Re: [PATCH v9 2/3] spi: Add Renesas R-Car Gen3 RPC-IF SPI controller driver

[Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>]

On 05/14/2019 10:06 PM, Sergei Shtylyov wrote:

[...]
>>>>>>>> Have you tested reading? v8 patch still works while v9 patches
>>>>>>>> hang on doing:
>>>>>>>>
>>>>>>>> $ cat /dev/mtd<n>...
>>>>>>>
>>>>>>>    Sorry, 'od -x', not 'cat'.
>>>>>>
>>>>>> root@draak:/# cat /proc/mtd
>>>>>> dev:    size   erasesize  name
>>>>>> mtd0: 00040000 00001000 "Bank 1 - Boot parameter"
>>>>>> mtd1: 00140000 00001000 "Bank 1 - Loader-BL2"
>>>>>> mtd2: 00040000 00001000 "Bank 1 - Certification"
>>>>>> mtd3: 00080000 00001000 "Bank 1 - ARM Trusted FW"
>>>>>> mtd4: 00400000 00001000 "Bank 1 - Reserved-1"
>>>>>> mtd5: 00300000 00001000 "Bank 1 - U-Boot"
>>>>>> mtd6: 00200000 00001000 "Bank 1 - Reserved-2"
>>>>>> mtd7: 00480000 00001000 "Bank 1 - Splash"
>>>>>> mtd8: 00040000 00001000 "Bank 1 - Device Tree"
>>>>>> root@draak:/# od -x /dev/mtd1
>>>>>> 0000000 0000 d280 0001 d280 0002 d280 0003 d280
>>>>>> 0000020 0004 d280 0005 d280 0006 d280 0007 d280
>>>>>> 0000040 0008 d280 0009 d280 000a d280 000b d280
>>>>>> 0000060 000c d280 000d d280 000e d280 000f d280
>>>>>> 0000100 0010 d280 0011 d280 0012 d280 0013 d280
>>>>>> 0000120 0014 d280 0015 d280 0016 d280 0017 d280
>>>>>> 0000140 0018 d280 0019 d280 001a d280 001b d280
>>>>>> 0000160 001c d280 001d d280 001e d280 1000 d53e
>>>>>> 0000200 f800 9266 1000 d51e 3fdf d503 3ba0 1005
>>>>>
>>>>>    Still hangs for me. After I patches spi-mem.c and the driver to
>>>>> call RPM for the MFD, it started working again. Perhaps, that clock>> >> is still enabled on your target. What does the following print (for
> 
>    Even with these issues worked around, I still see strange behavior on
> writes, e.g. after I mount JFFS2 partition, remove 1 file, unmount, re-mount,
> and mount again, the removed file is back! :-/

   Too many re-mounts, one was enough. :-)

> [...]
> 
>> thanks & best regards,
>> Mason

MBR, Sergei