Re: [PATCH v3 2/4] mtd: rawnand: Add Macronix MX25F0A NAND controller

[masonccyang@xxxxxxxxxxx]

Hi Miquel, 


> > > > > > > > > How to make all #CS keep high for NAND to enter 
> > > > > > > > > low-power standby mode if driver don't use 
> > "legacy.select_chip()" 
> > > > > ? 
> > > > > > > > 
> > > > > > > > See commit 02b4a52604a4 ("mtd: rawnand: Make 
->select_chip() 
> > > > > optional 
> > > > > > > > when ->exec_op() is implemented") which states:
> > > > > > > > 
> > > > > > > >         "When [->select_chip() is] not implemented, the 
core 
> > is 
> > > > > assuming 
> > > > > > > >    the CS line is automatically asserted/deasserted by the 
 
> > driver 
> > > > > > > >    ->exec_op() implementation." 
> > > > > > > > 
> > > > > > > > Of course, the above is right only when the controller 
driver 
> > 
> > > > > supports 
> > > > > > > > the ->exec_op() interface. 
> > > > > > > 
> > > > > > > Currently, it seems that we will get the incorrect data and  

> > error
> > > > > > > operation due to CS in error toggling if CS line is 
controlled 
> > in 
> > > > > > > ->exec_op(). 
> > > 
> > > Oh, and please provide the modifications you added on top of this 
patch.
> > > Right now we're speculating on what you've done which is definitely 
not
> > > an efficient way to debug this sort of issues. 
> > 
> 
> We really need to see the datasheet of the NAND chip which has a
> problem and how this LPM mode is advertized to understand what the
> chip expects and eventually how to work-around it.
> 
> > The patch is to add in beginning of ->exec_op() to control CS# low and 

> > before return from ->exec_op() to control CS# High.
> > i.e,.
> > static in mxic_nand_exec_op( )
> > {
> >  cs_to_low();
> > 
> > 
> > 
> >  cs_to_high();
> >  return;
> > }
> > 
> > But for nand_onfi_detect(), 
> > it calls nand_read_param_page_op() and then nand_read_data_op().
> > mxic_nand_exec_op() be called twice for nand_onfi_detect()
> 
> Yes, this is expected and usually chips don't care.

As I replied to Boris's email previously.
I think I have fixed the problem and the root cause is the our NFC's TX 
FIFO 
counter do a unnecessary reset in CS control function.
currently, doing CS# control in ->exec_op() is OK to me.

In addition, by Jones's comments about MFD, 
I will re-submit this raw NAND ctlr driver instead of MFD and raw-nand. 
----------------------------------------------------------------------->
MFD is for registering child devices of chips which offer 
genuine cross-subsystem functionality. 

It is not designed for mode selecting, or as a place to shove shared code 
just because a better location doesn't appear to exist. 
------------------------------------------------------------------------<

thanks & best regards,
Mason






CONFIDENTIALITY NOTE:

This e-mail and any attachments may contain confidential information 
and/or personal data, which is protected by applicable laws. Please be 
reminded that duplication, disclosure, distribution, or use of this e-mail 
(and/or its attachments) or any part thereof is prohibited. If you receive 
this e-mail in error, please notify us immediately and delete this mail as 
well as its attachment(s) from your system. In addition, please be 
informed that collection, processing, and/or use of personal data is 
prohibited unless expressly permitted by personal data protection laws. 
Thank you for your attention and cooperation.

Macronix International Co., Ltd.

=====================================================================



============================================================================

CONFIDENTIALITY NOTE:

This e-mail and any attachments may contain confidential information and/or personal data, which is protected by applicable laws. Please be reminded that duplication, disclosure, distribution, or use of this e-mail (and/or its attachments) or any part thereof is prohibited. If you receive this e-mail in error, please notify us immediately and delete this mail as well as its attachment(s) from your system. In addition, please be informed that collection, processing, and/or use of personal data is prohibited unless expressly permitted by personal data protection laws. Thank you for your attention and cooperation.

Macronix International Co., Ltd.

=====================================================================