Re: [PATCH v4 3/3] fpga: Add fpga manager driver for ARRI Altera FPP

[Anatolij Gustschin <agust@xxxxxxx>]

Hi Moritz,

On Mon, 8 Apr 2019 11:05:49 -0700
Moritz Fischer mdf@xxxxxxxxxx wrote:

>Hi Anatolij,
>
>looks mostly good, a couple of nits inline.

Thanks for review.

...
>> +++ b/drivers/fpga/ftdi-fifo-fpp.c
>> @@ -0,0 +1,594 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Altera FPGA firmware upload via FPP using FT232H Bitbang/FT245-FIFO.
>> + *
>> + * Copyright (C) 2017 - 2018 DENX Software Engineering  
>Maybe bump that to 2019 ;-)

I'll update it in next version.

...
>> +	gpiod_set_raw_value_cansleep(priv->nconfig, 1);
>> +	gpiod_set_raw_value_cansleep(priv->conf_done, 0);
>> +	msleep(50);  
>
>You could use a constant here for the 50 ...

Do you mean something like below?

  const unsigned int wait_50ms = 50;
  ...
  msleep(wait_50ms);

...
>and here ...
>> +	gpiod_set_value_cansleep(priv->nconfig, 1);
>> +	msleep(50);  
>and here ...
>> +	gpiod_set_value_cansleep(priv->nconfig, 0);
>> +
>> +	/* Wait for CONF_DONE to get low */  
>Does the retry number come from datasheet?

No, it is an empirical value.

...
>> +	if (!retries) {
>> +		dev_warn(dev, "CONF_DONE wait timeout\n");  
>
>warn or err?

err fits better here, I'll update to dev_err().

...
>> +	struct fpp_fpga_mgr_priv *priv = mgr->priv;
>> +	struct device *dev = &priv->pdev->dev;
>> +	int retries = MAX_RETRIES;
>> +	int ret;
>> +	u8 mask, status;  
>
>Can you swap the two lines, reverse xmas-tree please.

Will do in v5.

Thanks,
Anatolij