
  • From: Stefan Wahren <stefan.wahren@xxxxxxxx>
• Re: [PATCH V2 8/9] spi: bcm2835aux: add driver stats to debugfs
  • From: kernel@xxxxxxxxxxxxxxxx
• Re: [PATCH V2 8/9] spi: bcm2835aux: add driver stats to debugfs
  • From: Stefan Wahren <stefan.wahren@xxxxxxxx>
• Re: [PATCH V2 9/9] spi: bcm2835aux: make the polling duration limits configurable
  • From: Stefan Wahren <stefan.wahren@xxxxxxxx>
• Re: [PATCH V2 3/9] spi: bcm2835aux: use BCM2835_AUX_SPI_STAT_RX_LVL
  • From: Stefan Wahren <stefan.wahren@xxxxxxxx>
• Re: [PATCH V2 8/9] spi: bcm2835aux: add driver stats to debugfs
  • From: kernel@xxxxxxxxxxxxxxxx
• Re: [PATCH V2 9/9] spi: bcm2835aux: make the polling duration limits configurable
  • From: kernel@xxxxxxxxxxxxxxxx
• Re: [PATCH V2 9/9] spi: bcm2835aux: make the polling duration limits configurable
  • From: Stefan Wahren <stefan.wahren@xxxxxxxx>
• Re: [PATCH V2 8/9] spi: bcm2835aux: add driver stats to debugfs
  • From: Stefan Wahren <stefan.wahren@xxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH v2] spi: mt7621: Move SPI driver out of staging
  • From: Stefan Roese <sr@xxxxxxx>
• Re: [PATCH 3/3] spi: bcm2835: add module parameter to configure minimum length for dma
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Patchwork housekeeping for: spi-devel-general
  • From: patchwork-bot+linux-spi@xxxxxxxxxx
• [PATCH V2 7/9] spi: bcm2835aux: setup gpio-cs to output and correct level during setup
  • From: kernel@xxxxxxxxxxxxxxxx
• [PATCH V2 9/9] spi: bcm2835aux: make the polling duration limits configurable
  • From: kernel@xxxxxxxxxxxxxxxx